Hey guys, here's my current setup.
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-1.13.0000
RADIO-0.16.31501S.17_2
kernel version
3.0.8-01136-g9d2ad31
[email protected] #1
SMP PREEMPT Wed Apr 25 19:50:43 CST 2012
Baseband Version
0.16.31501S.17_2_10.23.31501S.10L
Build number
1.78.401.2CL58751 release-keys
Currently on Ruu ICS
Click to expand...
Click to collapse
My question is, how to I upgrade my phone to jelly bean? I wanna know also if should I upgrade my HBOOT? I'm kinda in a dilemma here because I honestly don't know what to do, Last time I flashed was last year and now I feel totally new again, especially because of this new HBoot upgrade thing. thank you and hope you can help me.
No update needed for jelly bean. CM 10 is a jelly bean based ROM (4.1) that will work for you.
You will need to upgrade your hboot if you plan on using any 3.4 kernels (most 4.2 jelly bean ROMs).
Sent from my One S using xda app-developers app
I have a big problem and can't fixed it
Now I'm on Hboot 2.15 and S-ON and CID:Roger001
I want to S-off or supercid but I'm follow all methods included All in one kits
Supercid after corrected in hex editor and push to sdcard had same cid.
CID ROGER001 and not change to 11111111
So I'm choose S-off without supercid, but its error 99 codes
and no s-off
I want to go back low hboot but now I can't install stock RUU cause ROGER RUU.exe had lower hboot than 2.15
after execute stock RUU it has error
Oh...no.. What should I do?
Anyone help me?,please
I think SuperCID is impossible with 2.15. At least it didn't work for me.
Don't know about s-off.
abracadabra11 said:
No update needed for jelly bean. CM 10 is a jelly bean based ROM (4.1) that will work for you.
You will need to upgrade your hboot if you plan on using any 3.4 kernels (most 4.2 jelly bean ROMs).
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
thanks mate!
kasuma_asuma said:
thanks mate!
Click to expand...
Click to collapse
Latest cm roms require jb firmware because of kernel and hboot checks.
Just read op.
Verstuurd van mijn HTC One S met Tapatalk
add114 said:
I have a big problem and can't fixed it
Now I'm on Hboot 2.15 and S-ON and CID:Roger001
I want to S-off or supercid but I'm follow all methods included All in one kits
Supercid after corrected in hex editor and push to sdcard had same cid.
CID ROGER001 and not change to 11111111
So I'm choose S-off without supercid, but its error 99 codes
and no s-off
I want to go back low hboot but now I can't install stock RUU cause ROGER RUU.exe had lower hboot than 2.15
after execute stock RUU it has error
Oh...no.. What should I do?
Anyone help me?,please
Click to expand...
Click to collapse
To do SuperCID you have to, not just push it back, but also replace a partition by dd command with root privileges. I was on 2.15 and I changed SuperCID then I've just choose RUU that was suggested by Moonshine. Moonshine didn't work but Facepalm eventually did.
Related
I HAVE MADE A NEW THREAD PLEASE REPLY THERE LINK BELOW
http://forum.xda-developers.com/showthread.php?t=2264388
So long story short -
Basically I deleted my OS and installed a custom until I was able to find a compatible RUU The only probelm is my hboot (Details Below)
------------------------------
**** TAMPERED ****
**** UNLOCKED ****
VLE PVT SHIP S-ON RL
Hboot-2.13.0000
Radio-1.11.50.05.28
Open DSP-v31.1.0.45.0815
eMMC-boot
Nov 20 2012 , 15:44:03,-1
------------------------------
So can any help me find a RUU. And if you can't will I have to
1)SuperCID
2)S-OFF
Then flash a lower RUU
Im On JellyBean 4.1.1
Running Pacman Rom For Htc One S
Im Branded To THREE UK
Thanks All Help Aprriciated
running S4 processor krait
At the moment, there is no compatible RUU. You might want to S-OFF and run a lower RUU, then update.
usaff22 said:
At the moment, there is no compatible RUU. You might want to S-OFF and run a lower RUU, then update.
