Related
Hey all, I just noticed that the official Powermat back battery door for the MT4GS is on sale at T-Mobile for ten bucks. You'll still need the actual Powermat charger, which goes for $20-30 online. The website also charges shipping and sales tax, FYI. But still a good price:
http://www.t-mobile.com/shop/addons/accessories/default.aspx?categorycode=898#tblId10
great find, is it only in black?
These are highly worth the money, it charges the phone much faster and is nice to not "plug" my phone in..
Got one for xmas and works amazing..
Sent from my myTouch_4G_Slide using Tapatalk
shady503403 said:
These are highly worth the money, it charges the phone much faster and is nice to not "plug" my phone in..
Got one for xmas and works amazing..
Sent from my myTouch_4G_Slide using Tapatalk
Click to expand...
Click to collapse
my battery door just **** the bed, so this is a godsend!
Case that fits?
I just got the PowerMat and battery door when I upgraded on Saturday. I love it, but I can't find a case that will fit over the slighty larger than normal battery door. Has anyone else had luck finding something that works?
Where's the best place to get a single position mat? Best price?
rorytmeadows said:
Where's the best place to get a single position mat? Best price?
Click to expand...
Click to collapse
I looked around Amazon a little bit and saw plenty of single-position mats for a particular device, usually including the receiver door for that device, for under $10. (You know, for a device that you don't have. ) Here is one example (for BlackBerry Bold 9700): http://www.amazon.com/Powermat-Position-Charging-BlackBerry-Receiver/dp/B00462QB4C
It looks like these mats have a custom indentation to hug the back of the device, so it's unlikely to be a perfect fit. Also, if you device doesn't fit into the indentation, it might not charge.
But ... cheap! Most of these are not Amazon Prime eligible, so it costs another few bucks for shipping.
---------- Post added at 10:48 AM ---------- Previous post was at 10:41 AM ----------
I'm sort of inspired by this thread to try hacking some powermat chargers for some other phones where the receiver is still expensive or there just isn't a receiver. If you search around, you can find some reports of folks who have done this with varying degrees of aesthetic sensibility in the results.
One idea, that I kind of like a lot, is to use the Palm Pre charging "Touchstone" as the transmitting mat. Because the Palm Pre was kind of a dud in the marketplace, the Touchstones are available for pretty cheap. Here's an example at Amazon for under $5, including shipping: http://www.amazon.com/Palm-Touchstone-Charging-Dock-Pre/dp/B002CMEIWK. One hitch with the Touchstone is that it uses a couple of magnetic thingies to activate it (and, I guess, hold the device in place). I'm sure one could deal with that somehow.
Thanks for the last post.
Alright, I'm totally confused. I took a look on Amazon earlier this week, but without confidence in the mat actually working with the device perfectly, I decided to check out what was in stores.
I go to Best Buy and couldn't find them. I asked an associate and they said that they no longer are carrying PowerMats because of the shorting out risk.
Ummmmmmm, okay....
I go to Radio Shack and the associate there starts talking to me about two different types and how one doesn't charge fully all the time and that kills your battery over time and the other involves walking around with a "puck" on your phone.
What the hell is everyone talking about??? I thought these were pretty good and I'm reading nothing but nice reviews online, with the exception of the expense. Frankly, at $10 plus shipping for the case, I no longer care about the expense.
Thoughts????
I don't know anything definitive about most of that. From poking around today, I've deduced a few things (none of which involved "shorting out" ).
Powermat and Duracell both made something that looked like roughly the same technology. Some time in the recent past, Powermat and Proctor and Gamble (who I guess own the Duracell brand?) formed a joint venture or some marketing agreement to make and sell "Duracell Powermat" devices.
The mention of a puck thing could mean either of two things. First, Powermat sells a "universal" receiver, which is a little block with the inductor coil inside it. You still have to connect it to your phone's charger port via mini/micro USB (or one of their other tips). Of course, you wouldn't have that on all the time, except when you are charging. Second, Duracell sells or used to sell a gadget that semi-permanently plugs into your USB port and then sticks to the back of your phone. The latter sounds like what the RS guy was talking about.
After a couple days out of town, I returned to find a bunch of packages of el cheapo Powermat stuff for experiments.
