Here is the D80020c 4.4 .tot and .dll for AT&T D800 ONLY. This will not retain root and will wipe all your data and internal sdcard. Make a back-up of your important items before preceeding.
I AM NOT RESPONSIBLE FOR ANYTHING YOU WITH YOUR OWN DEVICE
Don't forget to hit the thanks button
***Quick Questioned Answered***
1.Can be flashed over D80010d and D80010o firmware
2.You will lose Root
3.NO WAY TO ROOT YET
4.You can use Lg Flash Tools to go back to 10d,10o.
Download:
1. LGFlashTools v1.5 - Download
2. Drivers - Download
3. Download the LGD800AT-01-V20c.zip (Mirrior)
Extract to a folder on desktop. There will be 2 files(.tot, .dll)
Credit to @madmack for making most of this Guide for the G Pro Which also works on our G2.
Credit to @hyelton for the original write up in the General section here.
Install:
1. Install the LG drivers downloaded above.
2. Install LGFlashTools v1.6 (but don't run it)
3. Extract the TOT and .DLL file from the ZIP
Drivers initialization:
1. Put the phone into download mode. (Turn off device PRESS VOL UP while plugging in the micro usb cable. If this doesn't work, try holding both volume keys instead)
2. Let the phone initialize and install the drivers. Once done, in Device manager, you should see the LG phone listed under COM ports (something along these lines).
3. Find that LG entry in Device Manager, click on Properties, Advanced and then change the COM port to COM41 and close/save.
4. Unplug your phone! Important step.
LGFlashTools:
To get this tool to work, you'll need to do a few tricks.
1. Set the computer's date to some time in July 2012 or before.
2. Disconnect the internet
3. Find a serial number or register key from somewhere on the web (a google search for lgflashtools serial will yield some results). Can't help you here and please don't share any keys in this thread or get us in trouble.
4. Execute the LGFlashTools. It should ask you for a key, put it in. Now you should see a dialog where you can load the DLL file and the TOT files that you extracted earlier. Put them both in here. Click ok
Flashing:
5. There is a yellow arrow on the top left. Click on it to initialize the process. Once done, it should say "ready/finished" or whatever.
6. Put the phone in download mode again, and plug it into the USB port. LG FLash Tools should start flashing it automatically. When it's done, it'll automatically reboot into your stock AT&T rom and all of your data and internal sdcard files will be gone.
Don't forget to hit the thanks button
@bigfau
Tempting but I hold a D802 International.... dont want to get it bricked....lol
Well thanks ....I know we will meet soon for the D802 Intl
I am on D80010o, should I proceed with 20c. how about root and recovery? am I able to flash back to 10d or 10o?
thanks in advance
srk_srinivas said:
I am on D80010o, should I proceed with 20c. how about root and recovery? am I able to flash back to 10d or 10o?
thanks in advance
Click to expand...
Click to collapse
I believe you can flash this from D80010o. I think I did it once to verify, but it was a long night. There is no root or recovery unless you count the stock one.Yes and yes.
bigfau said:
I believe you can flash this from D80010o. I think I did it once to verify, but it was a long night. There is no root or recovery unless you count the stock one.Yes and yes.
Click to expand...
Click to collapse
Thank you very much
Enjoy the Fast Download
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/AT&T/KitKat+TOT/
hyelton said:
Enjoy the Fast Download
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/AT&T/KitKat+TOT/
Click to expand...
Click to collapse
Thank you my friend.
good job and thank u very much
i`m on D80010d and i`m factory unlocked so i belive i can upgrade ye?
Prerevision said:
good job and thank u very much
i`m on D80010d and i`m factory unlocked so i belive i can upgrade ye?
Click to expand...
Click to collapse
Yes you can.
Why you post D800 at&t rom here ?
Can I flash with d802? What is a effect?
Sent from my Nexus 7 using Tapatalk
thanhpost said:
Why you post D800 at&t rom here ?
Click to expand...
Click to collapse
Why does it make a difference to you?
somboons said:
Can I flash with d802? What is a effect?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Seriously? Read the thread title.
bigfau said:
Why does it make a difference to you?
Seriously? Read the thread title.
Click to expand...
Click to collapse
Because people like somboons will try to flash it
This is G2 Android Development .It is not AT&T G2 Android Development .
Sent from my Nexus 7 using Tapatalk
nimrodsv said:
Because people like somboons will try to flash it
Click to expand...
Click to collapse
:laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh: So true, I meant to put it in AT&T section ,but it is what it is. I'm going to have it moved @Judge Joseph Dredd cause some people can't read.
Moved! And yes I agree to keep those that like to "jump before looking", the thread should be moved. Thanks and please carry on....
And thread stickied, for Members to find and utilize for the moment.
Thanks again, I flash it over my D80010o
srk_srinivas said:
Thanks again, I flash it over my D80010o
Click to expand...
Click to collapse
Yes, you can flash this over D80010d and D80010o
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
bigfau said:
Yes, you can flash this over D80010d and D80010o
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Thanks again @bigfau. I flashed this morning at it's running excellent! Any thoughts on 10q?
@srk_srinivas, this does wipe your phone, so be sure to backup first. I know it's been said before, but I've seen people miss that point many times.
SuperSport said:
Thanks again @bigfau. I flashed this morning at it's running excellent! Any thoughts on 10q?
@srk_srinivas, this does wipe your phone, so be sure to backup first. I know it's been said before, but I've seen people miss that point many times.
Click to expand...
Click to collapse
I'm looking into getting the 10q update. So like you said. We can root 10q and the take the OTA D80020c update and hopefully keep root.
