Database Info

LG Optimus 3D p920 stuck in loading

hello
(I) have and LG 3D stuck in loading
when i power on the phone, it shows an android package and a progress bar
and after few seconds (3-7) the the screen shows:
formatting data
formatting cache
then, the phone shuts down, this happens with both normal boot or pressing vol+ and the power-on button
I don't know how the problem been occurred, but i think it is a bad recovery file or something like this that my friend tried to flash onto the phone
SO, i installed the phone driver (from LGInstaller)
then, i tried making a restore from 'LGMobile update' (it downloaded a big file to flash, and say it's ok -that the phone is updated-) but no result
LG PC Suite IV is not recognizing the phone
when i try flashing any recovery, the commands are not recognizing the phone
because it keeps just few seconds before powering off (i also tried to flash in the time but nothing good)
When tried using flashboot, it doesn't also know the phone
(used fastboot devices)
i searched lot in forums but can't find a solution
so i'm stuck here,
Here is a picture showing the problem
multisiteupload.com/files/0FOIEGTI /video.rar
Edit:
i used 'LGFlashTool' to flash a .bin file, but in about 80% it says: restarting the phone, and nothing happens, then i get failed in 100%
with 'B_SmartFlashTool_Extern' the flashing goes good, but nothing changed

ARDV said:
hello
My friend have and LG 3D stucking in loading
when i power on the phone, it shows an android package and a progress bar
and after few seconds (3-7) the phone shuts sown, this happens with both normal boot or pressing vol+ and the power on button
I don't know how the problem been occurred, but i think it is a bad recovery file or something like this that my friend tried to flash onto the phone
SO, i installed the phone driver (from LGInstaller)
then, i tried making a restore from 'LGMobile update' (it downloaded a big file to flash, and say it's ok -that the phone is updated-) but no result
LG PC Suite IV is not recognizing the phone
when i try flashing any recovery, the commands are not recognizing the phone
because it keeps just few seconds before powering off (i also tried to flash in the time but nothing good)
When tried using flashboot, it doesn't also know the phone
(used fastboot devices)
i searched lot in forums but can't find a solution
so i'm stuck here,
here is a picture of the folder of programs i used and did not work, and a video showing the problem
multisiteupload.com/files/0FOIEGTI /video.rar
help me please
Click to expand...
Click to collapse
You try here
forum.xda-developers.com/showpost.php?p=18082599&postcount=1

littlega said:
You try here
forum.xda-developers.com/showpost.php?p=18082599&postcount=1
Click to expand...
Click to collapse
already tried it, the problem is i can't make step 2, which is enabling debug
and the PC is not recognizing the phone
when i open that programs, i it says that no device is connected
i will give it another try
Edit: i found a new thread that i think it may help
http://forum.xda-developers.com/showpost.php?p=17177547&postcount=2
but the problem is that fileserve is no longer a file sharing website, so i can't get the bin files
i'm goggling it but nothing yet, hope to find a bin, cuz i didn't try that way in the thread

ARDV said:
already tried it, the problem is i can't make step 2, which is enabling debug
and the PC is not recognizing the phone
when i open that programs, i it says that no device is connected
i will give it another try
Edit: i found a new thread that i think it may help
http://forum.xda-developers.com/showpost.php?p=17177547&postcount=2
but the problem is that fileserve is no longer a file sharing website, so i can't get the bin files
i'm goggling it but nothing yet, hope to find a bin, cuz i didn't try that way in the thread
Click to expand...
Click to collapse
in step 2
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Try to reinstall drives.Remove battery, plug phone to computer, press vol+ button and insert battery.

1682 toutesp
littlega said:
in step 2
Plug phone in dowload mode (power off phone then vol up + power,if you see lg logo release buttons)
Try to reinstall drives.Remove battery, plug phone to computer, press vol+ button and insert battery.
Click to expand...
Click to collapse
sorry, i remembered that i have already made this before
i mentioned that in the thread, i waited the program 1 hour downloading the new flashing files, and after thats it says that all is ok and i can power on the phone
but there is no result even after that

