Database Info

Help with Natpc x210 also known as Kingpad Flytouch 9

Hi There
I'm fairly new to this android stuff but starting to get my head round some of it, I have a Natpc x210 also known as Kingpad Flytouch 9 I have managed to root it but now there are some things I would like to do
First I would like to back up my original firmware and from what I have read I need to use clockwork but I get an error message when I try and install this saying it isn't compatible with my tablet so does anyone know how I can do a backup of my original firmware (rom).
I would also like to edit the build prop to try and cure the incompatibility of some of the game on Google market, would it be possible for someone to tell me what exactly to edit in the build prop, I have heard of people putting there tablets into a loop and almost bricking them so I want to be sure what I'm doing.
And I would also like to know if there are any custom Roms I could try on this tablet.
Below is the spec
CPU : Rockchip Dual Core (2 x 1.5GHz)
Graphics Processor : 4 x Mali 400 MHz
Touchscreen : 1024 x 600 10-point touch 10.1" CAPACITIVE;
Operating System : Android 4.1.1 JELLY BEAN
Memory : 1GB DDR III / 16GB NAND Flash - upgradeable by Micro SD memory card (max 32GB)
WiFi : 802.11 b/g/n
Connectivity : 1 x Micro SD slot, 1 x AC Jack, 1 x 3.5mm Earphone Jack, 2 x MINI Size USB, 1 x mini HDMI out
Camera : 0.3mp Front facing / 2.0mp rear facing
Android Market / Google Play Store : YES
G Sensor : YES
Dimensions : 253 x 167 x 13mm
Weight :480g
Cheers
Fermec

Hi fermec i don't have any answers for you but wondering if you cold help me i have the same device as you and am trying to root it. Could you post the method you used.,especaly how to get usb driver, thanks

I came across this post for rooting Rockchip 3066 tablets.
How to Root Teclast A10 Dual-core
The tool is all in Chinese but you don't need to read whats happening anyway. The tablet reboots itself twice. After the first reboot I had to hard reset.
These are the steps.
Install app on Windows (7Pro x64)
turn developer mode on device (Sumvision Cyclone Titan 9.7", Rockchip 3066, Mali400, Android 4.0.4)
plug the device in and wait for the tool to recognize it
click the button next to the only english word on the app 'ROOT'
wait a minute or two and the device reboots
i had to hard reset here
turn on device again
after a minute the tablet rebooted
walla, Rooted rockchip 3066 device.
link for Root Tool
http://www.multiupload.nl/5L8T1YRAC6
I have managed to root my tablet (natpc x210) using this method but this is the way had to do it, to get my laptop win xp 32bit to see the tablet i had to install ADB Driver this is a setup file then I attached the laptop put the tablet in usb debug mode, then I started the software and it automatically sees the tablet, then just click root wait for it to finish and that is it rooted,
Worked a treat for me
Fermec

Thanks for reply and links, did all of that wasn't sure about ABD thing so i used morobo ,now my tablet says it's rooted according to a few apps that check for root but the apps i want eg titanium rb sync wont install any thoughts ?. Thanks again for your help

Maybe you need to install busybox to make them run properly?

flytouch 9
omgomg said:
Maybe you need to install busybox to make them run properly?
Click to expand...
Click to collapse
I use this metod ,stuff24.de/blog/howto-root-minix-neo-x5-g4-rk3066/
use update 1 ,and install supersu.
Working good For flytouch 9