Related
Required:
Install B2CAppSetup.exe, LG PC Suite IV and related driver.
1. Run LGMobile update
2. Plug your optimus 3d (debug mode on) and wait for the connection
3a. If there is a new version, click on Start upgrading software for lg phone
3b. If you allready have latest version, click on User/Support then emergency mode, insert your IMEI and click on check
4. Wait for download and upgrading (15/20 min)
PS. you will loose root, but you will not loose data, data.img is untouched
PS2. if you got some problems, try again. I've tried few time before have a successfully flash.
Thanks Fabio!!
Trying it now
Lets hope it works
It Worked
I was on the right path before, but i took 3 tries to get it updated!
Thanks!
Renegade_Rulez said:
Trying it now
Lets hope it works
It Worked
I was on the right path before, but i took 3 tries to get it updated!
Thanks!
Click to expand...
Click to collapse
What do you mean by 3 tries? What error message were you getting, if any?
shollywood said:
What do you mean by 3 tries? What error message were you getting, if any?
Click to expand...
Click to collapse
It just stopped at 50% and the third time it worked.
Thanks....
I keep getting phone does not support S/W update message
Sent from my SCH-I510 using XDA App
I'm having the same problem as the person above me.. i tried so many times.. i still get the same message "software not supported for this model.."
Please help..
Im in the US , have a developer model on May software. I changed the country to UK and was able to install drivers. I installed Pc Suite. But still getting that error message stating my phone model don't support s/w update
Sent from my SCH-I510 using XDA App
largo79 said:
Im in the US , have a developer model on May software. I changed the country to UK and was able to install drivers. I installed Pc Suite. But still getting that error message stating my phone model don't support s/w update
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Is it possible your model is 925 and not 920?
We need CWM so we can make a backup before trying to mess around in the system
It seems my recovery partition was messed up so again install original rom...
Renegade_Rulez said:
We need CWM so we can make a backup before trying to mess around in the system
It seems my recovery partition was messed up so again install original rom...
Click to expand...
Click to collapse
ROM Manager should start supporting the p920 later today.
erezak said:
Is it possible your model is 925 and not 920?
Click to expand...
Click to collapse
No its a 920 as I'm getting the same. So your updater always defaults to USA when you open it up correct?
aremcee said:
ROM Manager should start supporting the p920 later today.
Click to expand...
Click to collapse
wow thanks
The famous CM developer aremcee, nice to see you here as well.
Really loving your work on the LG O2x!
Looking forward to use CM7 on my O3D as well if someone decides to pick up the challenge (hint hint )
Renegade_Rulez said:
wow thanks
The famous CM developer aremcee, nice to see you here as well.
Really loving your work on the LG O2x!
Looking forward to use CM7 on my O3D as well if someone decides to pick up the challenge (hint hint )
Click to expand...
Click to collapse
It'll be a while before that. We had zero support for OMAP4 in CM, and merging it in will have to be done carefully to avoid breaking everything else. The only thing I merged in already was the bootimage-building stuff, in order to get CWM out there.
aremcee said:
It'll be a while before that. We had zero support for OMAP4 in CM, and merging it in will have to be done carefully to avoid breaking everything else. The only thing I merged in already was the bootimage-building stuff, in order to get CWM out there.
Click to expand...
Click to collapse
No hurry for that, whenever you are ready we will see it
Thanks a lot for your hard work!
aremcee said:
ROM Manager should start supporting the p920 later today.
Click to expand...
Click to collapse
Done. You can now flash CWM from ROM Manager (and reboot into recovery, and backup, and all the neat stuff RM does) on the O3D.
aremcee said:
Done. You can now flash CWM from ROM Manager (and reboot into recovery, and backup, and all the neat stuff RM does) on the O3D.
Click to expand...
Click to collapse
Did my first backup feels good to be safe again!
Can I move the backup to external sd?
Sent from my LG-P920 using Tapatalk
Where can i find the CWM for this phone?
My phone model is LGP929 -- and its running the 08 software
hi i just read the news on LG Thrill via Android Police
and ATT has released ICS for LG Thrill
can any dev post how to install it on P920 the international version of LG optimus 3D
Many Thanks.
http://www.androidpolice.com/2013/03/19/att-resurrects-the-lg-thrill-4g-from-the-dead-gives-it-ics/
coolshah said:
hi i just read the news on LG Thrill via Android Police
and ATT has released ICS for LG Thrill
can any dev post how to install it on P920 the international version of LG optimus 3D
Many Thanks.
http://www.androidpolice.com/2013/03/19/att-resurrects-the-lg-thrill-4g-from-the-dead-gives-it-ics/
Click to expand...
Click to collapse
You're very late. Look around. You install it as you would any KDZ. Supported languages are English, Spanish, and French.
Android1993 said:
You're very late. Look around. You install it as you would any KDZ. Supported languages are English, Spanish, and French.
Click to expand...
Click to collapse
but mylg update tool is giving me problems it not running
giving me this error
"please check your internet line and execute program again"
do you have the link for KDZ file?
coolshah said:
but mylg update tool is giving me problems it not running
giving me this error
"please check your internet line and execute program again"
do you have the link for KDZ file?
Click to expand...
Click to collapse
KDZ: http://forum.xda-developers.com/showthread.php?t=2196494
Bin Files: http://forum.xda-developers.com/showthread.php?t=2198069
You can use whichever method you're accustomed to. I usually do KDZ.
Android1993 said:
KDZ: http://forum.xda-developers.com/showthread.php?t=2196494
Bin Files: http://forum.xda-developers.com/showthread.php?t=2198069
You can use whichever method you're accustomed to. I usually do KDZ.
