I unlocked and rooted my Evita , i committed a mistake by not backing-up my stock sense rom, now i need to get back to the stock , and i couldn't find RUU for my phone,
things that i have : OTA update to 4.2.2 Sense 5 ; Backup for Old 4.1.1 Sense 4 Rom
now i have AOSP Paranoid android ,
bootloader details:
Evita PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.150000
RADIO-1.30a.32.45.18
OpenDSP-v33.1.0.45.1128
eMMC-boot
Aug 7 2013,16:28:08:-1
i have TWRP recovery v2.6.3.0
So what should i do?
and thanks in advance.
Run an Evita RUU, that'll take you back to stock.
http://androidruu.com/?developer=Evita
Sent from my Evita
39356364 28
timmaaa said:
Run an Evita RUU, that'll take you back to stock.
http://androidruu.com/?developer=Evita
Sent from my Evita
Click to expand...
Click to collapse
these RUUs will install the 4.1.1 Sense 4 stock right?
the question that i forgot to ask that will there be a problem if i run an old RUU although i've updated my phone to sense 5 before ,and all info in the bootloader changed?
It depends which RUU you run. You're s-off so you can run any Evita RUU, whether it's a forwards or backwards step. Just make sure you choose the right RUU (the 3.17/3.18 ones are Android 4.1 and Sense 4+) and you'll be fine.
Sent from my Evita
No there will be no problem since you have s-off. Nothing in your bootloader will change. The bootloader will remain unlocked. Your cid will remain supercid and you will still be s-off. You can run older or newer RUUs without consequence.
Sent from my One XL using xda app-developers app
Thanks Guys :good:
Related
Hi All,
I need to restore my unlocked/rooted HOX back to ATT stock. Looking at this thread:
http://forum.xda-developers.com/showthread.php?t=1814217
I am unclear if I need to lock/unroot before installing the stock ROM or I just install over what I have. Can somebody confirm how I can restore to 100% stock?
Thanks!
lokicat said:
Hi All,
I need to restore my unlocked/rooted HOX back to ATT stock. Looking at this thread:
http://forum.xda-developers.com/showthread.php?t=1814217
I am unclear if I need to lock/unroot before installing the stock ROM or I just install over what I have. Can somebody confirm how I can restore to 100% stock?
Thanks!
Click to expand...
Click to collapse
How are you installing the stock ROM? I have a RUU that HTC sent me that does all the installation and other stuff with one click, but I had to relock my bootloader before it would work properly.
"fastboot oem lock" in bootloader then run the ruu. to unlock/root again just flash your unlock token in fastboot again using "fastboot flash unlocktoken Unlock_code.bin", flash twrp, then flash CWM-SuperSU-v0.99.zip in recovery.
super easy and super quick
Thanks for the help. I will re-lock the boot loader and simply install the stock RUU.
Help to restore stock att rom
Hello guys I was wondering if you could help me out to restore me HOX back to the stock ROM
Gared9 said:
Hello guys I was wondering if you could help me out to restore me HOX back to the stock ROM
Click to expand...
Click to collapse
Bootloader details please.
Transmitted via Bacon
timmaaa said:
Bootloader details please.
Transmitted via Bacon
Click to expand...
Click to collapse
these are my details
***unlocked***
EVITA PVT SHIP S-OFF RL
CID-111111111
HBOOT-2.18.0000
RADIO-1.35a.32.45.1128
eMMC-boot
Android Version 4.2.2
HTC Sense Version 5.0
Software Number ViperXL 4.2.0
Kernel Version 3.4.10-g08ef01e
Gared9 said:
these are my details
***unlocked***
EVITA PVT SHIP S-OFF RL
CID-111111111
HBOOT-2.18.0000
RADIO-1.35a.32.45.1128
eMMC-boot
Android Version 4.2.2
HTC Sense Version 5.0
Software Number ViperXL 4.2.0
Kernel Version 3.4.10-g08ef01e
Click to expand...
Click to collapse
Just run this RUU:
5.18 RUU
He's an RUU Tutorial
http://forum.xda-developers.com/showthread.php?t=2593037
If the phone doesn't boot after running it once, just run it again.
