Database Info

[Q] Its new and big problem.. Galaxy fit not working at all

I started kies and after connecting my Galaxy FIT, I started upgrading the firmware it showed. Then it stopped and asked for emergency recovery. I did it, but it stopped again and phone got switched off and after that it is only showing a error sign with yellow triangle between a PC and mobile. It is not showing anything else though I have tried switching off and taking out battery. It is not working at all, just the error sign. Please help.

Sounds like a "soft Bricked" phone.
Can you boot in to download mode?
Press Volume Down + Home Key (middle button) + Power Button at the same time.
If the phone boots you into download mode (a yellow triagle with a digging android) with words "Downloading"....
Then you can still revive your phone.

this happened to me once..but later i tried pulling off the battery and restarting the sysytem...
try to take off the battrery and plug it again and try to go in DOWNLOAD MODE!..(i did it 2 or 3 times)
..and its definitely not a "SOFT BRICK" '!!
galaxy fit + CM7.1 (2.3.7) + 801Mhz

same happened to me
when first i flashed cyanogen 7.1 , 2.3.7 it happened to me, i just give tha droid a factory reset then following the instructions i flashed the rom from sd card via recovery then when reboot , just came up the cyanogen logo then tha lil letters(android) but just sttoped there no more, i taked out the lbatt, twice, then the alert logo came up......i was so scared.....sh-t !
but then i just remember to go to download mode pressing home , volume + and on/off then i reflash via odin but nothin happened, then y reestart the fir then i try to open in recovery i pushed home key and on/off and the cyanogen recovery just started i gave the phone again not only a data factory reset but, cache and the battery and everything i could reset, then i do it again thru recovery i flased the cyanogen and at las it works, i think like richard says was a soft bricked, try everything , via odin, via recovery.......
i thanks neil cause he helped me a lot!!!

[Q] samsung i5800 doesnt start

I have just rooted my samsung i5800 and it worked only when i turn it off it doesnt turn on again because its just stuck on the screen GT-i5800 samsung . thats all i see . and i cant even turn it off . i can only take the battery out

Try on and off for a few times...
If not work, time to go for data wipe or factory reset (if you have a Cwm kernel)
Or finally, time to reinstall the rom...

Go in download mod,and reflash your ROM...

Whitch ROM did you flash ?

103580marnix said:
I have just rooted my samsung i5800 and it worked only when i turn it off it doesnt turn on again because its just stuck on the screen GT-i5800 samsung . thats all i see . and i cant even turn it off . i can only take the battery out
Click to expand...
Click to collapse
Off your phone, hold volume up+down and home key and power to boot into recovery and just factory reset from there.
Cheers
Sent from my GT-i9003 powered by MIUI

[HELP] about rooting

i rooted my phone before with amits universal GB CF
i noticed that the 3 button recovery dont work anymore... is this normal? do i have to click CWM always in apps drawer instead of the 3 button to go into recover?
secondly, my brother wants his i9003 rooted too
he is also on DXKP9, and DONT want another firmware on his phone like XXKPQ
i was planning on using UC-Kernel on it, would it be possible that it will work on stock DXKP9 without issues? i read that UC-kernel already has CF.ROOT and touch CWM Recovery with it but its for XXKPQ..... interested to know on issues related to DXKP9 if any before i flash.
and lastly...whats the difference with UC-Kernel v9 1009...2009 and 3009 ?

IMP : Before you do anything make a backup
1) No that is not normal. May be you aren't pressing the buttons properly.
2) Follow the procedure to go to recovery. Press the Volume Up key + Menu key and then pressing the former two keys you need to power ON the device after which you will see the recovery screen.
3) I think UC-Kernal is universal. May be it works. Im not sure. Why dont you try and let others know ? or you can wait till someone who has flashed that firmware and UC-Kernel to answer.
4) And about UC-Kernel v9 1009...2009 and 3009 , those are 3 test versions of the kernel with different voltages supplied. For more details on that check this post by "inciongd". He's explained it beautifully.
http://forum.xda-developers.com/showthread.php?t=1357747&highlight=overclock&page=110

