hello i am on 4.4.2 locked bootloader but rooted. i removed the bloatware.
is there an odin file to flash back to 4.4.2 stock. i need to return my phone to verizon.
how should i restore it back to normal?
thanks
jackpot08 said:
hello i am on 4.4.2 locked bootloader but rooted. i removed the bloatware.
is there an odin file to flash back to 4.4.2 stock. i need to return my phone to verizon.
how should i restore it back to normal?
thanks
Click to expand...
Click to collapse
Possibly a few days out still. This is why people say rename the files to .bak instead of deleting them. You could convince someone to dump there system img and compress it in a tar. It wont be "official" but it will do what you want it to do.
ThePagel said:
Possibly a few days out still. This is why people say rename the files to .bak instead of deleting them. You could convince someone to dump there system img and compress it in a tar. It wont be "official" but it will do what you want it to do.
Click to expand...
Click to collapse
can i just flash an older odin and then update the phone normally?
jackpot08 said:
can i just flash an older odin and then update the phone normally?
Click to expand...
Click to collapse
nope you'll soft brick then be totally sol until a tar file is released
I am currently uploading an Odin 4.4.2 tarball I pulled from kies (tested and working). I'll post the link when done tonight.
---------- Post added at 06:42 AM ---------- Previous post was at 06:23 AM ----------
Here you are:
VRUDNE1
cozzbp said:
I am currently uploading an Odin 4.4.2 tarball I pulled from kies (tested and working). I'll post the link when done tonight.
---------- Post added at 06:42 AM ---------- Previous post was at 06:23 AM ----------
Here you are:
VRUDNE1
Click to expand...
Click to collapse
Can you re-post. After 1hr I have only 140mb from this host and there is no md5 to verify integrity.
untruestory said:
Can you re-post. After 1hr I have only 140mb from this host and there is no md5 to verify integrity.
Click to expand...
Click to collapse
What's a good host to use?
jackpot08 said:
hello i am on 4.4.2 locked bootloader but rooted. i removed the bloatware.
is there an odin file to flash back to 4.4.2 stock. i need to return my phone to verizon.
how should i restore it back to normal?
thanks
Click to expand...
Click to collapse
Here you go:
http://forum.xda-developers.com/showthread.php?t=2795659
Related
Enjoy!!
https://www.mediafire.com/?659wcf3qyqf70t5
Thanks for the file...may I ask how should I flash it? I am on android 4.3 using echoe rom "the final bean"... should I flash just modem.bin through odin pc or both files (non-hlos)?
Thanks in advance
zapahacks said:
Thanks for the file...may I ask how should I flash it? I am on android 4.3 using echoe rom "the final bean"... should I flash just modem.bin through odin pc or both files (non-hlos)?
Thanks in advance
Click to expand...
Click to collapse
how to flash this modem ... PLEASE!
modem is for 4,4 firmware
flash using Odin 3.09 and place modem.bin in the CP space in Odin
it may not take first time: see these instructions http://forum.xda-developers.com/showthread.php?t=2324667 (do not autoboot and flash twice before booting)
this worked for me as per those instructions
are there any requirements before flashing this modem...ie, req new bootloader? etc? thanks
goothu99 said:
are there any requirements before flashing this modem...ie, req new bootloader? etc? thanks
Click to expand...
Click to collapse
Modem works on MK6 bootloader.... not sure about older versions... you will have mk6 if you took the stock 4.3 update before rooting and such.....
http://forum.xda-developers.com/showthread.php?t=2537495&page=251
From post 2505
Steps should be like this:
1. Start Odin 3.09 on your PC
2. Click CP button and browse for your GSM/LTE .tar file
3. Power phone off completely
4. Enter download mode (press POWER until vibrate, then press the VOL-DOWN button immediately, then VOL-UP to confirm)
5. Connect USB to phone+PC. Odin's ID:COM should then turn blue to show that it's seen the device
6. Click the Start button to flash
Another thread
http://forum.xda-developers.com/showthread.php?t=2636242
really work with ODIN... now I have NC1 modem on my I337M
Thanks!
thanks Man...
djdedonrg said:
Enjoy!!
https://www.mediafire.com/?659wcf3qyqf70t5
Click to expand...