Thank you Timmaaa. I will try this and let you know if I have any other questions...
Hey guys,
Basically I've been running Viper 3 for a couple days, but Am looking at changing phones, So I want to relock my one xl. The back up i have is a 2.40 telstra stock, but it has custom recovery.
Whenever I try to relock it fails with a security warning. Its really doing my head in
Phone is currently
EVITA PVT SHIP S-ON RL
HBOOT -1.14.0002
RADIO-0.20os.32.09.15
OpenDSP-v29.1.0.45.0622
eMMC-boot
I've tried fastboot oem lock and fails.
I've tried installing an stock odex 2.40 rom, which still fails to relock
Any idea? I would love to update the phone to Telstra JB before selling it.
Cheers Steve
GT69 said:
Hey guys,
Basically I've been running Viper 3 for a couple days, but Am looking at changing phones, So I want to relock my one xl. The back up i have is a 2.40 telstra stock, but it has custom recovery.
Whenever I try to relock it fails with a security warning. Its really doing my head in
Phone is currently
EVITA PVT SHIP S-ON RL
HBOOT -1.14.0002
RADIO-0.20os.32.09.15
OpenDSP-v29.1.0.45.0622
eMMC-boot
I've tried fastboot oem lock and fails.
I've tried installing an stock odex 2.40 rom, which still fails to relock
Any idea? I would love to update the phone to Telstra JB before selling it.
Cheers Steve
Click to expand...
Click to collapse
Reflash the stock HTC recovery and then retry locking the BL
sent from my envenomed HTC One XL running ViperXL 3.2.1
Kole_Ackerson said:
Reflash the stock HTC recovery and then retry locking the BL
sent from my envenomed HTC One XL running ViperXL 3.2.1
Click to expand...
Click to collapse
You can try fastboot erase cache, Then the lock command.
Sent from my One X using xda app-developers app
What is the stock recovery? I've found some for the international versions, but not evita.
Hi. I'm selling my phone since I've bought HTC One Black. So... is there a way to erase everything and make it as it was stock?
Guess I need to do this:
1. S-Off to S-On
2. Flash this: villec2-jb-crc-3.4.10-055bd56.zip from http://www.htcdev.com/devcenter/downloads
3. Remove root
?
I just received an OTA update but it can't be installed, so therefore I want to make it stock so that the new user won't experience any problems...
mikaelft said:
Hi. I'm selling my phone since I've bought HTC One Black. So... is there a way to erase everything and make it as it was stock?
Guess I need to do this:
1. S-Off to S-On
2. Flash this: villec2-jb-crc-3.4.10-055bd56.zip from http://www.htcdev.com/devcenter/downloads
3. Remove root
?
I just received an OTA update but it can't be installed, so therefore I want to make it stock so that the new user won't experience any problems...
Click to expand...
Click to collapse
Your are S-OFF?
So you need to follow this instrucition:
http://androidforums.com/one-s-all-things-root/691213-how-get-back-stock-facepalm-s-off.html
Some phones early phones were shipped S-Off. You do not need to S-Off. Just go back to stock and change the bootloader back to locked.
Sent from my HTC One S using xda premium
kylepont said:
Some phones early phones were shipped S-Off. You do not need to S-Off. Just go back to stock and change the bootloader back to locked.
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Ok.
Then I will flash the RUU i downloaded from htcdev.com
Where do I get stock bootlocker?
mikaelft said:
Ok.
Then I will flash the RUU i downloaded from htcdev.com
Where do I get stock bootlocker?
Click to expand...
Click to collapse
You have a stock bootloader. I take it you mean a stock recovery. Google HTC Ville S4 Stock Recovery and explore.
kylepont said:
You have a stock bootloader. I take it you mean a stock recovery. Google HTC Ville S4 Stock Recovery and explore.
Click to expand...
Click to collapse
or get it from me
https://www.dropbox.com/s/btmsslfgbwegu2k/ville_recovery_signed.img
flash stock recovery, relock bootloader and run the ruu.
if the ruu makes any problems while your phone is up, try to boot into fastboot usb and run the ruu again.
dont forget to run the ruu as admin and be sure you have the latest htc sync drivers installed.
good luck
NQNH said:
or get it from me
https://www.dropbox.com/s/btmsslfgbwegu2k/ville_recovery_signed.img
flash stock recovery, relock bootloader and run the ruu.
if the ruu makes any problems while your phone is up, try to boot into fastboot usb and run the ruu again.
dont forget to run the ruu as admin and be sure you have the latest htc sync drivers installed.
good luck
Click to expand...
