Database Info

Ainol Novo 7 ICS source code was released!

http://developer.mips.com/
I have the basic and the advanced version and no they are not the top of the line tablets but they are the best value for money !
they are quick and responsive unlike any other cheap tablets that are in the market.
I personally also own the Galaxy 8.9 tab and an advent Vega.

16k said:
I have the basic and the advanced version and no they are not the top of the line tablets but they are the best value for money !
they are quick and responsive unlike any other cheap tablets that are in the market.
I personally also own the Galaxy 8.9 tab and an advent Vega.
Click to expand...
Click to collapse
I have flashed this version of ICS on my Novo7 Basic and it works. Too bad there's a bunch of Chinese apps and Adobe Flash doesn't work.
I'll take a look at the source code but in case anyone knows:
Does the MIPS release only support the MIPS SoC and not the surrounding external peripheral chips like WiFi?
I am guessing that since MIPS only knows about its chip, this source code won't have any drivers for external chipsets. For that Ainol will have to release its source code for Android which has all the drivers for the external chips.
If anyone knows for sure, let me know.

I just bought one. What can I do to make it better? For me, that would be to make it accept a 64gb phone card for the maximum amount of memory I can have....also perhaps the internal memory can I increase that?....for even more apps and junk...lol

few things you can do to improve your Tablet.
Download the latest ICS ROM from here : http://www.ainovotablet.com/downloads
and then.
1) Root it
2) install Superuser, Install titanium backup.
3) Remove the bloatware using titanium backup.
after all that should be happy

Tablo 7"
16k said:
Download the latest ICS ROM from here : http://www.ainovotablet.com/downloads
and then.
1) Root it
2) install Superuser, Install titanium backup.
3) Remove the bloatware using titanium backup.
after all that should be happy
Click to expand...
Click to collapse
Hello
Will that work on my Tablo 7" (Allwinner A10 with Mali 400)?, which I think is the same as Scroll Excel, and possibly the same as Novo 7 Advanced but not sure.
Below is the cpu info.
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun4i
Revision : 0000
Serial : 0000000000000000
I already have CWM 5 recovery installed. The CWM recovery key map is
hold menu and power to enter recovery *
volume to cycle options
power to select
back to go back one step
* according to the website, novo 7 is volume up + power

16k said:
Download the latest ICS ROM from here : http://www.ainovotablet.com/downloads
and then.
1) Root it
2) install Superuser, Install titanium backup.
3) Remove the bloatware using titanium backup.
after all that should be happy
Click to expand...
Click to collapse
i search alot of post and i still can't Root my novo7 paladin .. can your please teach me?

you can use the Tasselhof-RootScript.rar
Seems to be working just fine if you follow the steps.
http://www.slatedroid.com/topic/23750-root-ainol-novo-7-tasselhof-root-market-script-tools/
Download Link: Mediafire.com - Tasselhof-RootScript.rar
Alternate Link: DropBox.com - Tasselhof-RootScript.rar
This is a straightforward script.
It's sole purpose is to get your device rooted and provide the tools to verify it.
- Cleaned Up some extra unneeded files and added the Android Market App Upgrade from ContemptX! - Thanks!
I have added some options to Disable and Enable services to hopefully help with battery life.
**IMPORTANT PRE-CHECK LIST**
Connect your tablet using the OTG port (normal procedure)
- YOU MUST USE THE INCLUDED USB CABLE
Make sure USB Debugging is ENABLED
- Settings --> Applications --> Development --> USB debugging (Green Checkmark)
Make sure to check Device Manager to ensure that there aren't any devices with a yellow exclamation mark.
- Right Click on My Computer --> Manage Device --> Device Manager
Here is a link to a driver package I created... (not positive it contains the needed one for this device, but it is a good place to start)
- Download Link: Mediafire.com - Android-USB-MultipleDriverPack.rar

