Be Carefull when using this perfect flash - Sony Xperia C

guys If your using this perfect flash
to install CWM Recovery be carefull you may end up like image below & have to send to service center. after using this tool SUS or Sony PC Companion won't Install your region firmware. I will be only be able to get it frm that region.
When you pull status you can see all check points reached that's it.
1. You will not be able to get through this screen.
2. you will be able to access only Settings through Status bar.
3. Sims don't work & nothing will.
5. Nav btns don't work back/home/recent opens no use.
4. It will boot without any problem.
tried different things to get reed of this & flashed using SUS & Sony PC Companion same result.
My phone XC is in service center

someshch said:
This is the result of unplugging the phone at 97%, so guys never unplug at 97% although it will take a lot of time after 97% and download the ftf from here only :
http://yadi.sk/d/n7ny1XyoLWTKQ
If any problem please reply!
Click to expand...
Click to collapse
I was the 1 who told to leave to complete 100%
this was not the problem of that.
I got the problem with the frim ware so tried to reflash using it so ended up with that. So I tried SUS that also same. it will install firmware frm the same region.
If this Hong Kong region its bad. any English will be good
which region firmware is this link you posted

WMshua can't flash CWM. mobileuncle MTK tool 2.9.9 can flash CWM
from my opinion ,u can try this:
1. Mandatory shutdown the phone . look at this: http://forum.xda-developers.com/showthread.php?t=2698685
2.boot into recovery mode using hard button (so luckly to see ) look at this: http://forum.xda-developers.com/showthread.php?t=2701341
3.
Extract the folder inside .rar file (better do this process on computer instead of mobile)
-.Now in move this folder to your sdcard/clockworkrecovery/backup/<here>
-.Boot into recovery (turn off your xperia properly, now press "power" + "volume down" untill u boot into revcery)
-.do a Nandroid backup(recommanded)
-.Go to Wipe Section and Wipe Your data + system
-.go to Backup and restore section and restore "Xperia-Z-ized_C2305_v0.94" backup which you downloaded.
-.Let it restore
-.Reboot and Enjoy
- Backup Xperia-Z-ized_C2305_v0.94 http://pan.baidu.com/s/1nt6YVbj or B2.13 http://pan.baidu.com/s/1jGqQdxk

Related

[Q] Sony Xperia Tipo, flashing. please help.