I got a single-position mat specially intended for iPhone 3G and 3GS from a 3rd party supplier on Amazon for $7.44 (and free shipping due to Amazon Prime). With the MT4GS Powermat receiver cover from T-Mobile, I can charge using this mat. It's not a perfect fit. The mat does have an indentation, but it's not for the iPhone. The included iPhone case has a rectangular hump on the back, and the indentation is for that hump. Still, by wiggling things a bit and placing the MT4GS off-center, it does charge. The MT4GS cover does not have that hump ... it's just slightly thicker than standard overall.
From the feel of things, there must be magnets that activate the mat. So, I had to fiddle with the placement of the phone to get the mat to turn on. Once it did, the charging light came on for the phone.
(I haven't taken any of this apart yet, so I'm speculating a little.)
On spec, I bought a Palm Pre Touchstone charging kit. They are pretty cool looking and are available pretty cheaply. (Mine cost less than $10, and I've now seen them for $4.) Alas, the kit include the charging dock (which I hope turns out to be compatible with Powermat) and a receiver cover for the Palm Pre (yawn), but it turns out that it wants to reuse the power cord from the original Palm Pre charger.
It looks like it's a mini USB connector (though it could be micro USB), but it fits into a pretty cramped tunnel in the charging dock. None of the USB cords I have on hand will fit all the way into that tunnel.
So, that's a bit of a bust, but I reckon I might buy a Palm Pre power supply since they are also pretty cheap. The looks of the Touchstone are so cool, I hope I can get it working with my MT4GS.
Anyone interested in one or two of these?
Sorry to Necro this thread but has anyone gotten this door to work with Qi chargers? I suppose it won't work out of the box but I can imagine switching out the coil with one for like a SGS3 or some such.
Greetings!
Like many of you (or so I've read) I was on the hunt for some way to get my AT&T G3 to support Qi charging. It all seemed hopeless. I believe I have solved the problem with the least amount of 'hassle' and the least amount of loss of functionality of the phone as possible (its cheap too!). You also don't even need to open your phone up.
I have Qi chargers all over the place already from my last phone, so Qi was crucial to adopting the G3 and not swapping it for something else (AT&T had a great deal and it was free on a new phone line).
I found a gadget that basically has 1 downside, that being, that it consumes your USB port. For me that's not a huge deal because I never plug my phone into anything other than a charger, and with Qi, no need. I've seen people talk about it on here before, but couldn't find any cases where someone bought one.
( sorry, I don't post enough, can't do posts with links )
The device is here: Search on Amazon for B00H7FJX7M
$9.96 at the moment.
HOWEVER, there is a BIG DOWNSIDE at first! If you put the Qi receiver inside your phone behind the outer shell, the existing NFC antenna squashes the signal and it won't charge.
I have a Spigen case for the G3 like my Nexus5 (great cases IMHO), so I said "well what if I just leave the cover off", so I did, and put the Spigen case back on. It worked. At first I was going to leave it, since it still fit fine in the case like that. I thought more about it though and realized dust and other badness would get into the phone if I did that.
So I wondered if I just put the wireless antenna OUTSIDE of the phone, so between the Spigen case and the phone itself, run the USB cable down to the USB port, tape it in place so it doesn't move around...
It totally worked. So no need to even open the phone. Just plug this thing into the USB port, line it up well inside the back of a case/cover, tape it down with some heat resistant tape, and put your case on.
With the Spigen case you can barely even see it, and it certainly does not protrude beyond the border of the case. Even without the Spigen case on with this thing, the extra plastic sticking out is very minimal and hardly noticeable.
I was pretty happy with this at that point, and left it alone.. But then I wondered, does NFC still work? Its being blocked now by the Qi module, AND the Spigen case.. I wonder...
NFC works fine still too.
Cost:
$10 for the module
$20 for the Spigen case
0% hardware modification
Loss of functionality:
- Requires a case, so added weight/bulk
- USB port is not usable for anything else, though can be pulled out relatively easily when necessary without taking anything apart.
Sorry for the length, I tend to be a windbag.
( sorry, I don't post enough, can't do posts with links )
The Module: Search on Amazon for B00H7FJX7M
The Case: Search on Amazon for B00JQI2USW
My PMA coil works just fine with my d850. I bought my coil for 20$ and installed it on backplate.... I need my USB port. Seen this the other day. Att shiykd have used qi to begin with.
2SHAYNEZ
Sadly moving to PMA wasn't an option for me simply because I have other Qi devices still, and didn't want to spend the money on a bunch of new chargers.