16k said:
you can use the Tasselhof-RootScript.rar
Seems to be working just fine if you follow the steps.
http://www.slatedroid.com/topic/23750-root-ainol-novo-7-tasselhof-root-market-script-tools/
Download Link: Mediafire.com - Tasselhof-RootScript.rar
Alternate Link: DropBox.com - Tasselhof-RootScript.rar
This is a straightforward script.
It's sole purpose is to get your device rooted and provide the tools to verify it.
- Cleaned Up some extra unneeded files and added the Android Market App Upgrade from ContemptX! - Thanks!
I have added some options to Disable and Enable services to hopefully help with battery life.
**IMPORTANT PRE-CHECK LIST**
Connect your tablet using the OTG port (normal procedure)
- YOU MUST USE THE INCLUDED USB CABLE
Make sure USB Debugging is ENABLED
- Settings --> Applications --> Development --> USB debugging (Green Checkmark)
Make sure to check Device Manager to ensure that there aren't any devices with a yellow exclamation mark.
- Right Click on My Computer --> Manage Device --> Device Manager
Here is a link to a driver package I created... (not positive it contains the needed one for this device, but it is a good place to start)
- Download Link: Mediafire.com - Android-USB-MultipleDriverPack.rar
Click to expand...
Click to collapse
thanks ... testing now
---------- Post added at 02:56 AM ---------- Previous post was at 02:33 AM ----------
the root script work half ..
before i can't flash the recovery , it said read only
after i use this script, the superuser not installed ..
but i can flash recovery , and use cwm to flash the superuser..
finally my tablet is work
*** MagicCode for ICS is out

ICS kernel source
Does anyone know where I can find the source code for Linux kernel for Novo 7 Basic (MIPS)?
I looked on the Ingenic site but they have Linux for their older SoCs but not the JZ4770 powering the Novo 7. I went on the Ainol website but it's mostly in Chinese. I am interested in the latest kernel source on which ICS runs on top of.

excellent...

I contacted Ingenic engineering and they said their kernel is 'closed-source' for the jz4770 but they have full sources for their older jzxxx chips for download.. Funny how open source can suddenly become closed when convenient. Shame it would have been fun customizing this mips tablet.

LiquidL said:
I contacted Ingenic engineering and they said their kernel is 'closed-source' for the jz4770 but they have full sources for their older jzxxx chips for download.. Funny how open source can suddenly become closed when convenient. Shame it would have been fun customizing this mips tablet.
Click to expand...
Click to collapse
I suggest to insist. They can't refuse to give access to the used kernel sources, it's Gpl. Only thing they can leave as closed are proprietary hw drivers.
Sent from my Nexus S using XDA App

giobell69 said:
Only thing they can leave as closed are proprietary hw drivers.
Click to expand...
Click to collapse
and you can copy these drivers out of the update.zip provided on their site.
also try this...
http://developer.mips.com/android/android-source-code/

I plan to buy this device next month
but the issue of the mips processor makes me a little hesitant

Say please and than you can open the ROM file system.img in 4.0.3 or 4.0.1??
thanks in advance

oleg9595 said:
Say please and than you can open the ROM file system.img in 4.0.3 or 4.0.1??
Click to expand...
Click to collapse
не уверен, что именно ты хотел спросить, но если тебе нужно добраться до содержимого system.img, это можно сделать в любом линухе командой:
mount system.img system/ -o loop
предварительно создав каталог system/

Teclast a11 tablet 4.1 jelly bean

¿do you know any procedure for root access for my teclast a11 4.1 jelly bean tablet?
i would like to root it. thanks

duendeskt said:
¿do you know any procedure for root access for my teclast a11 4.1 jelly bean tablet?
i would like to root it. thanks
Click to expand...
Click to collapse
Yes, I rooted my Teclast A11 4.1.1 tablet using the files and methods in this post:
Edit: As a new user I can't seem to post links.
I'll write it out instead.
blog dot sina dot com dot cn slash s slash blog_899fd55d01017nsb.html
Note: The site is in Chinese but google translate worked for me!
The root process was easy - the hard part was finding USB-drivers that worked with the tablet. After browsing through countless Chineese forums I got the advice to install an application called Moborobo. The software itself is quite buggy but the USB-drivers seems to work well.
On a different note - my A11 has a very annoying problem. The numbers in it's MAC address are separated by periods instead of colons. Is that the case with your tablet as well?
This makes the tablet unusable for some applications (i.e. Sonos Controller).
Good luck with your rooting!
Edit 2013-01-04: The latest update fixed my problem with the MAC address. You can get it here: http pan dot baidu dot com / share / link?shareid=147758&uk=489415757&third=0

How to get screen off during hdmi out?
I need to get my tablet screen off during hdmi out. It's kinda irritating and waste of battery with screen on during hdmi out. How to get the tablet off screen during hdmi out to tv?
My tablet (Teclast A11) with stock rom jelly bean 4.1.1 v1.11, dated 20121217.
The previous link you suggested only says N101 and teclast A10. Is A11 applicable too?