Do not do the VOL UP+MENU+POWER while your device is ON. Turn it OFF and then press VOL UP+MENU first then hold the POWER button until you see the samsung logo or until CWM recovery loads up. I was not able to go to recovery mode/download mode until I turn off my device.

thanks for the replies guys
but i already those 3 buttons a few times with phone turned off...already know about this since i go to recovery long ago without CWM when i do hard reset
but im new to CWM and rooting
so i had cleared cache and dalvik cache a few times already
i can only go to recovery via the CWM app
the 3 button recovery dont work for me
my buttons are all working...
the problem is when i do the 3 button recovery, it goes to samsung logo, fades for a few seconds then goes back to samsung logo again...it just vibrates and go back to samsung logo if i keep holding on.
anyone tried the universal GB amit CF.root with touch recovery and experienced the same?

noypi_ako said:
thanks for the replies guys
but i already those 3 buttons a few times with phone turned off...already know about this since i go to recovery long ago without CWM when i do hard reset
but im new to CWM and rooting
so i had cleared cache and dalvik cache a few times already
i can only go to recovery via the CWM app
the 3 button recovery dont work for me
my buttons are all working...
the problem is when i do the 3 button recovery, it goes to samsung logo, fades for a few seconds then goes back to samsung logo again...it just vibrates and go back to samsung logo if i keep holding on.
anyone tried the universal GB amit CF.root with touch recovery and experienced the same?
Click to expand...
Click to collapse
U have the extended power menu too..
but since u mentioned logo fading thingy...
Dude ur pressing the buttons too long..
as soon as u see the samsung logo appear LEAVE the buttons..u will enter the recovery mode..

nope i dont have extended power menu
im not using any custom roms with those, just stock DXKP9
before if i hold it long,it will bring me to recovery mode before i release
after the rooting with universal by amit...it will fade and just boot up
i tried your advice to release it in samsung logo and it will only boot up, tried a few times
also tried releasing it when it starts to fade,also boots up
no recovery

noypi_ako said:
nope i dont have extended power menu
im not using any custom roms with those, just stock DXKP9
before if i hold it long,it will bring me to recovery mode before i release
after the rooting with universal by amit...it will fade and just boot up
i tried your advice to release it in samsung logo and it will only boot up, tried a few times
also tried releasing it when it starts to fade,also boots up
no recovery
Click to expand...
Click to collapse
hmmm...
what is ur present rom?? just tell me dat..i wil tk a dig at it...
Edit-read ur on dxkp9...
make a nandroid and try using xda_bams universal kernel beta9 fix my personal fav...might help.. but its strange y cant u get into cwm.. grrrrrrrrr

you mean i should flash bam kernel over amits universal after i do nandroid backup?
i thought kernels are supposed to be flashed on clean stocks only as ive read

noypi_ako said:
you mean i should flash bam kernel over amits universal after i do nandroid backup?
i thought kernels are supposed to be flashed on clean stocks only as ive read
Click to expand...
Click to collapse
flash bam...wipe caches...and wipe data too...if u get FC's..
it shud work i suppose..!
i did it fr a frnd.. just wiped caches..and factory reset..

[Q] samsung galaxy S3 AT&t dead

i am a noob i rooted my ph and installed 5 custom ROM's. The last one i installed was cm 10.1. I tried to install another ROM sudden it went blank.. nothing is showing up. my screen is completely black.
even if i press the volume up + home + power / volume down + home + power/ just the power key it is not working not even vibrating . please help me.. I used cwm in the beginning and later i installed goomanager to install cm 10.1.
please help me with this issue thanks in advacne http://forum.xda-developers.com/images/icons/icon14.gif