Click to collapse
Thanks, Install and run on Old Bootloader... :good:
---------- Post added at 06:27 PM ---------- Previous post was at 06:21 PM ----------
mirek07 said:
how to flash this modem ... PLEASE!
Click to expand...
Click to collapse
unzip the zip and you flash the modem.bin in the phone section, recommended odin 3.07
** ** your phone in download mode **
---------- Post added at 06:42 PM ---------- Previous post was at 06:27 PM ----------
mirek07 said:
how to flash this modem ... PLEASE!
Click to expand...
Click to collapse
unzip the zip and you flash the modem.bin in the phone section, recommended odin 3.07
** ** your phone in download mode **
---------- Post added at 06:53 PM ---------- Previous post was at 06:42 PM ----------
goothu99 said:
are there any requirements before flashing this modem...ie, req new bootloader? etc? thanks
Click to expand...
Click to collapse
none, just flash with odin, luck
No luck. It won't stick. Tried flashing twice without restarting using Odin 3.09 and used the extracted modem.bin in the CP section.
Sent from my SGH-I337M using XDA Premium 4 mobile app
thanks, i'm coming from an old canadian Rogers MDJ baseband ...I'm running on 4.2.2 iShostock rom and kernel with MDJ but i wish to get it to the newest baseband
Gage_Hero said:
Modem works on MK6 bootloader.... not sure about older versions... you will have mk6 if you took the stock 4.3 update before rooting and such.....
http://forum.xda-developers.com/showthread.php?t=2537495&page=251
From post 2505
Steps should be like this:
1. Start Odin 3.09 on your PC
2. Click CP button and browse for your GSM/LTE .tar file
3. Power phone off completely
4. Enter download mode (press POWER until vibrate, then press the VOL-DOWN button immediately, then VOL-UP to confirm)
5. Connect USB to phone+PC. Odin's ID:COM should then turn blue to show that it's seen the device
6. Click the Start button to flash
Another thread
http://forum.xda-developers.com/showthread.php?t=2636242
Click to expand...
Click to collapse
goothu99 said:
thanks, i'm coming from an old canadian Rogers MDJ baseband ...I'm running on 4.2.2 iShostock rom and kernel with MDJ but i wish to get it to the newest baseband
Click to expand...
Click to collapse
I am not 100% sure it will work with MDJ.... please do some research before you go a head.... maybe check with omgea1.... he may know for sure...
Gage_Hero said:
I am not 100% sure it will work with MDJ.... please do some research before you go a head.... maybe check with omgea1.... he may know for sure...
Click to expand...
Click to collapse
I semi bricked on MDJ bootloader, gage hero advice is sound. Had to do a full return to stock via odin....18hrs. It would be helpful if we could also report our bootloaders we are using when we flash modems.. I'm on MDJ rogers network. Anyway I'm on MK6 modem. What's wrong with MK6? I get service in the elevator!
cantenna said:
I semi bricked on MDJ bootloader, gage hero advice is sound. Had to do a full return to stock via odin....18hrs. It would be helpful if we could also report our bootloaders we are using when we flash modems.. I'm on MDJ rogers network. Anyway I'm on MK6 modem. What's wrong with MK6? I get service in the elevator!
Click to expand...
Click to collapse
NC1 drains less in low service areas, that I can tell for certain after heading over to my girlfriend's house, and not having to charge my phone.
---------- Post added at 03:43 PM ---------- Previous post was at 03:42 PM ----------
goothu99 said:
thanks, i'm coming from an old canadian Rogers MDJ baseband ...I'm running on 4.2.2 iShostock rom and kernel with MDJ but i wish to get it to the newest baseband
Click to expand...
Click to collapse
It should work, just don't touch the non-hlos.bin and you should be okay.
---------- Post added at 03:44 PM ---------- Previous post was at 03:43 PM ----------
cantenna said:
I semi bricked on MDJ bootloader, gage hero advice is sound. Had to do a full return to stock via odin....18hrs. It would be helpful if we could also report our bootloaders we are using when we flash modems.. I'm on MDJ rogers network. Anyway I'm on MK6 modem. What's wrong with MK6? I get service in the elevator!