Is there a custom rom avalible for Natpc x210 also known as Kingpad Flytouch 9

[Q] flash MTK6575

Hello every one i have an issue here, i got a chinese device a samsung galaxy s(it says its an S4 but i think it is an S3)its a 1Ghz dual core processor if im not wrong(firmware use to say MT6575_S01)
it had loaded apparently a wrong rom, the device wasnt loading OS and restore wasnt working, i tryed to flash a new rom with Android Flash Tools, and the device got bricked, i am able to connected to the computer, the device does not turn on, does not charge, but the PC is able to detected as a MTK USB Port Com.
i found that trying to load different rom with the same tool was not possible cause it gives me an error just before start downloading the info(this is because the device lost connection on the device manager) so it doesnt charge anything.
as i already mention i am able to install drivers, but all of them goes like a Com Port, i used USBDeview and i am able to see the old MTK65xx usb drivers but the direction for that port its not valid(at least it does not recognize the device as a USB directly)
i was wondering if any one can help me with this, i need to know if there is any way to prevent windows from disconecting this device or if there is any way to make the device go on away, if i can do that i am sure i can load the image to it.
BTW i tryed a few roms and some of them tell me they cant complete the process cause not enough space, cause it looks like they are for another device.
my system and device specs (device as far as i can get)
device :
CPU MTK6575
Model: M-9162 cnc moviles (could not find any website related to them)
as far as i know the processor is a 1.2 Ghz dual core
512 RAM
dual SIM
8 MP cam (back)
as far as i know it could be 2MP or 1.3 MP on front
Front camera and sensors are located on the left side(not on the rigth side like most of galaxy S· and S$ even clones)
use battery
model : 303
li-ion 2200mAh(it says samsung)
PC SPECS :
Windows 7 64 bits OS
dual core 2.4Ghx processor
4G on ram.
Please help me with this and i will love you all forever
PD : i belive that the model is a replica of I9200 but not sure .
THANKS.

mk6575 bricked device
as an update i manage it to flash a nand rom apparently for an s3 mt6575 NAND memory, but i am not sure if it is the right one, cause memory on smarth phone android dlashing tool, shows flashing 2g of ram and this is my memory test results :
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x10000000 (256MB/2048Mb)
NAND Flash:
Device ID = "[HYNIX] H8BCS0UN0MCR" (100)
Size = 0x20000000 (512MB/4096Mb)
i went to complete succesfull flashing but only ligths up the menu and back touch keys
apparently goes on but the display remains black
any help please c:

Successfully ROOTED O+ 8.52 via Root Genius

Successfully rooted O+ 8.52!!
O+ 8.52 (Philippines) Specs
Android 4.1.1 Jelly Bean
4-inch WVGA (480×800) IPS Display
MT6577 1GHz dual-core processor
PowerVR SGX 531
512MB RAM
4GB internal memory
5-megapixel autofocus rear camera with LED flash
720p HD video recording
VGA front camera
3G, HSDPA, HSUPA
Wi-Fi, Wi-Fi hotspot
Bluetooth
microUSB v2.0
GPS, A-GPS
Dual SIM, Dual-Standby
Air Shuffle
1450mAh Li-Ion battery
**NOTE**
>Before rooting the phone unmount the SD-Card/External Storage.
>Un-check the "allow mock location" under Developers Option(where USB Debugging is located)
>Proper installation of ADB drivers and required drivers. Google PDAnet application to get proper drivers without hassles ^_^
>Download >> androidxda . com/data/RootGenius . exe << latest version for English site, CH site(original) >> www . sjroot . com <<.
**STEPS**
#1
install the downloaded software and drivers on your computer (I used my old Windows XP SP2 PC)!!
*Root Genius (doesn't really required installation)
*ADB drivers or the PDAnet application
#2
run or open the Root Genius app.
*it will ask to connect your phone with "USB Debugging mode" enabled or checked via Settings > Developer Option.
#3
connect your phone and wait for app to detect your phone and then just click on the "Next" button on the bottom right corner of the app.
#4
watch your phone carefully and wait for the "green" progress bar to fill up, usually on 27% you will notice on your phone that Root Genius is working/doing the rooting it will flash at least twice.
#5
when you see the "Congratulation your phone is successfully rooted!" on your computer screen that's it!
#6
verifying root;
*disconnect your phone from PC and reboot the phone.
*look for the Kinguser app on your phone.
*use Root checker app found on the playstore.
*use any app that requires root access.
#7
That's all folks, hope I helped =))