galaxy s6 sm-920f rom installed but stuck in samsung logo

hello xda-developers
(i did not try to downgrade from 5.1.1 to 5.0.2)
this is my problem ; with GALAXY S6 SM-G920 FZKAXEF
- my IMEI was changed for no reason i was talking on the phone and everything then my phone did emergency call only the phone is brand new
- i did factory reset on the phone
- i waited him to reboot and i hold up volume + home button i end up in recovery mode
- i wiped cache + i did again factory reset
- then i rebooted my phone i hold volume down + home i ended in download mode
- i flashed him with correct 5.1.1 firmware ( sammobile.com/firmwares/download/48616/G920FXXU2BOFJ_G920FOXA2BOFJ_XEF/ )
- flashed Odin successful ( s22.postimg.org/h4swu8oxt/Untitled.jpg )
- now am stuck in boot Samsung logo for hours ( movilzona.es/wp-content/uploads/2014/02/cuerpo-samsung-galaxy-s5-android.jpg )
- i flashed it again again and again still stuck...
- i try Smart Switch but the same....successful but when booting up ....stuck on samsung logo with no animation only like this ( movilzona.es/wp-content/uploads/2014/02/cuerpo-samsung-galaxy-s5-android.jpg )
any one can help me what i just did here ?
and my phone can go on download mode and recovery mode
so can i get it back if i flashed him with z3x box or Octoplus Box
any one can give me a original kernel or radio or any thing i can try on this because its a brick now so before i smash this crap in to the wall i must try some stuff on him
thank you

I'm actually stuck on this as well, I tried to update my bootloader and modem and now I'm stuck in the samsung logo screen. I'm gonna keep searching and I'll let you know if I find a fix.

goshjosh said:
I'm actually stuck on this as well, I tried to update my bootloader and modem and now I'm stuck in the samsung logo screen. I'm gonna keep searching and I'll let you know if I find a fix.
Click to expand...
Click to collapse
wow finally i fixed problem ! after 3 days of searching and random flashing anything i found on Google !
but i fixed it this is how !
just follow me and you gonna be ok
before you do this you gonna end with rooted device! but it gonna be fixed
1 - install correct ROM with Odin ( download your correct firmware on sammobile
2 - let him boot up and you gonna end up stuck in Samsung logo (don't worry)
3 - hold volume up + volume down + home buttons +power button when the display turned off release volume up but keep holding
volume down + home button +power button
4- now you are in download mode ( press button up to continue )
5- now download S6_UniBase_v2_BOG8-ODIN.tar copy paste this link onyourbrowser androidfilehost.com/?fid=24052804347777673
6- flash S6_UniBase_v2_BOG8-ODIN.tar with Odin
7- enjoy your phone is fixed

tazaga said:
wow finally i fixed problem ! after 3 days of searching and random flashing anything i found on Google !
but i fixed it this is how !
just follow me and you gonna be ok
1 - install correct ROM with Odin ( download your correct firmware on sammobile
2 - let him boot up and you gonna end up stuck in Samsung logo (don't worry)
3 - hold volume up + volume down + home buttons +power button when the display turned off release volume up but keep holding
volume down + home button +power button
4- now you are in download mode ( press button up to continue )
5- now download S6_UniBase_v2_BOG8-ODIN.tar copy paste this link onyourbrowser androidfilehost.com/?fid=24052804347777673
6- flash S6_UniBase_v2_BOG8-ODIN.tar with Odin
7- enjoy your phone is fixed
Click to expand...
Click to collapse
Thanks! I actually JUST finished doing another fix I found which just involved flashing the stock firmware from sammobile! http://forum.xda-developers.com/galaxy-s6/help/galaxy-s6-920f-bricked-t3148752 that's the link for anyone else who is having the issue.

goshjosh said:
Thanks! I actually JUST finished doing another fix I found which just involved flashing the stock firmware from sammobile! http://forum.xda-developers.com/galaxy-s6/help/galaxy-s6-920f-bricked-t3148752 that's the link for anyone else who is having the issue.
Click to expand...
Click to collapse
did you fixed it ??
because i did and i just end with rooted official firmware 5.1.1 LOOOOOOOOL

I though that I won't find someone with such a problem! i can't find this S6_UniBase_v2_BOG8-ODIN, can I download different kernels for my S6?