Click to collapse
Is it the same as villec2-jb-crc-3.4.10-055bd56.zip ?
Or one of these? http://www.androidfiles.org/ruu/?developer=Ville
I also have TWRP
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
Can't be installed :/
I successfully installed this RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed.exe
And got this:
Android: 4.0.4
Sense: 4.1
Programvarenummer: 2.31.401.5
HTC SDK: 4.23
HTC Utvidelse: htcextension_403_1_ga_20
But when installing this RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
I get the error message ERROR [159]. ROM-tool can't update androidphone. Get the right ROM-tool, and try again (translated from Norwegian).
Currently my phone setup is like this:
Recovery: Flashed to stock ville
Info from bootloader:
*** RELOCKED ***
VLE PVT SHIP S-OFF RL
CID: Changed it from Super-CID to my default HTC__Y13
HBOOT-1.14.0002
RADIO-1.06es.50.02.31
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
What else need to be done to get the RUU installed?
mikaelft said:
I successfully installed this RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed.exe
And got this:
Android: 4.0.4
Sense: 4.1
Programvarenummer: 2.31.401.5
HTC SDK: 4.23
HTC Utvidelse: htcextension_403_1_ga_20
But when installing this RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
I get the error message ERROR [159]. ROM-tool can't update androidphone. Get the right ROM-tool, and try again (translated from Norwegian).
Currently my phone setup is like this:
Recovery: Flashed to stock ville
Info from bootloader:
*** RELOCKED ***
VLE PVT SHIP S-OFF RL
CID: Changed it from Super-CID to my default HTC__Y13
HBOOT-1.14.0002
RADIO-1.06es.50.02.31
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
What else need to be done to get the RUU installed?
Click to expand...
Click to collapse
You have to update your HBOOT in order to flash 3.16.401.8 RUU, I've got problems flashing this RUU too. You need hboot 2.15 for this, if you're s-off you can easy update it following this guide http://forum.xda-developers.com/showpost.php?p=39216236&postcount=274 remember to change your CID to SUPER CID: 11111111 or you may have issues flashing hboot.
McGiver93 said:
You have to update your HBOOT in order to flash 3.16.401.8 RUU, I've got problems flashing this RUU too. You need hboot 2.15 for this, if you're s-off you can easy update it following this guide http://forum.xda-developers.com/showpost.php?p=39216236&postcount=274 remember to change your CID to SUPER CID: 11111111 or you may have issues flashing hboot.
Click to expand...
Click to collapse
Thanks. The phone is currently installing the new HBOOT (Green bar showing about 75% done).
mikaelft said:
Thanks. The phone is currently installing the new HBOOT (Green bar showing about 75% done).
Click to expand...
Click to collapse
yeah it's kind a bug you get stuck at 75%, just type in prompt command:
adb reboot bootloader
you should boot into bootloader and see the new hboot version.
McGiver93 said:
yeah it's kind a bug you get stuck at 75%, just type in prompt command:
adb reboot bootloader
you should boot into bootloader and see the new hboot version.
Click to expand...
Click to collapse
Thanks, currently installing 3.16 After this I S-On the phone.
What else should/could I install? Newer radio etc?
Will the phone be able to install OTA updates after this?
After installation:
Android 4.1.1
HTC Sense: 4+
Softwarenumber: 3.16.401.8
HTC SDK API: 4.63
HTC: HTCExtension_Sense45_2
From bootloader:
*** RELOCKED ***
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.11.50.05.28
OpenDSP-v31.1.0.45.0815
eMMC-boot
Dec 14 2012.17:10:57:6355
Should it really say "relocked" ?
mikaelft said:
Thanks, currently installing 3.16
What else should/could I install? Newer radio etc?
Will the phone be able to install OTA updates after this?
Is it safe to S-On now?
