Enjoy!!
https://www.mediafire.com/?659wcf3qyqf70t5
Thanks for the file...may I ask how should I flash it? I am on android 4.3 using echoe rom "the final bean"... should I flash just modem.bin through odin pc or both files (non-hlos)?
Thanks in advance
zapahacks said:
Thanks for the file...may I ask how should I flash it? I am on android 4.3 using echoe rom "the final bean"... should I flash just modem.bin through odin pc or both files (non-hlos)?
Thanks in advance
Click to expand...
Click to collapse
how to flash this modem ... PLEASE!
modem is for 4,4 firmware
flash using Odin 3.09 and place modem.bin in the CP space in Odin
it may not take first time: see these instructions http://forum.xda-developers.com/showthread.php?t=2324667 (do not autoboot and flash twice before booting)
this worked for me as per those instructions
are there any requirements before flashing this modem...ie, req new bootloader? etc? thanks
goothu99 said:
are there any requirements before flashing this modem...ie, req new bootloader? etc? thanks
Click to expand...
Click to collapse
Modem works on MK6 bootloader.... not sure about older versions... you will have mk6 if you took the stock 4.3 update before rooting and such.....
http://forum.xda-developers.com/showthread.php?t=2537495&page=251
From post 2505
Steps should be like this:
1. Start Odin 3.09 on your PC
2. Click CP button and browse for your GSM/LTE .tar file
3. Power phone off completely
4. Enter download mode (press POWER until vibrate, then press the VOL-DOWN button immediately, then VOL-UP to confirm)
5. Connect USB to phone+PC. Odin's ID:COM should then turn blue to show that it's seen the device
6. Click the Start button to flash
Another thread
http://forum.xda-developers.com/showthread.php?t=2636242
really work with ODIN... now I have NC1 modem on my I337M
Thanks!
thanks Man...
djdedonrg said:
Enjoy!!
https://www.mediafire.com/?659wcf3qyqf70t5
Click to expand...
Click to collapse
Thanks, Install and run on Old Bootloader... :good:
---------- Post added at 06:27 PM ---------- Previous post was at 06:21 PM ----------
mirek07 said:
how to flash this modem ... PLEASE!
Click to expand...
Click to collapse
unzip the zip and you flash the modem.bin in the phone section, recommended odin 3.07
** ** your phone in download mode **
---------- Post added at 06:42 PM ---------- Previous post was at 06:27 PM ----------
mirek07 said:
how to flash this modem ... PLEASE!
Click to expand...
Click to collapse
unzip the zip and you flash the modem.bin in the phone section, recommended odin 3.07
** ** your phone in download mode **
---------- Post added at 06:53 PM ---------- Previous post was at 06:42 PM ----------
goothu99 said:
are there any requirements before flashing this modem...ie, req new bootloader? etc? thanks
Click to expand...
Click to collapse
none, just flash with odin, luck
No luck. It won't stick. Tried flashing twice without restarting using Odin 3.09 and used the extracted modem.bin in the CP section.
Sent from my SGH-I337M using XDA Premium 4 mobile app
thanks, i'm coming from an old canadian Rogers MDJ baseband ...I'm running on 4.2.2 iShostock rom and kernel with MDJ but i wish to get it to the newest baseband
Gage_Hero said:
Modem works on MK6 bootloader.... not sure about older versions... you will have mk6 if you took the stock 4.3 update before rooting and such.....
http://forum.xda-developers.com/showthread.php?t=2537495&page=251
From post 2505
Steps should be like this:
1. Start Odin 3.09 on your PC
2. Click CP button and browse for your GSM/LTE .tar file
3. Power phone off completely
4. Enter download mode (press POWER until vibrate, then press the VOL-DOWN button immediately, then VOL-UP to confirm)
5. Connect USB to phone+PC. Odin's ID:COM should then turn blue to show that it's seen the device
6. Click the Start button to flash
Another thread
http://forum.xda-developers.com/showthread.php?t=2636242
Click to expand...
Click to collapse
goothu99 said:
thanks, i'm coming from an old canadian Rogers MDJ baseband ...I'm running on 4.2.2 iShostock rom and kernel with MDJ but i wish to get it to the newest baseband
Click to expand...
Click to collapse
I am not 100% sure it will work with MDJ.... please do some research before you go a head.... maybe check with omgea1.... he may know for sure...