ARDV said:
sorry, i remembered that i have already made this before
i mentioned that in the thread, i waited the program 1 hour downloading the new flashing files, and after thats it says that all is ok and i can power on the phone
but there is no result even after that
Click to expand...
Click to collapse
I can not post pictures.
you try this before http://forum.xda-developers.com/showthread.php?t=1473781
then http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
you can use KDZ file don't need waiting to download and you can turn on the phone

littlega said:
I can not post pictures.
you try this before http://forum.xda-developers.com/showthread.php?t=1473781
then http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
you can use KDZ file don't need waiting to download and you can turn on the phone
Click to expand...
Click to collapse
already tried that methoed, but no result after finishing update

littlega said:
I can not post pictures.
you try this before http://forum.xda-developers.com/showthread.php?t=1473781
then http://forum.xda-developers.com/showpost.php?p=18082599&postcount=1
you can use KDZ file don't need waiting to download and you can turn on the phone
Click to expand...
Click to collapse
that sounds different
but i always get the no connection problem
stooorage.com/show/1108/5893368_06-04-2012-9-27-53.png

ARDV said:
already tried that methoed, but no result after finishing update
Click to expand...
Click to collapse
Have you tried other KDZ files yet ?
stooorage.com/show/1108/5893368_06-04-2012-9-27-53.png File not found.

littlega said:
Have you tried other KDZ files yet ?
stooorage.com/show/1108/5893368_06-04-2012-9-27-53.png File not found.
Click to expand...
Click to collapse
add www to the link
www .stooorage.com/show/1108/5893368_06-04-2012-9-27-53.png (space)
_____
i jsut used 1 kdz file, but it doesn't even use it
and when i use the http program, it keeps teling me that the internet connection have a problem and doesn't move to the flashing procedure, i followed the tuto step by step
______
Edit: i believe that a change happens
it tells me now when i connect the phone via usb that the OMAP 4430 friver is not installed
and the Win7 can't find it, i just have 2 other OMAP-driver install files
but not for 4430 version, i'm searching for this one but nothing yet
____________
Edit: in another thread i found that someone telling that the 4430 driver installation is a little hard with WIN7
because the friver just shown in the device manager in 1 sec, and it diappear
and it's really the case, i catched it and made the method of choosing the files of the driver like mentioned
but it still telling me that it is not installed
here is a picture
www .stooorage.com/show/1108/5893444_06-04-2012-10-11-25.png (space)
in the right, there is the window that i choosed the fricer files from
on the left, the driver disappeared, and the other device windows telling me that the driver is not installed
help please

download driver here
mediafire.com/?ouxtb21xrj56x6j

littlega said:
download driver here
mediafire.com/?ouxtb21xrj56x6j
Click to expand...
Click to collapse
thanks for the link
for:
LGUnitedMobileDriver_S4981CAN35AP22_ML_WHQL_Ver_3.5
i have already the 3.6 driver
i have installed msxml
and it ask to update OMAPFlashInstaller and i accepted
now i'm trying another time with LG support tools - i'm making an online restore (that i have made before and not worked)
the updater finished downloading the new version (about 1 hr) and now it stucks on the update step
____________
Edit: that http program worked now, and the update process worked fine
but it's the same problem, nothing has changed (in the video i posted)

ARDV said:
thanks for the link
for:
LGUnitedMobileDriver_S4981CAN35AP22_ML_WHQL_Ver_3.5
i have already the 3.6 driver
i have installed msxml
and it ask to update OMAPFlashInstaller and i accepted
now i'm trying another time with LG support tools - i'm making an online restore (that i have made before and not worked)
the updater finished downloading the new version (about 1 hr) and now it stucks on the update step
____________
Edit: that http program worked now, and the update process worked fine
but it's the same problem, nothing has changed (in the video i posted)
Click to expand...
Click to collapse
You used to KDZ file or Lg auto download update ?
youtube.com/watch?v=xGl8mJXxyFo

I had this problem 2 i have send it to vip service
Sent from my LG-P920 using XDA

for this video: youtube.com/watch?v=xGl8mJXxyFo
i have exactly followed it step by step, and tried the 2 methods:
KDZ falsh and auto download
but, I'm still stuck in this problem
the phone is not usable
HELP please

Try another KDZ file. Finding the right kdz file for your phone.
http://lg-phone-firmware.com/index.php?id_mod=2

littlega said:
Try another KDZ file. Finding the right kdz file for your phone.
http://lg-phone-firmware.com/index.php?id_mod=2
Click to expand...
Click to collapse
tried another one but the same problem
also tried: EMERGENCY instead CS_EMERGENCY
and i hope to know the differences between all these modes
i think the solution may be with flashing a bin file, but i don't have any bin and can't find one (fileserve is blocked now)

ARDV said:
tried another one but the same problem
also tried: EMERGENCY instead CS_EMERGENCY
and i hope to know the differences between all these modes
i think the solution may be with flashing a bin file, but i don't have any bin and can't find one (fileserve is blocked now)
Click to expand...
Click to collapse
Do you boot into recovery and wipe data?

