¿do you know any procedure for root access for my teclast a11 4.1 jelly bean tablet?
i would like to root it. thanks
duendeskt said:
¿do you know any procedure for root access for my teclast a11 4.1 jelly bean tablet?
i would like to root it. thanks
Click to expand...
Click to collapse
Yes, I rooted my Teclast A11 4.1.1 tablet using the files and methods in this post:
Edit: As a new user I can't seem to post links.
I'll write it out instead.
blog dot sina dot com dot cn slash s slash blog_899fd55d01017nsb.html
Note: The site is in Chinese but google translate worked for me!
The root process was easy - the hard part was finding USB-drivers that worked with the tablet. After browsing through countless Chineese forums I got the advice to install an application called Moborobo. The software itself is quite buggy but the USB-drivers seems to work well.
On a different note - my A11 has a very annoying problem. The numbers in it's MAC address are separated by periods instead of colons. Is that the case with your tablet as well?
This makes the tablet unusable for some applications (i.e. Sonos Controller).
Good luck with your rooting!
Edit 2013-01-04: The latest update fixed my problem with the MAC address. You can get it here: http pan dot baidu dot com / share / link?shareid=147758&uk=489415757&third=0
How to get screen off during hdmi out?
I need to get my tablet screen off during hdmi out. It's kinda irritating and waste of battery with screen on during hdmi out. How to get the tablet off screen during hdmi out to tv?
My tablet (Teclast A11) with stock rom jelly bean 4.1.1 v1.11, dated 20121217.
The previous link you suggested only says N101 and teclast A10. Is A11 applicable too?
Alfred271 said:
I need to get my tablet screen off during hdmi out. It's kinda irritating and waste of battery with screen on during hdmi out. How to get the tablet off screen during hdmi out to tv?
My tablet (Teclast A11) with stock rom jelly bean 4.1.1 v1.11, dated 20121217.
The previous link you suggested only says N101 and teclast A10. Is A11 applicable too?
Click to expand...
Click to collapse
Can't help you with your screen off-problem (you may wanna look in to Tasker as it can do almost everything) but I have successfully rooted my A11 with the instructions in the first link. It's the same chipset so I gave it a go and it worked nicely. No guarantees though...
Verified successfully rooted teclast A11 dual core.
n'Anders said:
Can't help you with your screen off-problem (you may wanna look in to Tasker as it can do almost everything) but I have successfully rooted my A11 with the instructions in the first link. It's the same chipset so I gave it a go and it worked nicely. No guarantees though...
Click to expand...
Click to collapse
Step 1 : Download moborobo. Install it to your laptop/pc.
Step 2 : Download TPSparkyRoot-4.1.1Root.7z use winrar.
Step 3: Check all your resources. Inside [TPSparkyRoot-4.1.1Root] folder you should have:
1: RootExplorer.apk
2. SuperSu.apk
3. TPSparkyRoot.bat
Step 4: Switch on Teclast A11 (with more than 40% of battery) plug into microsd data cable. Wait for moborobo to detect and install tablet driver. Ignore typical windows that ask you for usb device driver. Eventually moborobo will do all the job to connect your tablet to pc.
Step 5: On tablet go to --> setting --> enable usb debugging mode. Click the check box next to it. [USB debugging mode]. Also set display to continuosly ON for 30 mins, to avoid sleep.
Step 6: Launch moborobo. Under --> Home. Click refresh to get your tablet connected.
Step 7: After tablet connected by moborobo. Go to App. Install RootExplorer.apk and SuperSu.apk
Step 8: Launch TPSparkyRoot.bat on your pc. Sit back and wait for tablet to restart.
[ you will get message : Rebooting - 1/3 : Continue once your device finishes rebooting]
Step 9: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : Rebooting - 2/3 : Continue once your device finishes rebooting]
Your tablet rebooting second time.
Step 10: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : uid - 0 (root) gid - 0 (root)
If the uid - 0 then continue (hit any key/enter) if not press control+c.
Suppose you will get uid-0 for both.
Finally done. You've successfully root your device. Enjoy!!