Alfred271 said:
I need to get my tablet screen off during hdmi out. It's kinda irritating and waste of battery with screen on during hdmi out. How to get the tablet off screen during hdmi out to tv?
My tablet (Teclast A11) with stock rom jelly bean 4.1.1 v1.11, dated 20121217.
The previous link you suggested only says N101 and teclast A10. Is A11 applicable too?
Click to expand...
Click to collapse
Can't help you with your screen off-problem (you may wanna look in to Tasker as it can do almost everything) but I have successfully rooted my A11 with the instructions in the first link. It's the same chipset so I gave it a go and it worked nicely. No guarantees though...

Verified successfully rooted teclast A11 dual core.
n'Anders said:
Can't help you with your screen off-problem (you may wanna look in to Tasker as it can do almost everything) but I have successfully rooted my A11 with the instructions in the first link. It's the same chipset so I gave it a go and it worked nicely. No guarantees though...
Click to expand...
Click to collapse
Step 1 : Download moborobo. Install it to your laptop/pc.
Step 2 : Download TPSparkyRoot-4.1.1Root.7z use winrar.
Step 3: Check all your resources. Inside [TPSparkyRoot-4.1.1Root] folder you should have:
1: RootExplorer.apk
2. SuperSu.apk
3. TPSparkyRoot.bat
Step 4: Switch on Teclast A11 (with more than 40% of battery) plug into microsd data cable. Wait for moborobo to detect and install tablet driver. Ignore typical windows that ask you for usb device driver. Eventually moborobo will do all the job to connect your tablet to pc.
Step 5: On tablet go to --> setting --> enable usb debugging mode. Click the check box next to it. [USB debugging mode]. Also set display to continuosly ON for 30 mins, to avoid sleep.
Step 6: Launch moborobo. Under --> Home. Click refresh to get your tablet connected.
Step 7: After tablet connected by moborobo. Go to App. Install RootExplorer.apk and SuperSu.apk
Step 8: Launch TPSparkyRoot.bat on your pc. Sit back and wait for tablet to restart.
[ you will get message : Rebooting - 1/3 : Continue once your device finishes rebooting]
Step 9: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : Rebooting - 2/3 : Continue once your device finishes rebooting]
Your tablet rebooting second time.
Step 10: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : uid - 0 (root) gid - 0 (root)
If the uid - 0 then continue (hit any key/enter) if not press control+c.
Suppose you will get uid-0 for both.
Finally done. You've successfully root your device. Enjoy!!
Note: You can check your root access by download "root checker" from google play store.

moborobo has no drivers/ not compatible
Alfred271 said:
Step 1 : Download moborobo. Install it to your laptop/pc.
Step 2 : Download TPSparkyRoot-4.1.1Root.7z use winrar.
Step 3: Check all your resources. Inside [TPSparkyRoot-4.1.1Root] folder you should have:
1: RootExplorer.apk
2. SuperSu.apk
3. TPSparkyRoot.bat
Step 4: Switch on Teclast A11 (with more than 40% of battery) plug into microsd data cable. Wait for moborobo to detect and install tablet driver. Ignore typical windows that ask you for usb device driver. Eventually moborobo will do all the job to connect your tablet to pc.
Step 5: On tablet go to --> setting --> enable usb debugging mode. Click the check box next to it. [USB debugging mode]. Also set display to continuosly ON for 30 mins, to avoid sleep.
Step 6: Launch moborobo. Under --> Home. Click refresh to get your tablet connected.
Step 7: After tablet connected by moborobo. Go to App. Install RootExplorer.apk and SuperSu.apk
Step 8: Launch TPSparkyRoot.bat on your pc. Sit back and wait for tablet to restart.
[ you will get message : Rebooting - 1/3 : Continue once your device finishes rebooting]
Step 9: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : Rebooting - 2/3 : Continue once your device finishes rebooting]
Your tablet rebooting second time.
Step 10: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : uid - 0 (root) gid - 0 (root)
If the uid - 0 then continue (hit any key/enter) if not press control+c.
Suppose you will get uid-0 for both.
Finally done. You've successfully root your device. Enjoy!!
Note: You can check your root access by download "root checker" from google play store.
Click to expand...
Click to collapse
Teclast A11 is not compatible to moborobo (any Teclast is not supported regarding the moborobo compatibility list)
I have tried the whole procedure and always it stucks at installing internal moborobo drivers. So i had no success to root Teclast A11 until now.
There is no real root procedure available which works with Teclast A11.
Has anybody real success to root this device????? Please tell us all how you really done it by yourself.
Thank you very much in advance.
ghostworm