Just figured I would share what i found in case someone else or there was in a similar situation as me and didn't mind the loss of the usb port (though again, it's pretty easy to unplug temporarily).
Good find I forgot to share what you found... YouTube has a video ,Android authority I think k did one
2SHAYNEZ
Have you done tests to see how fast it charges? I already have a module that I used with my moto x before but never used it with the g3. I remembered it took forever with the moto x and that had a smaller battery.
guapinoy said:
Have you done tests to see how fast it charges? I already have a module that I used with my moto x before but never used it with the g3. I remembered it took forever with the moto x and that had a smaller battery.
Click to expand...
Click to collapse
Indeed I have done testing, but not "scientific testing", more "real world" testing (basically I've been using it for 2 days ).
So far, the rate that it charges seems pretty close to what I've grown to expect from the Nexus 5. Hard to say how fast it goes from 0% to 100%, as I rarely if ever have my phone go below 40% (since I have a Qi charger almost everywhere I go, even in the car).
So far though, if at 100% and put on the charger, it stays at 100% with the screen off, if a GPU intensive DayDream is running with the screen on, the battery does drain a bit but at a very slow rate (perhaps 2-3% per hour).
Last night I put it on the charger at around 70% battery, and it was 100% in under an hour, which is about what I see with my Nexus 5 as well.
Hmm I don't really use nfc... Is there any issues fit issues with installing this inside the battery door? Or does it not charge even if nfc is off?
Sent from my LG-D852 using Tapatalk
pyro224 said:
Hmm I don't really use nfc... Is there any issues fit issues with installing this inside the battery door? Or does it not charge even if nfc is off?
Sent from my LG-D852 using Tapatalk
Click to expand...
Click to collapse
Installing it inside will and probably still add a slight bulge. These wireless chips are not paper thin. You have coils and ribbons so it will be thick.
pyro224 said:
Hmm I don't really use nfc... Is there any issues fit issues with installing this inside the battery door? Or does it not charge even if nfc is off?
Sent from my LG-D852 using Tapatalk
Click to expand...
Click to collapse
iazybandit said:
Installing it inside will and probably still add a slight bulge. These wireless chips are not paper thin. You have coils and ribbons so it will be thick.
Click to expand...
Click to collapse
Actually this particular wireless antenna is very thin and fits just fine behind the battery door, the problem is the NFC antenna actually keeps the wireless charging antenna from even working, so when you put it inside the battery door on an AT&T G3, it simply won't charge due to the NFC antenna causing interference.
Hey thanks! so it must be outside the case then. I read in the Amazon reviews that this receiver only charges at 500 mah, and some phones will interpret this as USB charging and charge slower. How do you find the charging speed?
shayneflashindaily said:
My PMA coil works just fine with my d850. I bought my coil for 20$ and installed it on backplate.... I need my USB port. Seen this the other day. Att shiykd have used qi to begin with.
2SHAYNEZ
Click to expand...
Click to collapse
Can a OE battery cover with Qi be used? I've seen these for all but the AT&T device.
TonyStark said:
Can a OE battery cover with Qi be used? I've seen these for all but the AT&T device.
Click to expand...
Click to collapse
Not for the D850 or D852. It's hardware based so it has to be PMA.
TonyStark said:
Can a OE battery cover with Qi be used? I've seen these for all but the AT&T device.
Click to expand...
Click to collapse
No sadly the d850 uses the PMA technology which I have no idea why.. It sucks because the PMA coil makes a bulge when installed and its hard to get it right... I have a back plate with it but barely use it. My extended mugen battery does the trick.
Sent from my LG-D850 using XDA Free mobile app
TonyStark said:
Can a OE battery cover with Qi be used? I've seen these for all but the AT&T device.
Click to expand...
Click to collapse
We have a special PMA OEM case. We also have these stickers for the DIYers, but they'll leave a slight bulge on the battery cover.
At least the official LG cases are coming down in price. They cost $20 to $30 more two weeks ago when I bought my G3.
I just wish I could find an extended battery case with a quick circle window. I didn't think that would be a hard-to-find product, but it is....