The Dark Lestat said:
Do you boot into recovery and wipe data?
Click to expand...
Click to collapse
i hope that you can track all the thread, you may help
for the recovery, i can't enter into it

ARDV said:
i hope that you can track all the thread, you may help
for the recovery, i can't enter into it
Click to expand...
Click to collapse
Stock Android recovery is annoying to get into.
It takes me 3 - 4 times to boot into it.
Use [Vol Down + 3D] + Power
Try various ways
Hold down the Vol Down + 3D until the screen turns black.
Hold then down until you see the LG logo.
Hold then down while inserting the battery
Also, make sure the power cord is unplugged.
Sent from my Samsung Galaxy S II w/ CM9

[Q] Boot Failure after installing Chainfire 3D

Question:
How to turn back my phone to normal after installing Chainfire 3D v3.3? Or how to uninstall the chainfire 3d driver?
What Happened:
To improve gaming experience, I happen to tumble with Chainfire 3D. I read that this is not compatible with JB. But the notes in the page where I downloaded the Chainfire 3D apk says that it requires ANDROID - 2.1+, so I concluded that JB 4.1 passed the requirement. After installing Chainfire 3D, I installed its drivers, phone automatically reboots, then voila! I am stuck with the SONY logo.
I tried to do some research on how to undo the Chainfire3d installation and i found this:
"To uninstall it I installed ADB, I went to CWM and from console of ADB I executed this: adb shell /system/lib/cf3d_uninstall.sh"
And now my 2nd problem appeared. I CAN'T ENTER THE CWM! T_T
I am wondering why. I remembered entering it when I rooted my phone. (Turn-On, wait for blue led, then press Vol+ and Vol- simultaneously)
But now, it doesn't work anymore. I tried reading some posts here about entering CWM, tried all of them, still no luck.
Now, I am stuck with the SONY logo. What shall I do? T_T
Technical Details:
Rooted Phone: Yes
Bootloader Unlocked: Yes
Phone Model: Sony Xperia J ST26i
Android: Jellybean 4.1
Additional Details:
I rooted my phone using some tutorial that includes a fastboot mode. I read somewhere that using fastboot mode has only temporary recovery mode. Thus, it will be impossible for me to enter CWM since it is not existing anymore in my phone?
A shed of light will be greatly appreciated. A solution would be exemplary. Thanks.
Jay-Arr

Did you read/search the CF thread for similar cases? http://forum.xda-developers.com/showthread.php?t=1087427
It's better to ask this in the Xperia J forum, i've asked for this thread to be moved, hopefully it'll be done fairly quickly.
I dunno much about Xperia devices.

Yeah, I already read that. Unfortunately, after I installed the Chainfire 3D. This problem of mine actually leads me here to XDA.
And there's no information there either on how to undo it if someone happens to installed it on Android 4.1 and above.
I actually read several threads here so far regarding the chainfire 3D limitiations. But none has any solution to my problem.
I wanna try the solution i found, but I couldn't access my CWM. I also read several posts about entering CWM here. But just I said, all of them didn't worked for me.
The worse case could be, I dont have a CWM yet. Given that that is true, and given that I am stuck with the SONY logo, can I still install a CWM on my phone given these circumstances? I also read that there's no CWM yet for Xperia J 4.1 users yet. T_T

Yes that is what i suspected, that you dont have CWM but rather the stock recovery. But i dunno the flashing procedure of xperia well enough.
Maybe enter fastboot and flash a different rom? cm10?