Worked for me
ghostworm said:
Teclast A11 is not compatible to moborobo (any Teclast is not supported regarding the moborobo compatibility list)
I have tried the whole procedure and always it stucks at installing internal moborobo drivers. So i had no success to root Teclast A11 until now.
There is no real root procedure available which works with Teclast A11.
Has anybody real success to root this device????? Please tell us all how you really done it by yourself.
Thank you very much in advance.
ghostworm
Click to expand...
Click to collapse
Well I don't know what to tell you - the drivers that came with Moborobo v2.0.7.501 was the only ones that worked for me. I originally had the Android SDK drivers but they didn't work for me with the Teclast A11. When I uninstalled those drivers and then installed Moborobo I could connect to the tablet.
Btw. I have Windows 7 64bit
Other than that I followed the steps outlined in the link on my first post and my tablet is now rooted.

n'Anders said:
Well I don't know what to tell you - the drivers that came with Moborobo v2.0.7.501 was the only ones that worked for me. I originally had the Android SDK drivers but they didn't work for me with the Teclast A11. When I uninstalled those drivers and then installed Moborobo I could connect to the tablet.
Btw. I have Windows 7 64bit
Other than that I followed the steps outlined in the link on my first post and my tablet is now rooted.
Click to expand...
Click to collapse
hmm i can see that Moborobo is buggy because it allows me now to connect to the teclast over wifi only but it still does not reconize the teclast as teclast a11 over usb, and after Moborobo try to connect, it wants to install drivers but it always stucks at 99% of driver installation. Never installed any driver...
i have win8 pro 64bit

Moboro
ghostworm said:
hmm i can see that Moborobo is buggy because it allows me now to connect to the teclast but it still does not reconize the teclast as teclast a11, and after Moborobo try to connect, it wants to install MoboMarket but it was always denied by the teclast itself, even when i download it manually and try to install.
BTW is it really necessery to install MoboMarket just to root the device???
Click to expand...
Click to collapse
I didn't use any of the Mobo*-applications, the only reason I installed it was the USB-driver.
I see that Alfred271 uses Moboro to install some apps on the tablet - I didn't do that. I only ran TPSparkyRoot.bat as outlined in my first link.
This is the google translated instructions i used (Note that they tested it on a different tablet than the A11 but they share chipset so I tried it).
"1 tablet is turned on
. shut down antivirus, 360 and other similar software download address: file name: TPSparkyRoot-4.1.1Root.7z
Tablet checked USB debugging, to allow the installation of third-party software
PC will be installing a pea pod-like functionality software, connect the USB installation drive
Directly run TPSparkyRoot.bat 6.
Note: In step six. Tablet restart three times, each time you restart Ends need to unlock boot into the desktop, press any key to come back to the computer terminal to the next step.
Test platform:
The original road N101 dual engine 2
Taipower A10 dual-core"

n'Anders said:
I didn't use any of the Mobo*-applications, the only reason I installed it was the USB-driver.
I see that Alfred271 uses Moboro to install some apps on the tablet - I didn't do that. I only ran TPSparkyRoot.bat as outlined in my first link.
This is the google translated instructions i used (Note that they tested it on a different tablet than the A11 but they share chipset so I tried it).
"1 tablet is turned on
. shut down antivirus, 360 and other similar software download address: file name: TPSparkyRoot-4.1.1Root.7z
Tablet checked USB debugging, to allow the installation of third-party software
PC will be installing a pea pod-like functionality software, connect the USB installation drive
Directly run TPSparkyRoot.bat 6.
Note: In step six. Tablet restart three times, each time you restart Ends need to unlock boot into the desktop, press any key to come back to the computer terminal to the next step.
Test platform:
The original road N101 dual engine 2
Taipower A10 dual-core"
Click to expand...
Click to collapse
Ok problem solved
the main problem was Windows 8 !!!!!
I tried it on Windows 7 PC and everything worked well, thank you very much...
:good:

Hi all now i have bought another Teclast A11 with Quad-Core CPU, brand new model with much more power.
The name of the product is the same but the ID is different, before it was "D5S7" and the new is "M5A7". So can i use the same rooting files for???
Thanks in advance
Ghostworm

ghostworm said:
Hi all now i have bought another Teclast A11 with Quad-Core CPU, brand new model with much more power.
The name of the product is the same but the ID is different, before it was "D5S7" and the new is "M5A7". So can i use the same rooting files for???
Thanks in advance
Ghostworm
Click to expand...
Click to collapse
That's unlikely to work as the tablets doesn't share chipset or GPU.