I have two Qi chargers and I really don't want to buy a Powermat - So I will probably give this a try. However before I do, I have a question
- Did LG make a hardware change to disable "Qi" and enable "PMA" or this is just a firmware thing? To elaborate is it possible to flash Tmobile firmware and get Tmobile Qi back cover make "Qi" work?
cnewsgrp said:
I have two Qi chargers and I really don't want to buy a Powermat - So I will probably give this a try. However before I do, I have a question
- Did LG make a hardware change to disable "Qi" and enable "PMA" or this is just a firmware thing? To elaborate is it possible to flash Tmobile firmware and get Tmobile Qi back cover make "Qi" work?
Click to expand...
Click to collapse
This falls on the Hardware side. No firmware will enable Qi. We are stuck with PMA
Just bought from eBay for 3.45 USD http://www.ebay.com/itm/161689530982. Lets hope it works
It works but charges really slow. If anyone over 20 reps wants it - I will ship it for free - gift to XDA
skeevydude said:
We have a special PMA OEM case. We also have these stickers for the DIYers, but they'll leave a slight bulge on the battery cover.
At least the official LG cases are coming down in price. They cost $20 to $30 more two weeks ago when I bought my G3.
I just wish I could find an extended battery case with a quick circle window. I didn't think that would be a hard-to-find product, but it is....
Click to expand...
Click to collapse
Are you sure that case has PMA charging? One of the answered questions says it doesn't...
scottharris4 said:
Are you sure that case has PMA charging? One of the answered questions says it doesn't...
Click to expand...
Click to collapse
It might not....the LG PMA case was around $50 iirc. It's only $30 now. Might be a different product or they're out of our PMA cases. Just get a sticker if you really need PMA. Personally, I'm a bit worried about it frying my phone (had a really unlucky past year with electronics being fried).
I really starting to think to do what you have done
I just received mine and popped it on instantly.
Guys / gals, this is by far the best presentation I have ever seen in a case/back cover. Way better than OEM IMHO.
It's real leather (smells like a new car with leather interior), cut is fantastic, quality is amazing. I put it on and popped on to my CHOEtech 3coil Qi wireless charging stand and it starting charging instantly, no worries about placement or finding the sweet spot.
The packaging it came in is like a compressed cardboard or particle wood casing you'd keep cigars in. I got the BROWN one.
LG V10 Wireless Charging Battery Leather Door Back Cover Case http://www.ebay.com/itm/281853142038
Hey would you or anyone else have a TYLT VU Charger ? I bought one Amazon when they were on sale but I also have 2 cheaper knockoffs Itian's. All 3 are working for me I picked up the Black Leather Back. But on the TYLT I have issue where the phone will connect to Wireless charging and then disconnect it might do this up to 3 times or 2x and once the screen turns off it will be connected and can tell by the Green Light. The Itian's just plan connect and don't have this issue. I also have a Nexus 6 and it connects with the TYLT just fine without that issue.
Not sure if's really a issue will give it time since I just got the Leather Back today will see how it perform's.
Well now looks like my Itian's are having the same issue but now it won't even connect the light will just Flash from Red to Blue no stop.
Does this feel "soft"?
Current price is 10.49 without wireless charging. How much was it for the wireless charging version? They are currently out of stock so cant see pricing for that option.
melcali said:
Does this feel "soft"?
Current price is 10.49 without wireless charging. How much was it for the wireless charging version? They are currently out of stock so cant see pricing for that option.
Click to expand...
Click to collapse
I paid $16 on eBay from a US seller. It does have a nice feel to it but really don't matter to me since mine will be a case 99% of the time. I decided for $16 why not since the sticker along is $10-$15.
FWIW, I too bought the $16 eBay back, and was just refunded by the seller today. It has connect/disconnect issues, and heats my phone up way too hot. Seller claims he is removing them for sale, and sending the batch back to distributor. FYI for anyone considering this product t.
meatlocker said:
FWIW, I too bought the $16 eBay back, and was just refunded by the seller today. It has connect/disconnect issues, and heats my phone up way too hot. Seller claims he is removing them for sale, and sending the batch back to distributor. FYI for anyone considering this product t.
Click to expand...
Click to collapse
What seller you buy from ? I sent a message but never got a response plus it's only been 24hours will give them a few days and send another.
BDestroyer8418 said:
What seller you buy from ? I sent a message but never got a response plus it's only been 24hours will give them a few days and send another.
Click to expand...