Click to expand...
Click to collapse
can this in anyway brick my phone via ota updates etc ...? and will my phone be unbranded
i also have to superCID my phone then do the s off right ? thanks
Zaman-The-Man said:
can this in anyway brick my phone via ota updates etc ...? and will my phone be unbranded
i also have to superCID my phone then do the s off right ? thanks
Click to expand...
Click to collapse
Do NOT run OTA while SuperCID, you may brick it.
Get supercid and then s-off, yes.
But flashing ota With supercid can brick your phone.
Change your cid to e.g. HTC__001 if you are in europe before flashing ota.
Sent from my HTC One S using xda premium
NQNH said:
Get supercid and then s-off, yes.
But flashing ota With supercid can brick your phone.
Change your cid to e.g. HTC__001 if you are in europe before flashing ota.
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
so il never be able to update my phone again ? OTA and RUU Updates
i want to go back to stock using ruu as i deleted my OS
after doing supercid then s off i can run a lower ruu but i wont to ota update my phone as i need otg and it doesnt work on ICS so i need jellybean and will my phone be SIM UNLOCKED
Zaman-The-Man said:
i want to go back to stock using ruu as i deleted my OS
after doing supercid then s off i can run a lower ruu but i wont to ota update my phone as i need otg and it doesnt work on ICS so i need jellybean and will my phone be SIM UNLOCKED
Click to expand...
Click to collapse
Just flash the beastmode kernel for otg on ics.
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | ElementalX_4.2
ryanshew said:
Just flash the beastmode kernel for otg on ics.
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | ElementalX_4.2
Click to expand...
Click to collapse
i want jellybean though and i heard as soon as you s off and do superCID you phone becomes unbranded so couldnt i run a unbranded jelly RUU ?
Zaman-The-Man said:
i want jellybean though and i heard as soon as you s off and do superCID you phone becomes unbranded so couldnt i run a unbranded jelly RUU ?
Click to expand...
Click to collapse
SuperCID allows you to run any RUU. However, there have been reports of devices getting bricked whilst updating to Jelly Bean with SuperCID, so I would recommend setting your CID to HTC__001.
Sent from my HTC One S using Tapatalk 2
usaff22 said:
SuperCID allows you to run any RUU. However, there have been reports of devices getting bricked whilst updating to Jelly Bean with SuperCID, so I would recommend setting your CID to HTC__001.
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
Isn't there a RUU That Has The Jellybean Software ?
Zaman-The-Man said:
Isn't there a RUU That Has The Jellybean Software ?
Click to expand...
Click to collapse
Yes.
Hi. I'm selling my phone since I've bought HTC One Black. So... is there a way to erase everything and make it as it was stock?
Guess I need to do this:
1. S-Off to S-On
2. Flash this: villec2-jb-crc-3.4.10-055bd56.zip from http://www.htcdev.com/devcenter/downloads
3. Remove root
?
I just received an OTA update but it can't be installed, so therefore I want to make it stock so that the new user won't experience any problems...
mikaelft said:
Hi. I'm selling my phone since I've bought HTC One Black. So... is there a way to erase everything and make it as it was stock?
Guess I need to do this:
1. S-Off to S-On
2. Flash this: villec2-jb-crc-3.4.10-055bd56.zip from http://www.htcdev.com/devcenter/downloads
3. Remove root
?
I just received an OTA update but it can't be installed, so therefore I want to make it stock so that the new user won't experience any problems...
Click to expand...
Click to collapse
Your are S-OFF?
So you need to follow this instrucition:
http://androidforums.com/one-s-all-things-root/691213-how-get-back-stock-facepalm-s-off.html
Some phones early phones were shipped S-Off. You do not need to S-Off. Just go back to stock and change the bootloader back to locked.