Click to expand...
Click to collapse
you can use LG flash tool to flash Bin files , following this guide don't forget to use P925 dll
http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.html
Re: Official 3D ICS Update! AT&T Resurrects The LG Thrill 4G From The Dead, Gives It
coolshah said:
but mylg update tool is giving me problems it not running
giving me this error
"please check your internet line and execute program again"
I also had this problem but after about 2 hours i managed to update my phone: here how i did the update:
Just connect to internet then immediately disconnect from internet within 1 or 1.5 seconds the program just needs to confirm that there is an established connection, i used this (my own) trick and I successfully updated my LO3D froyo to GB using kdz
Keep in mind that you need to connect to internet only for 1 second then DISCONNECT internet
Good luck
Click to expand...
Click to collapse
Hi i tried to flash it (.bin files) and once its done flashing and the phone reboots i get this message
"Encryption unsuccessful"
It has a button with Reset phone i press it but nothing happens i tried to reboot phone 5 times no luck please help many thanks.
coolshah said:
Hi i tried to flash it (.bin files) and once its done flashing and the phone reboots i get this message
"Encryption unsuccessful"
It has a button with Reset phone i press it but nothing happens i tried to reboot phone 5 times no luck please help many thanks.
Click to expand...
Click to collapse
Power off the phone and press Power + VOL Down + 3D as you usually would to get into recovery. From there you follow the steps to factory reset your device.
Android1993 said:
Power off the phone and press Power + VOL Down + 3D as you usually would to get into recovery. From there you follow the steps to factory reset your device.
Click to expand...
Click to collapse
Mine was only Power and VOL down , and i reset factory my phone, he can try both way
Android1993 said:
Power off the phone and press Power + VOL Down + 3D as you usually would to get into recovery. From there you follow the steps to factory reset your device.
Click to expand...
Click to collapse
kupuku said:
Mine was only Power and VOL down , and i reset factory my phone, he can try both way
Click to expand...
Click to collapse
oh my God Thank You Very much man I love you guys thanks foe the tips. you guys saved me.
this method worked: "Power and VOL down" than it asked me for factory reset
well after I set it up
now it wont get any network I am currently in UK using LYCA mobile can any one tell me any solution?
coolshah said:
well after I set it up
now it wont get any network I am currently in UK using LYCA mobile can any one tell me any solution?
Click to expand...
Click to collapse
Just flash the right baseband you will get it works, you should try V28 baseband , if it doesn't try the V30 one
here http://d-h.st/Zzs
kupuku said:
Just flash the right baseband you will get it works, you should try V28 baseband , if it doesn't try the V30 one
here http://d-h.st/Zzs
Click to expand...
Click to collapse
same no luck i tried the one you posted and the one that came with ics LGP925_V30B_00_CP.fls
still no network
Hope someone can help
I was running GB rooted. No custom ROM just rooted.
I saw the update, so I wanted to start fresh. I reset the phone, installed the update (lost root, as expected), went to apply root with Megatron Root Exploit, and it would not allow me to obtain root. Kept getting an error about directory not found. Don't recall the exact error.
I am currently running the ICS update with no issues, but would like to be rooted as I am missing a few apps that require root.
Any ideas?
Thanks in advance
tmoca said:
I was running GB rooted. No custom ROM just rooted.
I saw the update, so I wanted to start fresh. I reset the phone, installed the update (lost root, as expected), went to apply root with Megatron Root Exploit, and it would not allow me to obtain root. Kept getting an error about directory not found. Don't recall the exact error.
I am currently running the ICS update with no issues, but would like to be rooted as I am missing a few apps that require root.
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
to root use this procedure http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
coolshah said:
to root use this procedure
Click to expand...
Click to collapse
What procedure??? I am not sure what you mean?
tmoca said:
What procedure??? I am not sure what you mean?
Click to expand...
Click to collapse
sorry i forgot the link i just added it in the post
http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
coolshah said:
sorry i forgot the link i just added it in the post
http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
Click to expand...
Click to collapse
Sorry if this is a dumb question, but I am still a bit of a noob. I have only rooted once.
It appears form the link you posted that this is installing a custom rom. That is not what I am looking to do. Previously I was running GB, stock, just rooted to be able to freeze some apps and use a few apps that required root. That is all that I am looking to do at this point too.
ICS is loaded and running fine. Is there a way to get root back with out flashing and installing custom roms? or is this something that the hasn't been figured out yet?
Thanks again for your time and patience with me
tmoca said:
Sorry if this is a dumb question, but I am still a bit of a noob. I have only rooted once.
It appears form the link you posted that this is installing a custom rom. That is not what I am looking to do. Previously I was running GB, stock, just rooted to be able to freeze some apps and use a few apps that required root. That is all that I am looking to do at this point too.
ICS is loaded and running fine. Is there a way to get root back with out flashing and installing custom roms? or is this something that the hasn't been figured out yet?
Thanks again for your time and patience with me
Click to expand...
Click to collapse
so what rom you are on? ICS or GB?
if you are on ICS
than only follow the Root steps there http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
How to root:
1. Download Su_Bbox_1.20.2_gazhead_signed.zip and save it somewhere in your SD card
2. Use OS_Hacking's tool to install Wkpark's v1.25a bootloader (read his instructions and install OMAP driver first). After this step, your boot-up LG logo will be silver!