Jin14Jin said:
Successfully rooted O+ 8.52!!
O+ 8.52 (Philippines) Specs
Android 4.1.1 Jelly Bean
4-inch WVGA (480×800) IPS Display
MT6577 1GHz dual-core processor
PowerVR SGX 531
512MB RAM
4GB internal memory
5-megapixel autofocus rear camera with LED flash
720p HD video recording
VGA front camera
3G, HSDPA, HSUPA
Wi-Fi, Wi-Fi hotspot
Bluetooth
microUSB v2.0
GPS, A-GPS
Dual SIM, Dual-Standby
Air Shuffle
1450mAh Li-Ion battery
**NOTE**
>Before rooting the phone unmount the SD-Card/External Storage.
>Un-check the "allow mock location" under Developers Option(where USB Debugging is located)
>Proper installation of ADB drivers and required drivers. Google PDAnet application to get proper drivers without hassles ^_^
>Download >> androidxda . com/data/RootGenius . exe << latest version for English site, CH site(original) >> www . sjroot . com <<.
**STEPS**
#1
install the downloaded software and drivers on your computer (I used my old Windows XP SP2 PC)!!
*Root Genius (doesn't really required installation)
*ADB drivers or the PDAnet application
#2
run or open the Root Genius app.
*it will ask to connect your phone with "USB Debugging mode" enabled or checked via Settings > Developer Option.
#3
connect your phone and wait for app to detect your phone and then just click on the "Next" button on the bottom right corner of the app.
#4
watch your phone carefully and wait for the "green" progress bar to fill up, usually on 27% you will notice on your phone that Root Genius is working/doing the rooting it will flash at least twice.
#5
when you see the "Congratulation your phone is successfully rooted!" on your computer screen that's it!
#6
verifying root;
*disconnect your phone from PC and reboot the phone.
*look for the Kinguser app on your phone.
*use Root checker app found on the playstore.
*use any app that requires root access.
#7
That's all folks, hope I helped =))
Click to expand...
Click to collapse
Sir im a newbie, is your post rooting tested? i want to root my oplus 8.52...

landyz64 said:
Sir im a newbie, is your post rooting tested? i want to root my oplus 8.52...
Click to expand...
Click to collapse
I missed your post... yup it is, nothing went wrong to my O+ 8.52 After i rooted it and changing the superuser app.

[Guide][Root] Cherry Mobile Fusion Breeze 2

Hello, for those looking on how to root your CHERRY MOBILE FUSION BREEZE 2, here it is guys!
Basic Specs:
4.4 KitKat OS
Dual COre 1.5 GHz
ROM 4GB
RAM 512MB
7" TFT Capacitive 5 point touch screen
Front VGA and rear 2MP camera
MIracast ready and up to 32GB sd card
Instructions:
Download and install your driver on your PC/Laptop HERE!
On your Tablet go to settings > developer options
Enable USB Debugging
Download & Install on your PC/Laptop Root Genius HERE!
Connect your tablet to your PC/Laptop
Run root genius and follow the on-screen instruction, and voila! you're rooted! :highfive:
To check if you're device is rooted download root checker @ PLAYSTORE
Special thanks to:
@droidiser (for the guide in installing the drivers on PC/Laptop)
Cherry Mobile Philippines
XDA Forum

ANSWERED PARTIALLY - MTK Droid Tools Problem

Hi!
Redmi Note 2 16GB / MIUI 16.6.7.0 (vendor custom ROM) + root / busybox 1.23.1-stericson / internal storage 9GB free, SD 31GB free
Win 8.1 / MtkDroidTools v2.5.3 / connected Redmi Note 2 (root shell)
I get --- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
Everywhere I look the following fixes are suggested:
- Install Busybox (check)
- Download MTK droid tools from a different source (check) (check) (check)
- Slot in an SD card with sufficient space into the phone (check)
- When prompted for Super User permissions on the phone and PC, select Ok or Grant (check)
Well, Im out. In addition start addresses under Blocks Map are different than addresses in downloaded MT6795_Android_scatter.txt (3 different sources, supposed to be for RN2). And also IMEI doesnt show in MTKDT phone information.
I would really appreciate some help.
Thank you
M
ANSWER :
Let me answer myself: MT6795 chipset is apparently not supported by MTK Droid Tools.
REMAINING QUESTION:
Difference between MT6795_Android_scatter.txt and Blocks Map I get in MTKDT.
Is that because of lack of support or is block map ROM specific?
I would really appreciate it.
M

Oh! I suppose MTK6735 is not supported as well? Damn, that tool needs updating, because there are a lot of new chips that are decent. I suppose MTK tools is only for 65xx chips. Damn! Thanks. So that's what the
TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64
Error means, not compatible?