Sent from my HTC One S using xda premium
kylepont said:
Some phones early phones were shipped S-Off. You do not need to S-Off. Just go back to stock and change the bootloader back to locked.
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Ok.
Then I will flash the RUU i downloaded from htcdev.com
Where do I get stock bootlocker?
mikaelft said:
Ok.
Then I will flash the RUU i downloaded from htcdev.com
Where do I get stock bootlocker?
Click to expand...
Click to collapse
You have a stock bootloader. I take it you mean a stock recovery. Google HTC Ville S4 Stock Recovery and explore.
kylepont said:
You have a stock bootloader. I take it you mean a stock recovery. Google HTC Ville S4 Stock Recovery and explore.
Click to expand...
Click to collapse
or get it from me
https://www.dropbox.com/s/btmsslfgbwegu2k/ville_recovery_signed.img
flash stock recovery, relock bootloader and run the ruu.
if the ruu makes any problems while your phone is up, try to boot into fastboot usb and run the ruu again.
dont forget to run the ruu as admin and be sure you have the latest htc sync drivers installed.
good luck
NQNH said:
or get it from me
https://www.dropbox.com/s/btmsslfgbwegu2k/ville_recovery_signed.img
flash stock recovery, relock bootloader and run the ruu.
if the ruu makes any problems while your phone is up, try to boot into fastboot usb and run the ruu again.
dont forget to run the ruu as admin and be sure you have the latest htc sync drivers installed.
good luck
Click to expand...
Click to collapse
Is it the same as villec2-jb-crc-3.4.10-055bd56.zip ?
Or one of these? http://www.androidfiles.org/ruu/?developer=Ville
I also have TWRP
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
Can't be installed :/
I successfully installed this RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed.exe
And got this:
Android: 4.0.4
Sense: 4.1
Programvarenummer: 2.31.401.5
HTC SDK: 4.23
HTC Utvidelse: htcextension_403_1_ga_20
But when installing this RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
I get the error message ERROR [159]. ROM-tool can't update androidphone. Get the right ROM-tool, and try again (translated from Norwegian).
Currently my phone setup is like this:
Recovery: Flashed to stock ville
Info from bootloader:
*** RELOCKED ***
VLE PVT SHIP S-OFF RL
CID: Changed it from Super-CID to my default HTC__Y13
HBOOT-1.14.0002
RADIO-1.06es.50.02.31
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
What else need to be done to get the RUU installed?
mikaelft said:
I successfully installed this RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed.exe
And got this:
Android: 4.0.4
Sense: 4.1
Programvarenummer: 2.31.401.5
HTC SDK: 4.23
HTC Utvidelse: htcextension_403_1_ga_20
But when installing this RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
I get the error message ERROR [159]. ROM-tool can't update androidphone. Get the right ROM-tool, and try again (translated from Norwegian).
Currently my phone setup is like this:
Recovery: Flashed to stock ville
Info from bootloader:
*** RELOCKED ***
VLE PVT SHIP S-OFF RL
CID: Changed it from Super-CID to my default HTC__Y13
HBOOT-1.14.0002
RADIO-1.06es.50.02.31
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
What else need to be done to get the RUU installed?
Click to expand...
Click to collapse
You have to update your HBOOT in order to flash 3.16.401.8 RUU, I've got problems flashing this RUU too. You need hboot 2.15 for this, if you're s-off you can easy update it following this guide http://forum.xda-developers.com/showpost.php?p=39216236&postcount=274 remember to change your CID to SUPER CID: 11111111 or you may have issues flashing hboot.
McGiver93 said:
You have to update your HBOOT in order to flash 3.16.401.8 RUU, I've got problems flashing this RUU too. You need hboot 2.15 for this, if you're s-off you can easy update it following this guide http://forum.xda-developers.com/showpost.php?p=39216236&postcount=274 remember to change your CID to SUPER CID: 11111111 or you may have issues flashing hboot.
Click to expand...