After installation:
Android 4.1.1
HTC Sense: 4+
Softwarenumber: 3.16.401.8
HTC SDK API: 4.63
HTC: HTCExtension_Sense45_2
Click to expand...
Click to collapse
you have alredy the new radio installing 3.16.401.8, I wouldn't s-on your phone because it's useless (unless your phone still have warranty)
McGiver93 said:
you have alredy the new radio installing 3.16.401.8, I wouldn't s-on your phone because it's useless (unless your phone still have warranty)
Click to expand...
Click to collapse
RADIO-1.11.50.05.28
Thanks!
Hey guys, here's my current setup.
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-1.13.0000
RADIO-0.16.31501S.17_2
kernel version
3.0.8-01136-g9d2ad31
[email protected] #1
SMP PREEMPT Wed Apr 25 19:50:43 CST 2012
Baseband Version
0.16.31501S.17_2_10.23.31501S.10L
Build number
1.78.401.2CL58751 release-keys
Currently on Ruu ICS
Click to expand...
Click to collapse
My question is, how to I upgrade my phone to jelly bean? I wanna know also if should I upgrade my HBOOT? I'm kinda in a dilemma here because I honestly don't know what to do, Last time I flashed was last year and now I feel totally new again, especially because of this new HBoot upgrade thing. thank you and hope you can help me.
No update needed for jelly bean. CM 10 is a jelly bean based ROM (4.1) that will work for you.
You will need to upgrade your hboot if you plan on using any 3.4 kernels (most 4.2 jelly bean ROMs).
Sent from my One S using xda app-developers app
I have a big problem and can't fixed it
Now I'm on Hboot 2.15 and S-ON and CID:Roger001
I want to S-off or supercid but I'm follow all methods included All in one kits
Supercid after corrected in hex editor and push to sdcard had same cid.
CID ROGER001 and not change to 11111111
So I'm choose S-off without supercid, but its error 99 codes
and no s-off
I want to go back low hboot but now I can't install stock RUU cause ROGER RUU.exe had lower hboot than 2.15
after execute stock RUU it has error
Oh...no.. What should I do?
Anyone help me?,please
I think SuperCID is impossible with 2.15. At least it didn't work for me.
Don't know about s-off.
abracadabra11 said:
No update needed for jelly bean. CM 10 is a jelly bean based ROM (4.1) that will work for you.
You will need to upgrade your hboot if you plan on using any 3.4 kernels (most 4.2 jelly bean ROMs).
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
thanks mate!
kasuma_asuma said:
thanks mate!
Click to expand...
Click to collapse
Latest cm roms require jb firmware because of kernel and hboot checks.
Just read op.
Verstuurd van mijn HTC One S met Tapatalk
add114 said:
I have a big problem and can't fixed it
Now I'm on Hboot 2.15 and S-ON and CID:Roger001
I want to S-off or supercid but I'm follow all methods included All in one kits
Supercid after corrected in hex editor and push to sdcard had same cid.
CID ROGER001 and not change to 11111111
So I'm choose S-off without supercid, but its error 99 codes
and no s-off
I want to go back low hboot but now I can't install stock RUU cause ROGER RUU.exe had lower hboot than 2.15
after execute stock RUU it has error
Oh...no.. What should I do?
Anyone help me?,please
Click to expand...
Click to collapse
To do SuperCID you have to, not just push it back, but also replace a partition by dd command with root privileges. I was on 2.15 and I changed SuperCID then I've just choose RUU that was suggested by Moonshine. Moonshine didn't work but Facepalm eventually did.
my info:
htc one xl
android version 4.2.2
htc sence version 5.0
kernel version 3.4.10
baseband 1.31a
evita pvt ship s-off rl
cid-11111111
hboot- 2.15
radio-1.31a
that's all I just want to have the stock original rom again.
Run an RUU and you'll be back to stock.
Sent from my Evita
timmaaa said:
Run an RUU and you'll be backeverything tock.
Sent from my Evita
Click to expand...
Click to collapse
Ok I'll use 3.18 ruu is that cool? And will it erase everything on my phone ?.
No it won't erase of your personal data (images, music, etc).
Sent from a crappy Samsung because my Evita died