Hello!
I have a problem with my Nexus S (I'am newbie) I downloaded ROM Manager and install Kernel To ICS Android But i have JB (4.1.2)
I did not see that is meant for ICS and i install it.
When i install that Kernel he reboot and he is powering on but i wait hours waiting for it's turning on but it doesn't turn ON PLEASE HELP :crying::crying::crying::crying::crying::crying:
sawclOne said:
Hello!
I have a problem with my Nexus S (I'am newbie) I downloaded ROM Manager and install Kernel To ICS Android But i have JB (4.1.2)
I did not see that is meant for ICS and i install it.
When i install that Kernel he reboot and he is powering on but i wait hours waiting for it's turning on but it doesn't turn ON PLEASE HELP :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Is your phone Rooted?
Jrcon said:
Is your phone Rooted?
Click to expand...
Click to collapse
Yes my phone is rooted
Check this link out.
http://forum.xda-developers.com/showthread.php?t=1544940
....
Jrcon said:
Check this link out.
http://forum.xda-developers.com/showthread.php?t=1544940
Click to expand...
Click to collapse
Yes thank you but when i install that my phone will work right?
sawclOne said:
Yes thank you but when i install that my phone will work right?
Click to expand...
Click to collapse
Let me guess: no backup or anything?
if you have back up try restoring it from recovery...if you dont then reinstall the rom again from recovery.(wipe cashe data..system) should work just fine...at least is what i did in my nexus s..when i did this mistake..
Are your recovery and rom stock or custom? Cyanogenmod, CWM recovery etc...
If I were you, I would install CWM recovery for your phone and then install some custom rom, they are just awesome
Thx
Thank you all!!!
same problem
i have the same problem my phone just gets stuck with the google screen, but I already had cwm recovery installed but when I try to install cm9 or even cm7 its says that it cant open the package and the installation gets aborted. should Itry using the wug toolkit to flash the zips. and am i supposed to install sabra root toolkit on my phone...??? thanks.
Related
i am surely new at this but after some research over the internet i decided to install a custom recovery on my nexus s(jellybean 4.1.2)stock. after i downloaded "netarchy-nexus-1.3.7-cfs-2.3.4-signed" I went into recovery and installed it. but when i rebooted my phone it got stuck on the gppgle screen. please help, is it even fixable.:fingers-crossed::crying:
you just flashed a really outdated and unsupported kernel. flash a new one for stock jelly bean.
ej8989 said:
you just flashed a really outdated and unsupported kernel. flash a new one for stock jelly bean.
Click to expand...
Click to collapse
How to root nexus s i9023 step by step, cause i'm a newby. and link the utility that i'' use it.
thanks
abraham93 said:
How to root nexus s i9023 step by step, cause i'm a newby. and link the utility that i'' use it.
thanks
Click to expand...
Click to collapse
here: http://forum.xda-developers.com/showthread.php?p=33957041
After installing, do this then you're all set:
1. Click "Full Driver Installation Guide - Automatic + Manual" then follow the instructions carefully.
2. In step 2, choose and click "PdaNet Drivers"
3. Follow all instructions, then click "Full Driver Test", you'll see a success message if you did everything right.
4. Go back to main program window, then click "Unlock". Make sure to backup your device because this will wipe everything in it.
5. Tick the "Custom Recovery" box under Root menu then click "Root".
6. Done. Stand up and shout "YEAAAA!!!"
ej8989 said:
you just flashed a really outdated and unsupported kernel. flash a new one for stock jelly bean.
Click to expand...
Click to collapse
could you please send me a link for a good kernel or just the name of it.
naveen bailey said:
could you please send me a link for a good kernel or just the name of it.
Click to expand...
Click to collapse
If you're gonna stick to Stock 4.1.2 ROM, i recommend using either of these two:
_thalamus kernel: LINK (Reuploaded because thalamus removed it)
FloHimself Stock kernel: LINK (This has a few more features but still closer to stock. Can be activated via NSTools)
ej8989 said:
If you're gonna stick to Stock 4.1.2 ROM, i recommend using either of these two:
_thalamus kernel: LINK (Reuploaded because thalamus removed it)
FloHimself Stock kernel: LINK (This has a few more features but still closer to stock. Can be activated via NSTools)
Click to expand...