Hello friends,
Please help me. I rooted my phone Tipo (Android updated to latest), Installed the startup manager. Permissions denied app. I denied permissions to a few games and apps. and then locked, then reboot through it. Now my phone starts for few seconds. When I unlock the screen and try to touch something, it hangs and shuts down immediately and restarts after a minute. This restarting is Cycling continuously.
I am removed the battery to stop the restart cycles.
I think its time to flash the phone manually. Its only phone I have right now.
Can you help me? Please show me a post, or link that will guide me with manual flashing.
wrong section
cipjanin said:
wrong section
Click to expand...
Click to collapse
Where should I post it then?
Ketansa said:
Hello friends,
Please help me. I rooted my phone Tipo (Android updated to latest), Installed the startup manager. Permissions denied app. I denied permissions to a few games and apps. and then locked, then reboot through it. Now my phone starts for few seconds. When I unlock the screen and try to touch something, it hangs and shuts down immediately and restarts after a minute. This restarting is Cycling continuously.
I am removed the battery to stop the restart cycles.
I think its time to flash the phone manually. Its only phone I have right now.
Can you help me? Please show me a post, or link that will guide me with manual flashing.
Click to expand...
Click to collapse
first thing you need is flash tool .download from here http://androxyde.github.com/ download and install it
then you need a stock firmware download it from http://forum.xda-developers.com/showthread.php?t=2001567
copy it to the flashtool/firmware (where you install flashtool)
install the drivers from the drivers folder inside flashtool
you are ready to flash the firmware(make sure there is no other file in firmware folder exept you mobile's firmware)
1. start the flashtool
2. click on lighting bolt button
3. choose flashmode
4. make sure wipe data and wipe cache are checked
5.click ok
6. after flashtool prepairs files for flashing ( it will told you to unplug and press back button and plug it in BUT YOU HAVE TO UNPLUG YOUR MOBILE,, SWITCH IT OFF(I KNOW ITS ALREADY SWITCHED OFF) PRESS AND HOLD VOLUME DOWN KEY WHILE PLUGING IN YOUR MOBILE
when flash process starts release the volume down key
7. wait for flashing process complete .. .(it will stuck at 94% for just few seconds don't worry )
after flashing process complete switch on your mobile.....good luck
after flashing if you want to root it ..follow the guide here http://forum.xda-developers.com/forumdisplay.php?f=1978
check the attchments..for screens
Hey Moderator,
Please remove or lock this post or something, just in case if it is not appropriate here.
The phone was a Brick who was constantly saying nothing other than "Look I am not a Brick".
I solved the problem. The Sony PC companion did not do anything. Using the old Update Service I reinstalled the phone software. Now it is completely renewed. Touch issues also seem to be gone. ))
gagu.436425 said:
first thing you need is flash tool .download from here http://androxyde.github.com/ download and install it
then you need a stock firmware download it from http://forum.xda-developers.com/showthread.php?t=2001567
copy it to the flashtool/firmware (where you install flashtool)
install the drivers from the drivers folder inside flashtool
you are ready to flash the firmware(make sure there is no other file in firmware folder exept you mobile's firmware)
1. start the flashtool
2. click on lighting bolt button
3. choose flashmode
4. make sure wipe data and wipe cache are checked
5.click ok
6. after flashtool prepairs files for flashing ( it will told you to unplug and press back button and plug it in BUT YOU HAVE TO UNPLUG YOUR MOBILE,, SWITCH IT OFF(I KNOW ITS ALREADY SWITCHED OFF) PRESS AND HOLD VOLUME DOWN KEY WHILE PLUGING IN YOUR MOBILE
when flash process starts release the volume down key
7. wait for flashing process complete .. .(it will stuck at 94% for just few seconds don't worry )
after flashing process complete switch on your mobile.....good luck
after flashing if you want to root it ..follow the guide here http://forum.xda-developers.com/forumdisplay.php?f=1978
check the attchments..for screens
Click to expand...
Click to collapse
Ohhh, OMG. wow! . Hey, I didn't notice your reply. Thank you so much. Although the problem got solved with the Update Service, I will still use your instructions soon because I will be installing the custom ROMS.
Thank you very much again.
Good wishes for your new year, to be much better than the previous one.
See you.
Ketansa said:
Ohhh, OMG. wow! . Hey, I didn't notice your reply. Thank you so much. Although the problem got solved with the Update Service, I will still use your instructions soon because I will be installing the custom ROMS.
Thank you very much again.
Good wishes for your new year, to be much better than the previous one.
See you.
Click to expand...
Click to collapse
happy new year to you too
Help if u can,..
Can anyone plz provide me the circuit diagram or schematic diagram or service manual for xeperia tipo,..?? :silly:

[Q] Boot Failure after installing Chainfire 3D

Question:
How to turn back my phone to normal after installing Chainfire 3D v3.3? Or how to uninstall the chainfire 3d driver?
What Happened:
To improve gaming experience, I happen to tumble with Chainfire 3D. I read that this is not compatible with JB. But the notes in the page where I downloaded the Chainfire 3D apk says that it requires ANDROID - 2.1+, so I concluded that JB 4.1 passed the requirement. After installing Chainfire 3D, I installed its drivers, phone automatically reboots, then voila! I am stuck with the SONY logo.
I tried to do some research on how to undo the Chainfire3d installation and i found this:
"To uninstall it I installed ADB, I went to CWM and from console of ADB I executed this: adb shell /system/lib/cf3d_uninstall.sh"
And now my 2nd problem appeared. I CAN'T ENTER THE CWM! T_T
I am wondering why. I remembered entering it when I rooted my phone. (Turn-On, wait for blue led, then press Vol+ and Vol- simultaneously)
But now, it doesn't work anymore. I tried reading some posts here about entering CWM, tried all of them, still no luck.
Now, I am stuck with the SONY logo. What shall I do? T_T
Technical Details:
Rooted Phone: Yes
Bootloader Unlocked: Yes
Phone Model: Sony Xperia J ST26i
Android: Jellybean 4.1
Additional Details:
I rooted my phone using some tutorial that includes a fastboot mode. I read somewhere that using fastboot mode has only temporary recovery mode. Thus, it will be impossible for me to enter CWM since it is not existing anymore in my phone?
A shed of light will be greatly appreciated. A solution would be exemplary. Thanks.
Jay-Arr
Did you read/search the CF thread for similar cases? http://forum.xda-developers.com/showthread.php?t=1087427
It's better to ask this in the Xperia J forum, i've asked for this thread to be moved, hopefully it'll be done fairly quickly.
I dunno much about Xperia devices.
Yeah, I already read that. Unfortunately, after I installed the Chainfire 3D. This problem of mine actually leads me here to XDA.
And there's no information there either on how to undo it if someone happens to installed it on Android 4.1 and above.
I actually read several threads here so far regarding the chainfire 3D limitiations. But none has any solution to my problem.
I wanna try the solution i found, but I couldn't access my CWM. I also read several posts about entering CWM here. But just I said, all of them didn't worked for me.
The worse case could be, I dont have a CWM yet. Given that that is true, and given that I am stuck with the SONY logo, can I still install a CWM on my phone given these circumstances? I also read that there's no CWM yet for Xperia J 4.1 users yet. T_T
Yes that is what i suspected, that you dont have CWM but rather the stock recovery. But i dunno the flashing procedure of xperia well enough.
Maybe enter fastboot and flash a different rom? cm10?
Hi,
Can you check this link for me?
rootlord.blogspot.com/2013/04/root-sony-xperia-j-jellybean-112a021.html?showComment=1371884082709#c8724425202135341446
That's how I rooted my phone. As you can see, I accessed CWM there.
For reference, here's the process:
1. Connect Your Xperia J To Your PC
2. Download This Root File- Root_xperi_signed.zip
3. Copy "root_xperia_signed.zip" file to sd card (ext...)
4. Disconect Your Xperia J and switch it off
5. Launch Xperia flashtool
6. Hold volume + button and connect phone with usb cable to pc, you'll saw blue led light (Now You have entered to Fastboot mode)
7. Download this: Boot.img
8. Copy "boot.img" file to flashtool/firmwares
9. Click on lightening icon in flashtool and click fastboot mode
10. Click "Select kernel to Flash" on right side in flashtool
11. Browse and choose "boot.img" , flashtool will automaticly flash this file
12. Turn off phone after flashing
13. Turn on phone,when you'll see blue light at bottom phone not the small blue led up, start pressing all volume buttons + and - .
14. If you succed,you'll enter to CWM recovery,click "install zip from ext card" and find "root_xperia_signed.zip" file and flash it.
15. After flashing,click reboot system,but don't wait for reboot,just take battery out for few second and put it back
16. Now download: kernal.sin and copy "kernel.sin" file to flashtool/firmwares
17. Follow step 9 and 10.
18. Disconnect phone and Switch It On.
I am thinking, for me to have an access to CWM, maybe i can try to re-do Steps 5 to 13?
What I dont know is that, since I am re-flashing the same image file (back when i rooted my phone), can it result into something unexpected? such as bricking my phone? What's your opinion on this?