Gage_Hero said:
I am not 100% sure it will work with MDJ.... please do some research before you go a head.... maybe check with omgea1.... he may know for sure...
Click to expand...
Click to collapse
I semi bricked on MDJ bootloader, gage hero advice is sound. Had to do a full return to stock via odin....18hrs. It would be helpful if we could also report our bootloaders we are using when we flash modems.. I'm on MDJ rogers network. Anyway I'm on MK6 modem. What's wrong with MK6? I get service in the elevator!
cantenna said:
I semi bricked on MDJ bootloader, gage hero advice is sound. Had to do a full return to stock via odin....18hrs. It would be helpful if we could also report our bootloaders we are using when we flash modems.. I'm on MDJ rogers network. Anyway I'm on MK6 modem. What's wrong with MK6? I get service in the elevator!
Click to expand...
Click to collapse
NC1 drains less in low service areas, that I can tell for certain after heading over to my girlfriend's house, and not having to charge my phone.
---------- Post added at 03:43 PM ---------- Previous post was at 03:42 PM ----------
goothu99 said:
thanks, i'm coming from an old canadian Rogers MDJ baseband ...I'm running on 4.2.2 iShostock rom and kernel with MDJ but i wish to get it to the newest baseband
Click to expand...
Click to collapse
It should work, just don't touch the non-hlos.bin and you should be okay.
---------- Post added at 03:44 PM ---------- Previous post was at 03:43 PM ----------
cantenna said:
I semi bricked on MDJ bootloader, gage hero advice is sound. Had to do a full return to stock via odin....18hrs. It would be helpful if we could also report our bootloaders we are using when we flash modems.. I'm on MDJ rogers network. Anyway I'm on MK6 modem. What's wrong with MK6? I get service in the elevator!
Click to expand...
Click to collapse
Your problem as near as I could tell from your posts was trying to install the new firmware on a 2 API Level old bootloader. Completely different.
[edit] looking back on it, looks like you blindly flashed the CP package on to what looks like KOT9H from your post history, without reading up on how to appropriately flash a mismatched modem.
Tried flashing this using odin but no luck. It wont stick. Any other method?
Sent from i337m GS4
0mega1 said:
It should work, just don't touch the non-hlos.bin and you should be okay.
Click to expand...
Click to collapse
@0mega1 Are there issues with flashing the NC1 NON-HLOS.bin when you're using the older MDJ or MG1 bootloaders?
theSpam said:
@0mega1 Are there issues with flashing the NC1 NON-HLOS.bin when you're using the older MDJ or MG1 bootloaders?
Click to expand...
Click to collapse
Please do a search on the forums for modem flashing for the i337m and follow those instructions. If you have trouble, please refrain from flashing the modem.
Unless you know what you are doing, you can cause all sorts of trouble for yourself.
Unless you can learn to do it through quick searches, You likely shouldn't be doing it.
Not trying to be rude, trying to save you from a headache.
---------- Post added at 06:22 PM ---------- Previous post was at 06:22 PM ----------
j_r17ca said:
Tried flashing this using odin but no luck. It wont stick. Any other method?
Sent from i337m GS4
Click to expand...
Click to collapse
You didn't flash correctly, or enough times.
Wifi Issue
Hey Guys,
I took the 4.4 update from Rogers using Kies as i was getting the custom error.
I took the NC1 Modem file to match my firmware as it didnt update when the OS updated and everything is working properly except for my Wifi which i cannot turn it on.
Now will the NON-HLOS fix this issue for me or will i need to re-install the OS
I tried to do factory reset, used odin to apply the modem file and do another factory reset.
Any ideas would be great.
Thanks.
Hi I am new here as i was reading your post so yes non-hlos will fix ur wifi issue get a proper non-hlos that should match with NC1 MODEM...
Sent from my SGH-I337M using xda app-developers app
0mega1 said:
Please do a search on the forums for modem flashing for the i337m and follow those instructions. If you have trouble, please refrain from flashing the modem.
Unless you know what you are doing, you can cause all sorts of trouble for yourself.
Unless you can learn to do it through quick searches, You likely shouldn't be doing it.
Not trying to be rude, trying to save you from a headache.
Click to expand...
Click to collapse
Thank you for replying.
I am familiar with baseband flashing though my question was more related to the NON-HLOS partition. I've searched extensively for information about NON-HLOS only to see it labelled as a "WiFi fix" with no additional information. With this lack of information, NON-HLOS compatibility with older bootloaders is certainly not something that has been extensively discussed here or elsewhere.