Click to collapse
connectionstation
meatlocker said:
FWIW, I too bought the $16 eBay back, and was just refunded by the seller today. It has connect/disconnect issues, and heats my phone up way too hot. Seller claims he is removing them for sale, and sending the batch back to distributor. FYI for anyone considering this product t.
Click to expand...
Click to collapse
meatlocker said:
connectionstation
Click to expand...
Click to collapse
I bought the same, paid $14, mine does not have the issues you mentioned. I use a ChoeTech 3coil stand. It is warm while charging until full, like all my Qi devices..
I've had the case for a bit over a month now, ordered the white to match my phone.
The good is that the color matches well, apart from the lines you can see where the leather is applied, it pairs nicely with the phone. The wireless charging works great, and it has a generous amount of wiggle room when placing it on a qi charger compared to my old S6 which was tricky to place just right. It also feels very nice in the hand compared to the textured back, and is much more grippy surprisingly, especially when the phone gets a bit warm, getting your hand a little sweaty.
The bad parts are that it is noticeably thicker than the OEM cover, and you can feel it when you place your finger on the power button to unlock it. The other part would be more likely my fault, since I choose white, but it gets very dirty and it can be tedious having to take it off every so often to clean it. The third and last part, three clips on my case have already broken. They are on both sides, near the bottom. Most likely from constantly taking it off to change batteries, and cleaning it every few days.
I got one white leather and 2 plastic one's, I have stopped using it as some members said they had their phone wireless feature dead after a few weeks, has anyone had this problem.
I got the same case in black from Amazon for $18. It came in the same package and box. The material was fake PU leather. Returned it
They must be taking a loss or something. They're now going for $25 without the charger (still not available)
Got in the LG OEM wireless charging back today for the V10. It is of very nice quality and maybe only a hair thicker then stock back, very hard to tell. I don't think there will be any problem fitting into standard cases.
I got it for the everyday low price of $79.00 plus shipping from Amazon.
Only has LG and not V10 on the back corner.
I've add a few pictures showing it side by side with the stock back.
Very cool but also a bit pricey but it's LG oem so your gonna pay a bit more bought a cheap back cover from china with wireless charging that works well only paid about 15 bucks it has a leather back and the fit isn't quite as good as the stock back if you have the money I would definitely get the one you picked
I've used both Yootech and OEM. OEM charges quite a bit quicker and with less heat.
Thanks to the OP's for the information and photo's.
It isn't going to be much different in the quality of the charging, the only different is the built quality, the QI and PMA circuit (PCB) is in the phone, the back cover only contains the coil to complete the wireless charging part.
The current coil use for both the OEM and third party is a flexi coil, isn't the best, it's used because it's thin, I'm going to mod mine when I get the V10 within the week, and put a proper copper strand wire coil, has better detection, less heat and less transmission loss.
I have a few types of coils made especially for wireless charging, and will post back.
you can just buy the Qi receiver sticker for less than $10 and apply yourself.. why would anyone buy this for that price?
cepheid46e2 said:
I've used both Yootech and OEM. OEM charges quite a bit quicker and with less heat.
Click to expand...
Click to collapse
That doesn't make sense, the charging hardware is already built into the v10, 3rd party including OEM is just a coil and connection to the pins. Which should not make a difference in charging speed or heat. Only thing that might affect that is placement and alignment of the back of your v10 to the charging pad..
What are you using to determine charging speed and heat?
EDIT: Attached is my Brown Leather Back with NFC/Qi sticker. (btw is that the British way of spelling chargeing?) I've also ordered NeWisdom's sticker, will review once I get it in and on.
Where did you get the leather charging back from? Is it much thicker then the stock back? Please let me know how the NeWisdom sticker works out. Was going to order one also.
clockcycle said:
That doesn't make sense, the charging hardware is already built into the v10, 3rd party including OEM is just a coil and connection to the pins. Which should not make a difference in charging speed or heat. Only thing that might affect that is placement and alignment of the back of your v10 to the charging pad..
What are you using to determine charging speed and heat?
EDIT: Attached is my Brown Leather Back with NFC/Qi sticker. (btw is that the British way of spelling chargeing?) I've also ordered NeWisdom's sticker, will review once I get it in and on.
Click to expand...
Click to collapse
You are correct to a certain point, both OEM and third party uses a flexi coil with a flexi magnet, the quality of these also determine the detection and aligment.
felloffthetruck said:
Where did you get the leather charging back from? Is it much thicker then the stock back? Please let me know how the NeWisdom sticker works out. Was going to order one also.