Identify tablet
Hi,
I've bought a generic branded tablet, its make/model is "Hi-Level HLV-T1001W".
It is just like the Teclast A11, say, both of them are the same.
If it is not removed before you see, here is a link of product details: http://www.kare.com.tr/?cmd=UrunDetay&StokNo=28543
i think there is enough english words to understand the page, most of the descriptions are in universal english
I want to root this device. But I'm not sure which rooting procedure is appropriate for this device.
My questions:
How can I compare the firmwares of these devices, and sure they are same each other?
Can/should I use the files and procedure defined in this thread for rooting?
Thanks,
A11: http://www.teclast.org/teclast-a11-dual-core-rk3066-android-4-1-jelly-bean-10-1-inch-ips-16gb.html

atakatas said:
Hi,
I've bought a generic branded tablet, its make/model is "Hi-Level HLV-T1001W".
It is just like the Teclast A11, say, both of them are the same.
If it is not removed before you see, here is a link of product details: http://www.kare.com.tr/?cmd=UrunDetay&StokNo=28543
i think there is enough english words to understand the page, most of the descriptions are in universal english
I want to root this device. But I'm not sure which rooting procedure is appropriate for this device.
My questions:
How can I compare the firmwares of these devices, and sure they are same each other?
Can/should I use the files and procedure defined in this thread for rooting?
Thanks,
A11: http://www.teclast.org/teclast-a11-dual-core-rk3066-android-4-1-jelly-bean-10-1-inch-ips-16gb.html
Click to expand...
Click to collapse
They do look very similar (apart from your tablet having bluetooth) but it's still hard to be sure it will work.
If you're thinking about rooting using the files I linked to I would recommend making sure it has a Rockchip RK3066 chipset.
I'd imagine that the Rockchip batch tool will correctly identify the chipset (and possibly the firmware) for you.
Good luck!

n'Anders said:
They do look very similar (apart from your tablet having bluetooth) but it's still hard to be sure it will work.
If you're thinking about rooting using the files I linked to I would recommend making sure it has a Rockchip RK3066 chipset.
I'd imagine that the Rockchip batch tool will correctly identify the chipset (and possibly the firmware) for you.
Good luck!
Click to expand...
Click to collapse
Thank you for your reply.
It has a Rockchip RK3066 chipset as far as I know from the specifications.
I will give it a try after re-checking with some hardware tools.
So, what is the worst scenario if it is not suitable for my device? Brick it or something like a better case that I can recover it?

atakatas said:
Thank you for your reply.
It has a Rockchip RK3066 chipset as far as I know from the specifications.
I will give it a try after re-checking with some hardware tools.
So, what is the worst scenario if it is not suitable for my device? Brick it or something like a better case that I can recover it?
Click to expand...
Click to collapse
I have read about people that was able to restore their seemingly dead tablets through the Rockchip batch tool but I have (luckily) no experience in that department...

Thank you for your advices.
I think, "Rockchip batch tool" is the best starting point in my case. I found some tutorials on firmware update in other forums, I'll try them later. For now, I can go with it unrooted.

ROM
Hi,
Would any one recommend a good Custom ROM for my Teclast A11? I run on the stock ROM which worked fine till Sunday after which it crashed and i updated with a firmware which is not stable either.
Regards

hello guys, i downloaded the original firmware from:
http://www.teclast.com/tools/pad/putcode.html
just write down your id, it is back on the case.

How to Root and avoid bricking
For those that have an Teclast A11 Dual Core and Quad Core M5A7 I've pass my two last days to make experiments.
I've landed in a Root procedure easy to use, and I have discover how to Unbrick in case of failure of Root.
I'll hope you apreciate the guides. It's took a lot of time to write down them all.
How to Root Teclast A11 Dual Core and Quad Core with Android 4.1.1
How to Unbrick Teclast A11 Quad Core M5A7
How to Update firmware to Android 4.2.2
Sorry for my English, I'm Italian.
Have a nice day.