In any case, I'm still after this information and was wondering if others have any insight.
Just updated to NC1 from MDJ (Bell) and can confirm everything is working great!
Thanks!
Sent from my SGH-I337M using Tapatalk
Related
hello i am on 4.4.2 locked bootloader but rooted. i removed the bloatware.
is there an odin file to flash back to 4.4.2 stock. i need to return my phone to verizon.
how should i restore it back to normal?
thanks
jackpot08 said:
hello i am on 4.4.2 locked bootloader but rooted. i removed the bloatware.
is there an odin file to flash back to 4.4.2 stock. i need to return my phone to verizon.
how should i restore it back to normal?
thanks
Click to expand...
Click to collapse
Possibly a few days out still. This is why people say rename the files to .bak instead of deleting them. You could convince someone to dump there system img and compress it in a tar. It wont be "official" but it will do what you want it to do.
ThePagel said:
Possibly a few days out still. This is why people say rename the files to .bak instead of deleting them. You could convince someone to dump there system img and compress it in a tar. It wont be "official" but it will do what you want it to do.
Click to expand...
Click to collapse
can i just flash an older odin and then update the phone normally?
jackpot08 said:
can i just flash an older odin and then update the phone normally?
Click to expand...
Click to collapse
nope you'll soft brick then be totally sol until a tar file is released
I am currently uploading an Odin 4.4.2 tarball I pulled from kies (tested and working). I'll post the link when done tonight.
---------- Post added at 06:42 AM ---------- Previous post was at 06:23 AM ----------
Here you are:
VRUDNE1
cozzbp said:
I am currently uploading an Odin 4.4.2 tarball I pulled from kies (tested and working). I'll post the link when done tonight.
---------- Post added at 06:42 AM ---------- Previous post was at 06:23 AM ----------
Here you are:
VRUDNE1
Click to expand...
Click to collapse
Can you re-post. After 1hr I have only 140mb from this host and there is no md5 to verify integrity.
untruestory said:
Can you re-post. After 1hr I have only 140mb from this host and there is no md5 to verify integrity.
Click to expand...
Click to collapse
What's a good host to use?
jackpot08 said:
hello i am on 4.4.2 locked bootloader but rooted. i removed the bloatware.
is there an odin file to flash back to 4.4.2 stock. i need to return my phone to verizon.
how should i restore it back to normal?
thanks
Click to expand...
Click to collapse
Here you go:
http://forum.xda-developers.com/showthread.php?t=2795659
[highlight]ALL MODEMS HERE ARE OFFICIAL by SAMSUNG and for the SM-N9005[/highlight]
To decode what the letters/numbers of the modems mean, click here:
http://forum.xda-developers.com/showthread.php?t=1356325
FLASH GUIDE:
Switch off your device completely.
Connect to PC and Power on your phone in Download Mode (Vol Down+Home+Power)
Start Odin v3.09 (be sure it recognised your phone and show ID:COM port number)
Untick Autoreboot
Flash MODEM.BIN (CP slot - unzip it first)
Reboot once again into Download Mode using Vol Down+Home+Power
Tick Autoreboot and flash NON-HLOS.BIN
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off
DOWNLOAD MODEM+NON-HLOS N9005:
N9005XXUGBPB2 :good:New! as of 3/3/2016 Latest [Lollipop]!
Others
N9005XXUGPOK2
N9005XXUGBNL8
N9005DXUGNK1
N9005ZHUENJ1
N9005XXUGNI3
N9005DXUGNH1
N9005XXUGNG1
N9005XXUFNG2
N9005XXUENE3
...uploading previous modems
For bootloaders, older modems and stock ROM's, try here:
https://idlekernel.com/flash-tools/firmware/hlte_SM-N9005XX/
reserved
reserved last
help me
i follow all the step.... but still cannot success
Jojobizarre001 said:
i follow all the step.... but still cannot success
Click to expand...
Click to collapse
odin shows "PASS" message? what error do you see?
Jojobizarre001 said:
i follow all the step.... but still cannot success
Click to expand...
Click to collapse
Try taking out and put back your battery before flashing.
Can I flash 4.3 modem on 4.4.2 ?
I have n9005 on 4.4 at the moment, getting unknown baseband and imei. Problem started after flashing 4.4.2
MuhammadZeeshan7 said:
Can I flash 4.3 modem on 4.4.2 ?
