i am a noob i rooted my ph and installed 5 custom ROM's. The last one i installed was cm 10.1. I tried to install another ROM sudden it went blank.. nothing is showing up. my screen is completely black.
even if i press the volume up + home + power / volume down + home + power/ just the power key it is not working not even vibrating . please help me.. I used cwm in the beginning and later i installed goomanager to install cm 10.1.
please help me with this issue thanks in advacne http://forum.xda-developers.com/images/icons/icon14.gif
Related
Hey guys i just got my new samsung galaxy s i9000 yesterday and i rooted it today and everything was fine, but then i uses SGS kernel flasher and flashed slayerh kernel and now i cant even get the phone to boot up, all i can do is hold down the volume button +power + home which gets me into a screen where it says Downloading do not turn off target!!, What do i do ?? Please tell me i didnt ruin this phone..
you are in download mode, at this mode you can connect to odin or heimdall to get you out of that trouble you are in
thats volume down + home + power
try volume up + home + power to get into recovery....
read up on flashing here so you can be guided to revive it. don't worry your phone is far from bricked
nothing happens when i press volume up, just the loading little white circle thingy it goes off and comes back on.. What do you mean odin ?
anyone please? Been looking for hours this is ******
Would this guide work ? Section B ?
http://forum.xda-developers.com/showthread.php?t=926399
press those buttons together then release
I started kies and after connecting my Galaxy FIT, I started upgrading the firmware it showed. Then it stopped and asked for emergency recovery. I did it, but it stopped again and phone got switched off and after that it is only showing a error sign with yellow triangle between a PC and mobile. It is not showing anything else though I have tried switching off and taking out battery. It is not working at all, just the error sign. Please help.
Sounds like a "soft Bricked" phone.
Can you boot in to download mode?
Press Volume Down + Home Key (middle button) + Power Button at the same time.
If the phone boots you into download mode (a yellow triagle with a digging android) with words "Downloading"....
Then you can still revive your phone.
this happened to me once..but later i tried pulling off the battery and restarting the sysytem...
try to take off the battrery and plug it again and try to go in DOWNLOAD MODE!..(i did it 2 or 3 times)
..and its definitely not a "SOFT BRICK" '!!
galaxy fit + CM7.1 (2.3.7) + 801Mhz
same happened to me
when first i flashed cyanogen 7.1 , 2.3.7 it happened to me, i just give tha droid a factory reset then following the instructions i flashed the rom from sd card via recovery then when reboot , just came up the cyanogen logo then tha lil letters(android) but just sttoped there no more, i taked out the lbatt, twice, then the alert logo came up......i was so scared.....sh-t !
but then i just remember to go to download mode pressing home , volume + and on/off then i reflash via odin but nothin happened, then y reestart the fir then i try to open in recovery i pushed home key and on/off and the cyanogen recovery just started i gave the phone again not only a data factory reset but, cache and the battery and everything i could reset, then i do it again thru recovery i flased the cyanogen and at las it works, i think like richard says was a soft bricked, try everything , via odin, via recovery.......
i thanks neil cause he helped me a lot!!!
Hi
I cannot get my Samsung Galaxy Tab 7.0 Plus (GT-P6200) to boot in recovery mode.
I tried the following:
1) Switch off the Tab.
2) Press the Power + Volume Up buttons simultaneously until I see the "Samsung Galaxy Tab 7.0 Plus" screen, then release the Power button and keep pressing the Volume Up button. The tab then get's stuck on the Samsung screen, even if I release the Volume Up button. It stays on this screen indefinitely, only option is to reboot by keeping the power button pressed for 5 seconds.
Any help will be appreciated.
Thanks!
same issue
I am having the same issue as well. My tab gets stuck on the "Samsung Galaxy Tab 7.0 Plus" screen and does not move on from that. When i try to boot in recovery mode the screen is just black and slightly illuminated. Please help
Ces123 said:
Hi
I cannot get my Samsung Galaxy Tab 7.0 Plus (GT-P6200) to boot in recovery mode.
I tried the following:
1) Switch off the Tab.
2) Press the Power + Volume Up buttons simultaneously until I see the "Samsung Galaxy Tab 7.0 Plus" screen, then release the Power button and keep pressing the Volume Up button. The tab then get's stuck on the Samsung screen, even if I release the Volume Up button. It stays on this screen indefinitely, only option is to reboot by keeping the power button pressed for 5 seconds.
Any help will be appreciated.
Thanks!
Click to expand...
Click to collapse
Same problem
any help ???
On which verison thar ur on???? have u tried to wiping data in stock recovery
??
same problem I'm having with my Samsung Gt-p6200, it just boot-loops to the "samsung galaxy tab 7.0" boot loading screen and hangs.. these happened after i flashed my firmware from stock honeycomb to jellybean(the austria firmware, i think that's been posted in this forum).
here's what happened before the problem:
-I flash the stock honeycomb firmware with the jellybean one that i found here..