Click to collapse
tried both of them same result. wasnt able to install crespo kernel but was able to install the other one. i also tried to install matr1x.v24 but no use. also i wasnt able to install cm9 and cm7 earlier when everything was fine. dont know why
should i try and unroot the phone with wug toolkit using the soft bricked option. maybe that might help, and then install the kernels.:fingers-crossed:
naveen bailey said:
tried both of them same result. wasnt able to install crespo kernel but was able to install the other one. i also tried to install matr1x.v24 but no use. also i wasnt able to install cm9 and cm7 earlier when everything was fine. dont know why
should i try and unroot the phone with wug toolkit using the soft bricked option. maybe that might help, and then install the kernels.:fingers-crossed:
Click to expand...
Click to collapse
or should i try and deleting every **** there is on my phone like boot, system everything, and then flashing the rom and then the kernel.. what say..
naveen bailey said:
i am surely new at this but after some research over the internet i decided to install a custom recovery on my nexus s(jellybean 4.1.2)stock. after i downloaded "netarchy-nexus-1.3.7-cfs-2.3.4-signed" I went into recovery and installed it. but when i rebooted my phone it got stuck on the gppgle screen. please help, is it even fixable.:fingers-crossed::crying:
Click to expand...
Click to collapse
If you can still boot to recovery you can easily fix this.
Download any ROM
Reboot to recovery
In mount:
-format system
-format data
-format cache
-mount usb
Copy your ROM to your phone.
Safely dismount USB on your computer
Unmount USB
Flash the ROM you downloaded
Reboot
Enjoy.
Edit: actually, you need a kernel with support for stock, which i provide in my marmite thread.
http://forum.xda-developers.com/showthread.php?t=1719775
[GUIDE] Build a Kernel! + [KERNEL] marmite_v6.7 MTP
bedalus said:
If you can still boot to recovery you can easily fix this.
Download any ROM
Reboot to recovery
In mount:
-format system
-format data
-format cache
-mount usb
Copy your ROM to your phone.
Safely dismount USB on your computer
Unmount USB
Flash the ROM you downloaded
Reboot
Enjoy.
Edit: actually, you need a kernel with support for stock, which i provide in my marmite thread.
http://forum.xda-developers.com/showthread.php?t=1719775
[GUIDE] Build a Kernel! + [KERNEL] marmite_v6.7 MTP
Click to expand...
Click to collapse
tried to flash cm9 and cm7 a couple of times, didnt work. it says installation aborted due to package not found. now im really starting to freak out a lil bit
What device do you have?
also tried to install "miui_NS_1.12.16_d88b138851_4.0" didnt work cause installation aborted, cannot find package(bad). what to do now. but i really appreciated the efforts you guys have made.
Edit: actually, you need a kernel with support for stock, which i provide in my marmite thread.
http://forum.xda-developers.com/showthread.php?t=1719775
[GUIDE] Build a Kernel! + [KERNEL] marmite_v6.7 MTP[/QUOTE]
naveen bailey said:
i have a nexus s (jz054k),not sure whether it is I9023 or I9020 cause in settings it shows I9023 and in bootloader it shows I9020.also tried to install "miui_NS_1.12.16_d88b138851_4.0" didnt work cause installation aborted, cannot find package(bad). what to do now. but i really appreciated the efforts you guys have made.
Click to expand...
Click to collapse
naveen bailey said:
naveen bailey said:
i have a nexus s (jz054k),not sure whether it is I9023 or I9020 cause in settings it shows I9023 and in bootloader it shows I9020.also tried to install "miui_NS_1.12.16_d88b138851_4.0" didnt work cause installation aborted, cannot find package(bad). what to do now. but i really appreciated the efforts you guys have made.
Click to expand...
Click to collapse
it is i9023.
i9020 is google's general naming for all models of this phone.
should i try and unroot the phone with wug toolkit using the soft bricked option. maybe that might help, and then install the kernels
Click to expand...
Click to collapse
have you tried doing this?
Click to expand...