Note: You can check your root access by download "root checker" from google play store.
moborobo has no drivers/ not compatible
Alfred271 said:
Step 1 : Download moborobo. Install it to your laptop/pc.
Step 2 : Download TPSparkyRoot-4.1.1Root.7z use winrar.
Step 3: Check all your resources. Inside [TPSparkyRoot-4.1.1Root] folder you should have:
1: RootExplorer.apk
2. SuperSu.apk
3. TPSparkyRoot.bat
Step 4: Switch on Teclast A11 (with more than 40% of battery) plug into microsd data cable. Wait for moborobo to detect and install tablet driver. Ignore typical windows that ask you for usb device driver. Eventually moborobo will do all the job to connect your tablet to pc.
Step 5: On tablet go to --> setting --> enable usb debugging mode. Click the check box next to it. [USB debugging mode]. Also set display to continuosly ON for 30 mins, to avoid sleep.
Step 6: Launch moborobo. Under --> Home. Click refresh to get your tablet connected.
Step 7: After tablet connected by moborobo. Go to App. Install RootExplorer.apk and SuperSu.apk
Step 8: Launch TPSparkyRoot.bat on your pc. Sit back and wait for tablet to restart.
[ you will get message : Rebooting - 1/3 : Continue once your device finishes rebooting]
Step 9: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : Rebooting - 2/3 : Continue once your device finishes rebooting]
Your tablet rebooting second time.
Step 10: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : uid - 0 (root) gid - 0 (root)
If the uid - 0 then continue (hit any key/enter) if not press control+c.
Suppose you will get uid-0 for both.
Finally done. You've successfully root your device. Enjoy!!
Note: You can check your root access by download "root checker" from google play store.
Click to expand...
Click to collapse
Teclast A11 is not compatible to moborobo (any Teclast is not supported regarding the moborobo compatibility list)
I have tried the whole procedure and always it stucks at installing internal moborobo drivers. So i had no success to root Teclast A11 until now.
There is no real root procedure available which works with Teclast A11.
Has anybody real success to root this device????? Please tell us all how you really done it by yourself.
Thank you very much in advance.
ghostworm
Worked for me
ghostworm said:
Teclast A11 is not compatible to moborobo (any Teclast is not supported regarding the moborobo compatibility list)
I have tried the whole procedure and always it stucks at installing internal moborobo drivers. So i had no success to root Teclast A11 until now.
There is no real root procedure available which works with Teclast A11.
Has anybody real success to root this device????? Please tell us all how you really done it by yourself.
Thank you very much in advance.
ghostworm
Click to expand...
Click to collapse
Well I don't know what to tell you - the drivers that came with Moborobo v2.0.7.501 was the only ones that worked for me. I originally had the Android SDK drivers but they didn't work for me with the Teclast A11. When I uninstalled those drivers and then installed Moborobo I could connect to the tablet.
Btw. I have Windows 7 64bit
Other than that I followed the steps outlined in the link on my first post and my tablet is now rooted.
n'Anders said:
Well I don't know what to tell you - the drivers that came with Moborobo v2.0.7.501 was the only ones that worked for me. I originally had the Android SDK drivers but they didn't work for me with the Teclast A11. When I uninstalled those drivers and then installed Moborobo I could connect to the tablet.
Btw. I have Windows 7 64bit
Other than that I followed the steps outlined in the link on my first post and my tablet is now rooted.
Click to expand...
Click to collapse
hmm i can see that Moborobo is buggy because it allows me now to connect to the teclast over wifi only but it still does not reconize the teclast as teclast a11 over usb, and after Moborobo try to connect, it wants to install drivers but it always stucks at 99% of driver installation. Never installed any driver...
i have win8 pro 64bit
Moboro
ghostworm said:
hmm i can see that Moborobo is buggy because it allows me now to connect to the teclast but it still does not reconize the teclast as teclast a11, and after Moborobo try to connect, it wants to install MoboMarket but it was always denied by the teclast itself, even when i download it manually and try to install.
BTW is it really necessery to install MoboMarket just to root the device???
Click to expand...