-after i flashed using ODIN, the new firmware works great, i was even informed that i have free 50GB worth of dropbox space,
the file was named P6200XXMC3_P6200OXAMC3_ATO
- I have used it for a day, until the battery drains and i have to charge, but when i opened it again, it already does this "boot loop" problem
- i have tried flashing CWM with ODIN(as i've read here somewhere that it might help) and do that wipe cache and factory reset thing but that didnt help solved the problem.
hope anyone could help me, im also thinking flashing it back to it's original stock firmware but I dont have a backup of that and I dont know where to get one, I've been searching the net for two days for that stock rom but all i found are the new jellybean ones and some old ones but is uploaded to hotfile which is now deleted or locked.
I hope you guys could help me out and thanks in advance!
try flashing a new , latest firmware on odin
just try it.
ovox0 said:
I am having the same issue as well. My tab gets stuck on the "Samsung Galaxy Tab 7.0 Plus" screen and does not move on from that. When i try to boot in recovery mode the screen is just black and slightly illuminated. Please help
Click to expand...
Click to collapse
Hello guys! Im also having this same issue.
*Using the same firmware that was posted here in xda because i was having trouble downloading those official jellybean firmwares
*The battery got drained
then if i charge it, it will remain in a "blank slightly illuminated screen"
* after a few munutes, the tab gets really warm.
*but if i dont charge it, it will get drained again because it keeps on turning on itself back to this time to the "galaxy tab plus screen"
I cant access recovery mode.
I can access odin mode and can flash successfully with cwm or the same firmware back but the problem still persist.
I havent tried other firmwares though.
4 days passed already and i cant figure this out
Please help
So I had this happen to me yesterday, where it rebooted randomly on me, only to freeze on the Galaxy Tab 7.0 Plus screen. I had custom recovery (TWRP) don't know if that matters, but I was able to access it by holding Power+UpVol but keep it held. It would freeze on the same spot but since I was still holding the keys it reboots a second time and this time it would go into recovery.
I then wipes cache and dalvik, no go. Sadly did a full wipe. Still no going past the tab plus text. So I flash MF1 official 4.1.2 firmware (I was previously on 4.1.2 UK official) still no go. Put in latest 2.8 TWRP and booted into it still with some trouble as I mentioned above. Did another wipe and it then hung on blank screen or so I thought. Took a long time to boot and after a long time, and the Android is upgrading message, by some weird chance I was on the MF1 official rom but all my apps settings everything was saved.
Working 100% now and I still don't really know what the hell happened. But if this helps anyone then all the better!
My samsung p6200 is woking almost fine but i am not able to go into the download mode when i press volume down button and power the screen is at samsung logo it stays for a while and then it restarts from there,its the stock rom that's messd up i belive any help how to go into downlod mose other way would b apriciated
Hi all. I have a Galaxy S4 on Sprint and rooted it months ago, still running Jellybean 4.3. Never had any issues with the root until I tried to overclock it just now.
-I was using this guide: http://theunlockr.com/2013/11/15/overclock-samsung-galaxy-s4-sprint/
and followed each step carefully.
-I downloaded the actual kernel from http://forum.xda-developers.com/showthread.php?t=2288309
and used the "AOSP JELLYBEAN 4.3 VERSION".
After the kernel was flashed, I selected reboot. I get the "Samsung Galaxy S4" boot screen but then nothing happens.
I tried holding up volume and power button but it does the same thing.
Need some help! I hope I didn't brick my phone..
FIXED BY HOLDING VOLUME UP, HOME BUTTON AND POWER BUTTON. TOOK FINGER OFF POWER BUTTON WHEN SAMSUNG GALAXY 4 SCREEN LOADED. RESTORED BACKUP.
Hello, I think I have bricked my phone.
It is a Samsung Galaxy A3 SM-A300M
I used the TWRP Manager app and I think I loaded the wrong recovery image for my phone.
The app said it installed the recovery succesfully then asked to reboot into recovery. I accepted and the phone rebooted but never entered recovery, it just vibrates every 2 seconds.
Now it wont show anything on the screen, just vibrates every 2 seconds
I've tried the following with no success:
1) holding volume up + power + home
2) holding volume down + power + home
3) holding volume up + power
4) holding volume down + power
5) holding power button for more than 2 minutes
In every case it just keeps vibrating
Please consider that the Samsung Galaxy A3 is a unibody model, so I can't take out the battery.
What would you say are my options?
Thanks in advance!!
P.S.: I would post this on the Samsung A series sub forum, but since I'm a new user can only post here.
EmilioBravo said:
Hello, I think I have bricked my phone.
It is a Samsung Galaxy A3 SM-A300M
I used the TWRP Manager app and I think I loaded the wrong recovery image for my phone.
The app said it installed the recovery succesfully then asked to reboot into recovery. I accepted and the phone rebooted but never entered recovery, it just vibrates every 2 seconds.
Now it wont show anything on the screen, just vibrates every 2 seconds
I've tried the following with no success:
1) holding volume up + power + home
2) holding volume down + power + home
3) holding volume up + power
4) holding volume down + power
5) holding power button for more than 2 minutes
In every case it just keeps vibrating
Please consider that the Samsung Galaxy A3 is a unibody model, so I can't take out the battery.
What would you say are my options?
Thanks in advance!!
P.S.: I would post this on the Samsung A series sub forum, but since I'm a new user can only post here.
Click to expand...
Click to collapse
Hi,
Thank you for using XDA assist
It looks like there is no dedicated forum for your device. However there is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get the expert's help
Good luck