Hi,
Can you check this link for me?
rootlord.blogspot.com/2013/04/root-sony-xperia-j-jellybean-112a021.html?showComment=1371884082709#c8724425202135341446
That's how I rooted my phone. As you can see, I accessed CWM there.
For reference, here's the process:
1. Connect Your Xperia J To Your PC
2. Download This Root File- Root_xperi_signed.zip
3. Copy "root_xperia_signed.zip" file to sd card (ext...)
4. Disconect Your Xperia J and switch it off
5. Launch Xperia flashtool
6. Hold volume + button and connect phone with usb cable to pc, you'll saw blue led light (Now You have entered to Fastboot mode)
7. Download this: Boot.img
8. Copy "boot.img" file to flashtool/firmwares
9. Click on lightening icon in flashtool and click fastboot mode
10. Click "Select kernel to Flash" on right side in flashtool
11. Browse and choose "boot.img" , flashtool will automaticly flash this file
12. Turn off phone after flashing
13. Turn on phone,when you'll see blue light at bottom phone not the small blue led up, start pressing all volume buttons + and - .
14. If you succed,you'll enter to CWM recovery,click "install zip from ext card" and find "root_xperia_signed.zip" file and flash it.
15. After flashing,click reboot system,but don't wait for reboot,just take battery out for few second and put it back
16. Now download: kernal.sin and copy "kernel.sin" file to flashtool/firmwares
17. Follow step 9 and 10.
18. Disconnect phone and Switch It On.
I am thinking, for me to have an access to CWM, maybe i can try to re-do Steps 5 to 13?
What I dont know is that, since I am re-flashing the same image file (back when i rooted my phone), can it result into something unexpected? such as bricking my phone? What's your opinion on this?
Thanks.

Yes, worth a try.
No, i don't think anything odd will happen from flashing that boot.img.

Failed.
I went to all the trouble this guy made, forum.xda-developers.com/showthread.php?t=1124668&page=2
I still ended up in SONY logo in the end. Nothing changed.
By the way, how can I turn ON USB Debugging from PC? From the flashtool it says that it's off, where in fact it's always turned ON before this catastrophe happened to me.

eureckou said:
By the way, how can I turn ON USB Debugging from PC? From the flashtool it says that it's off, where in fact it's always turned ON before this catastrophe happened to me.
Click to expand...
Click to collapse
Not possible http://forum.xda-developers.com/showthread.php?p=27745780
But you should be able to flash roms and boot images from fastboot successfully, wonder what's wrong.

Im down to my last resort i guess. Where can I download ROMS/IMAGES?

Here in the Dev and Original Dev forums http://forum.xda-developers.com/forumdisplay.php?f=1976 of xperia j, read carefully though.

same thing happened to me. Here's what fixed it
Yup same thing happened to me with my galaxy s4. Here's what you gotta do. Install SAMSUNG kie. Going to the tools and there will be a option to restore your phone. Click on it and it will have you enter your model number and serial number and this could be found underneath the battery. After doing that will give you a small directions to follow. Then it will download the latest firmware for your device and bring you to the installation screen. Here have you remove your battery and put it back together and boot into download mode. After this it will have a few boxes for you to check and you'll be able to start it. You'll see loading bar come up it will restore your phone to factory settings. Once you get it all set up again you could use kie to make a backup of your phone. Then you'll be all set.

chainfire not work for jellybean

I gave up on finding a solution for this one. I just flashed a stock ROM using flashtool to my Xperia J. Re-installed everything.
One thing I learned though, read before you click. ^_^
For anyone trying to find xperia official firmwares, here's the link:
http://www.qosmodro.me/2013/01/xperia-2011-official-stock-firmware.html#.UcZx2pxgGJB
Thanks guys.

INSTALLED CHAINFIRE 3d got Stocked on SONY Logo [Xperia J]
I've had the same situation too, here's the fix for it
if you UNLOCKED your BOOTLOADER
RELOCK it, I used Flashtools for UNLOCK and RELOCK
Then install SONY UPDATE SERVICE
REINSTALL YOUR FIRMWARE
that will do the trick

I got the same problem with my xperia j.. please Help
eureckou said:
Hi,
Can you check this link for me?
rootlord.blogspot.com/2013/04/root-sony-xperia-j-jellybean-112a021.html?showComment=1371884082709#c8724425202135341446
That's how I rooted my phone. As you can see, I accessed CWM there.
For reference, here's the process:
1. Connect Your Xperia J To Your PC
2. Download This Root File- Root_xperi_signed.zip
3. Copy "root_xperia_signed.zip" file to sd card (ext...)
4. Disconect Your Xperia J and switch it off
5. Launch Xperia flashtool
6. Hold volume + button and connect phone with usb cable to pc, you'll saw blue led light (Now You have entered to Fastboot mode)
7. Download this: Boot.img
8. Copy "boot.img" file to flashtool/firmwares
9. Click on lightening icon in flashtool and click fastboot mode
10. Click "Select kernel to Flash" on right side in flashtool
11. Browse and choose "boot.img" , flashtool will automaticly flash this file
12. Turn off phone after flashing
13. Turn on phone,when you'll see blue light at bottom phone not the small blue led up, start pressing all volume buttons + and - .
14. If you succed,you'll enter to CWM recovery,click "install zip from ext card" and find "root_xperia_signed.zip" file and flash it.
15. After flashing,click reboot system,but don't wait for reboot,just take battery out for few second and put it back
16. Now download: kernal.sin and copy "kernel.sin" file to flashtool/firmwares
17. Follow step 9 and 10.
18. Disconnect phone and Switch It On.
I am thinking, for me to have an access to CWM, maybe i can try to re-do Steps 5 to 13?
What I dont know is that, since I am re-flashing the same image file (back when i rooted my phone), can it result into something unexpected? such as bricking my phone? What's your opinion on this?
Thanks.
Click to expand...
Click to collapse
Please see the attachment.. Help Me

i even cant anter in cwm what can i do?

PLEASE HELP ME with galaxy S2 SHW-M250K Boot problem

Please guys, my galaxy S2 SHW-M20K (Korean) is in trouble.
I bought it from a 2nd hand shop , and it was runing Android 4.1.2 Jelly Bean (rooted stock rom). I had no problem with it till today when I tried to install "CWM Recovery", After searching the web i found a post with two files that supposedly could do the task. These files are:
1. CWM_KT_M250K.tar
2. Tegrak-Kernel-Build-39-for-SHW-M250K-UE18.tar
Using Odin, I triedd the first file but it couldn't work, and the phone could not boot so i downloaded the "rooted factory firmware" and flashed the phone. Everything was ok. Later I tried the second file. Again the phone could not boot and stuck at the logo with a yellow triangle. After waiting for about 5 minutes I tried to shut it down by pressing the power button it did'nt respond. (Now this is a point that I regret), I removed the battery as a way of forcing to turn it off.
Now my phone cannot boot. It doesn't respond to power button, neither does it allow me to enter recovery mode nor download mode. But When i connect to the charger or pc, it start charging and keeps cutting off the charging frequently. But it only allows me to enter download mode when connected to pc. When I tried to flash the "rooted factory firmware", again, the flashing goes smoothly but when the phone starts rebooting it fails as if there is a power cut. Is my battery damaged? Can someone give me a guide on how to fix it?
I need your help gus, I am not an expert in the rootings and roms,
Pardon My English. It's a foreign language to me.

Gombyz said:
Please guys, my galaxy S2 SHW-M20K (Korean) is in trouble.
I bought it from a 2nd hand shop , and it was runing Android 4.1.2 Jelly Bean (rooted stock rom). I had no problem with it till today when I tried to install "CWM Recovery", After searching the web i found a post with two files that supposedly could do the task. These files are:
1. CWM_KT_M250K.tar
2. Tegrak-Kernel-Build-39-for-SHW-M250K-UE18.tar
Using Odin, I triedd the first file but it couldn't work, and the phone could not boot so i downloaded the "rooted factory firmware" and flashed the phone. Everything was ok. Later I tried the second file. Again the phone could not boot and stuck at the logo with a yellow triangle. After waiting for about 5 minutes I tried to shut it down by pressing the power button it did'nt respond. (Now this is a point that I regret), I removed the battery as a way of forcing to turn it off.
Now my phone cannot boot. It doesn't respond to power button, neither does it allow me to enter recovery mode nor download mode. But When i connect to the charger or pc, it start charging and keeps cutting off the charging frequently. But it only allows me to enter download mode when connected to pc. When I tried to flash the "rooted factory firmware", again, the flashing goes smoothly but when the phone starts rebooting it fails as if there is a power cut. Is my battery damaged? Can someone give me a guide on how to fix it?
I need your help gus, I am not an expert in the rootings and roms,
Pardon My English. It's a foreign language to me.
Click to expand...
Click to collapse
As u mentioned, I think that your phone has gone to a Soft Brick. I don't know much about the Korean build, so Google it to solve the Soft Brick. Try flashing the stock rom via odin but I don't recommend it since it may cause your phone to be hard bricked if not done properly.
So go to the service centre, you'll get more help there

Sushant Rohan said:
As u mentioned, I think that your phone has gone to a Hard Brick. I don't know much about the Korean build, so Google it to solve the Hard Brick. But it is very hard to solve
Click to expand...
Click to collapse
I thank you sir for responding to this. From what you have said, I think the best decision is to take it to Samsung service center. (For I have tried to google it but I couldn't get a solution). I would also like to know if it is repairable, and about the cost, is it worth repairing or should I think of buying a new phone?
I am stranded.

Gombyz said:
Please guys, my galaxy S2 SHW-M20K (Korean) is in trouble.
I bought it from a 2nd hand shop , and it was runing Android 4.1.2 Jelly Bean (rooted stock rom). I had no problem with it till today when I tried to install "CWM Recovery", After searching the web i found a post with two files that supposedly could do the task. These files are:
1. CWM_KT_M250K.tar
2. Tegrak-Kernel-Build-39-for-SHW-M250K-UE18.tar
Using Odin, I triedd the first file but it couldn't work, and the phone could not boot so i downloaded the "rooted factory firmware" and flashed the phone. Everything was ok. Later I tried the second file. Again the phone could not boot and stuck at the logo with a yellow triangle. After waiting for about 5 minutes I tried to shut it down by pressing the power button it did'nt respond. (Now this is a point that I regret), I removed the battery as a way of forcing to turn it off.
Now my phone cannot boot. It doesn't respond to power button, neither does it allow me to enter recovery mode nor download mode. But When i connect to the charger or pc, it start charging and keeps cutting off the charging frequently. But it only allows me to enter download mode when connected to pc. When I tried to flash the "rooted factory firmware", again, the flashing goes smoothly but when the phone starts rebooting it fails as if there is a power cut. Is my battery damaged? Can someone give me a guide on how to fix it?
I need your help gus, I am not an expert in the rootings and roms,
Pardon My English. It's a foreign language to me.
Click to expand...
Click to collapse
Download stock firmware (like xxxx.tar.md5 full Odin package) of ur device ,enter into Download mode of ur device & flash stock firmware with Odin.
Try this...

[HELP!][Lava Iris 349] After Flashing RECOVERY.PAC, UNIT dead...

Hi!
I need help please.
I own a Lava Iris 349 (Cloudphone Ice350e here in the Philippines). I have been SUCCESSFULY flashing of stock roms and custom roms, rooting and installing recovery thru MOBILEUNCLE for this unit several times already then this happened:
Last night, I went to flash the stock ROM V7 through ReasearchDownload. It went well and rebooted well... Next is I rooted the unit using iRoot and it goes normally, rebooted well. Next is I decided to shift from Mobileuncle in installing recovery and instead wanted to try flashing the RECOVERY.PAC through Research download for the FIRST TIME. I proceeded with the process and flashed the said recovery just like any ROM.PAC without realizing that there has to be some unchecking to be done in the settings if you are flashing a RECOVERY file. (Flashing a ROM file doesn't require any modifications in the settings)...
The flashing countinued and it was successful... But NOT really... This time, my unit WON'T CHARGE, WON'T TURN ON, CAN'T BE DETECTED BY ReasearchDownload AND WON'T REACT to anything I do.... It is DEAD... I mean it is practically DEAD...
Someone told me that since I flashed a recovery.PAC just like it's a rom.PAC, it only means that after wiping everything, the system, the data, the cache, the recovery.PAC doesn't contain anything to replace these files (unlike a rom.pac) and the effect was the unit simply became BLANK with no programs to interpret any physical manipulation to the phone. It won't and can't interpret anything like CHARGING, PRESSING THE POWER BUTTON and CONNECTING TO A PC... It simply became a piece of USELESS HARDWARE... Because no software has been intsalled or whatsoever...
Click to expand...
Click to collapse
Now, I am appealing to people here if there is still a way or technique to fuly revive my unit...
Help will always be appeciated...