Help with Natpc x210 also known as Kingpad Flytouch 9

Hi There
I'm fairly new to this android stuff but starting to get my head round some of it, I have a Natpc x210 also known as Kingpad Flytouch 9 I have managed to root it but now there are some things I would like to do
First I would like to back up my original firmware and from what I have read I need to use clockwork but I get an error message when I try and install this saying it isn't compatible with my tablet so does anyone know how I can do a backup of my original firmware (rom).
I would also like to edit the build prop to try and cure the incompatibility of some of the game on Google market, would it be possible for someone to tell me what exactly to edit in the build prop, I have heard of people putting there tablets into a loop and almost bricking them so I want to be sure what I'm doing.
And I would also like to know if there are any custom Roms I could try on this tablet.
Below is the spec
CPU : Rockchip Dual Core (2 x 1.5GHz)
Graphics Processor : 4 x Mali 400 MHz
Touchscreen : 1024 x 600 10-point touch 10.1" CAPACITIVE;
Operating System : Android 4.1.1 JELLY BEAN
Memory : 1GB DDR III / 16GB NAND Flash - upgradeable by Micro SD memory card (max 32GB)
WiFi : 802.11 b/g/n
Connectivity : 1 x Micro SD slot, 1 x AC Jack, 1 x 3.5mm Earphone Jack, 2 x MINI Size USB, 1 x mini HDMI out
Camera : 0.3mp Front facing / 2.0mp rear facing
Android Market / Google Play Store : YES
G Sensor : YES
Dimensions : 253 x 167 x 13mm
Weight :480g
Cheers
Fermec

Hi fermec i don't have any answers for you but wondering if you cold help me i have the same device as you and am trying to root it. Could you post the method you used.,especaly how to get usb driver, thanks

I came across this post for rooting Rockchip 3066 tablets.
How to Root Teclast A10 Dual-core
The tool is all in Chinese but you don't need to read whats happening anyway. The tablet reboots itself twice. After the first reboot I had to hard reset.
These are the steps.
Install app on Windows (7Pro x64)
turn developer mode on device (Sumvision Cyclone Titan 9.7", Rockchip 3066, Mali400, Android 4.0.4)
plug the device in and wait for the tool to recognize it
click the button next to the only english word on the app 'ROOT'
wait a minute or two and the device reboots
i had to hard reset here
turn on device again
after a minute the tablet rebooted
walla, Rooted rockchip 3066 device.
link for Root Tool
http://www.multiupload.nl/5L8T1YRAC6
I have managed to root my tablet (natpc x210) using this method but this is the way had to do it, to get my laptop win xp 32bit to see the tablet i had to install ADB Driver this is a setup file then I attached the laptop put the tablet in usb debug mode, then I started the software and it automatically sees the tablet, then just click root wait for it to finish and that is it rooted,
Worked a treat for me
Fermec

Thanks for reply and links, did all of that wasn't sure about ABD thing so i used morobo ,now my tablet says it's rooted according to a few apps that check for root but the apps i want eg titanium rb sync wont install any thoughts ?. Thanks again for your help

Maybe you need to install busybox to make them run properly?

flytouch 9
omgomg said:
Maybe you need to install busybox to make them run properly?
Click to expand...
Click to collapse
I use this metod ,stuff24.de/blog/howto-root-minix-neo-x5-g4-rk3066/
use update 1 ,and install supersu.
Working good For flytouch 9