3. With the same tool install a GB recovery. (ICS recoveries are only for xbsall's ported SU760 ROM, they can't read your internal SD)
4. Boot into recovery
5. Flash the zip from step (1) and reboot
Root?
coolshah said:
so what rom you are on? ICS or GB?
if you are on ICS
than only follow the Root steps there http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
How to root:
1. Download Su_Bbox_1.20.2_gazhead_signed.zip and save it somewhere in your SD card
2. Use OS_Hacking's tool to install Wkpark's v1.25a bootloader (read his instructions and install OMAP driver first). After this step, your boot-up LG logo will be silver!
3. With the same tool install a GB recovery. (ICS recoveries are only for xbsall's ported SU760 ROM, they can't read your internal SD)
4. Boot into recovery
5. Flash the zip from step (1) and reboot
Click to expand...
Click to collapse
This looks like I have to bootload a custom rom and go back to gingerbread? Excuse my noobness you can see I just registered to ask this question. Also load a different baseband from the V30 I am on now?
I finally got ICS and dont want a custom ROM like tmoca asked.
KitKat the EASY Way!!!!
Or, go back to 4.2.2 JellyBean
If you are going to return your phone back to warranty, I would suggest this method in this thread as it does a COMPLETE wipe of your device and puts it back to 'Factory'. It removes Root Flags so it does not show having been rooted, and removes ALL data.
Disclaimer: This is not MY method, but a method I used. The information and files have been figured out over time by many individuals and it's been combined in this thread.
This thread is to help Noobs AND Veterans to flash their ATT D800 LG G2 to KitKat. This will be very spelled out, and I’ve even included a video (see below), so NO Mistakes. Yes, that means you!
PLEASE refer to the Video Below before asking questions, as too many questions get a little overwhelming.
Warning! Please Read!
This WILL erase everything on your phone and put it back to FACTORY STATE, so be sure you’ve backed up!
Ok, first thing you need to do is download the version you want. I’ve got KitKat 4.4.2 version D80020c, and I’ve got JellyBean 4.2.2 version D80010o. These are VERY LARGE files, so be patient, although I am able to get as much as 6MB/s download speeds from this server.
BIG THANKS TO bigfau for the KitKat TOT and DLL files!!!
Download Installer - KitKat 4.4.2 D80020c - This Flashes Stock KitKat, WITHOUT Root, and WITHOUT Recovery. - Use TowelRoot and AutoRec to get Root and Custom Recovery. - Single File LARGE archive. KK MIRROR DOWNLOAD
D80020c Split Archive Download - This is the same archive as above, but split into smaller pieces for easy download.
Download Installer - JellyBean 4.2.2 D80010o - Single File LARGE archive. JB MIRROR DOWNLOAD
D80010o Split Archive Download - This is the same archive as above, but split into smaller pieces for easy download..
Download Installer - JellyBean 4.2.2 D80010d - This is for those who want to install Custom Recovery and not update to KK... - Single File LARGE archive.
Now, for the fun stuff (You may want to print this out for reference and check them off as you go)
Pre-requisites:
1. Be sure your phone is currently running a Compatible based ROM. If not, please flash a Custom Compatible Based ROM onto your phone. (ie: If you have a D800, be sure you have a D800 ROM on it. If you have a D802, be sure you have a D802 based ROM on it.)
2. Be sure you have turned on USB Debugging before starting.
Step #1: Program Installation:
1. Save the installer to your desktop
2. Run the Installer by double clicking
3. Wait a while for everything to extract (It might look like nothing is happening. This can take a few minutes, be patient, it’s HUGE)
4. (On Win7 or Win8, Accept User Account Control)
5. Accept my License
6. Don't Change Anything and click ‘Install’
7. Wait some more… and more… Large files are extracting…
8. When it pops up, click ‘Next’ to install the LG drivers. Even if you’ve already installed them, install again! This is to verify you’ve got the right ones installed.
9. Click ‘OK’ to finish the Driver install
10. Click ‘Next to install the LG Flash Tool
11. Don't Change Anything and click ‘Install’
12. Uncheck ‘Run LGFlashTool 1.8.1.1023 and click ‘Finish’ (If you forget to uncheck this, just close the program when it opens)