Click to expand...
Click to collapse
Your problem as near as I could tell from your posts was trying to install the new firmware on a 2 API Level old bootloader. Completely different.
[edit] looking back on it, looks like you blindly flashed the CP package on to what looks like KOT9H from your post history, without reading up on how to appropriately flash a mismatched modem.
Tried flashing this using odin but no luck. It wont stick. Any other method?
Sent from i337m GS4
0mega1 said:
It should work, just don't touch the non-hlos.bin and you should be okay.
Click to expand...
Click to collapse
@0mega1 Are there issues with flashing the NC1 NON-HLOS.bin when you're using the older MDJ or MG1 bootloaders?
theSpam said:
@0mega1 Are there issues with flashing the NC1 NON-HLOS.bin when you're using the older MDJ or MG1 bootloaders?
Click to expand...
Click to collapse
Please do a search on the forums for modem flashing for the i337m and follow those instructions. If you have trouble, please refrain from flashing the modem.
Unless you know what you are doing, you can cause all sorts of trouble for yourself.
Unless you can learn to do it through quick searches, You likely shouldn't be doing it.
Not trying to be rude, trying to save you from a headache.
---------- Post added at 06:22 PM ---------- Previous post was at 06:22 PM ----------
j_r17ca said:
Tried flashing this using odin but no luck. It wont stick. Any other method?
Sent from i337m GS4
Click to expand...
Click to collapse
You didn't flash correctly, or enough times.
Wifi Issue
Hey Guys,
I took the 4.4 update from Rogers using Kies as i was getting the custom error.
I took the NC1 Modem file to match my firmware as it didnt update when the OS updated and everything is working properly except for my Wifi which i cannot turn it on.
Now will the NON-HLOS fix this issue for me or will i need to re-install the OS
I tried to do factory reset, used odin to apply the modem file and do another factory reset.
Any ideas would be great.
Thanks.
Hi I am new here as i was reading your post so yes non-hlos will fix ur wifi issue get a proper non-hlos that should match with NC1 MODEM...
Sent from my SGH-I337M using xda app-developers app
0mega1 said:
Please do a search on the forums for modem flashing for the i337m and follow those instructions. If you have trouble, please refrain from flashing the modem.
Unless you know what you are doing, you can cause all sorts of trouble for yourself.
Unless you can learn to do it through quick searches, You likely shouldn't be doing it.
Not trying to be rude, trying to save you from a headache.
Click to expand...
Click to collapse
Thank you for replying.
I am familiar with baseband flashing though my question was more related to the NON-HLOS partition. I've searched extensively for information about NON-HLOS only to see it labelled as a "WiFi fix" with no additional information. With this lack of information, NON-HLOS compatibility with older bootloaders is certainly not something that has been extensively discussed here or elsewhere.
In any case, I'm still after this information and was wondering if others have any insight.
Just updated to NC1 from MDJ (Bell) and can confirm everything is working great!
Thanks!
Sent from my SGH-I337M using Tapatalk
Hi guys ,
I have a rooted nexus 5 running on original stock rom with clockwork recovery installed. I have been getting pop ups to download Andriod 5.0 for last 10 days , Every time I download it , it takes me to recovery and than gives me a message "unable to open the package etc." and cancels the install.
I have tried clearing up the cache , did factory reset , same result everytime.
Any suggestions what can i do ?
You need to be 100% stock (including recovery) to accept the OTA. Restore your phone to full stock and try again.
_MetalHead_ said:
You need to be 100% stock (including recovery) to accept the OTA. Restore your phone to full stock and try again.
Click to expand...
Click to collapse
How do I do that ?
This is wifey's phone , if she looses her data 1 more time than I m dead.
Flash the newest factory image in fastboot, just dont flash the userdata image.
Lokke9191 said:
Flash the newest factory image in fastboot, just dont flash the userdata image.
Click to expand...
Click to collapse
So If I just download 5.0.1 (LRX22C) from https://developers.google.com/android/nexus/images and flash it via Fastboot , It will take phone back to Factory state and root will be lost ?
namz said:
So If I just download 5.0.1 (LRX22C) from https://developers.google.com/android/nexus/images and flash it via Fastboot , It will take phone back to Factory state and root will be lost ?