Click to collapse
Thanks. The phone is currently installing the new HBOOT (Green bar showing about 75% done).
mikaelft said:
Thanks. The phone is currently installing the new HBOOT (Green bar showing about 75% done).
Click to expand...
Click to collapse
yeah it's kind a bug you get stuck at 75%, just type in prompt command:
adb reboot bootloader
you should boot into bootloader and see the new hboot version.
McGiver93 said:
yeah it's kind a bug you get stuck at 75%, just type in prompt command:
adb reboot bootloader
you should boot into bootloader and see the new hboot version.
Click to expand...
Click to collapse
Thanks, currently installing 3.16 After this I S-On the phone.
What else should/could I install? Newer radio etc?
Will the phone be able to install OTA updates after this?
After installation:
Android 4.1.1
HTC Sense: 4+
Softwarenumber: 3.16.401.8
HTC SDK API: 4.63
HTC: HTCExtension_Sense45_2
From bootloader:
*** RELOCKED ***
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.11.50.05.28
OpenDSP-v31.1.0.45.0815
eMMC-boot
Dec 14 2012.17:10:57:6355
Should it really say "relocked" ?
mikaelft said:
Thanks, currently installing 3.16
What else should/could I install? Newer radio etc?
Will the phone be able to install OTA updates after this?
Is it safe to S-On now?
After installation:
Android 4.1.1
HTC Sense: 4+
Softwarenumber: 3.16.401.8
HTC SDK API: 4.63
HTC: HTCExtension_Sense45_2
Click to expand...
Click to collapse
you have alredy the new radio installing 3.16.401.8, I wouldn't s-on your phone because it's useless (unless your phone still have warranty)
McGiver93 said:
you have alredy the new radio installing 3.16.401.8, I wouldn't s-on your phone because it's useless (unless your phone still have warranty)
Click to expand...
Click to collapse
RADIO-1.11.50.05.28
Thanks!
Hey guys. I would really love help over here
I live OUTSIDE of US and using unlocked AT&T HTC One X.
1.73.502.1
File Timestamp: 04/07/12
Publically Seen: 05/06/12
Android: 4.0.3
hboot: 1.09.0000
Kernel: 3.0.8
adsp: 25.1.0.32.0405
radio: 0.16.32.09.01_3_10.79.32.08
I would love to flash my phone to CyanogenMod 10.1. But I cant. It looks like my RUU is outdated. Im unable to install any new RUU's because it says i have incorrect image. I tried this RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial.exe
I have superCID as far as I understand. No S-Off.
Is there any way to flash to CyanogenMod wihtout turning S-Off on or I am being completely retarded here?
Don't try running that RUU again while you're s-on. Bad idea while you have SuperCID. The best idea for you is to do s-off. Then you can RUU. Then you should be able to flash CM10.1
Sent from my Evita
timmaaa said:
Don't try running that RUU again while you're s-on. Bad idea while you have SuperCID. The best idea for you is to do s-off. Then you can RUU. Then you should be able to flash CM10.1
Sent from my Evita
Click to expand...
Click to collapse
thanks for reply!
i cannot s-off for some reason. on one point it should return "FAILED (remote: 92 supercid! Please flush image again immediately)" but for some reason returns remote: 99.
anyone who can help me additionaly via skype would be rewarded. im so tired and confused right now so anything would be appreciated.
There is a solution posted by Chongodroid in the s-off thread for the error 99 problem, I think it's on about page 17 if I remember correctly.
Sent from my Evita
timmaaa said:
There is a solution posted by Chongodroid in the s-off thread for the error 99 problem, I think it's on about page 17 if I remember correctly.
Sent from my Evita
Click to expand...
Click to collapse
IRC guy beaups helpd me. Big thanks to that guy.
New question. Should i update RUU from my 1.73 to newest one in order to flash Cyanomod ROM?