Is there a custom rom avalible for Natpc x210 also known as Kingpad Flytouch 9

[Confirmation] Samsung N7100 clone (Chinese version) rooted now

Actually i don't want to make this new thread but since i'm new here and can't do a reply to the original thread so i make this. I just want to make a confirmation for Bin4ry who owned this awesome thread "Root MANY ANDROID!" that his tool work on my n7100 clone phone. And i want to make some recap for i have done.
my phone spec is:
processor: Mtk6515
RAM: 512 MB
Android version: Android 4.1.2
my computer spec is:
Brand: Asus ee-pc 1215B
Processor: AMD C-60
OS: Windows 7 32 bit
what i have done is:
1- enabling usb debugging mode and unknown sources function (i'm not installing any adb drivers or something sound like that since the first time)
2- i plug in to my laptop, and my device recognized as "sanstar" but strangely it's reacognized with a name "My HTC" on device manager
3- Run cmd and go to the folder where i put the tools.
4- Type runme.bat and choose "1" but somehow it gaves me some error
5- So i watched Bin4ry video for one more time :highfive:
6- And then, i back to step 3 and type "stuff\adb devices" and wait...... not for long it tells me that my device already connected... YAY :fingers-crossed:
7- I did step 4 again...wait for the process and see if restore function already pop up on my android phone and yep, it's showing something ahehehe
8- Click "restore my data" button....my phone restart after that and tadaaa....there's "superuser" showing up :victory:
So thank you so much, Bin4ry

Hello,
I also have the same phone but I had no luck with this method. After searching for a long time, I found SRSRoot which allowed me to Root my phone. It was a tough fight but I now have a rooted Note II clone...
acoet said:
Actually i don't want to make this new thread but since i'm new here and can't do a reply to the original thread so i make this. I just want to make a confirmation for Bin4ry who owned this awesome thread "Root MANY ANDROID!" that his tool work on my n7100 clone phone. And i want to make some recap for i have done.
my phone spec is:
processor: Mtk6515
RAM: 512 MB
Android version: Android 4.1.2
my computer spec is:
Brand: Asus ee-pc 1215B
Processor: AMD C-60
OS: Windows 7 32 bit
what i have done is:
1- enabling usb debugging mode and unknown sources function (i'm not installing any adb drivers or something sound like that since the first time)
2- i plug in to my laptop, and my device recognized as "sanstar" but strangely it's reacognized with a name "My HTC" on device manager
3- Run cmd and go to the folder where i put the tools.
4- Type runme.bat and choose "1" but somehow it gaves me some error
5- So i watched Bin4ry video for one more time :highfive:
6- And then, i back to step 3 and type "stuff\adb devices" and wait...... not for long it tells me that my device already connected... YAY :fingers-crossed:
7- I did step 4 again...wait for the process and see if restore function already pop up on my android phone and yep, it's showing something ahehehe
8- Click "restore my data" button....my phone restart after that and tadaaa....there's "superuser" showing up :victory:
So thank you so much, Bin4ry
Click to expand...
Click to collapse

need room plz
hi
i am need rom not2 i7100
plz help
model:i7100
fcc id:a3lgti7100
bb chip:mt6515
ms board:gt n7100
kernel ver:3.0.13([email protected])(gcc version 4.4.3(gcc))
android ver .4.1.2
sw ver . s005-ssd-hh-l002
custam build verno.0088130115
phone model:GT-N7100
Brand:samsung
cpu hardware:smdk4412
cpu model:armv7proces rev 2 (v71
cpu frequency:200.0~1400.0 MHz
screen resolation:1280.720
Gpu vendor: imaginatio technologies
gpu renderer: power vr sgx 531
gpu versionopen gl: open gl es-cm 1.1

custom rom
acoet said:
Actually i don't want to make this new thread but since i'm new here and can't do a reply to the original thread so i make this. I just want to make a confirmation for Bin4ry who owned this awesome thread "Root MANY ANDROID!" that his tool work on my n7100 clone phone. And i want to make some recap for i have done.
my phone spec is:
processor: Mtk6515
RAM: 512 MB
Android version: Android 4.1.2
my computer spec is:
Brand: Asus ee-pc 1215B
Processor: AMD C-60
OS: Windows 7 32 bit
what i have done is:
1- enabling usb debugging mode and unknown sources function (i'm not installing any adb drivers or something sound like that since the first time)
2- i plug in to my laptop, and my device recognized as "sanstar" but strangely it's reacognized with a name "My HTC" on device manager
3- Run cmd and go to the folder where i put the tools.
4- Type runme.bat and choose "1" but somehow it gaves me some error
5- So i watched Bin4ry video for one more time :highfive:
6- And then, i back to step 3 and type "stuff\adb devices" and wait...... not for long it tells me that my device already connected... YAY :fingers-crossed:
7- I did step 4 again...wait for the process and see if restore function already pop up on my android phone and yep, it's showing something ahehehe
8- Click "restore my data" button....my phone restart after that and tadaaa....there's "superuser" showing up :victory:
So thank you so much, Bin4ry
Click to expand...
Click to collapse
do have any custom rom for this phone.?

Successfully ROOTED O+ 8.52 via Root Genius

Successfully rooted O+ 8.52!!
O+ 8.52 (Philippines) Specs
Android 4.1.1 Jelly Bean
4-inch WVGA (480×800) IPS Display
MT6577 1GHz dual-core processor
PowerVR SGX 531
512MB RAM
4GB internal memory
5-megapixel autofocus rear camera with LED flash
720p HD video recording
VGA front camera
3G, HSDPA, HSUPA
Wi-Fi, Wi-Fi hotspot
Bluetooth
microUSB v2.0
GPS, A-GPS
Dual SIM, Dual-Standby
Air Shuffle
1450mAh Li-Ion battery
**NOTE**
>Before rooting the phone unmount the SD-Card/External Storage.
>Un-check the "allow mock location" under Developers Option(where USB Debugging is located)
>Proper installation of ADB drivers and required drivers. Google PDAnet application to get proper drivers without hassles ^_^
>Download >> androidxda . com/data/RootGenius . exe << latest version for English site, CH site(original) >> www . sjroot . com <<.
**STEPS**
#1
install the downloaded software and drivers on your computer (I used my old Windows XP SP2 PC)!!
*Root Genius (doesn't really required installation)
*ADB drivers or the PDAnet application
#2
run or open the Root Genius app.
*it will ask to connect your phone with "USB Debugging mode" enabled or checked via Settings > Developer Option.
#3
connect your phone and wait for app to detect your phone and then just click on the "Next" button on the bottom right corner of the app.
#4
watch your phone carefully and wait for the "green" progress bar to fill up, usually on 27% you will notice on your phone that Root Genius is working/doing the rooting it will flash at least twice.
#5
when you see the "Congratulation your phone is successfully rooted!" on your computer screen that's it!
#6
verifying root;
*disconnect your phone from PC and reboot the phone.
*look for the Kinguser app on your phone.
*use Root checker app found on the playstore.
*use any app that requires root access.
#7
That's all folks, hope I helped =))

Jin14Jin said:
Successfully rooted O+ 8.52!!
O+ 8.52 (Philippines) Specs
Android 4.1.1 Jelly Bean
4-inch WVGA (480×800) IPS Display
MT6577 1GHz dual-core processor
PowerVR SGX 531
512MB RAM
4GB internal memory
5-megapixel autofocus rear camera with LED flash
720p HD video recording
VGA front camera
3G, HSDPA, HSUPA
Wi-Fi, Wi-Fi hotspot
Bluetooth
microUSB v2.0
GPS, A-GPS
Dual SIM, Dual-Standby
Air Shuffle
1450mAh Li-Ion battery
**NOTE**
>Before rooting the phone unmount the SD-Card/External Storage.
>Un-check the "allow mock location" under Developers Option(where USB Debugging is located)
>Proper installation of ADB drivers and required drivers. Google PDAnet application to get proper drivers without hassles ^_^
>Download >> androidxda . com/data/RootGenius . exe << latest version for English site, CH site(original) >> www . sjroot . com <<.
**STEPS**
#1
install the downloaded software and drivers on your computer (I used my old Windows XP SP2 PC)!!
*Root Genius (doesn't really required installation)
*ADB drivers or the PDAnet application
#2
run or open the Root Genius app.
*it will ask to connect your phone with "USB Debugging mode" enabled or checked via Settings > Developer Option.
#3
connect your phone and wait for app to detect your phone and then just click on the "Next" button on the bottom right corner of the app.
#4
watch your phone carefully and wait for the "green" progress bar to fill up, usually on 27% you will notice on your phone that Root Genius is working/doing the rooting it will flash at least twice.
#5
when you see the "Congratulation your phone is successfully rooted!" on your computer screen that's it!
#6
verifying root;
*disconnect your phone from PC and reboot the phone.
*look for the Kinguser app on your phone.
*use Root checker app found on the playstore.
*use any app that requires root access.
#7
That's all folks, hope I helped =))
Click to expand...
Click to collapse
Sir im a newbie, is your post rooting tested? i want to root my oplus 8.52...

landyz64 said:
Sir im a newbie, is your post rooting tested? i want to root my oplus 8.52...
Click to expand...
Click to collapse
I missed your post... yup it is, nothing went wrong to my O+ 8.52 After i rooted it and changing the superuser app.