Click to expand...
Click to collapse
There on eBay just search connection station on eBay around $15 four different colors there slightly thicker than the stock back you can tell the difference by the volume buttons but not too bad a fit though
I just received my leather back with wireless charging from eBay today and it's not charging at all, is there some setting I need to turn on? I'm using an official Samsung qi charger btw.
timbawolf2k said:
I just received my leather back with wireless charging from eBay today and it's not charging at all, is there some setting I need to turn on? I'm using an official Samsung qi charger btw.
Click to expand...
Click to collapse
There are no special settings that I'm aware of.
I'm fairly irritated at LG for the glacial speed at which they're releasing official accessories for the v10 . . .
Now that that's out of the way, I bought this: http://smile.amazon.com/gp/product/B017R40JRA?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It's already unavailable (which isn't terribly surprising). It is just a little too thick, which pops the case up a bit over my power/volume buttons (so they're annoying to use). Also, it's pretty much stopped working. I might try to realign the thing, but it worked fine for both NFC and Qi (TYLE Vu) for the first week or so. Now it doesn't reliably charge (though NFC continues to function).
All-in-all, I'd rather pay for an OEM cover, where I SHOULD have to worry less about alignment and having a poor fit.
I'm curious about the NeWisdom though . . .
QMaverick said:
I'm fairly irritated at LG for the glacial speed at which they're releasing official accessories for the v10 . . .
Now that that's out of the way, I bought this: http://smile.amazon.com/gp/product/B017R40JRA?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It's already unavailable (which isn't terribly surprising). It is just a little too thick, which pops the case up a bit over my power/volume buttons (so they're annoying to use). Also, it's pretty much stopped working. I might try to realign the thing, but it worked fine for both NFC and Qi (TYLE Vu) for the first week or so. Now it doesn't reliably charge (though NFC continues to function).
All-in-all, I'd rather pay for an OEM cover, where I SHOULD have to worry less about alignment and having a poor fit.
I'm curious about the NeWisdom though . . .
Click to expand...
Click to collapse
Just got in the NeWisdom but have not tried it yet.
Here is the OEM wireless charging cover on Best Buy:
http://www.bestbuy.com/site/lg-wireless-charging-back-cover-for-lg-v10-cell-phones-black/4701800.p?id=1219803565680&skuId=4701800
Here is a video of the NeWisdom:
https://www.youtube.com/watch?v=YXmehP0YRp8
QMaverick said:
I'm fairly irritated at LG for the glacial speed at which they're releasing official accessories for the v10 . . .
Now that that's out of the way, I bought this: http://smile.amazon.com/gp/product/B017R40JRA?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It's already unavailable (which isn't terribly surprising). It is just a little too thick, which pops the case up a bit over my power/volume buttons (so they're annoying to use). Also, it's pretty much stopped working. I might try to realign the thing, but it worked fine for both NFC and Qi (TYLE Vu) for the first week or so. Now it doesn't reliably charge (though NFC continues to function).
All-in-all, I'd rather pay for an OEM cover, where I SHOULD have to worry less about alignment and having a poor fit.
I'm curious about the NeWisdom though . . .
Click to expand...
Click to collapse
I liked the wireless charging on my nexus 6 so when i bought the V10 i had to get wireless charging working on it so i bought the leather qi/nfc back for $15 of eBay (connection station) and it works very well with the Anker qi little disc charger i bought off Amazon but the leather back doesn't fit exactly as good as the stock back there's that little gap by the volume buttons you described but worth it to have the wireless charging working
Yeah, I'm going to give it a few weeks--hopefully the stock one will come out (a more reasonable price would be nice too), or someone will come up with a back cover that's a better fit. A guy can dream, right?
QMaverick said:
I'm fairly irritated at LG for the glacial speed at which they're releasing official accessories for the v10 . . .
Now that that's out of the way, I bought this: http://smile.amazon.com/gp/product/B017R40JRA?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It's already unavailable (which isn't terribly surprising). It is just a little too thick, which pops the case up a bit over my power/volume buttons (so they're annoying to use). Also, it's pretty much stopped working. I might try to realign the thing, but it worked fine for both NFC and Qi (TYLE Vu) for the first week or so. Now it doesn't reliably charge (though NFC continues to function).
All-in-all, I'd rather pay for an OEM cover, where I SHOULD have to worry less about alignment and having a poor fit.
I'm curious about the NeWisdom though . . .
Click to expand...
Click to collapse
QMaverick said:
Yeah, I'm going to give it a few weeks--hopefully the stock one will come out (a more reasonable price would be nice too), or someone will come up with a back cover that's a better fit. A guy can dream, right?
Click to expand...
Click to collapse
Just wait for Best Buy to have it for $59.00 I'm sure this will be the retail price once it hit's the shelves.
clockcycle said:
That doesn't make sense, the charging hardware is already built into the v10, 3rd party including OEM is just a coil and connection to the pins. Which should not make a difference in charging speed or heat. Only thing that might affect that is placement and alignment of the back of your v10 to the charging pad..
What are you using to determine charging speed and heat?
EDIT: Attached is my Brown Leather Back with NFC/Qi sticker. (btw is that the British way of spelling chargeing?) I've also ordered NeWisdom's sticker, will review once I get it in and on.
Click to expand...
Click to collapse
GSM and the fact that it literally takes twice as long with the Yootech. So a watch is what I'm using to determine the speed. It can and does make sense as it depends on the conduction of the materials used. If yootech uses different metal composition in the coil then it gives off more heat energy and doesn't charge as fast. Welcome to physics.
felloffthetruck said:
Just got in the NeWisdom but have not tried it yet.
Here is the OEM wireless charging cover on Best Buy:
http://www.bestbuy.com/site/lg-wireless-charging-back-cover-for-lg-v10-cell-phones-black/4701800.p?id=1219803565680&skuId=4701800
Here is a video of the NeWisdom:
https://www.youtube.com/watch?v=YXmehP0YRp8
Click to expand...
Click to collapse
That looks pretty nice. Check out my cart here, you can see all my goodies. I'm going with an off brand Spigen clone because I like to use my phone wile it's on the dock and this one looks more stable for that.
I am planning to go with the Yootech back cover. Hopefully it's wont cause the phone to get warm like some others seem to be saying...
For the OEM back, is it able to trickle charge at 100%? On my Nexus 5 at 100% it would just trickle charge and stay connected and cool while keeping the battery full. With my qi leather back I got, it hits 100 disconnects and then reconnects in an endless cycle randomly waking my phone up and keeping it warm. Sometimes my Tylt clone will just shut off completely from the cycling which isn't conducive to having a topped off phone for overnight charging.
Panzer500 said:
For the OEM back, is it able to trickle charge at 100%? On my Nexus 5 at 100% it would just trickle charge and stay connected and cool while keeping the battery full. With my qi leather back I got, it hits 100 disconnects and then reconnects in an endless cycle randomly waking my phone up and keeping it warm. Sometimes my Tylt clone will just shut off completely from the cycling which isn't conducive to having a topped off phone for overnight charging.
Click to expand...
Click to collapse
Bought a little Anker qi disc charger of Amazon for $12 it claims that it regulates the heat and that it doesn't waste energy overcharging i just put my phone on it when i go to bed wake up and it's at 100% and my phones not hot the charger has 2 led's blue when it's charging and red and blue when the phones charged
This wireless charger is one of today's deals on Amazon: http://www.amazon.com/Anker-Wireless-PowerPort-Charging-Qi-Enabled/dp/B00Y839YMU/ref=dp_ob_title_wld
I've heard a pretty substantial amount of good reviews for this charger, so I'm thinking of picking it up since it's only $15. I was also looking into getting an OEM LG wireless charging back, but I'm not willing to pay $50+ for it. Ran across the NeWisdom Qi sticker and it seems to have mixed reviews: http://www.amazon.com/NeWisdom-Wire...sr=8-1&keywords=lg+v10+wireless+charging+chip
Was wondering if anybody has had experience with the NeWisdom Qi sticker. Any overheating? Went bad after a while? Ect.
THE TEAM!!!
ThisIsCheez said:
This wireless charger is one of today's deals on Amazon: http://www.amazon.com/Anker-Wireless-PowerPort-Charging-Qi-Enabled/dp/B00Y839YMU/ref=dp_ob_title_wld
I've heard a pretty substantial amount of good reviews for this charger, so I'm thinking of picking it up since it's only $15. I was also looking into getting an OEM LG wireless charging back, but I'm not willing to pay $50+ for it. Ran across the NeWisdom Qi sticker and it seems to have mixed reviews: http://www.amazon.com/NeWisdom-Wire...sr=8-1&keywords=lg+v10+wireless+charging+chip
Was wondering if anybody has had experience with the NeWisdom Qi sticker. Any overheating? Went bad after a while? Ect.