I have n9005 on 4.4 at the moment, getting unknown baseband and imei. Problem started after flashing 4.4.2
Click to expand...
Click to collapse
no you can't... try re-flashing a new one
I have downloaded both g2 and g1 but got md5 error on each.
Questions
Is there any risk that any personal data (photos,apps..and so on) will be lost when flashing modem?
and will this modem work on my note 3? im in sweden
can I take an backup of my old modem?
Camela said:
Is there any risk that any personal data (photos,apps..and so on) will be lost when flashing modem?
and will this modem work on my note 3? im in sweden
can I take an backup of my old modem?
Click to expand...
Click to collapse
1- No
2- Yes
3- Not needed, i will soon upload other modems too. Anyway you can't go back from a newer version (i never needed to test it but people said it's almost impossible to do)
encho said:
I have downloaded both g2 and g1 but got md5 error on each.
Click to expand...
Click to collapse
Remove MD5 extension and unzip the tar file using winrar and then you will find two files, flash modem.bin.
---------- Post added at 07:11 PM ---------- Previous post was at 06:52 PM ----------
Tried lots of time, nothing worked out for me, still having MJ7 the old version..... Can anyone help???
Failed
finally i got whole flash process to work, but its still the same baseband version
Camela said:
finally i got whole flash process to work, but its still the same baseband version
Click to expand...
Click to collapse
sometimes baseband doesn't flash correctly, try again :fingers-crossed:
Camela said:
finally i got whole flash process to work, but its still the same baseband version
Click to expand...
Click to collapse
You need to flash it twice untick autorestart flash ,dont disconnect usb -2.!!power off with button going to reboot auto-hold volume down go in download ,now tick autorestart flash again and you got new baseband. Flashing only once never worked for me
But it should be enough to HOLD POWER OFF UNTIL BLACKSCREEN download mode and flash... So basilcy the the second part of the description over
KaszasM said:
You need to flash it twice untick autorestart flash ,dont disconnect usb -2.!!power off with button going to reboot auto-hold volume down go in download ,now tick autorestart flash again and you got new baseband. Flashing only once never worked for me
But it should be enough to HOLD POWER OFF UNTIL BLACKSCREEN download mode and flash... So basilcy the the second part of the description over
Click to expand...
Click to collapse
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk
zhoowa said:
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
not at all, I usually flash once and it's ok. Sometimes you need to flash twice or even more.
zhoowa said:
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
the diffrence is in the powr off way !! if you turn your device out usually way ,you flash you dont see the new baseband version in the rom , before flash you need to FORCE POWER OFF - HOLD POWER OFF button until BLACK SCREEN ,than right into download mode and flash ,and you get/see new baseband in rom too, if you dont do it like that then the baseband in rom gonna stay the same/old
worked...
Repeated the procedure twice ( 4 flashes ) and then it worked...
Lord Eko said:
no you can't... try re-flashing a new one
Click to expand...
Click to collapse
You were wrong actually. I was having Unknown baseband and flashing any KK modem didn't help.
Now i'm on KK and using JB modem.
I have a Sprint S5 that i already have rooted. It has lollipop 5 on it currently. I would like to upgrade it to MOAR 7.
Can someone please help me or show me a step by step?
I did the root before with no problem but cant figure out how to do it again or upgrade.
Maybe this will help, i have odin 3 open but cant seem to find the file or folder i need to flash MOAR 7.
Custom roms like MOAR are flashed through a custom recovery, not Odin.
---------- Post added at 02:23 PM ---------- Previous post was at 01:36 PM ----------
On top of that, there are very detailed instructions in the first post of the MOAR thread.
Oh ok it said to use odin. So what do i use?
Sent from my SM-G900P using XDA Free mobile app
Re-read it. Use Odin to flash the tar for the latest firmware, flash a custom recovery with Odin, flash MOAR. It's all laid out there.
metalfan78 said:
Re-read it. Use Odin to flash the tar for the latest firmware, flash a custom recovery with Odin, flash MOAR. It's all laid out there.
Click to expand...
Click to collapse
Thanks for all the help i got it done. The 1 thing i did notices is when you need to place the file on your phone just do it as a full zip file not the extracted folder.
Hello,
I bought a S8+ from Telstra in Australia but I'm not sure how to debrand it.
I downloaded a XSA firmware from samfirmware but when I try to flash it, it doesn't work.
Does anyone know how to do it?