Click to collapse
ej8989 said:
naveen bailey said:
it is i9023.
i9020 is google's general naming for all models of this phone.
have you tried doing this?
Click to expand...
Click to collapse
no not yet, but am gonna do it. will let you know how it goes out thanks
Click to expand...
Click to collapse
ej8989 said:
naveen bailey said:
it is i9023.
i9020 is google's general naming for all models of this phone.
have you tried doing this?
Click to expand...
Click to collapse
unsuccesful...didnt work..
Click to expand...
Click to collapse
Do you see a padlock below google logo?
ej8989 said:
Do you see a padlock below google logo?
Click to expand...
Click to collapse
ya,its bootloader is unlocked..what should I do now..
Did this ever get resolved?
As I am currently running into the same problem.
Hi fellows !
I intalled cm10.1 v10k on my lg l7. But i didnt liked it so i installed the rooted version of v20A
But there is a problem. It worked great but after i restarted my phone it keeps rebooting in Clockworkmod recovery.
Please help me ! Ik neem my phone asap !
Greetz
bjornschuddings said:
Hi fellows !
I intalled cm10.1 v10k on my lg l7. But i didnt liked it so i installed the rooted version of v20A
But there is a problem. It worked great but after i restarted my phone it keeps rebooting in Clockworkmod recovery.
Please help me ! Ik neem my phone asap !
Greetz
Click to expand...
Click to collapse
I guess it coz of the wrong kernel for your current ROM. Try to flash kernel that's recommended for your current ROM. You can find that kernel inside the zip file. Good luck.
leonfirdaus said:
I guess it coz of the wrong kernel for your current ROM. Try to flash kernel that's recommended for your current ROM. You can find that kernel inside the zip file. Good luck.
Click to expand...
Click to collapse
btw i use the Gandalf kernel ? It worked great on the cm10.1. But i cant flas hthe zip file from cm10.1 anymore. Then i have an error in cwm
leonfirdaus said:
I guess it coz of the wrong kernel for your current ROM. Try to flash kernel that's recommended for your current ROM. You can find that kernel inside the zip file. Good luck.
bjornschuddings said:
btw i use the Gandalf kernel ? It worked great on the cm10.1. But i cant flas hthe zip file from cm10.1 anymore. Then i have an error in cwm
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Well, just try to do what I posted before. Flash Kernel inside CM10.1******.zip first and see what happen.
leonfirdaus said:
Well, just try to do what I posted before. Flash Kernel inside CM10.1******.zip first and see what happen.
Click to expand...
Click to collapse
Didn't worked. I still reboot in cwm. Maybe try to flash another cmw ? Becuase now i have an other cwm because i installed the v20a
bjornschuddings said:
Didn't worked. I still reboot in cwm. Maybe try to flash another cmw ? Becuase now i have an other cwm because i installed the v20a
Click to expand...
Click to collapse
Btw i tryed flashing V10k and v20A but kdz flasher cant find my phone. And i am in emergency mode
Hello, I have one problem. I want to revert back to stock ROM. But everytime I turn on my phone, it stucks on HTC logo (not the quietly briliant... ). Thanks for help
Btw. I have not burnt nand and when I try to install another ROM it works :/
XTheMike said:
Hello, I have one problem. I want to revert back to stock ROM. But everytime I turn on my phone, it stucks on HTC logo (not the quietly briliant... ). Thanks for help
Btw. I have not burnt nand and when I try to install another ROM it works :/
Click to expand...
Click to collapse
what steps are you doing while flashing the stock rom
shubhojit89 said:
what steps are you doing while flashing the stock rom
Click to expand...
Click to collapse
Downloaded ROM
Rebooted to recovery (latest TWRP)
Wiped everything except sd-card
Flashed the rom
Rebooted
I waited for almost 20 min but nothing happened.
XTheMike said:
Downloaded ROM
Rebooted to recovery (latest TWRP)
Wiped everything except sd-card
Flashed the rom
Rebooted
I waited for almost 20 min but nothing happened.
Click to expand...
Click to collapse
The rom you are saying is stock?? Right??
Change the recovery and try..