13. Click ‘Next’ to start the LGFlashTool Patch. (This makes it so you don’t need to change the date back on your PC)
14. Click ‘Next’ again
15. Click the bullet to ‘Agree to my License’ and then click ‘Next’
16. Don't Change Anything and click ‘Next’
17. Click ‘Start’
18. Click ‘Next’
19. Click ‘Exit’ to finish Patch Installer
20. Congratulations, Program Installations are all DONE!
Step #2: Place Phone into Download Mode:
1. With phone NOT plugged into a USB Cable, Hold the Power button to turn off phone
2. Plug your USB cable into your computer
3. Hold the Volume UP Button on your Phone
4. While Still Holding the Volume UP button, plug in the USB cable to your Phone
5. Continue to hold the Volume UP button until your phone enters Download Mode
6. If this does not work, pull the USB cable and start from #1 of this section
Step #3: Change Com Port to 41
1. With your phone STILL in Download Mode and STILL Plugged into Computer
2. Go into Device Manager
---a. Press and hold your Windows Key (Between CTRL and ALT)
---b. Tap the ‘Pause/Break’ Key (Usually Top Right of Keyboard, might be different on yours)
---c. Click on ‘Device Manager’
3. In the Device List, scroll down to ‘Ports (COM & LPT) and double click to expand
4. Find the ‘LGE AndroidNet USB Serial Port (COM4)’ (Your COM Port Number might be different, that’s OK)
5. Double click to open the port
6. On the Tabs at the top of that screen, click on ‘Port Settings’
7. Click on ‘Advanced…’
8. Click on the Com Port number to drop down the list
9. Scroll down to ‘COM41’ and select it
10. Click ‘OK’ Button to save that
11. Click ‘OK’ Button to close the Com Port Properties
12. Close the Device Manager
13. Close the System Window
14. Go back to the Desktop
15. That’s it, You’ve Changed the Com Port to 41
Step #4: Run LGFlashTool:
1. Double Click the ‘LGFlashTool’ icon on the Desktop (Win7 or Win8 accept ‘User Account Control’)
2. In the ‘Model Config’ window, check the box ‘Select Manual Mode’
3. Next to the DLL space, click the Three Dots ‘…’
4. Select the DLL file named ‘LGD800_.....v160.dll’
---a. For 4.4.2 KitKat, select ‘LGD800_20130811_LGFLASHv160.dll’
---b. For 4.2.2 JellyBean, select ‘LGD800_20130904_LGFLASHv160.dll’
5. Click the ‘Open’ Button
6. Next to the S/W space, click the ‘Remove ALL’ Button
7. Next to the S/W space, click the ‘Add’ Button
8. Select the tot file for the version you are flashing
---a. For 4.4.2 KitKat, select ‘LGD800AT-01-V20c-310-410-FEB-02-2014+0.tot’
---b. For 4.2.2 JellyBean, select ‘LGD800AT-01-V10o-310-410-OCT-19-2013+0.tot’
9. Click the ‘Open’ Button
10. Click ‘OK’ Button to save choices
11. In the LG FlashTool program, click the ‘Yellow Arrow’ pointing to the Right.
12. Wait for the program to verify your DLL and TOT selections (This takes a while)
13. If successful, you will see ‘READY!!’ on ‘Port 1 (COM41)’
14. If you DON’T see ‘READY!!’, you may need to start over
15. If you see ‘READY!!’ unplug your phone from the USB cable and Plug it right back in. DO NOT PRESS ANY BUTTONS ON YOUR PHONE. It should STILL be in Download Mode.
16. The LG FlashTool progam will now start flashing your phone!!
17. At around 80%, the program will restart your phone.
18. It takes a while for the phone to restart, but it will boot to Android. Wait for the flash program to finish and it will turn your phone back OFF. And give you a ‘SUCCESS”
19. Close FlashTool
IF for some reason, the LG FlashTool does not finish 100%, and you get a ‘Fail’, as long as your phone has now rebooted into Android, you don’t need to worry about this. Just close the program, and enjoy your Freshly Restored LG G2!
For anyone having issue with the device check not passing due to mismatched device (caused by flashing a Custom ROM with Different device model ID to your D800: ie, D801 to a D800 or vice versa.), try using the attached dll file instead of the device specific one. It has been reported to work for many... You will need to extract the zip file to get the dll.
good stuff bud!
Thanks SuperSport. I have added a link to your thread in my guide.
Can we get an installer for 80100d . It will be easier for newbies
Just so you know, in step #4 you have 4.4.2 twice But great job man! You might want to use the 10d 4.2 as that is the one that recoveries work best with. Just a thought.
epapsiou said:
Thanks SuperSport. I have added a link to your thread in my guide.
Can we get an installer for 80100d . It will be easier for newbies
Click to expand...
Click to collapse
What variant is the 801? Sprint, Verizon? Sorry, on my phone at the moement.
EDIT: Doh! Now I know what you meant... Sorry...
BAM1789 said:
Just so you know, in step #4 you have 4.4.2 twice But great job man! You might want to use the 10d 4.2 as that is the one that recoveries work best with. Just a thought.
Click to expand...
Click to collapse
Thank you for that. FIXED.
EDIT: Why is 10d easier? Is it due to the script in ioroot22? I keep flashing 10o, then use ioroot22, then use FreeGee to install TWRP. Easy Peasy. BUT, I might have modified ioroot22 script for that, I don't remember ATM.
You my friend are a very nice person lol. Taking the time to put this together.
Sent from my LG-D800 using Tapatalk
SuperSport said:
EDIT: Why is 10d easier? Is it due to the script in ioroot22? I keep flashing 10o, then use ioroot22, then use FreeGee to install TWRP. Easy Peasy. BUT, I might have modified ioroot22 script for that, I don't remember ATM.
Click to expand...
Click to collapse
I haven't had my G2 very long so I haven't been able to test myself, but just looking around the forum seems the 10o firmware causes boot issues with some custom ROMs. I could be wrong though. Maybe the problem doesn't exist anymore and I'm reading old info.
SuperSport said:
What variant is the 801? Sprint, Verizon? Sorry, on my phone at the moement.
EDIT: Doh! Now I know what you meant... Sorry...
Thank you for that. FIXED.
EDIT: Why is 10d easier? Is it due to the script in ioroot22? I keep flashing 10o, then use ioroot22, then use FreeGee to install TWRP. Easy Peasy. BUT, I might have modified ioroot22 script for that, I don't remember ATM.
Click to expand...
Click to collapse
Ioroot and then freegee TWRP route works on 80100o. Unfortunately, flashing ROMs (stock based and flex based especially) causes issues. I do not think anyone figured out the reason but going to 80100d solves the issue.
epapsiou said:
Ioroot and then freegee TWRP route works on 80100o. Unfortunately, flashing ROMs (stock based and flex based especially) causes issues. I do not think anyone figured out the reason but going to 80100d solves the issue.
Click to expand...
Click to collapse
So I understand... If you flash Stock 10o, then Root and Flash Custom Recovery, you have issues flashing other ROMs? But if you Flash back to Stock 10d, you do not have issues flashing Custom ROMs?
Also, FYI: ioroot23 was just released... I don't know if that will make a difference. It has 10o support built in.
SuperSport bro u made my life so much easier. Thank u for your hard work bro.