Solved by myself...
------------ I followed this tut.... ------------------------ TO fully flash your phone.
1. Open Researchdownload
2. Load packet and look for file(first button)
3. Remove check in the following selection
✓EraseRuntimeNV
✓PHASE_CHECK
✓EraseCache
✓EraseData
✓EraseMisc
4. Click in BACKUP page, and UNCHECK ALL and press OK
5. And lastly press the Play button to continue flashing. -------------------
http://firmwares2you.blogspot.com/2014/10/cloudfone-ice-350e-stock-rom-to-unbrick.htmlCredits to this BLOG:

pROAddicts said:
Solved by myself...
------------ I followed this tut.... ------------------------ TO fully flash your phone.
1. Open Researchdownload
2. Load packet and look for file(first button)
3. Remove check in the following selection
✓EraseRuntimeNV
✓PHASE_CHECK
✓EraseCache
✓EraseData
✓EraseMisc
4. Click in BACKUP page, and UNCHECK ALL and press OK
5. And lastly press the Play button to continue flashing. -------------------
http://firmwares2you.blogspot.com/2014/10/cloudfone-ice-350e-stock-rom-to-unbrick.htmlCredits to this BLOG:
Click to expand...
Click to collapse
Research download cant detect phone, are there anything to press while conneceting with usb???????????????

Please anyone tell me the flashing procedure in detailss
Sent from my MI 4W using XDA-Developers mobile app

Just one simple question for professionals ....

Hi guys,
Last week my phone turned off and when i tried to tune it on it didn't
And when i take it to repaire it they told me there that i killed the boot (I don't know what is that means) and they fixed it
And Now i wondering is the problem is the custom roms that was installed on it (CM12.1) or is it because of the tweaks that is wrote in the build.prop
Can Someone answer my question pls

Oussama.m160 said:
Hi guys,
Last week my phone turned off and when i tried to tune it on it didn't
And when i take it to repaire it they told me there that i killed the boot (I don't know what is that means) and they fixed it
And Now i wondering is the problem is the custom roms that was installed on it (CM12.1) or is it because of the tweaks that is wrote in the build.prop
Can Someone answer my question pls
Click to expand...
Click to collapse
you might have bricked your phone

Edzio14 said:
you might have bricked your phone
Click to expand...
Click to collapse
to revive you phone just do it what i said for 100% sure fix
download stock rom- from here http://www.sammobile.com/firmwares/database/GT-S7582/
than download Odin3 v3.07 from here http://odindownload.com
than follow steps
1-back all your data
2-switch off your phone remove battery simcard memory card
3-open odin in pc
4-reinsert battery
5-press volume down key+ home key+power button
phone will boot in the downloading mode
6-now connect your phone to pc
7-click on pda
8-select md5 file
9-click start
and wait till odin pass
and phone will reboot automatically
done
.
.
.
hit thanks if i help you:good:

Oussama.m160 said:
Hi guys,
Last week my phone turned off and when i tried to tune it on it didn't
And when i take it to repaire it they told me there that i killed the boot (I don't know what is that means) and they fixed it
And Now i wondering is the problem is the custom roms that was installed on it (CM12.1) or is it because of the tweaks that is wrote in the build.prop
Can Someone answer my question pls
Click to expand...
Click to collapse
It's almost impossible for a device to brick if you're just reading the instructions carefully. But if you still wonder,
That the CM12.1 bricked your device = You may be flashing a ROM that isn't made for your device
That the build.prop file was modified = You changed something that mustn't be changed on that file

charlesxd2016 said:
to revive you phone just do it what i said for 100% sure fix
download stock rom- from here http://www.sammobile.com/firmwares/database/GT-S7582/
than download Odin3 v3.07 from here http://odindownload.com
than follow steps
1-back all your data
2-switch off your phone remove battery simcard memory card
3-open odin in pc
4-reinsert battery
5-press volume down key+ home key+power button
phone will boot in the downloading mode
6-now connect your phone to pc
7-click on pda
8-select md5 file
9-click start
and wait till odin pass
and phone will reboot automatically
done
.
.
.
hit thanks if i help you:good:
Click to expand...
Click to collapse
First I already take it to repair and they fix it
Second the phone was dead I can't go to download mode or even turned to one
But thanks for helping

Resonas4216 said:
It's almost impossible for a device to brick if you're just reading the instructions carefully. But if you still wonder,
That the CM12.1 bricked your device = You may be flashing a ROM that isn't made for your device
That the build.prop file was modified = You changed something that mustn't be changed on that file
Click to expand...
Click to collapse
The Cm ROM is for my device
But the tweaks I use a lot of them may be this is the reason

Oussama.m160 said:
The Cm ROM is for my device
But the tweaks I use a lot of them may be this is the reason
Click to expand...
Click to collapse
Can you do a factory reset on system boot?