i am surely new at this but after some research over the internet i decided to install a custom recovery on my nexus s(jellybean 4.1.2)stock. after i downloaded "netarchy-nexus-1.3.7-cfs-2.3.4-signed" I went into recovery and installed it. but when i rebooted my phone it got stuck on the gppgle screen. please help, is it even fixable.:fingers-crossed::crying:
you just flashed a really outdated and unsupported kernel. flash a new one for stock jelly bean.
ej8989 said:
you just flashed a really outdated and unsupported kernel. flash a new one for stock jelly bean.
Click to expand...
Click to collapse
How to root nexus s i9023 step by step, cause i'm a newby. and link the utility that i'' use it.
thanks
abraham93 said:
How to root nexus s i9023 step by step, cause i'm a newby. and link the utility that i'' use it.
thanks
Click to expand...
Click to collapse
here: http://forum.xda-developers.com/showthread.php?p=33957041
After installing, do this then you're all set:
1. Click "Full Driver Installation Guide - Automatic + Manual" then follow the instructions carefully.
2. In step 2, choose and click "PdaNet Drivers"
3. Follow all instructions, then click "Full Driver Test", you'll see a success message if you did everything right.
4. Go back to main program window, then click "Unlock". Make sure to backup your device because this will wipe everything in it.
5. Tick the "Custom Recovery" box under Root menu then click "Root".
6. Done. Stand up and shout "YEAAAA!!!"
ej8989 said:
you just flashed a really outdated and unsupported kernel. flash a new one for stock jelly bean.
Click to expand...
Click to collapse
could you please send me a link for a good kernel or just the name of it.
naveen bailey said:
could you please send me a link for a good kernel or just the name of it.
Click to expand...
Click to collapse
If you're gonna stick to Stock 4.1.2 ROM, i recommend using either of these two:
_thalamus kernel: LINK (Reuploaded because thalamus removed it)
FloHimself Stock kernel: LINK (This has a few more features but still closer to stock. Can be activated via NSTools)
ej8989 said:
If you're gonna stick to Stock 4.1.2 ROM, i recommend using either of these two:
_thalamus kernel: LINK (Reuploaded because thalamus removed it)
FloHimself Stock kernel: LINK (This has a few more features but still closer to stock. Can be activated via NSTools)
Click to expand...
Click to collapse
tried both of them same result. wasnt able to install crespo kernel but was able to install the other one. i also tried to install matr1x.v24 but no use. also i wasnt able to install cm9 and cm7 earlier when everything was fine. dont know why
should i try and unroot the phone with wug toolkit using the soft bricked option. maybe that might help, and then install the kernels.:fingers-crossed:
naveen bailey said:
tried both of them same result. wasnt able to install crespo kernel but was able to install the other one. i also tried to install matr1x.v24 but no use. also i wasnt able to install cm9 and cm7 earlier when everything was fine. dont know why
should i try and unroot the phone with wug toolkit using the soft bricked option. maybe that might help, and then install the kernels.:fingers-crossed:
Click to expand...
Click to collapse
or should i try and deleting every **** there is on my phone like boot, system everything, and then flashing the rom and then the kernel.. what say..
naveen bailey said:
i am surely new at this but after some research over the internet i decided to install a custom recovery on my nexus s(jellybean 4.1.2)stock. after i downloaded "netarchy-nexus-1.3.7-cfs-2.3.4-signed" I went into recovery and installed it. but when i rebooted my phone it got stuck on the gppgle screen. please help, is it even fixable.:fingers-crossed::crying:
Click to expand...
Click to collapse
If you can still boot to recovery you can easily fix this.
Download any ROM
Reboot to recovery
In mount:
-format system
-format data
-format cache
-mount usb
Copy your ROM to your phone.
Safely dismount USB on your computer
Unmount USB
Flash the ROM you downloaded
Reboot
Enjoy.
Edit: actually, you need a kernel with support for stock, which i provide in my marmite thread.
http://forum.xda-developers.com/showthread.php?t=1719775
[GUIDE] Build a Kernel! + [KERNEL] marmite_v6.7 MTP
bedalus said:
If you can still boot to recovery you can easily fix this.
Download any ROM
Reboot to recovery
In mount:
-format system
-format data
-format cache
-mount usb
Copy your ROM to your phone.
Safely dismount USB on your computer
Unmount USB
Flash the ROM you downloaded
Reboot
Enjoy.
Edit: actually, you need a kernel with support for stock, which i provide in my marmite thread.
http://forum.xda-developers.com/showthread.php?t=1719775
[GUIDE] Build a Kernel! + [KERNEL] marmite_v6.7 MTP
Click to expand...
Click to collapse
tried to flash cm9 and cm7 a couple of times, didnt work. it says installation aborted due to package not found. now im really starting to freak out a lil bit
What device do you have?
also tried to install "miui_NS_1.12.16_d88b138851_4.0" didnt work cause installation aborted, cannot find package(bad). what to do now. but i really appreciated the efforts you guys have made.
Edit: actually, you need a kernel with support for stock, which i provide in my marmite thread.
http://forum.xda-developers.com/showthread.php?t=1719775
[GUIDE] Build a Kernel! + [KERNEL] marmite_v6.7 MTP[/QUOTE]
naveen bailey said:
i have a nexus s (jz054k),not sure whether it is I9023 or I9020 cause in settings it shows I9023 and in bootloader it shows I9020.also tried to install "miui_NS_1.12.16_d88b138851_4.0" didnt work cause installation aborted, cannot find package(bad). what to do now. but i really appreciated the efforts you guys have made.
Click to expand...
Click to collapse
naveen bailey said:
naveen bailey said:
i have a nexus s (jz054k),not sure whether it is I9023 or I9020 cause in settings it shows I9023 and in bootloader it shows I9020.also tried to install "miui_NS_1.12.16_d88b138851_4.0" didnt work cause installation aborted, cannot find package(bad). what to do now. but i really appreciated the efforts you guys have made.
Click to expand...
Click to collapse
it is i9023.
i9020 is google's general naming for all models of this phone.
should i try and unroot the phone with wug toolkit using the soft bricked option. maybe that might help, and then install the kernels
Click to expand...
Click to collapse
have you tried doing this?
Click to expand...
Click to collapse
ej8989 said:
naveen bailey said:
it is i9023.
i9020 is google's general naming for all models of this phone.
have you tried doing this?
Click to expand...
Click to collapse
no not yet, but am gonna do it. will let you know how it goes out thanks
Click to expand...
Click to collapse
ej8989 said:
naveen bailey said:
it is i9023.
i9020 is google's general naming for all models of this phone.
have you tried doing this?
Click to expand...
Click to collapse
unsuccesful...didnt work..
Click to expand...
Click to collapse
Do you see a padlock below google logo?
ej8989 said:
Do you see a padlock below google logo?
Click to expand...
Click to collapse
ya,its bootloader is unlocked..what should I do now..
Did this ever get resolved?
As I am currently running into the same problem.
Related
any question is in here right? haha
What version of CWM recovery is in this? Maybe raver or someone who's flashed this can tell me.
Sent from my SGH-T959V
It uses TWRP as the thread title states.
Nice work Raver!
For those not familiar with the Aroma installer, there are some good options in the "Advanced" screen. For example, I don't know if Audiophile ICS preserves /data by default when flashing. Aroma lets you back it up during the install process.
If you have a modem that you prefer to the KJ6 modem that is bundled with this ROM, you may want to use the Advanced settings to disable the modem flash.
Additionally, TWRP will let you stack zips, so you can, for example, flash in one pass:
ROM
gapps
Your own modifications in a zip
Kudos to Raver for not packaging gapps and obeying the licensing requirements imposed by Google.
hi i just got this phone im coming from a samsung admire i have cwm installed on my galaxy s 4g how do i get twrp installed to flash this rom thanks in advance
dragon5944 said:
hi i just got this phone im coming from a samsung admire i have cwm installed on my galaxy s 4g how do i get twrp installed to flash this rom thanks in advance
Click to expand...
Click to collapse
Just install the rom zip. It will install twrp for you.
thanks for the quick responce do i need to wipe anything or just install
Amazing work raver. This is my favorite rom to date so far. It is running flawlessly for me. You once again have outdone yourself.
dragon5944 said:
thanks for the quick responce do i need to wipe anything or just install
Click to expand...
Click to collapse
you can just install if you want to keep anything do the custom install and then click backup data/restore data so it keeps your files in tact ... it will auto format system data cache for you
you will need to download a gapps package do to the fact i cannot include it in the rom itself i dont have a link for one but i think there is one floating around here.
ok i went to install the rom and my phone just resets
check md5 of your download if it matches try a reflash.
ok how do i do that im not used to flashing this phone yet my admire was easy to flash
http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
dragon5944 said:
ok how do i do that im not used to flashing this phone yet my admire was easy to flash
Click to expand...
Click to collapse
reboot to cwm scroll down to flash zip from sd card choose the zip file click flash it will load aroma installer follow on screen prompts flash reboot profit ;P
got it love the rom but i dont have the play store app did i do something wrong
dragon5944 said:
got it love the rom but i dont have the play store app did i do something wrong
Click to expand...
Click to collapse
no u need the gapps pack u can get it from the link above my post.. just grab gapps for cm9 on that page and reboot recovery flash the gapps pack u downloaded and put on ur card reboot let it go from there
thanks for all the help i love this rom
dragon5944 said:
thanks for all the help i love this rom
Click to expand...
Click to collapse
yvw
Definitely a fun ROM!
I just noticed that Droid48 doesn't scale well to the "mini-tablet" format, but that is likely an app problem, not a ROM problem. Still totally usable, just funny to see the little calculator buttons and labels.
SuperUser didn't update properly for me through Play -- I'll see if I can reproduce later on.
Hello!
I have a problem with my Nexus S (I'am newbie) I downloaded ROM Manager and install Kernel To ICS Android But i have JB (4.1.2)
I did not see that is meant for ICS and i install it.
When i install that Kernel he reboot and he is powering on but i wait hours waiting for it's turning on but it doesn't turn ON PLEASE HELP :crying::crying::crying::crying::crying::crying:
sawclOne said:
Hello!
I have a problem with my Nexus S (I'am newbie) I downloaded ROM Manager and install Kernel To ICS Android But i have JB (4.1.2)
I did not see that is meant for ICS and i install it.
When i install that Kernel he reboot and he is powering on but i wait hours waiting for it's turning on but it doesn't turn ON PLEASE HELP :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Is your phone Rooted?
Jrcon said:
Is your phone Rooted?
Click to expand...
Click to collapse
Yes my phone is rooted
Check this link out.
http://forum.xda-developers.com/showthread.php?t=1544940
....
Jrcon said:
Check this link out.
http://forum.xda-developers.com/showthread.php?t=1544940
Click to expand...
Click to collapse
Yes thank you but when i install that my phone will work right?
sawclOne said:
Yes thank you but when i install that my phone will work right?
Click to expand...
Click to collapse
Let me guess: no backup or anything?
if you have back up try restoring it from recovery...if you dont then reinstall the rom again from recovery.(wipe cashe data..system) should work just fine...at least is what i did in my nexus s..when i did this mistake..
Are your recovery and rom stock or custom? Cyanogenmod, CWM recovery etc...
If I were you, I would install CWM recovery for your phone and then install some custom rom, they are just awesome
Thx
Thank you all!!!
same problem
i have the same problem my phone just gets stuck with the google screen, but I already had cwm recovery installed but when I try to install cm9 or even cm7 its says that it cant open the package and the installation gets aborted. should Itry using the wug toolkit to flash the zips. and am i supposed to install sabra root toolkit on my phone...??? thanks.
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk
CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?
matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.
CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!
Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps
Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)
you need to wipe it 1st before flashing CM11 and Gapps...
Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS
Hi , wonder any can point out what have i done wrong?
currenty on hboot 2.00.2002 with Soff and htc dev unlocked.
i can install cyanogen mod7 without any problem.
but the cm11, cm10.1 or mokee all doesnt work.
i can install them in 4ext without error and then flashed the boot.img via fast boot but every time when i reboot it just stuck loding screen.
and i followed the step factory reset, wipe cache dalvik, install rom then boot.img
if anyone can get little help would be nice
ctxprince said:
Hi , wonder any can point out what have i done wrong?
currenty on hboot 2.00.2002 with Soff and htc dev unlocked.
i can install cyanogen mod7 without any problem.
but the cm11, cm10.1 or mokee all doesnt work.
i can install them in 4ext without error and then flashed the boot.img via fast boot but every time when i reboot it just stuck loding screen.
and i followed the step factory reset, wipe cache dalvik, install rom then boot.img
if anyone can get little help would be nice
Click to expand...
Click to collapse
What version of 4ext do u have? For latest kk roms u need 4ext v1.0.0.6
jmcclue said:
What version of 4ext do u have? For latest kk roms u need 4ext v1.0.0.6
Click to expand...
Click to collapse
thanks for very quick reply.
yes i think i have the latest 4ext.
i was on the wrong one thou, i keep getting the error msgs some changes failed. then i saw your reply to other guys then i searched guides and now i can install without errors.
but still stuck on boot screen. :laugh:
hi just checked version 1.0.0.6 rc1
ctxprince said:
thanks for very quick reply.
yes i think i have the latest 4ext.
i was on the wrong one thou, i keep getting the error msgs some changes failed. then i saw your reply to other guys then i searched guides and now i can install without errors.
but still stuck on boot screen. :laugh:
hi just checked version 1.0.0.6 rc1
Click to expand...
Click to collapse
If u look in desire s general, theres a thread for non-sony panels, have a read at that.
jmcclue said:
If u look in desire s general, theres a thread for non-sony panels, have a read at that.
Click to expand...
Click to collapse
wow you are ace!
I follow the emulator thing and my dont have sony in it eek:
i always tried to stay away from flash radio and kernel stuff people told me those likely brick phones if done wrongly.
guess i have to do this time now.
so for the kernel it is mentioned in that thread:
""For Android 4.0.x & 4.1.x, use this link
--> http://forum.xda-developers.com/atta...2&d=1354294206 <--
For Android 4.2.x, use this link
--> http://tool.anzow.com/Software/tool/...ddi_291212.zip <--
For MIUI v5, use this link
--> http://yadi.sk/d/JZ_4DS4w3t98s <--
which i should i choose if i want to use the CM11 ROM?
or does the kernel is hardware specific that i have to found out more about my phone?
Thanks for your time!
ctxprince said:
wow you are ace!
I follow the emulator thing and my dont have sony in it eek:
i always tried to stay away from flash radio and kernel stuff people told me those likely brick phones if done wrongly.
guess i have to do this time now.
so for the kernel it is mentioned in that thread:
""For Android 4.0.x & 4.1.x, use this link
--> http://forum.xda-developers.com/atta...2&d=1354294206 <--
For Android 4.2.x, use this link
--> http://tool.anzow.com/Software/tool/...ddi_291212.zip <--
For MIUI v5, use this link
--> http://yadi.sk/d/JZ_4DS4w3t98s <--
which i should i choose if i want to use the CM11 ROM?
or does the kernel is hardware specific that i have to found out more about my phone?
Thanks for your time!
Click to expand...
Click to collapse
Don't think any of them would work with 4.4. You'll have to stick with Jellybean
What is the proper way to install the note rom on my galaxy j7t im having problems do i root my phone first or when i flash the rom will it root it since it has supersu on it i get stuck on the booting part the note 7 comes up but thats it it keeps flashing then it goes to a black screen and nothing happens please help me out if anyone can thanks :crying::crying::crying:
Ctrterrell said:
What is the proper way to install the note rom on my galaxy j7t im having problems do i root my phone first or when i flash the rom will it root it since it has supersu on it i get stuck on the booting part the note 7 comes up but thats it it keeps flashing then it goes to a black screen and nothing happens please help me out if anyone can thanks :crying::crying::crying:
Click to expand...
Click to collapse
Flash the rom in TWRP then before exiting TWRP flash Messi's permissive kernel. It takes about 10 minutes to boot and some features won't work (wifi, hot-spot, camera and VOLTE). Hope this helps.
Metabolic12 said:
Flash the rom in TWRP then before exiting TWRP flash Messi's permissive kernel. It takes about 10 minutes to boot and some features won't work (wifi, hot-spot, camera and VOLTE). Hope this helps.
Click to expand...
Click to collapse
Dang no WiFi so if I wanna install version 2 do you know if these features still won't work or would I even have to flash the kernel for the note rom version 2
Ctrterrell said:
Dang no WiFi so if I wanna install version 2 do you know if these features still won't work or would I even have to flash the kernel for the note rom version 2
Click to expand...
Click to collapse
I've gotten version 2 and 3 to boot on my J7, but the same issues showed in both releases. And yes you have to flash the kernel. Slight differences in the J700F/M/H and our T variant. This is why the Enigma Rom and CM13 (or any other kernel specific build) will never flash and boot without some internal tweaking.
Metabolic12 said:
I've gotten version 2 and 3 to boot on my J7, but the same issues showed in both releases. And yes you have to flash the kernel. Slight differences in the J700F/M/G and our T variant. This is why the Enigma Rom and CM13 (or any other kernel specific build) will never flash and boot without some internal tweaking.
Click to expand...
Click to collapse
OK thanks for your help ima try it now and see what happens and let you know
Ctrterrell said:
OK thanks for your help ima try it now and see what happens and let you know
Click to expand...
Click to collapse
Make a Nandroid before you flash it, just to be safe. If it works just hit the thanks button bro, good luck.
Metabolic12 said:
Make a Nandroid before you flash it, just to be safe. If it works just hit the thanks button bro, good luck.
Click to expand...
Click to collapse
Well I tried I installed the rom then tried to flash the kernel like how you said and it said fail
Ctrterrell said:
Well I tried I installed the rom then tried to flash the kernel like how you said and it said fail
Click to expand...
Click to collapse
Give me your step by step and I'll see if I can help you.
Well I wipe the data system and cache before I installed the rom then afterwards I installed it then I flashed the kernel and it said something bout permission was removed since it couldn't be installed but I will take a pic from my tablet real fast to show you what I was talking about
Metabolic12 said:
Give me your step by step and I'll see if I can help you.
Click to expand...
Click to collapse
This
I forgot to use Odin lol mybad
Ctrterrell said:
This
Click to expand...
Click to collapse
Try this. Take your external SD card and put it in your tablet. Go to Messi's thread for the max kernel in J7T development and download the boot.img not the boot.tar.md5. Finish the download then extract the zip in your external SD card. Put your SD card in your phone, boot into TWRP. Now mount system, cache, art/dalvik, data and internal storage (you may need to format data to access data) now wipe them. Don't wipe your external SD card, so make sure it's not mounted in TWRP. After the wipe mount your external SD, flash the rom, then flash boot.img and tick Boot not recovery before the flash. Reboot and wait. Let me know if it helped man.
---------- Post added at 08:39 PM ---------- Previous post was at 08:19 PM ----------
Ctrterrell said:
I forgot to use Odin lol mybad
Click to expand...
Click to collapse
If you download the boot.img you won't need Odin. But I prefer flashing tars personally, your choice. It should boot for you bro.
Hey thanks bro I finally got it I figured out what I was doing wrong I never flashed the boot img and is the wifi not working on V2
Ctrterrell said:
Hey thanks bro I finally got it I figured out what I was doing wrong I never flashed the boot img and is the wifi not working on V2
Click to expand...
Click to collapse
Glad you got it bro and no the Wi-Fi doesn't work on any of the 3 versions.
Yeah thanks for everu8amd what else roms have you tried and will I have to always flash that kernel when I try to install a roms on this phone or was that only for the note roms
Wi-Fi fix , you just need to get the files from the stock ROM in system,etc. And delete all the files in note 7 folder and put the ones you copy from the stock ROM in that same folder you just delete the Wi-Fi files out of
And Reboot I reboot to recovery and advance wipe click dalvic and cliche
mario1634 said:
Wi-Fi fix , you just need to get the files from the stock ROM in system,etc. And delete all the files in note 7 folder and put the ones you copy from the stock ROM in that same folder you just delete the Wi-Fi files out of
Click to expand...
Click to collapse
Ok ima give it a try In few and see what happens
Have anybody figure out a fix for the camera
mario1634 said:
Have anybody figure out a fix for the camera
Click to expand...
Click to collapse
That's what I was about to ask next I know I was still having problems even when I tried to send a pic it still Would reboot
I'm trying to figure it out now if I get it working I will tell you I get it to stop reboot ever time and now it just force close