Sent from my LG-D800 using Tapatalk
SuperSport said:
So I understand... If you flash Stock 10o, then Root and Flash Custom Recovery, you have issues flashing other ROMs? But if you Flash back to Stock 10d, you do not have issues flashing Custom ROMs?
Also, FYI: ioroot23 was just released... I don't know if that will make a difference. It has 10o support built in.
Click to expand...
Click to collapse
Yes that is correct.
I am not sure if rooting was an issue. It was the recovery that seemed to be the issue. Not sure though and I guess since 10d worked not many people bothered to investigate further.
epapsiou said:
Yes that is correct.
I am not sure if rooting was an issue. It was the recovery that seemed to be the issue. Not sure though and I guess since 10d worked not many people bothered to investigate further.
Click to expand...
Click to collapse
I'm having the same issue flashing any stock based rom on 800o. It throws me in a bootloop. How would I get the 800d fw?
Sent from my LG-D800 using Tapatalk
SuperSport said:
So I understand... If you flash Stock 10o, then Root and Flash Custom Recovery, you have issues flashing other ROMs? But if you Flash back to Stock 10d, you do not have issues flashing Custom ROMs?
Also, FYI: ioroot23 was just released... I don't know if that will make a difference. It has 10o support built in.
Click to expand...
Click to collapse
i can confirm this is true. i lg flash tool'ed back to 10o, while i could get root i couldnt get twrp or philz recovery to work. when i went back to 10d with lg flash tool, i could get root and recovery to work. i even loki'd a couple recoveries and the recoveries wouldnt only give me a black screen when i tried to enter them on 10o. and i used ioroot23 to do all of this with.
Is this tool safe to use if the phone shows rooted after you go into download mode? Although I swore I unrooted the phone.
Took a chance and did this anyway and all is good. Upgraded successfully! Thank you so much for providing this tool! It was such a pain searching for a serial for lgflashtool. Will be donating asap for the help. Thank you thank you thank you. Directions were perfect as well and very easy to follow.
Downloads not working for me... 68% complete is furthest I've gotten. Tried seven or 8 times.
Sent from my LG-D800 using xda app-developers app
Success! after using this I called AT&T and they pushed me another small update then after that the kitkta update. I know there's no recovery available yet right?
Sorry Everyone, I've been out of town and only on my phone, but mostly busy with family stuff.
freebee269 said:
i can confirm this is true. i lg flash tool'ed back to 10o, while i could get root i couldnt get twrp or philz recovery to work. when i went back to 10d with lg flash tool, i could get root and recovery to work. i even loki'd a couple recoveries and the recoveries wouldnt only give me a black screen when i tried to enter them on 10o. and i used ioroot23 to do all of this with.
Click to expand...
Click to collapse
Thank you for the clear info. I will build a 10d version. Hopefully tomorrow.
strose09 said:
Is this tool safe to use if the phone shows rooted after you go into download mode? Although I swore I unrooted the phone.
Took a chance and did this anyway and all is good. Upgraded successfully! Thank you so much for providing this tool! It was such a pain searching for a serial for lgflashtool. Will be donating asap for the help. Thank you thank you thank you. Directions were perfect as well and very easy to follow.
Click to expand...
Click to collapse
I'm sorry, I have been away from home. Just read this. Yes, you are fine if your phone is rooted. This Flash will remove Root. As mentioned in the First post, there is currently no way to root KitKat, (Unless I've missed something since last night). So root, then go to KitKat.
mjgspr95 said:
Downloads not working for me... 68% complete is furthest I've gotten. Tried seven or 8 times.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
Some people have issues with Internet Explorer on Mega Website. You might install Chrome or Firefox and try it that way, or use a Download Manager of your choice.
humblehyper said:
Success! after using this I called AT&T and they pushed me another small update then after that the kitkta update. I know there's no recovery available yet right?
Click to expand...
Click to collapse
That is Correct, no Custom Recovery. Not unless something has appeared since last night when I last went through the forums.
Usefull guide thanks
but i think there is not a difference between those Flash DLL i had 20130904 and just freshy flashed KitKat
also if anyone cares about a LG Flash tools "PASS" then while it stops on 80-94% and boot into OS itself, do a Factory Reset of phone and it will check a Factory Flag (it sets to 5) and gives message a PASS
Doesn't sound like an easy way!!!:what:
Sent from my Nexus S using Tapatalk
pcoruganti said:
Doesn't sound like an easy way!!!:what:
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Oh but indeed it is.
Sent from my LG-D800 using Tapatalk
Hi everyone, ( Newbie here)
Pardon me if something similar has already been posted before. I have major issues with my Nexus 5 which gave up on me a day back.
THe phone wont boot up and is stuck at the google logo.
I went through a few troubleshooting steps with the google technicians. We tried recovering it but that didn't work either, nor a hard reset. I dont see the dead android show up after which i can wipe the entire data and do a factory reset.
The USB Debugging feature on my phone was switched off so now if i try to unlock the bootloader using adb i can't. It says erasing but does nothing. I waited for about 25min and gave up on that.
I downloaded the stock android OS from the google website and also have adb and all the drivers installed.
Is there anyway i can get this thing up and running again? Anything at all?
Please help
fastbooting
Well the only thing I can come up with is to boot your phone into fastboot. First turn off your phone then press the power+volume down or power+volup+voldwn and then there should be a screen with an android laying on its back. If you can get that far well continue but if you can't then you can send in your phone
Sounds like you're trying to use adb commands when you should be using fastboot commands
Sent from my Android L Nexus 5 via Tapatalk
smackster said:
Well the only thing I can come up with is to boot your phone into fastboot. First turn off your phone then press the power+volume down or power+volup+voldwn and then there should be a screen with an android laying on its back. If you can get that far well continue but if you can't then you can send in your phone
Click to expand...