Click to collapse
I didn't use any of the Mobo*-applications, the only reason I installed it was the USB-driver.
I see that Alfred271 uses Moboro to install some apps on the tablet - I didn't do that. I only ran TPSparkyRoot.bat as outlined in my first link.
This is the google translated instructions i used (Note that they tested it on a different tablet than the A11 but they share chipset so I tried it).
"1 tablet is turned on
. shut down antivirus, 360 and other similar software download address: file name: TPSparkyRoot-4.1.1Root.7z
Tablet checked USB debugging, to allow the installation of third-party software
PC will be installing a pea pod-like functionality software, connect the USB installation drive
Directly run TPSparkyRoot.bat 6.
Note: In step six. Tablet restart three times, each time you restart Ends need to unlock boot into the desktop, press any key to come back to the computer terminal to the next step.
Test platform:
The original road N101 dual engine 2
Taipower A10 dual-core"
n'Anders said:
I didn't use any of the Mobo*-applications, the only reason I installed it was the USB-driver.
I see that Alfred271 uses Moboro to install some apps on the tablet - I didn't do that. I only ran TPSparkyRoot.bat as outlined in my first link.
This is the google translated instructions i used (Note that they tested it on a different tablet than the A11 but they share chipset so I tried it).
"1 tablet is turned on
. shut down antivirus, 360 and other similar software download address: file name: TPSparkyRoot-4.1.1Root.7z
Tablet checked USB debugging, to allow the installation of third-party software
PC will be installing a pea pod-like functionality software, connect the USB installation drive
Directly run TPSparkyRoot.bat 6.
Note: In step six. Tablet restart three times, each time you restart Ends need to unlock boot into the desktop, press any key to come back to the computer terminal to the next step.
Test platform:
The original road N101 dual engine 2
Taipower A10 dual-core"
Click to expand...
Click to collapse
Ok problem solved
the main problem was Windows 8 !!!!!
I tried it on Windows 7 PC and everything worked well, thank you very much...
:good:
Hi all now i have bought another Teclast A11 with Quad-Core CPU, brand new model with much more power.
The name of the product is the same but the ID is different, before it was "D5S7" and the new is "M5A7". So can i use the same rooting files for???
Thanks in advance
Ghostworm
ghostworm said:
Hi all now i have bought another Teclast A11 with Quad-Core CPU, brand new model with much more power.
The name of the product is the same but the ID is different, before it was "D5S7" and the new is "M5A7". So can i use the same rooting files for???
Thanks in advance
Ghostworm
Click to expand...
Click to collapse
That's unlikely to work as the tablets doesn't share chipset or GPU.
Identify tablet
Hi,
I've bought a generic branded tablet, its make/model is "Hi-Level HLV-T1001W".
It is just like the Teclast A11, say, both of them are the same.
If it is not removed before you see, here is a link of product details: http://www.kare.com.tr/?cmd=UrunDetay&StokNo=28543
i think there is enough english words to understand the page, most of the descriptions are in universal english
I want to root this device. But I'm not sure which rooting procedure is appropriate for this device.
My questions:
How can I compare the firmwares of these devices, and sure they are same each other?
Can/should I use the files and procedure defined in this thread for rooting?
Thanks,
A11: http://www.teclast.org/teclast-a11-dual-core-rk3066-android-4-1-jelly-bean-10-1-inch-ips-16gb.html
atakatas said:
Hi,
I've bought a generic branded tablet, its make/model is "Hi-Level HLV-T1001W".
It is just like the Teclast A11, say, both of them are the same.
If it is not removed before you see, here is a link of product details: http://www.kare.com.tr/?cmd=UrunDetay&StokNo=28543
i think there is enough english words to understand the page, most of the descriptions are in universal english
I want to root this device. But I'm not sure which rooting procedure is appropriate for this device.
My questions:
How can I compare the firmwares of these devices, and sure they are same each other?
Can/should I use the files and procedure defined in this thread for rooting?
Thanks,
A11: http://www.teclast.org/teclast-a11-dual-core-rk3066-android-4-1-jelly-bean-10-1-inch-ips-16gb.html
Click to expand...
Click to collapse
They do look very similar (apart from your tablet having bluetooth) but it's still hard to be sure it will work.
If you're thinking about rooting using the files I linked to I would recommend making sure it has a Rockchip RK3066 chipset.
I'd imagine that the Rockchip batch tool will correctly identify the chipset (and possibly the firmware) for you.
Good luck!
n'Anders said:
They do look very similar (apart from your tablet having bluetooth) but it's still hard to be sure it will work.
If you're thinking about rooting using the files I linked to I would recommend making sure it has a Rockchip RK3066 chipset.
I'd imagine that the Rockchip batch tool will correctly identify the chipset (and possibly the firmware) for you.
Good luck!
Click to expand...
Click to collapse
Thank you for your reply.
It has a Rockchip RK3066 chipset as far as I know from the specifications.
I will give it a try after re-checking with some hardware tools.
So, what is the worst scenario if it is not suitable for my device? Brick it or something like a better case that I can recover it?
atakatas said:
Thank you for your reply.
It has a Rockchip RK3066 chipset as far as I know from the specifications.
I will give it a try after re-checking with some hardware tools.
So, what is the worst scenario if it is not suitable for my device? Brick it or something like a better case that I can recover it?
Click to expand...
Click to collapse
I have read about people that was able to restore their seemingly dead tablets through the Rockchip batch tool but I have (luckily) no experience in that department...
Thank you for your advices.
I think, "Rockchip batch tool" is the best starting point in my case. I found some tutorials on firmware update in other forums, I'll try them later. For now, I can go with it unrooted.
ROM
Hi,
Would any one recommend a good Custom ROM for my Teclast A11? I run on the stock ROM which worked fine till Sunday after which it crashed and i updated with a firmware which is not stable either.
Regards
hello guys, i downloaded the original firmware from:
http://www.teclast.com/tools/pad/putcode.html
just write down your id, it is back on the case.
How to Root and avoid bricking
For those that have an Teclast A11 Dual Core and Quad Core M5A7 I've pass my two last days to make experiments.
I've landed in a Root procedure easy to use, and I have discover how to Unbrick in case of failure of Root.
I'll hope you apreciate the guides. It's took a lot of time to write down them all.
How to Root Teclast A11 Dual Core and Quad Core with Android 4.1.1
How to Unbrick Teclast A11 Quad Core M5A7
How to Update firmware to Android 4.2.2
Sorry for my English, I'm Italian.
Have a nice day.
Hello,
I've just created this thread to merge all Star Galaxy Note 2 Information.
So for that users that don't know this phone i'm going to write down the full specifications:
- 1GHZ MTK6577 Processor
- 5.3" Touch Screen QHD 960 * 540 Pixel
- 512 MB RAM
- 4GB Internal Storage
- Supports up to 32GB Micro SD card
- Rear Camera: 8 MP
- Front Camera: 1.3 MP
- Operating System: Android ICS 4.0
- 3G Network
- Wifi
- GPs
(Comes with Google Apps and Playstore Installed)
This phones is ok! It is fast and fluid.
The building materials are also ok... It is better than i expected.
You can buy it here
How to root it:
- Connect the phone to you computer with the original USB Data Cable
- Enable USB Debugging from Settings (Close all opened programs before doing this)
- Extract and Open the superoneclick attached on this thread
- Click on Root
- Then it will appear 3 windows. Click yes on the first and second one and no on the last.
And that's it!You have your phone Rooted.
PS: If you can't root it with SuperOneClick try with the MTKDroid Tools.
!!! You do this at your own risk !!!
If this information helped you out, don't forget to push the thanks button.
Download SuperOneClick v2.3.3
Download MTK Droid & Tools v2.3.0
Actually i don't want to make this new thread but since i'm new here and can't do a reply to the original thread so i make this. I just want to make a confirmation for Bin4ry who owned this awesome thread "Root MANY ANDROID!" that his tool work on my n7100 clone phone. And i want to make some recap for i have done.
my phone spec is:
processor: Mtk6515
RAM: 512 MB
Android version: Android 4.1.2
my computer spec is:
Brand: Asus ee-pc 1215B
Processor: AMD C-60
OS: Windows 7 32 bit
what i have done is:
1- enabling usb debugging mode and unknown sources function (i'm not installing any adb drivers or something sound like that since the first time)
2- i plug in to my laptop, and my device recognized as "sanstar" but strangely it's reacognized with a name "My HTC" on device manager
3- Run cmd and go to the folder where i put the tools.
4- Type runme.bat and choose "1" but somehow it gaves me some error
5- So i watched Bin4ry video for one more time :highfive:
6- And then, i back to step 3 and type "stuff\adb devices" and wait...... not for long it tells me that my device already connected... YAY :fingers-crossed:
7- I did step 4 again...wait for the process and see if restore function already pop up on my android phone and yep, it's showing something ahehehe
8- Click "restore my data" button....my phone restart after that and tadaaa....there's "superuser" showing up :victory:
So thank you so much, Bin4ry
Hello,
I also have the same phone but I had no luck with this method. After searching for a long time, I found SRSRoot which allowed me to Root my phone. It was a tough fight but I now have a rooted Note II clone...
acoet said:
Actually i don't want to make this new thread but since i'm new here and can't do a reply to the original thread so i make this. I just want to make a confirmation for Bin4ry who owned this awesome thread "Root MANY ANDROID!" that his tool work on my n7100 clone phone. And i want to make some recap for i have done.
my phone spec is:
processor: Mtk6515
RAM: 512 MB
Android version: Android 4.1.2
my computer spec is:
Brand: Asus ee-pc 1215B
Processor: AMD C-60
OS: Windows 7 32 bit
what i have done is:
1- enabling usb debugging mode and unknown sources function (i'm not installing any adb drivers or something sound like that since the first time)
2- i plug in to my laptop, and my device recognized as "sanstar" but strangely it's reacognized with a name "My HTC" on device manager
3- Run cmd and go to the folder where i put the tools.
4- Type runme.bat and choose "1" but somehow it gaves me some error
5- So i watched Bin4ry video for one more time :highfive:
6- And then, i back to step 3 and type "stuff\adb devices" and wait...... not for long it tells me that my device already connected... YAY :fingers-crossed:
7- I did step 4 again...wait for the process and see if restore function already pop up on my android phone and yep, it's showing something ahehehe
8- Click "restore my data" button....my phone restart after that and tadaaa....there's "superuser" showing up :victory:
So thank you so much, Bin4ry
Click to expand...
Click to collapse
need room plz
hi
i am need rom not2 i7100
plz help
model:i7100
fcc id:a3lgti7100
bb chip:mt6515
ms board:gt n7100
kernel ver:3.0.13([email protected])(gcc version 4.4.3(gcc))
android ver .4.1.2
sw ver . s005-ssd-hh-l002
custam build verno.0088130115
phone model:GT-N7100
Brand:samsung
cpu hardware:smdk4412
cpu model:armv7proces rev 2 (v71
cpu frequency:200.0~1400.0 MHz
screen resolation:1280.720
Gpu vendor: imaginatio technologies
gpu renderer: power vr sgx 531
gpu versionopen gl: open gl es-cm 1.1
custom rom
acoet said:
Actually i don't want to make this new thread but since i'm new here and can't do a reply to the original thread so i make this. I just want to make a confirmation for Bin4ry who owned this awesome thread "Root MANY ANDROID!" that his tool work on my n7100 clone phone. And i want to make some recap for i have done.
my phone spec is:
processor: Mtk6515
RAM: 512 MB
Android version: Android 4.1.2
my computer spec is:
Brand: Asus ee-pc 1215B
Processor: AMD C-60
OS: Windows 7 32 bit
what i have done is:
1- enabling usb debugging mode and unknown sources function (i'm not installing any adb drivers or something sound like that since the first time)
2- i plug in to my laptop, and my device recognized as "sanstar" but strangely it's reacognized with a name "My HTC" on device manager
3- Run cmd and go to the folder where i put the tools.
4- Type runme.bat and choose "1" but somehow it gaves me some error
5- So i watched Bin4ry video for one more time :highfive:
6- And then, i back to step 3 and type "stuff\adb devices" and wait...... not for long it tells me that my device already connected... YAY :fingers-crossed:
7- I did step 4 again...wait for the process and see if restore function already pop up on my android phone and yep, it's showing something ahehehe
8- Click "restore my data" button....my phone restart after that and tadaaa....there's "superuser" showing up :victory:
So thank you so much, Bin4ry
Click to expand...
Click to collapse
do have any custom rom for this phone.?
RCA 7 Voyager RCT6773W22 tablet.
Quad Core, 8GB internal storage, Android 4.4.2, one of those Walmart pre-Black Friday specials someone picked up.
Can't say anyone would actually want to replace their Google Nexus or Samsung with one of these, but it would be nice to have this rooted.
Anyone rooted one yet?
Thanks.
BuildInfos
Android version : 4.4.2
Release Codename : REL
API LEVEL : 19
CPU ABI : armeabi-v7a
Manufacturer : Gigabyte
Bootloader : unknown
CPU ABI2 : armeabi
Hardware : mt8127
Radio : unknown
Board : RCT6773W22
Brand : RCA
Device : RCT6773W22
Display : RCT6773W22-ANDROID4.4.2-3101-V25-V1.3.20
Fingerprint : RCA/RCT6773W22/RCT6773W22:4.4.2/KOT49H/1403615884:user/release-keys
Host : emdoor-r710
ID : KOT49H
Model : RCT6773W22
Product : RCT6773W22
Tags : release-keys
Type : user
User : shixiong
Memory
Download Cache Max: 622MB/ Free: 622MB
data Max: 5.17GB/ Free: 3.35GB
External storage: mounted
External storage Max: 5.17GB/ Free: 3.35GB
External storage removable: false
External storage emulated: true
Total RAM: 0.96GB
Free RAM: 173MB
Threshold RAM: 96.00MB
CPU
Processor ARMv7 Processor rev 3 (v7l)
processor 0
BogoMIPS 2590.72
processor 1
BogoMIPS 2590.72
Features swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU implementer 0x41
CPU architecture 7
CPU variant 0x0
CPU part 0xc07
CPU revision 3
Hardware MT8127
Revision 0000
Serial 0000000000000000
Frequency range: 598.0 -> 1300.0MHz
Current Frequency: 1300.0MHz
Frequency Stats (time):
- 1300.0 MHz 19.61% (210909)
- 1196.0 MHz 0.93% (9960)
- 1040.0 MHz 32.03% (344479)
- 747.5 MHz 1.31% (14122)
- 598.0 MHz 46.12% (496001)
I was wondering this myself. I was thinking about picking one up for how cheap it is, still undecided right now.
I just picked up 3 of these for my kids the other day. still waiting for them to ship. was also hoping to be able to root these.
Well I ended up buying one of them. I was searching around Google and found some people had rooted the previous model of our device by using Kingo root. I imagine from Google that this is kingoapp.com but I won't be able to test it probably for at least a week, hopefully less. A video on YouTube shows the same results as well.
i just picked on up for 30 dollars at wallmart black friday im gonna try to root it right now
Following, interested to see if a root gets put in play. Thirty bucks until I get my Note 4 in a few weeks, beats the heck out of my Fire HD!
I hope we get a root method soon I think because these will be popular for black Friday they might g get it rooted
Sent from my RCT6773W22 using XDA Free mobile app
Kingo did not work
Installed Kingo and it would not recognize the device, enabled dev mode and turned on USB debugging still did not work. Let me know if any other solution works.
mbelew said:
Installed Kingo and it would not recognize the device, enabled dev mode and turned on USB debugging still did not work. Let me know if any other solution works.
Click to expand...
Click to collapse
same here
came here for root haha
Kingo app worked fine
Had to manually install adb driver.
Download/unzip the latest android usb drivers from google then add:
;RCA Tablet
%SingleAdbInterface% = USB_Install, USB\VID_0414&PID_0C02&REV_0216&MI_01
%SingleAdbInterface% = USB_Install, USB\VID_0414&PID_0C02&MI_01
after the [Google.NTx86] and [Google.NTamd64] in android_winusb.inf file
Open device manager and point it to that folder and it will give you some snag about unsigned something or other, just say go ahead. Kingoapp recognized it and rooted it in about 2 minutes after a reboot.
ill see what i can do with that
EDIT: IT WORKS!! Thanks dude
Update to Kingo Root
Kingo with their developer mode ADB drivers did Root.
---------- Post added at 03:34 AM ---------- Previous post was at 03:24 AM ----------
If I get a few min I will write a install guide but bottom line
Download Kingo Android Root from kingoapp.com
Install Kingo
But RCA table in Developer mode :
Go to Settings > About Tablet
Tap Build Number 7 times quickly
Click Settings > Developer Options
Enable developer options in the upper right hand corner of the screen.
Plug device into USB cable and attach to computer
If you previously connected the device not in dev mode it installed drivers automatically.
It will now indicated that drivers need to be installed, allow automatic install of new drivers
Start Kingo and follow prompts.
That is it.
mbelew said:
Kingo with their developer mode ADB drivers did Root.
---------- Post added at 03:34 AM ---------- Previous post was at 03:24 AM ----------
If I get a few min I will write a install guide but bottom line
Download Kingo Android Root from kingoapp.com
Install Kingo
But RCA table in Developer mode :
Go to Settings > About Tablet
Tap Build Number 7 times quickly
Click Settings > Developer Options
Enable developer options in the upper right hand corner of the screen.
Plug device into USB cable and attach to computer
If you previously connected the device not in dev mode it installed drivers automatically.
It will now indicated that drivers need to be installed, allow automatic install of new drivers
Start Kingo and follow prompts.
That is it.
Click to expand...
Click to collapse
So all this is on the current update there's no newer update for it??
Confirmed rooted with kingo root. I used PDAnet for drivers.
Picked up one of these for my three year old. Going to give this a try this weekend. Thanks for the info guys.
i just rooted the rca 7 voyager!
1. Download pdanet app from the playstore
2. Download the pdanet file for windows and install it on your pc. plug in your device via usb to make connection.
3. allow it to update android drivers.( this is what you need for KingoRoot to recognize the rca 7 voyager) unplug your device after it connected to the pc.
4. exit the pdanet service running on your pc (in the lower right corner)
5. download KingoRoot onto your pc and run application.
6. plug your rca 7 voyager into the usb and kingoroot will connect a couple times and click finish once you obtain root.
7. go to the play store and update supersu! buy the pro version!
8. you are now rooted!
I was having trouble rooting with Kingo so I used this.
http://www.mgyun.com/en/getvroot
It installed a bunch of chinese apps but I removed them and then installed SuperSU from the Play Store.
Also, any idea if we can install recovery yet? Any kernels for overclocking? Am I being too hopeful? Haha. Great little tablet regardless.
After rooting I started using Xposed framework with Gravity Box and is working great to make it more pleasing.
yojoe600 said:
After rooting I started using Xposed framework with Gravity Box and is working great to make it more pleasing.
Click to expand...
Click to collapse
Now how likely till we have a custom ROM?! Dying for cm 11 or PA
Hello, for those looking on how to root your CHERRY MOBILE FUSION BREEZE 2, here it is guys!
Basic Specs:
4.4 KitKat OS
Dual COre 1.5 GHz
ROM 4GB
RAM 512MB
7" TFT Capacitive 5 point touch screen
Front VGA and rear 2MP camera
MIracast ready and up to 32GB sd card
Instructions:
Download and install your driver on your PC/Laptop HERE!
On your Tablet go to settings > developer options
Enable USB Debugging
Download & Install on your PC/Laptop Root Genius HERE!
Connect your tablet to your PC/Laptop
Run root genius and follow the on-screen instruction, and voila! you're rooted! :highfive:
To check if you're device is rooted download root checker @ PLAYSTORE
Special thanks to:
@droidiser (for the guide in installing the drivers on PC/Laptop)
Cherry Mobile Philippines
XDA Forum