Yes, if you now have s-off, run the 3.18 RUU.
http://dl3.htc.com/application/RUU_..._10.130.32.34_release_signed_With_Partial.exe
Sent from my Evita
XDA Greetings friends, I have a HTC ONE X AT & T with the following specifications:
Unloket
Avoid PVT Ship S-off rl
CID-11111111
Hboot-1.14.0002
Radio-0.19as.32.09.11.2
openDPS-v29.1.0.45.0622
eMMC-boot.
June 11, 2012, 14:36:28
My question is this:
I can? Place a cooked ROM with android 4.2.2 and Sense 5?, Having HBOOT 1.14? eye now I'm on android 4.0.4 manufactures, I have the SuperCID, Unlocked bootloader, root the phone and installed the TWRP Recovery
Or did I have to apply a RUU (3.18.502.6) to be on HBOOT 2.14??? and so to upgrade to android 4.2.2???
If I apply the RUU'll have to repeat the process bara release the bootloader, root and install the Recovery?
Thanks mates!
excuse my bad English
You can go ahead and install a custom Sense 5 Android 4.2.2 with your current setup. You'll need to install the Beastmode kernel though or you'll suffer signal loss and reboots. The other option is to upgrade to the 2.15 firmware package.
Sent from my Evita
timmaaa said:
You can go ahead and install a custom Sense 5 Android 4.2.2 with your current setup. You'll need to install the Beastmode kernel though or you'll suffer signal loss and reboots. The other option is to upgrade to the 2.15 firmware package.
Sent from my Evita
Click to expand...
Click to collapse
ok I understand correctly, if it does not work for my rom Kernel 4.2.2 Beastmode more, as I get to the 2.15 firmware upgrade package?
Very Grateful for your previous answer : Bueno:
Install the ROM and the Beastmode kernel together and you'll be fine.
Sent from my Evita
Nehomar_C said:
ok I understand correctly, if it does not work for my rom Kernel 4.2.2 Beastmode more, as I get to the 2.15 firmware upgrade package?:
Click to expand...
Click to collapse
When you flash a ROM (with S-off) both the ROM and kernel are replaced, so it doesn't actually matter what ROM and kernel you are coming from.
Sense 5 custom ROMs will install fine on any hboot. But some folks will get signal drops and random reboots. Solution is to either flash Beastmode kernel or flash the 2.15 firmware.
I unlocked and rooted my Evita , i committed a mistake by not backing-up my stock sense rom, now i need to get back to the stock , and i couldn't find RUU for my phone,
things that i have : OTA update to 4.2.2 Sense 5 ; Backup for Old 4.1.1 Sense 4 Rom
now i have AOSP Paranoid android ,
bootloader details:
Evita PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.150000
RADIO-1.30a.32.45.18
OpenDSP-v33.1.0.45.1128
eMMC-boot
Aug 7 2013,16:28:08:-1
i have TWRP recovery v2.6.3.0
So what should i do?
and thanks in advance.
Run an Evita RUU, that'll take you back to stock.
http://androidruu.com/?developer=Evita
Sent from my Evita
39356364 28
timmaaa said:
Run an Evita RUU, that'll take you back to stock.
http://androidruu.com/?developer=Evita
Sent from my Evita
Click to expand...
Click to collapse
these RUUs will install the 4.1.1 Sense 4 stock right?
the question that i forgot to ask that will there be a problem if i run an old RUU although i've updated my phone to sense 5 before ,and all info in the bootloader changed?
It depends which RUU you run. You're s-off so you can run any Evita RUU, whether it's a forwards or backwards step. Just make sure you choose the right RUU (the 3.17/3.18 ones are Android 4.1 and Sense 4+) and you'll be fine.
Sent from my Evita
No there will be no problem since you have s-off. Nothing in your bootloader will change. The bootloader will remain unlocked. Your cid will remain supercid and you will still be s-off. You can run older or newer RUUs without consequence.
Sent from my One XL using xda app-developers app
Thanks Guys :good: