I installed CM11 for my wonder(Clear installation) and flash gapps and then reboot my device. İt doesn't boot and reboot itself and then it entered into cwm itself. I used cm9,cm10,cm10.1 and cm10.2 but ı havent any problem like this. How can ı fix this problem? Help me please Thank you from now on.
[email protected] said:
I installed CM11 for my wonder(Clear installation) and flash gapps and then reboot my device. İt doesn't boot and reboot itself and then it entered into cwm itself. I used cm9,cm10,cm10.1 and cm10.2 but ı havent any problem like this. How can ı fix this problem? Help me please Thank you from now on.
Click to expand...
Click to collapse
what version of CWM do you have?
Trozzul said:
what version of CWM do you have?
Click to expand...
Click to collapse
İm using CWM 6.0.4.6 now.
Related
Hello!
I have a problem with my Nexus S (I'am newbie) I downloaded ROM Manager and install Kernel To ICS Android But i have JB (4.1.2)
I did not see that is meant for ICS and i install it.
When i install that Kernel he reboot and he is powering on but i wait hours waiting for it's turning on but it doesn't turn ON PLEASE HELP :crying::crying::crying::crying::crying::crying:
sawclOne said:
Hello!
I have a problem with my Nexus S (I'am newbie) I downloaded ROM Manager and install Kernel To ICS Android But i have JB (4.1.2)
I did not see that is meant for ICS and i install it.
When i install that Kernel he reboot and he is powering on but i wait hours waiting for it's turning on but it doesn't turn ON PLEASE HELP :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Is your phone Rooted?
Jrcon said:
Is your phone Rooted?
Click to expand...
Click to collapse
Yes my phone is rooted
Check this link out.
http://forum.xda-developers.com/showthread.php?t=1544940
....
Jrcon said:
Check this link out.
http://forum.xda-developers.com/showthread.php?t=1544940
Click to expand...
Click to collapse
Yes thank you but when i install that my phone will work right?
sawclOne said:
Yes thank you but when i install that my phone will work right?
Click to expand...
Click to collapse
Let me guess: no backup or anything?
if you have back up try restoring it from recovery...if you dont then reinstall the rom again from recovery.(wipe cashe data..system) should work just fine...at least is what i did in my nexus s..when i did this mistake..
Are your recovery and rom stock or custom? Cyanogenmod, CWM recovery etc...
If I were you, I would install CWM recovery for your phone and then install some custom rom, they are just awesome
Thx
Thank you all!!!
same problem
i have the same problem my phone just gets stuck with the google screen, but I already had cwm recovery installed but when I try to install cm9 or even cm7 its says that it cant open the package and the installation gets aborted. should Itry using the wug toolkit to flash the zips. and am i supposed to install sabra root toolkit on my phone...??? thanks.
Hello, I have one problem. I want to revert back to stock ROM. But everytime I turn on my phone, it stucks on HTC logo (not the quietly briliant... ). Thanks for help
Btw. I have not burnt nand and when I try to install another ROM it works :/
XTheMike said:
Hello, I have one problem. I want to revert back to stock ROM. But everytime I turn on my phone, it stucks on HTC logo (not the quietly briliant... ). Thanks for help
Btw. I have not burnt nand and when I try to install another ROM it works :/
Click to expand...
Click to collapse
what steps are you doing while flashing the stock rom
shubhojit89 said:
what steps are you doing while flashing the stock rom
Click to expand...
Click to collapse
Downloaded ROM
Rebooted to recovery (latest TWRP)
Wiped everything except sd-card
Flashed the rom
Rebooted
I waited for almost 20 min but nothing happened.
XTheMike said:
Downloaded ROM
Rebooted to recovery (latest TWRP)
Wiped everything except sd-card
Flashed the rom
Rebooted
I waited for almost 20 min but nothing happened.
Click to expand...
Click to collapse
The rom you are saying is stock?? Right??
Change the recovery and try..
Tried the Philz recovery but nothing happened. Should I try another one?
XTheMike said:
Tried the Philz recovery but nothing happened. Should I try another one?
Click to expand...
Click to collapse
try the recovery you installed after unlocking the bootloader.
shubhojit89 said:
try the recovery you installed after unlocking the bootloader.
Click to expand...
Click to collapse
I get the mobile rooted with unlocked bootloader But I know that there was CWM recovery. I installed it (from terminal emulator), but it's the same
XTheMike said:
I get the mobile rooted with unlocked bootloader But I know that there was CWM recovery. I installed it (from terminal emulator), but it's the same
Click to expand...
Click to collapse
Install recovery using adb not terminal emulator
shubhojit89 said:
Install recovery using adb not terminal emulator
Click to expand...
Click to collapse
Still not working... :/
But there is one weird thing in bootloader. When I boot to bootloader it shows: SD Checking...No image! (and some letters .img). This shows about 7 times and then it shows selection screen (fastboot/recovery/factory reset/simlock)
Second weird thing is that I have radio 1.10.80.14M3 (I'm from WestEurope), but in RUU isn't the same radio :/
(These things were there before I installed new recovery/stock ROM)
Now, I tried to install the stock rom by immortal yash and it works! So thank you for wasting a time with me
No problem
XTheMike said:
Now, I tried to install the stock rom by immortal yash and it works! So thank you for wasting a time with me
Click to expand...
Click to collapse
No problem mate.. Your problem is solved thats all..
try walkman sense 4 lite
smoothest sense 4 custom rom
Hello there! I just flashed ArchiDroid V2.3.4 in my Galaxy S III. When flashing ended I selected reboot now. But my phone only reboots in recovery mode (phiilz touch 4 CWM Base Version: 6.0.3.1). I tried to reboot my phone from the recovery mode but still the same problem. I tried to remove the battery and try again but still the same problem. Can you give me a solution to this cause I don't know what to do... Thanks!
aggokeh said:
Hello there! I just flashed ArchiDroid V2.3.4 in my Galaxy S III. When flashing ended I selected reboot now. But my phone only reboots in recovery mode (phiilz touch 4 CWM Base Version: 6.0.3.1). I tried to reboot my phone from the recovery mode but still the same problem. I tried to remove the battery and try again but still the same problem. Can you give me a solution to this cause I don't know what to do... Thanks!
Click to expand...
Click to collapse
did you do a full flash? i would try flashing the rom again.
Trozzul said:
did you do a full flash? i would try flashing the rom again.
Click to expand...
Click to collapse
yes i think i did a full flash.. i just followed the instruction given.. i flashed the rom again several times but i have the same problem. whenever i open the phone it's the recovery mode and not the casual start.
try flashing custom kernel or stock kernel for ur fon...hope this helps...
aggokeh said:
yes i think i did a full flash.. i just followed the instruction given.. i flashed the rom again several times but i have the same problem. whenever i open the phone it's the recovery mode and not the casual start.
Click to expand...
Click to collapse
maybe try another rom for now to at least get somewhere, is the rom your flashing a 4.4.2 rom?
Trozzul said:
maybe try another rom for now to at least get somewhere, is the rom your flashing a 4.4.2 rom?
Click to expand...
Click to collapse
its 4.4.. i will try to flash a custom rom and see what happens but i don't know if this is rom's fault or PhilZ Touch Recovery's fault
aggokeh said:
its 4.4.. i will try to flash a custom rom and see what happens but i don't know if this is rom's fault or PhilZ Touch Recovery's fault
Click to expand...
Click to collapse
i wanna say its the recovery because i think 4.4 roms are only flashing on CWM 6.0.4.3 i dont know what other recovery's require.
Trozzul said:
i wanna say its the recovery because i think 4.4 roms are only flashing on CWM 6.0.4.3 i dont know what other recovery's require.
Click to expand...
Click to collapse
the CWM version of this particular recovery is 6.0.3.1.. Is this a problem? and if it's recovery's problem what can i do about it? if i flash a stock rom the recovery will not be erased.
.
Trozzul said:
i wanna say its the recovery because i think 4.4 roms are only flashing on CWM 6.0.4.3 i dont know what other recovery's require.
Click to expand...
Click to collapse
and this particular recovery is recommended in the instruction of the ROM
aggokeh said:
and this particular recovery is recommended in the instruction of the ROM
Click to expand...
Click to collapse
hmmm well i dont know what to say to that but thats what i have heard with kit kat roms, i have looked on CWMs website and almost all of the galaxys s3s (discluding the s3 mini and international i think) have 6.0.4.X so i would try the specific one for you on Rom manager when you get a rom Working.
I Just installed HellKat 4.4 on my galaxy S3.
The only way this would work is to get my CWM to 6.0.4 just like Trozzul suggested.
The way I did it is to find ODIN pro/lite (MobileODINLite-v4.00.apk)
Then use that to install the CWM.img.
The HellKat 4.4 would not install with CWM 6.0.1
Hope this helps
Razor0 said:
I Just installed HellKat 4.4 on my galaxy S3.
The only way this would work is to get my CWM to 6.0.4 just like Trozzul suggested.
The way I did it is to find ODIN pro/lite (MobileODINLite-v4.00.apk)
Then use that to install the CWM.img.
The HellKat 4.4 would not install with CWM 6.0.1
Hope this helps
Click to expand...
Click to collapse
can he not just Flash a CWM.img in his recovery? or use rom manager to flash over it?
hi friends pls some one help me out ,,,
i am using TWRP Recovery v2.8.5.0 i am unable to install ROMS, how to change the TWRP to CWM,
i am unable to install anything through this TWRP, pls help me out with friends. :crying:
santhu/sonu said:
hi friends pls some one help me out ,,,
i am using TWRP Recovery v2.8.5.0 i am unable to install ROMS, how to change the TWRP to CWM,
i am unable to install anything through this TWRP, pls help me out with friends. :crying:
Click to expand...
Click to collapse
Just download the latest recovery for your device and flash it the same way you did with TWRP. (Could try a newer version of TWRP if available cwm or philz as well if there available)
A_Bunny said:
Just download the latest recovery for your device and flash it the same way you did with TWRP. (Could try a newer version of TWRP if available cwm or philz as well if there available)
Click to expand...
Click to collapse
but the current version which i am using know, i am unable to find the partition to install the file, at that what i have to do,,
santhu/sonu said:
but the current version which i am using know, i am unable to find the partition to install the file, at that what i have to do,,
Click to expand...
Click to collapse
What phone are you using? Also what exactly is the error?
A_Bunny said:
What phone are you using? Also what exactly is the error?
Click to expand...
Click to collapse
phone model LG P705, i am unable to install the NEW ROM or RECOVERY from this recovery, i am unable to find the partition when i am into recovery, thats the main error which i am getting :crying::crying:
santhu/sonu said:
phone model LG P705, i am unable to install the NEW ROM or RECOVERY from this recovery, i am unable to find the partition when i am into recovery, thats the main error which i am getting :crying::crying:
Click to expand...
Click to collapse
No you have to flash the other recovery though fastboot using your computer. Not though your current recovery.
A_Bunny said:
No you have to flash the other recovery though fastboot using your computer. Not though your current recovery.
Click to expand...
Click to collapse
thank u i have flashed through the fastboot, and its working know, thank u once again :fingers-crossed::angel:
santhu/sonu said:
thank u i have flashed through the fastboot, and its working know, thank u once again :fingers-crossed::angel:
Click to expand...
Click to collapse
hi bro, is there any lollipop 5.0 version for LG P705, pls let me know
Hi..
1_I can't reset my device to factory settings at all cost.. So what can i do for that??
2_when i flash gapps after flashing rom the errors such "Google play service has been stopped" and "setup wizard has been stopped" frequently appear..
What can i do for that too??
What recovery did you use?
newguyknowsnothing said:
What recovery did you use?
Click to expand...
Click to collapse
Cm recovery actually!!
Why dont you try twrp. I believe cwm and philz don't work well on Marshmallow. Try TWRP and see if it works
newguyknowsnothing said:
Why dont you try twrp. I believe cwm and philz don't work well on Marshmallow. Try TWRP and see if it works
Click to expand...
Click to collapse
How can i install that???... Does this method fix both of my problems or not??
$$john$$ said:
How can i install that???... Does this method fix both of my problems or not??
Click to expand...
Click to collapse
Install recovery installer http://forum.xda-developers.com/xperia-l/development/app-recoveries-recovery-installer-t3187915 , choose twrp. It may fix your issues
newguyknowsnothing said:
Install recovery installer http://forum.xda-developers.com/xperia-l/development/app-recoveries-recovery-installer-t3187915 , choose twrp. It may fix your issues
Click to expand...
Click to collapse
Ok... I'll try it... Thanks
same problem with mine eventhough i used twrp... i used open gapps pico..now when my phone starts i keeps giving me that error message