Click to expand...
Click to collapse
I nominate you to take one for the team. Let us know!
Dont bother...I've tried several wireless charging sticker/Qi combos and it just drains the battery.
dr_w said:
Dont bother...I've tried several wireless charging sticker/Qi combos and it just drains the battery.
Click to expand...
Click to collapse
So i bought the new Wisdom sticker off Amazon. I'll say this--i used a hair dryer as the instruction indicates--and peeled the original NFC only sticker off (or so i thought) and applied the new wisdom. It would register like it was charging but not actually charge as dr_w indicates above.
HOWEVER...frustrated i looked at a couple videos and noticed that the battery doors with the sticker fully removed didn't look like mine. With an exacto knife i picked at the remaining black area only to find there was still copper wire underneath. In effect the original NFC sticker had multiple layers and i'd only peeled off the top. Getting ALL of it up was a challenge...like a real challenge...it did not peel off i had to scrape with a knife for an extended period of time.
At the end of the day though once i had the original sticker all the way off i reapplied the New Wisdom Sticker (which surprisingly survived multiple attempts at reapplying without ill effect). Then setting it on my Spigen charger stand and running the Ampere app i was amazed at how well it was charging. It actually was over 1000ma at one point and after finding it's range (it starts low and builds) it averaged at about 800ma. That was decent enough to charge my phone pretty quick. For reference fast charging is like 1350--1500ma or so. In comparison the Monroy wireless back i bought from Amazon that already had a sticker applied (presumably NOT New Wisdom) typically does maybe 350-500ma.
So the bottom line is it was WAY more of a pain than i anticipated but now i'm stoked and actually rather impressed with the performance.
LEt us know if its consistent. I've had a very similar experience before it began discharging at a rapid rate. Thanks for the post, I'll keep checking back.
Originally had a cheap sticker off eBay that lasted several months, about 3,then the chip in the phone caved out. Got the newisdom the other day and got a Tylt charger to go with 2 Samsung fast chargers and no issues so far. The constant lighting up the phone when it's charged is annoying and the g4 tweaksbox doesn't seem to fix it.
I'm using the OEM LG wireless back and it's quite nice. Feels exactly like the original and fits very flush, no problems with wireless detection on my TYLT charger. I'm actually surprised at how little the back weighs as my understanding is the copper coils should add some noticeable weight but in this case it doesn't. Maybe not that much copper in these OEM backs?
Just ordered an OEM wireless charging back for my V10 (a seller on Amazon has it for $29.99 atm though no prime shipping with the fastest option being expedited shipping) and due to the price, I'd imagine it already being sold out by the time this post is read. I didn't want to get the third party stickers as I want to keep my current back and the third party plastic backs are pretty horrible in terms of feel and fit.
Anyways, what do you guys recommend for a good wireless charging pad? The official Samsung pads look interesting enough as is and I've seen it work with every device with Qi built in or using one of those plug-in Qi pads you place inside a case before the phone though I'm gonna have to wait til my next paycheck to get a pad: already spend a good chunk of cash on an MSI RX 480 and only bought this back due to the steal of a price at $29.99, $36 with expedited shipping. It was that or go with prime and spend $60 on a back
Finally received my OEM wireless back. As expected, the battery door feels exactly like the original back albeit curves near the button cutout due to the extra elevation it adds. Also makes cases a tighter fit if you're concerned about compatibility. Works on my Yootech wireless charger as well as a friend's Samsung wireless charger and Tylt Vu 3, the last two having the best range in terms of surface since the Yootech seems to only have one coil. As for charging, going from 0-100% took about 2-3 hours and the phone got pretty warm too though just a smidgen cooler than it gets when quick charging via cable. The packaging DOES have the description for what would've been a wireless charging variant of the Quickview cover which would attach as a battery door too but I guess that didn't work after all the hullabaloo about the faulty Qi chip. Sucks that the LG logo simply takes place of the rather sexy V10 logo
Either way, I'd recommend getting an OEM back when you can though might wanna wait. Some listing still sell it for $60 a pop and even $100