Thanks.
Yes, worth a try.
No, i don't think anything odd will happen from flashing that boot.img.
Failed.
I went to all the trouble this guy made, forum.xda-developers.com/showthread.php?t=1124668&page=2
I still ended up in SONY logo in the end. Nothing changed.
By the way, how can I turn ON USB Debugging from PC? From the flashtool it says that it's off, where in fact it's always turned ON before this catastrophe happened to me.
eureckou said:
By the way, how can I turn ON USB Debugging from PC? From the flashtool it says that it's off, where in fact it's always turned ON before this catastrophe happened to me.
Click to expand...
Click to collapse
Not possible http://forum.xda-developers.com/showthread.php?p=27745780
But you should be able to flash roms and boot images from fastboot successfully, wonder what's wrong.
Im down to my last resort i guess. Where can I download ROMS/IMAGES?
Here in the Dev and Original Dev forums http://forum.xda-developers.com/forumdisplay.php?f=1976 of xperia j, read carefully though.
same thing happened to me. Here's what fixed it
Yup same thing happened to me with my galaxy s4. Here's what you gotta do. Install SAMSUNG kie. Going to the tools and there will be a option to restore your phone. Click on it and it will have you enter your model number and serial number and this could be found underneath the battery. After doing that will give you a small directions to follow. Then it will download the latest firmware for your device and bring you to the installation screen. Here have you remove your battery and put it back together and boot into download mode. After this it will have a few boxes for you to check and you'll be able to start it. You'll see loading bar come up it will restore your phone to factory settings. Once you get it all set up again you could use kie to make a backup of your phone. Then you'll be all set.
chainfire not work for jellybean
I gave up on finding a solution for this one. I just flashed a stock ROM using flashtool to my Xperia J. Re-installed everything.
One thing I learned though, read before you click. ^_^
For anyone trying to find xperia official firmwares, here's the link:
http://www.qosmodro.me/2013/01/xperia-2011-official-stock-firmware.html#.UcZx2pxgGJB
Thanks guys.
INSTALLED CHAINFIRE 3d got Stocked on SONY Logo [Xperia J]
I've had the same situation too, here's the fix for it
if you UNLOCKED your BOOTLOADER
RELOCK it, I used Flashtools for UNLOCK and RELOCK
Then install SONY UPDATE SERVICE
REINSTALL YOUR FIRMWARE
that will do the trick
I got the same problem with my xperia j.. please Help
eureckou said:
Hi,
Can you check this link for me?
rootlord.blogspot.com/2013/04/root-sony-xperia-j-jellybean-112a021.html?showComment=1371884082709#c8724425202135341446
That's how I rooted my phone. As you can see, I accessed CWM there.
For reference, here's the process:
1. Connect Your Xperia J To Your PC
2. Download This Root File- Root_xperi_signed.zip
3. Copy "root_xperia_signed.zip" file to sd card (ext...)
4. Disconect Your Xperia J and switch it off
5. Launch Xperia flashtool
6. Hold volume + button and connect phone with usb cable to pc, you'll saw blue led light (Now You have entered to Fastboot mode)
7. Download this: Boot.img
8. Copy "boot.img" file to flashtool/firmwares
9. Click on lightening icon in flashtool and click fastboot mode
10. Click "Select kernel to Flash" on right side in flashtool
11. Browse and choose "boot.img" , flashtool will automaticly flash this file
12. Turn off phone after flashing
13. Turn on phone,when you'll see blue light at bottom phone not the small blue led up, start pressing all volume buttons + and - .
14. If you succed,you'll enter to CWM recovery,click "install zip from ext card" and find "root_xperia_signed.zip" file and flash it.
15. After flashing,click reboot system,but don't wait for reboot,just take battery out for few second and put it back
16. Now download: kernal.sin and copy "kernel.sin" file to flashtool/firmwares
17. Follow step 9 and 10.
18. Disconnect phone and Switch It On.
I am thinking, for me to have an access to CWM, maybe i can try to re-do Steps 5 to 13?
What I dont know is that, since I am re-flashing the same image file (back when i rooted my phone), can it result into something unexpected? such as bricking my phone? What's your opinion on this?
Thanks.
Click to expand...
Click to collapse
Please see the attachment.. Help Me
i even cant anter in cwm what can i do?

[Q] Galaxy SL i9003 Stuck in boot screen..

My big bro tried to root Galaxy SL i9003, i don't know which rooting application/software he has used, but when handset restarted after rooting completion it's stuck at screen showing "SAMSUNG Galaxy SL i9003" boot screen...
Now what i do, some of my friend told me that I have to flash mobile with its original ROM with proper version..
Where should i get original ROM of my mobile and how can i know firmware version because i am not able to boot my handset to *#1234#...
PLz HELP!!!!!
amoghs said:
My big bro tried to root Galaxy SL i9003, i don't know which rooting application/software he has used, but when handset restarted after rooting completion it's stuck at screen showing "SAMSUNG Galaxy SL i9003" boot screen...
Now what i do, some of my friend told me that I have to flash mobile with its original ROM with proper version..
Where should i get original ROM of my mobile and how can i know firmware version because i am not able to boot my handset to *#1234#...
PLz HELP!!!!!
Click to expand...
Click to collapse
just do a clean flash of gingerbread DDLF2 2.3.6 using ODIN. your problem will get solved. and always read a plenty of articles before doing such tasks..
File Selection in Odin
maxs8007 said:
just do a clean flash of gingerbread DDLF2 2.3.6 using ODIN. your problem will get solved. and always read a plenty of articles before doing such tasks..
Click to expand...
Click to collapse
Hey maxs, Thank you For your reply...as you said i have downloaded File I9003DDLF2_I9003ODDLF2_INU.zip from http://forum.xda-developers.com/showthread.php?t=1004647 and extracted to some location on machine but this zip contains only two files first one is I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5 and another on is SS_DL.dll.
I m using Odin v3.07 in that where i supposed to select "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5" this file at bootloader/PDA/Phone/CSC..
It will be very helpful if give steps of flashing.
Still Phone is stucked at Boot Screen
amoghs said:
I m using Odin v3.07 in that where i supposed to select "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5" this file at bootloader/PDA/Phone/CSC..
Click to expand...
Click to collapse
I selected "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5" file in PDA and only Auto Reboot and F.Reset Time is checked and started downloading all goes OK and Pass is showed.
But Still mobile is stucked in boot screen Plz HELP!!!
Greetings;
Have you solved your problem?
If not, tell me what Android version are you running on your device?
i.e: Gingerbread; Ice Cream Sandwich; Jelly Bean or KitKat.
Assuming you are running stock firmware i believe that either your brother flashed a wrong CF-Root for your device or used an application that could not root your device properly.
Either ways don't worry since your device can enter both Download and Recovery modes, it means that you can debug it.
[Rooting]
The best way to root this device is by flashing CF-Root file.
By flashing this file (CF-Root) you will be installing:
- ClockWork Mod Recovery
- Script that will root (automatically) your device.
- ext4 application. (do some research to know what ext4 is and how it os often used)
Small note: Since you will be rooted you will be able to overclock or underclock your device as well increase your device performance and battery duration.
Just PM me or do some research if you need some info regarding these configuration and settings.
[Fixing your issue]
Download Universal CF-Root here:
http://forum.xda-developers.com/showthread.php?t=1351056
Read the instructions before proceeding.
Now boot your device under Download Mode.
To do so:
Unplug USB Cable, Power Off your device and press the following key combination:
Vol.Down + Menu/Home Button + Power Button.
Release when the device enters download mode.
Now open Odin.
Under [PDA] load the CF Root File you've downloaded.
(Do NOT change any options inside odin if you dont know what they are for. Or you may get your device useless).
Put down your device so movement is done into the USB Cable (just to prevent bad flashing when you have low quality USB Cable).
Press Start and let the operation to complete.
Odin will display a message saying: "Pass" highlighted with Green.
Check if your device restarts (it may not restart yet)
If your device boots properly backup your data and follow the next step. If it doesnt boot properly follow to the next step.
Voot your device into recovery mode.
To do so: Power off your device and make sure it is not charging or connected to USB cable.
Then press and hold the following key combination:
Vol. Up + Menu/Home Button + Power Button.
Release after the Boot Logo is shown and you will enter recovery mode.
Now you will perform a Factory Reset.
Inside CWM select by the following order:
- Wipe Dalvik Cache
- Clean Cache
- Factory Reset
Note that Dalvik Cache is not shown at the main menu.
I dont remember the location exactly but if im not mistaken you can find it under "Advanced".
After you perform these 3 options the device shall reboot properly.
(it may take a little bit longer this time. Just be patient).
Since i dont know what was done to your device, there is still a chance that your device wont boot.
Either ways please let me / us (at XDA) know if it worked for you.
It is important (at least for me as a quality standard) that you are able to repair your device.
Best Regards
Please press thank button if this helped you. Since this will keep me motivated to continue helping.
Sent from my GT-I9003 using XDA Free mobile app
Any further help
rgxHost said:
Greetings;
Have you solved your problem?
If not, tell me what Android version are you running on your device?
i.e: Gingerbread; Ice Cream Sandwich; Jelly Bean or KitKat.
Assuming you are running stock firmware i believe that either your brother flashed a wrong CF-Root for your device or used an application that could not root your device properly.
Either ways don't worry since your device can enter both Download and Recovery modes, it means that you can debug it.
[Rooting]
The best way to root this device is by flashing CF-Root file.
By flashing this file (CF-Root) you will be installing:
- ClockWork Mod Recovery
- Script that will root (automatically) your device.
- ext4 application. (do some research to know what ext4 is and how it os often used)
Small note: Since you will be rooted you will be able to overclock or underclock your device as well increase your device performance and battery duration.
Just PM me or do some research if you need some info regarding these configuration and settings.
[Fixing your issue]
Download Universal CF-Root here:
http://forum.xda-developers.com/showthread.php?t=1351056
Read the instructions before proceeding.
Now boot your device under Download Mode.
To do so:
Unplug USB Cable, Power Off your device and press the following key combination:
Vol.Down + Menu/Home Button + Power Button.
Release when the device enters download mode.
Now open Odin.
Under [PDA] load the CF Root File you've downloaded.
(Do NOT change any options inside odin if you dont know what they are for. Or you may get your device useless).
Put down your device so movement is done into the USB Cable (just to prevent bad flashing when you have low quality USB Cable).
Press Start and let the operation to complete.
Odin will display a message saying: "Pass" highlighted with Green.
Check if your device restarts (it may not restart yet)
If your device boots properly backup your data and follow the next step. If it doesnt boot properly follow to the next step.
Voot your device into recovery mode.
To do so: Power off your device and make sure it is not charging or connected to USB cable.
Then press and hold the following key combination:
Vol. Up + Menu/Home Button + Power Button.
Release after the Boot Logo is shown and you will enter recovery mode.
Now you will perform a Factory Reset.
Inside CWM select by the following order:
- Wipe Dalvik Cache
- Clean Cache
- Factory Reset
Note that Dalvik Cache is not shown at the main menu.
I dont remember the location exactly but if im not mistaken you can find it under "Advanced".
After you perform these 3 options the device shall reboot properly.
(it may take a little bit longer this time. Just be patient).
Since i dont know what was done to your device, there is still a chance that your device wont boot.
Either ways please let me / us (at XDA) know if it worked for you.
It is important (at least for me as a quality standard) that you are able to repair your device.
Best Regards
Please press thank button if this helped you. Since this will keep me motivated to continue helping.
Sent from my GT-I9003 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for your reply. Frankly speaking I don't remember which Android version I was using may be Gingerbread (Is this important)
I downloaded "bagaria-09.GT-I9003_PDA.tar" from the link given by you and following procedure that you have mentioned. After odin says "Pass" I switched off my mobile and started in Recover mode it took around 15-20 mins to show recovery option. after this performed
- Wipe Dalvik Cache
- Clean Cache
- Factory Reset
and then Reboot. As you said phone is stucked on boot image for more than 15 mins then an loop on "SAMSUNG" logo after more 15 mins phone is showing "kernel panic upload mode"
Can you help me further?
amoghs said:
Thanks for your reply. Frankly speaking I don't remember which Android version I was using may be Gingerbread (Is this important)
I downloaded "bagaria-09.GT-I9003_PDA.tar" from the link given by you and following procedure that you have mentioned. After odin says "Pass" I switched off my mobile and started in Recover mode it took around 15-20 mins to show recovery option. after this performed
- Wipe Dalvik Cache
- Clean Cache
- Factory Reset
and then Reboot. As you said phone is stucked on boot image for more than 15 mins then an loop on "SAMSUNG" logo after more 15 mins phone is showing "kernel panic upload mode"
Can you help me further?
Click to expand...
Click to collapse
Hello amoghs;
Again sorry for answering after so long; I'm not so often at XDA Lately.
Yes.
1st: Try Remove the Battery, then Put it Back and Try Again.
If this doens't Work:
1) Turn your Device Off and Press:
Vol. UP + Home Button + Power (To Enter CWM / Your Recovery Mode)
2) Select: "Factory Reset"
Let me know how it worked for you.
Note:
- After Flashing a ROM it is Normal that your Device Takes a little Longer to Boot on the "1st" time.
- Phone Stuck on Boot Logo and Looping: Boot Issues (Either Requires to Remove and Place Back the Battery; or Re-Flash the ROM or Stock Rom in a Difficult Stage).
Notes:
- After a Flash Perform a Factory Reset (To Clean Up Old Stuff).
- If you Experience: "Kernel Panic":
a) Remove Battery and Place it Back - (Works on Most Cases)
b) Flash your ROM again and DO NOT Instal Custom Kernel (May be Wrong Kernel or Bad/Incompatible Kernel Programming)
c) Phone Restarts by Himself: Reflash ROM, Try MinFreeManager or Similar APK (Application). Try "Optimal" Settings. (I dont recall the Presets names - But you can Safely test them - Even if device gets stuck. You can always revert to previous state).
d) Any Hard-to-Solve Issues: Just do a "Clean Flash" of STOCK Gingerbread (Check Sammobile Website - Invalid Download Links Just send email to Support Requesting the File)
or Flash "DDLF2 2.3.6 (Also Gingerbread). But always try Stock 1st to remove most issues, and only then Flash your Desired ROM.
Also if you haven't fixed the Boot Issue already: Do note that you can recover your device Boot.
NOT Dead Yet!
Please do let me know if you solved your Boot problem.
Best Regards;
Richard

[HELP!][Lava Iris 349] After Flashing RECOVERY.PAC, UNIT dead...

Hi!
I need help please.
I own a Lava Iris 349 (Cloudphone Ice350e here in the Philippines). I have been SUCCESSFULY flashing of stock roms and custom roms, rooting and installing recovery thru MOBILEUNCLE for this unit several times already then this happened:
Last night, I went to flash the stock ROM V7 through ReasearchDownload. It went well and rebooted well... Next is I rooted the unit using iRoot and it goes normally, rebooted well. Next is I decided to shift from Mobileuncle in installing recovery and instead wanted to try flashing the RECOVERY.PAC through Research download for the FIRST TIME. I proceeded with the process and flashed the said recovery just like any ROM.PAC without realizing that there has to be some unchecking to be done in the settings if you are flashing a RECOVERY file. (Flashing a ROM file doesn't require any modifications in the settings)...
The flashing countinued and it was successful... But NOT really... This time, my unit WON'T CHARGE, WON'T TURN ON, CAN'T BE DETECTED BY ReasearchDownload AND WON'T REACT to anything I do.... It is DEAD... I mean it is practically DEAD...
Someone told me that since I flashed a recovery.PAC just like it's a rom.PAC, it only means that after wiping everything, the system, the data, the cache, the recovery.PAC doesn't contain anything to replace these files (unlike a rom.pac) and the effect was the unit simply became BLANK with no programs to interpret any physical manipulation to the phone. It won't and can't interpret anything like CHARGING, PRESSING THE POWER BUTTON and CONNECTING TO A PC... It simply became a piece of USELESS HARDWARE... Because no software has been intsalled or whatsoever...
Click to expand...
Click to collapse
Now, I am appealing to people here if there is still a way or technique to fuly revive my unit...
Help will always be appeciated...
Solved by myself...
------------ I followed this tut.... ------------------------ TO fully flash your phone.
1. Open Researchdownload
2. Load packet and look for file(first button)
3. Remove check in the following selection
✓EraseRuntimeNV
✓PHASE_CHECK
✓EraseCache
✓EraseData
✓EraseMisc
4. Click in BACKUP page, and UNCHECK ALL and press OK
5. And lastly press the Play button to continue flashing. -------------------
http://firmwares2you.blogspot.com/2014/10/cloudfone-ice-350e-stock-rom-to-unbrick.htmlCredits to this BLOG:
pROAddicts said:
Solved by myself...
------------ I followed this tut.... ------------------------ TO fully flash your phone.
1. Open Researchdownload
2. Load packet and look for file(first button)
3. Remove check in the following selection
✓EraseRuntimeNV
✓PHASE_CHECK
✓EraseCache
✓EraseData
✓EraseMisc
4. Click in BACKUP page, and UNCHECK ALL and press OK
5. And lastly press the Play button to continue flashing. -------------------
http://firmwares2you.blogspot.com/2014/10/cloudfone-ice-350e-stock-rom-to-unbrick.htmlCredits to this BLOG:
Click to expand...
Click to collapse
Research download cant detect phone, are there anything to press while conneceting with usb???????????????
Please anyone tell me the flashing procedure in detailss
Sent from my MI 4W using XDA-Developers mobile app

HELP NEEDED. stuck in bootloop after editing build.prop file. (gt-s7562)

This is my first ever use of any forum. So plz sry if i am posting this thread in the wrong place/discussion!!
I had a samsung galaxy s duos(gt-s7562). i rooted it about 2-3 years back. a few days back i tried to edit my build.prop file using es file explorer. It did work but after my work was done i made the mistake of copy-pasting the backed up file.(i had made a general copy-type backup of the file.) When i tried to reboot my phone it got stuck at the samsung screen.(maybe a bootloop.)
I can go to the recovery mode by pressing volume, home and power button. But it is the android system recovery. No cwm.
How can i get it back to life??!!
I have another s duos phone which i am currently using to write this thread. I thought of rooting this phone and then using its nandroid backup to restore my first phone. But as told, there is no custom recovery on that. And usb debugging is also off.
Can i use odin to install cwm recovery on my phone withou usb dedebugging. And is there any other easier method to recover my soft bricked phone.
Please help.
shubham aadeez said:
This is my first ever use of any forum. So plz sry if i am posting this thread in the wrong place/discussion!!
I had a samsung galaxy s duos(gt-s7562). i rooted it about 2-3 years back. a few days back i tried to edit my build.prop file using es file explorer. It did work but after my work was done i made the mistake of copy-pasting the backed up file.(i had made a general copy-type backup of the file.) When i tried to reboot my phone it got stuck at the samsung screen.(maybe a bootloop.)
I can go to the recovery mode by pressing volume, home and power button. But it is the android system recovery. No cwm.
How can i get it back to life??!!
I have another s duos phone which i am currently using to write this thread. I thought of rooting this phone and then using its nandroid backup to restore my first phone. But as told, there is no custom recovery on that. And usb debugging is also off.
Can i use odin to install cwm recovery on my phone withou usb dedebugging. And is there any other easier method to recover my soft bricked phone.
Please help.
Click to expand...
Click to collapse
Follow the steps i tell u and u might get ur phone back
Requirements
1.Windows PC
2.Samsung USB Drivers
3.Odin for Windows
4. Samsung GT s 7526 Stock Rom
See if u can find STOCK ROM for ur country, if not then just download a closer one or just any
LETS GET STARTED
1. Install Samsung USB Drivers on PC smoothly
2. Extract Odin anywhere u wish
3. Boot phone to DOWNLOAD MODE {Hold Volume Up+Home+Power}
4. When warning screen pops up press Volume Up to continue
5. Open Odin on PC and connect Phone to PC via a DATA CABLE
6. U will see a message "ADDED"
7. Select AP or PDA, whichever is there and browse the STOCK ROM
8. Check the "Auto Restart'' and "F. Reset Time"
9.....................CLICK START............................
And after a while u will see a Green PASS/RESET message and ur phone will reboot
THATS ALL, U GOT UR PHONE BACK.......................

Categories

Resources