Click to collapse
I tried doing that but the recovery mode wont work. I only see a blank screen when i try to get into recovery mode. I dont care about my data anymore. I just hope for the phone to come back alive. How i wish the usb debugging was on
Usb debugging is irrelevant when the phone is off. If you hard power the phone off by holding power button for like 10 secs, try holding just volume down while powering up
Sent from my Android L Nexus 5 via Tapatalk
Ben36 said:
Sounds like you're trying to use adb commands when you should be using fastboot commands
Sent from my Android L Nexus 5 via Tapatalk
Click to expand...
Click to collapse
I'm sorry , i used this command
fastboot oem unlock
After that i saw
erasing. . .
Which went on for more than 25min and more. So i had to abort.
varunst said:
I'm sorry , i used this command
fastboot oem unlock
After that i saw
erasing. . .
Which went on for more than 25min and more. So i had to abort.
Click to expand...
Click to collapse
Try LG flashtool. That is your only hope. Link in my signature.
bitdomo said:
Try LG flashtool. That is your only hope. Link in my signature.
Click to expand...
Click to collapse
Could that void the warranty of my phone? I need the .dll file and the ROM or firmware whatever they call it for Nexus 5 32gb ( lg d820) I have downloaded the lg flash tool.
varunst said:
Could that void the warranty of my phone? I need the .dll file and the ROM or firmware whatever they call it for Nexus 5 32gb ( lg d820) I have downloaded the lg flash tool.
Click to expand...
Click to collapse
It could not void your warranty. This is how LG would reflash your phone. You will find lg flashtool, dll for D820 and the firmware for D820 32Gb in my lg flashtool thread. You have to use the converted firmware. Dont worry about that it is converted. It was tested by numerous people and never got any negative response.
bitdomo said:
It could not void your warranty. This is how LG would reflash your phone. You will find lg flashtool, dll for D820 and the firmware for D820 32Gb in my lg flashtool thread. You have to use the converted firmware. Dont worry about that it is converted. It was tested by numerous people and never got any negative response.
Click to expand...
Click to collapse
So i will need 3 things now..
1. LG Flash tool
2. The right .dll file
3. Firmware for D820 32gb NExus 5 (converted firmware )
Now i have to figure out how to use them
varunst said:
So i will need 3 things now..
1. LG Flash tool
2. The right .dll file
3. Firmware for D820 32gb NExus 5 (converted firmware )
Now i have to figure out how to use them
Click to expand...
Click to collapse
Yes, but you dont have to figure out anything . I have already figured out and made a thread about it. Just check my signature about LG flashtool. You will find the guide there.
bitdomo said:
Yes, but you dont have to figure out anything . I have already figured out and made a thread about it. Just check my signature about LG flashtool. You will find the guide there.
Click to expand...
Click to collapse
Btw my bootloader is locked. and USB debugging is off . Can i still go ahead?
varunst said:
Btw my bootloader is locked. and USB debugging is off . Can i still go ahead?
Click to expand...
Click to collapse
Sure. That is not a problem.
bitdomo said:
Sure. That is not a problem.
Click to expand...
Click to collapse
Cool i am going through the tutorial . Will keep you posted. Also i wanted to mention, i think some images on the tut have broken links.
Are the D820 DLL and Firmware files for 32 gb ? Does that matter?
bitdomo said:
Sure. That is not a problem.
Click to expand...
Click to collapse
What's the worst case scenario here?
Will Google still replace it for me?
varunst said:
What's the worst case scenario here?
Will Google still replace it for me?
Click to expand...
Click to collapse
Worst case scenario is that LG flashtool will stop with Erase command failed error. Google will replace your phone does not matter what happen.
bitdomo said:
Worst case scenario is that LG flashtool will stop with Erase command failed error. Google will replace your phone does not matter what happen.
Click to expand...
Click to collapse
I don't see a reason why i shouldn't try it then . Once i am done with all this i will have to install Android 4.4 on top of it right?
varunst said:
I don't see a reason why i shouldn't try it then . Once i am done with all this i will have to install Android 4.4 on top of it right?
Click to expand...
Click to collapse
You dont have to install anything to your phone. If lg flashtool will be successful then your phone will be like that when you first turned it on.
bitdomo said:
You dont have to install anything to your phone. If lg flashtool will be successful then your phone will be like that when you first turned it on.
Click to expand...
Click to collapse
The converted one says USE AT OWN RISK . Why so ? I will have to download the 32GB one right? One more question.. what are TOT's ? or TOT file? And there are 2 files inside the 32 GB one.. Which one should i download? The first or the 2nd?
THanks
varunst said:
The converted one says USE AT OWN RISK . Why so ? I will have to download the 32GB one right? One more question.. what are TOT's ? or TOT file?
THanks
Click to expand...
Click to collapse
I should remove the use at your own risk message since it have been confirmed that they dont do any trouble. Tot is the file format of the LG's firmware file format.
As promised,
here above you have some TOTs just created and only for Development use
This image files are been created in Stock bootloader locked mode, but should be the same as unlocked mode for sure.
V 10d TOTs
Stock FULL TOT -----> LINK
Stock System and boot partitions TOT -----> LINK
Stock only Recovery TOT -----> LINK
Stock only Boot Partitions TOT -----> LINK
Sick! Do these flash correctly though? Have you tested on your device?
Honestly Annoying said:
Sick! Do these flash correctly though? Have you tested on your device?