Click to expand...
Click to collapse
Ya root will be lost. Just unzip that image fully. Then flash everything but userdata individually. She wont lose her data or setup. Then fastboot flash twrp. Boot into twrp and install supersu. Good to go.
Lokke9191 said:
Ya root will be lost. Just unzip that image fully. Then flash everything but userdata individually. She wont lose her data or setup. Then fastboot flash twrp. Boot into twrp and install supersu. Good to go.
Click to expand...
Click to collapse
Thanks So i assuming userdata is one of the files that will come once I unzip the downloaded file ?
namz said:
Thanks So i assuming userdata is one of the files that will come once I unzip the downloaded file ?
Click to expand...
Click to collapse
Ya itll be on there. Also you dont need to flash the bootloader either, being that its the same as the 5.0 one.
Lokke9191 said:
Ya itll be on there. Also you dont need to flash the bootloader either, being that its the same as the 5.0 one.
Click to expand...
Click to collapse
Cool Thanks , Btw its on 4.4 atm , so I have flash bootloader file. Will give a try !!
namz said:
Cool Thanks , Btw its on 4.4 atm , so I have flash bootloader file. Will give a try !!
Click to expand...
Click to collapse
wait
---------- Post added at 10:03 PM ---------- Previous post was at 10:01 PM ----------
Lokke9191 said:
wait
Click to expand...
Click to collapse
If its on 4.4 you should do a clean install as its a big upgrade. To save her data, flash the 4.4 recovery, and boot images. That should bring you back to stock so you can just take the ota.
Thatll work as long as you haven't made any further modifications.
Lokke9191 said:
wait
---------- Post added at 10:03 PM ---------- Previous post was at 10:01 PM ----------
If its on 4.4 you should do a clean install as its a big upgrade. To save her data, flash the 4.4 recovery, and boot images. That should bring you back to stock so you can just take the ota.
Thatll work as long as you haven't made any further modifications.
Click to expand...
Click to collapse
Hmm where do I get 4.4 recovery and boot images from
Uh oh. I think you were too late.
namz said:
Hmm where do I get 4.4 recovery and boot images from
Click to expand...
Click to collapse
Is the 4.4 image available from google site?
---------- Post added at 10:08 PM ---------- Previous post was at 10:06 PM ----------
Lokke9191 said:
Is the 4.4 image available from google site?
Click to expand...
Click to collapse
They are here just unzip the proper image
https://developers.google.com/android/nexus/images
lbingham said:
Uh oh. I think you were too late.
Click to expand...
Click to collapse
Lol. I thought he was already on 5.0. Glad i caught him in time. I know how pissed my wife gets when I mod or flash stuff to her phone and she doesn't like the outcome, or the version is buggy, or she has to re setup her stuff. Glad I can help other avoid that
Lokke9191 said:
Is the 4.4 image available from google site?
---------- Post added at 10:08 PM ---------- Previous post was at 10:06 PM ----------
They are here just unzip the proper image
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
OK. So download 4.4.4 and unzip and flash only recovery and boot images via fastboot ( boot images would be files ending with .img , i.e. more than 1 file ?
namz said:
OK. So download 4.4.4 and unzip and flash only recovery and boot images via fastboot ( boot images would be files ending with .img , i.e. more than 1 file ?
Click to expand...
Click to collapse
Flash "boot.img" its only one file. Then flash "recovery. img" also one file. So two files total.
Hello, does someone have the stock recovery for EVA-L09 ?
marmottator said:
Hello, does someone have the stock recovery for EVA-L09 ?
Click to expand...
Click to collapse
If you download this OTA and unzip it there are recovery file in it.
http://www.huaweiblog.de/software/android/marshmallow/huawei-p9-firmware-update-ota-b135/
But i dont know if it works! Try it on your own risk.
Thx for that, but i don't try, risk of brick lol
marmottator said:
Thx for that, but i don't try, risk of brick lol
Click to expand...
Click to collapse
I understand.
If you check this guide on how to root there are recovery file in the download that is for EVA-L09.
http://forum.xda-developers.com/showthread.php?t=3367800
Sent from my Nexus 5X
220volt said:
I understand.
If you check this guide on how to root there are recovery file in the download that is for EVA-L09.
http://forum.xda-developers.com/showthread.php?t=3367800
Sent from my Nexus 5X
Click to expand...
Click to collapse
Oh yes, thx, i see in this folder but i forget where lol
Now, i just find to return full stock and update firmware
marmottator said:
Oh yes, thx, i see in this folder but i forget where lol
Now, i just find to return full stock and update firmware
Click to expand...
Click to collapse
Have you tried the recovery in that folder? Does it work?
Sent from my Nexus 5X
Not yet, but i found in the SRKTool a recovery stock too
I test recovery stock in the srktool. it's work correctly
Back to Vodafone Rom
Does anyone have a backup of the stock UK Vodafone Rom to go back to after testing this Rom?
Martyp9 said:
Does anyone have a backup of the stock UK Vodafone Rom to go back to after testing this Rom?
Click to expand...
Click to collapse
possibly be able to go back to it using the hisuite on windows
Thank you for your reply. I have already flashed the Rom. I was looking for a way back just in things go wrong.
220volt said:
I understand.
If you check this guide on how to root there are recovery file in the download that is for EVA-L09.
http://forum.xda-developers.com/showthread.php?t=3367800
Sent from my Nexus 5X
Click to expand...
Click to collapse
I have uploaded here if it helps anyone.
Stock Recovery Download
You can either use fastboot to flash or the bat file included in this zip file.
Hi all im new in this forum p9. I work with mate7 but now i need some help from you. I need stock recovery.img from EVA-L09C432B383. Can any one upload for me. Thanks
chudy_85 said:
Hi all im new in this forum p9. I work with mate7 but now i need some help from you. I need stock recovery.img from EVA-L09C432B383. Can any one upload for me. Thanks
Click to expand...
Click to collapse
Extracted them from the B383 update.
But im wondering why there are 2 Recovery files, both are the same size but they give back different md5hash sum, that mean that there is something different about them.
But here you are:
https://drive.google.com/file/d/0B2ZDxrvrYT7gQXNWbUJNVmpOTTg/view?usp=sharing
smohanv said:
I have uploaded here if it helps anyone.
Stock Recovery Download
You can either use fastboot to flash or the bat file included in this zip file.
Click to expand...
Click to collapse
Download Links don´t work.
---------- Post added at 06:07 PM ---------- Previous post was at 06:06 PM ----------
xtcislove said:
Extracted them from the B383 update.
But im wondering why there are 2 Recovery files, both are the same size but they give back different md5hash sum, that mean that there is something different about them.
But here you are:
https://drive.google.com/file/d/0B2ZDxrvrYT7gQXNWbUJNVmpOTTg/view?usp=sharing
Click to expand...
Click to collapse
Download link - gDrive- doesn´t work either.
derJack said:
Download Links don´t work.
---------- Post added at 06:07 PM ---------- Previous post was at 06:06 PM ----------
Download link - gDrive- doesn´t work either.
Click to expand...
Click to collapse
look at my signature
I got an issue with an P9 [EVA l_09] after upgrading from latest Marshmallow C432 single SIM to Nougat via SD Card update.app and restart. I did similar updates on 5-10 different devices w/o an issue.
Fist part went fine, but with the second [HW_init] it went into this:
http://www.derjackistweg.de/img_20170601_142722_resized_20170601_022749113
I was not able to flash ANY different update.app after that via SD card [weather Marshmallow 1rst or later version]
The device is stock - NO change in Bootloader
I do not have any recovery from before or whatever.
I do want to use this device in whatever Firmware!
PS: I cannot post by myself. Though my account is 11 (!) years old - I am not experienced enough Back in the day I had more posts of course, XDA made changes over the years.
Hello,
I bought a S8+ from Telstra in Australia but I'm not sure how to debrand it.
I downloaded a XSA firmware from samfirmware but when I try to flash it, it doesn't work.
Does anyone know how to do it?
Thanks!
brunopiovan said:
Hello,
I bought a S8+ from Telstra in Australia but I'm not sure how to debrand it.
I downloaded a XSA firmware from samfirmware but when I try to flash it, it doesn't work.
Does anyone know how to do it?
Thanks!
Click to expand...
Click to collapse
It should flash no problem i have done it without any issue
Guide me through your steps?
skinza said:
It should flash no problem i have done it without any issue
Guide me through your steps?
Click to expand...
Click to collapse
I deleted the firmware I used, could you tell me which one did you use?
brunopiovan said:
I deleted the firmware I used, could you tell me which one did you use?
Click to expand...
Click to collapse
I used QE5 xsa
Try this
Download the latest xsa
Back up your phone
When your on odin put each file where it must go but dont use home csc use the OTHER one (your phone will factory reset)
Put phone into download mode then hit start
---------- Post added at 03:50 PM ---------- Previous post was at 03:46 PM ----------
brunopiovan said:
I deleted the firmware I used, could you tell me which one did you use?
Click to expand...
Click to collapse
Do you know how to flash firmware using odin?
Thanks I'll give it a try.
Yes I know how to flash it, thanks!
skinza said:
I used QE5 xsa
Try this
Download the latest xsa
Back up your phone
When your on odin put each file where it must go but dont use home csc use the OTHER one (your phone will factory reset)
Put phone into download mode then hit start
---------- Post added at 03:50 PM ---------- Previous post was at 03:46 PM ----------
Do you know how to flash firmware using odin?
Click to expand...
Click to collapse
Could try it just now and it worked. Finally unbranded!
Thanks!
brunopiovan said:
Could try it just now and it worked. Finally unbranded!
Thanks!
Click to expand...
Click to collapse
Will this trip the Knox counter and void the warranty?
bbegg said:
Will this trip the Knox counter and void the warranty?
Click to expand...
Click to collapse
As long as you flash OFFICIAL firmware: NO . . .
I have a sm-g925f which has a u6 bootloader,just asking can it be downgraded?
Go to updato frimware site and find s6 edge rom lolipop and download it after that go to computer and extract your rom zip to become .md5 and download odin 3.0.12 from google open odin boot your phone into downoad mode connect it with computer using usb cable click on ap and select your rom .md5 wait 2 minut and click start enjoy ?
---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------
If you not understand me go to youtube and search how to flash lolipop on s6 edge
Aymen rick azer said:
Go to updato frimware site and find s6 edge rom lolipop and download it after that go to computer and extract your rom zip to become .md5 and download odin 3.0.12 from google open odin boot your phone into downoad mode connect it with computer using usb cable click on ap and select your rom .md5 wait 2 minut and click start enjoy ?
---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------
If you not understand me go to youtube and search how to flash lolipop on s6 edge
Click to expand...
Click to collapse
I cant becuase it wont allow me to downgrade it says failed
noelbisha45 said:
I cant becuase it wont allow me to downgrade it says failed
Click to expand...
Click to collapse
The bootloader that is currently installed on your device probably won't allow downgrading to an older stock firmware, this is very common thing with Samsung devices.
Sent from my LGL84VL using Tapatalk
Droidriven said:
The bootloader that is currently installed on your device probably won't allow downgrading to an older stock firmware, this is very common thing with Samsung devices.
Click to expand...
Click to collapse
So there isnt any other way to flash another bootloader right?
noelbisha45 said:
So there isnt any other way to flash another bootloader right?
Click to expand...
Click to collapse
You aren't understanding, it is the current bootloader itself that prevents flashing a downgraded bootloader. You can try flashing an older system.img but you can't flash anything that contains an older bootloader than the one you have.
There is no way to downgrade the bootloader to allow flashing TWRP or anything else custom.
Sent from my LGL84VL using Tapatalk
Droidriven said:
You aren't understanding, it is the current bootloader itself that prevents flashing a downgraded bootloader. You can try flashing an older system.img but you can't flash anything that contains an older bootloader than the one you have.
There is no way to downgrade the bootloader to allow flashing TWRP or anything else custom.
Click to expand...
Click to collapse
Okay now i understand thanks!
noelbisha45 said:
Okay now i understand thanks!
Click to expand...
Click to collapse
This applies to a lot of Samsung devices, but, there are exceptions. You need to do some searching about your specific model number to verify whether this applies your specific device or not.
Sent from my LGL84VL using Tapatalk