Tried the Philz recovery but nothing happened. Should I try another one?
XTheMike said:
Tried the Philz recovery but nothing happened. Should I try another one?
Click to expand...
Click to collapse
try the recovery you installed after unlocking the bootloader.
shubhojit89 said:
try the recovery you installed after unlocking the bootloader.
Click to expand...
Click to collapse
I get the mobile rooted with unlocked bootloader But I know that there was CWM recovery. I installed it (from terminal emulator), but it's the same
XTheMike said:
I get the mobile rooted with unlocked bootloader But I know that there was CWM recovery. I installed it (from terminal emulator), but it's the same
Click to expand...
Click to collapse
Install recovery using adb not terminal emulator
shubhojit89 said:
Install recovery using adb not terminal emulator
Click to expand...
Click to collapse
Still not working... :/
But there is one weird thing in bootloader. When I boot to bootloader it shows: SD Checking...No image! (and some letters .img). This shows about 7 times and then it shows selection screen (fastboot/recovery/factory reset/simlock)
Second weird thing is that I have radio 1.10.80.14M3 (I'm from WestEurope), but in RUU isn't the same radio :/
(These things were there before I installed new recovery/stock ROM)
Now, I tried to install the stock rom by immortal yash and it works! So thank you for wasting a time with me
No problem
XTheMike said:
Now, I tried to install the stock rom by immortal yash and it works! So thank you for wasting a time with me
Click to expand...
Click to collapse
No problem mate.. Your problem is solved thats all..
try walkman sense 4 lite
smoothest sense 4 custom rom
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk
CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?
matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.
CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!
Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps
Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)
you need to wipe it 1st before flashing CM11 and Gapps...
Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS
Hi,today I received a message telling me update saying that the update 4.4.4 update was available.So I download and I install. The phone turns off, turn back on CWM(ClockworkMod),it marks me ''Intall untrusted Package ?''so I made ''Yes , Install untrusted zip".After he told me "Root access possibly lost.Fix?" So I did "Yes , fix root (/system/xbin/su).Then the phone restarts when I get on the menu welcomes 30 sec after it starts,he reboot and it started on the CWM and rest the same question as above and it started on the CWM and rest the same question as above ( ''Intall untrusted Package ?'')i do and again for 20 min. I decided to stop the phone and reset my phone because its breaking my head.
Is what aurrait a kind soul to help me?
thank you
PS:I have root my moto g before the updates and when I unroot (I unroot with SuperSu) I always those problem
Sorry for my bad english :angel:
You're lucky that you got update. That's odd error.
What's your location? None else has received update yet. Try factory resetting or flash stock ROM.
VAMGDroidFan said:
You're lucky that you got update. That's odd error.
What's your location? None else has received update yet. Try factory resetting or flash stock ROM.
Click to expand...
Click to collapse
My location is in France, I did 2 reset (power +vol down) and i have the same problem.What is flash stock ROM and how do you are ?
newman71200 said:
My location is in France, I did 2 reset (power +vol down) and i have the same problem.What is flash stock ROM and how do you are ?
Click to expand...
Click to collapse
That's nice. Read this link.
VAMGDroidFan said:
That's nice. Read this link.
Click to expand...
Click to collapse
But if I install the stock rom, CWM will you it replaced by stock recovery? (because I think the problem comes from CWM for update)
newman71200 said:
But if I install the stock rom, CWM will you it replaced by stock recovery? (because I think the problem comes from CWM for update)
Click to expand...
Click to collapse
yeah, cwm will be replaced with stock recovery as you are restoring stock firmware
bublz654 said:
yeah, cwm will be replaced with stock recovery as you are restoring stock firmware
Click to expand...
Click to collapse
Can I installs the recovery only via fastboot ?
Yes you can flash CWM via fastboot, but you need to do steps again to be able to flash it.
VAMGDroidFan said:
Yes you can flash CWM via fastboot, but you need to do steps again to be able to flash it.
Click to expand...
Click to collapse
How?
Please read FAQ.
VAMGDroidFan said:
Please read FAQ.
Click to expand...
Click to collapse
I managed to install the stock rom and install the update (4.4.4)
thank you very much