Click to expand...
Click to collapse
Still not Bro.
Waiting @tungkick to have a way to always go back, but i'm pretty sure if you flash only recovery TOT for example, you don't have any risk of brick nothing
wolfgart said:
Still not Bro.
Waiting @tungkick to have a way to always go back, but i'm pretty sure if you flash only recovery TOT for example, you don't have any risk of brick nothing
Click to expand...
Click to collapse
Alright, I am going to attempt to make a TOT with TWRP. Just need the TWRP file from @jcadduono
Honestly Annoying said:
Alright, I am going to attempt to make a TOT with TWRP. Just need the TWRP file from @jcadduono
Click to expand...
Click to collapse
He already posted it on his website a few pages back. Check it out
arjuna_ said:
He already posted it on his website a few pages back. Check it out
Click to expand...
Click to collapse
Oh damn, I'll check that out! Totally missed that, my bad
Wait. Is there a TWRP for the T-Mobile V20??...
stanleyopar2000 said:
Wait. Is there a TWRP for the T-Mobile V20??...
Click to expand...
Click to collapse
There is a twrp recovery.img, but it's not yet flashable.
What is @tungkick website where I can find all of this stuff? Looking forward to flashing everything in the near future.
stanleyopar2000 said:
Wait. Is there a TWRP for the T-Mobile V20??...
Click to expand...
Click to collapse
Yes, there seems to be one already, but as far as i know it is not flashable yet.
Look on this thread:
http://forum.xda-developers.com/v20...-stock-tot-t3484982/post69308906#post69308906
I have a bricked v20 and I have tried flashing this .tot and the other posted in this forum and I keep getting error messages at 9% on all attempts on two windows machines. Any ideas on what this issue could be? I am using LGUP version 1_14_3. Is this the latest build or the build compatible with the V20? Drivers were latest I could find also using the LG common.dll which I needed for LGUP to recognize the V20. This is my only way out of brick I think. Any suggestions would be greatly appreciated. Thanks
bud951 said:
I have a bricked v20 and I have tried flashing this .tot and the other posted in this forum and I keep getting error messages at 9% on all attempts on two windows machines. Any ideas on what this issue could be? I am using LGUP version 1_14_3. Is this the latest build or the build compatible with the V20? Drivers were latest I could find also using the LG common.dll which I needed for LGUP to recognize the V20. This is my only way out of brick I think. Any suggestions would be greatly appreciated. Thanks
Click to expand...
Click to collapse
mate, as of today, i have read that there is no dll file for the v20. i.e there is no updated dll file to recognise the v20 in lgup.
u might want to wait a bit longer before u can unbrick your phone.
frostmore said:
mate, as of today, i have read that there is no dll file for the v20. i.e there is no updated dll file to recognise the v20 in lgup.
u might want to wait a bit longer before u can unbrick your phone.
Click to expand...
Click to collapse
Not good news.. it is just the dll? I mean i knew it had to be a missing piece because it was ready to flash. Every file failed at the same time. If anyone hears anything please post here or PM me just for a heads up. Im sure a few other desperate souls out there are anxiously waiting. Any reason the flash tools are incomplete? It doesnt seem like a big deal. Can someone here in the forum make one? Just couious.. i would gladly donate. Thanks for the info.
bud951 said:
Not good news.. it is just the dll? I mean i knew it had to be a missing piece because it was ready to flash. Every file failed at the same time. If anyone hears anything please post here or PM me just for a heads up. Im sure a few other desperate souls out there are anxiously waiting. Any reason the flash tools are incomplete? It doesnt seem like a big deal. Can someone here in the forum make one? Just couious.. i would gladly donate. Thanks for the info.
Click to expand...
Click to collapse
I don't think the flash tool is meant to be public, so they are probably leaked files.
I have a soft bricked LG V20 and have tried the LGUP DLL for every LG phone model I could find. The most progress I got was with the LG G5 dll and it only went to 10%.
bud951 said:
Not good news.. it is just the dll? I mean i knew it had to be a missing piece because it was ready to flash. Every file failed at the same time. If anyone hears anything please post here or PM me just for a heads up. Im sure a few other desperate souls out there are anxiously waiting. Any reason the flash tools are incomplete? It doesnt seem like a big deal. Can someone here in the forum make one? Just couious.. i would gladly donate. Thanks for the info.
Click to expand...
Click to collapse
not really sure as i am new to LG.
been reading up on xda relating to flashing and rooting (i came from samdung phones) this baby. i think being patient here is what you can do at the moment.also, not only the dll file is missing, i read twrp is not saving backup properly due to the new security protocols in place android 7.0.
take heart mate,i know it sucks to have a bricked phone.
all im getting is "Unknown Model"
Managed to soft brick my H918 as well, so if anyone working on this needs a tester, I'd love to get my phone back.
Perion said:
Managed to soft brick my H918 as well, so if anyone working on this needs a tester, I'd love to get my phone back.
Click to expand...
Click to collapse
Check here
http://forum.xda-developers.com/v20/development/h918-stock-deodex-debloat-t3499423/page13
Sent from my Pixel XL using Tapatalk
alane708 said:
Check here
http://forum.xda-developers.com/v20/development/h918-stock-deodex-debloat-t3499423/page13
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
I appreciate it, wish I'd seen that the day before. I tried to go back to stock recovery to see if that would fix my boot loop issue, so, without access to TWRP, I'm hosed until we have a method to reflash recovery from Fastboot or Update modem connection..
I am screwed as well, I messed my phone up too, and when I turn my phone on it automatically goes the to the upgrade mode screen, I want to through away this damn phone, hehehe.