Thanks!
brunopiovan said:
Hello,
I bought a S8+ from Telstra in Australia but I'm not sure how to debrand it.
I downloaded a XSA firmware from samfirmware but when I try to flash it, it doesn't work.
Does anyone know how to do it?
Thanks!
Click to expand...
Click to collapse
It should flash no problem i have done it without any issue
Guide me through your steps?
skinza said:
It should flash no problem i have done it without any issue
Guide me through your steps?
Click to expand...
Click to collapse
I deleted the firmware I used, could you tell me which one did you use?
brunopiovan said:
I deleted the firmware I used, could you tell me which one did you use?
Click to expand...
Click to collapse
I used QE5 xsa
Try this
Download the latest xsa
Back up your phone
When your on odin put each file where it must go but dont use home csc use the OTHER one (your phone will factory reset)
Put phone into download mode then hit start
---------- Post added at 03:50 PM ---------- Previous post was at 03:46 PM ----------
brunopiovan said:
I deleted the firmware I used, could you tell me which one did you use?
Click to expand...
Click to collapse
Do you know how to flash firmware using odin?
Thanks I'll give it a try.
Yes I know how to flash it, thanks!
skinza said:
I used QE5 xsa
Try this
Download the latest xsa
Back up your phone
When your on odin put each file where it must go but dont use home csc use the OTHER one (your phone will factory reset)
Put phone into download mode then hit start
---------- Post added at 03:50 PM ---------- Previous post was at 03:46 PM ----------
Do you know how to flash firmware using odin?
Click to expand...
Click to collapse
Could try it just now and it worked. Finally unbranded!
Thanks!
brunopiovan said:
Could try it just now and it worked. Finally unbranded!
Thanks!
Click to expand...
Click to collapse
Will this trip the Knox counter and void the warranty?
bbegg said:
Will this trip the Knox counter and void the warranty?
Click to expand...
Click to collapse
As long as you flash OFFICIAL firmware: NO . . .
I have a sm-g925f which has a u6 bootloader,just asking can it be downgraded?
Go to updato frimware site and find s6 edge rom lolipop and download it after that go to computer and extract your rom zip to become .md5 and download odin 3.0.12 from google open odin boot your phone into downoad mode connect it with computer using usb cable click on ap and select your rom .md5 wait 2 minut and click start enjoy ?
---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------
If you not understand me go to youtube and search how to flash lolipop on s6 edge
Aymen rick azer said:
Go to updato frimware site and find s6 edge rom lolipop and download it after that go to computer and extract your rom zip to become .md5 and download odin 3.0.12 from google open odin boot your phone into downoad mode connect it with computer using usb cable click on ap and select your rom .md5 wait 2 minut and click start enjoy ?
---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------
If you not understand me go to youtube and search how to flash lolipop on s6 edge
Click to expand...
Click to collapse
I cant becuase it wont allow me to downgrade it says failed
noelbisha45 said:
I cant becuase it wont allow me to downgrade it says failed
Click to expand...
Click to collapse
The bootloader that is currently installed on your device probably won't allow downgrading to an older stock firmware, this is very common thing with Samsung devices.
Sent from my LGL84VL using Tapatalk
Droidriven said:
The bootloader that is currently installed on your device probably won't allow downgrading to an older stock firmware, this is very common thing with Samsung devices.
Click to expand...
Click to collapse
So there isnt any other way to flash another bootloader right?
noelbisha45 said:
So there isnt any other way to flash another bootloader right?
Click to expand...
Click to collapse
You aren't understanding, it is the current bootloader itself that prevents flashing a downgraded bootloader. You can try flashing an older system.img but you can't flash anything that contains an older bootloader than the one you have.
There is no way to downgrade the bootloader to allow flashing TWRP or anything else custom.
Sent from my LGL84VL using Tapatalk
Droidriven said:
You aren't understanding, it is the current bootloader itself that prevents flashing a downgraded bootloader. You can try flashing an older system.img but you can't flash anything that contains an older bootloader than the one you have.
There is no way to downgrade the bootloader to allow flashing TWRP or anything else custom.
Click to expand...
Click to collapse
Okay now i understand thanks!
noelbisha45 said:
Okay now i understand thanks!
Click to expand...
Click to collapse
This applies to a lot of Samsung devices, but, there are exceptions. You need to do some searching about your specific model number to verify whether this applies your specific device or not.
Sent from my LGL84VL using Tapatalk