Hey guys, I recently found my tf300t tucked away somewhere. Haven't used it for absolute months! And I remembered why, I kept having problems with CM somehow(I believe the last update was somewhere in June-July of 2013), so this time after charging it and wanting to do it all again, I figured I'd get it updated. Seeing as it's been nearly a year and so much crap has changed, I figured something was going to go wrong. Before I even DID ANYTHING, I told the tablet to reboot into recovery mode, and boom that's where I'm stuck. The Tablet rebooted and now only shows the Asus boot screen... Nothing else! Vol down+pwr didn't work, nothing. And If I hold the power button it shuts off but then turns right back on 1-2 seconds later. I'm not sure what this is, a soft brick? a Brick? just an error? Can anybody please help? I know this is probably the wrong section, but I'm just frustrated.
Thank you to anybody who can help in any shape or form.
PS: no bashing is needed, my tables already bashing my head for me.
Amirocassar said:
Hey guys, I recently found my tf300t tucked away somewhere. Haven't used it for absolute months! And I remembered why, I kept having problems with CM somehow(I believe the last update was somewhere in June-July of 2013), so this time after charging it and wanting to do it all again, I figured I'd get it updated. Seeing as it's been nearly a year and so much crap has changed, I figured something was going to go wrong. Before I even DID ANYTHING, I told the tablet to reboot into recovery mode, and boom that's where I'm stuck. The Tablet rebooted and now only shows the Asus boot screen... Nothing else! Vol down+pwr didn't work, nothing. And If I hold the power button it shuts off but then turns right back on 1-2 seconds later. I'm not sure what this is, a soft brick? a Brick? just an error? Can anybody please help? I know this is probably the wrong section, but I'm just frustrated.
Thank you to anybody who can help in any shape or form.
PS: no bashing is needed, my tables already bashing my head for me.
Click to expand...
Click to collapse
Does it respond to being plugged into a computer? Try pressing the reset button and then doing the vol down to get into fastboot.
cmendonc2 said:
Does it respond to being plugged into a computer? Try pressing the reset button and then doing the vol down to get into fastboot.
Click to expand...
Click to collapse
Nope, but I am running W8 and I read that W8 kinda sucks for this sort of thing. Like you need W7 or XP? Correct me if im wrong. Any other ideas? . I didn't do anything! Just told it to reboot into recovery, and now I'm stuck there. I held pwr+volume down and it still keeps stuck, and if I try to power it off then it just turns on again a few seconds later.
Amirocassar said:
Nope, but I am running W8 and I read that W8 kinda sucks for this sort of thing. Like you need W7 or XP? Correct me if im wrong. Any other ideas? . I didn't do anything! Just told it to reboot into recovery, and now I'm stuck there. I held pwr+volume down and it still keeps stuck, and if I try to power it off then it just turns on again a few seconds later.
Click to expand...
Click to collapse
I have the same issue more or less...
Mine will not go into fastboot
kingrat said:
I have the same issue more or less...
Mine will not go into fastboot
Click to expand...
Click to collapse
I also have this issue
??
So none of you can get to fastboot or recovery, but you do all get the stuck at Asus logo?? All your bootloaders are unlocked?? All of you got to this spot, the same way by not using the tablet for long periods of time???? What bootloader are you on?? What version of CM are you running??? What is the OS of your PC, If its not the top 3 please be specific......Are you using a stock asus data cable??
Sounds similar
From what your posts say, it sounds like something i came across. I struggled for hours trying to figure out this dilemma, but if you're in the same situation i was in then as long as you're in that screen even after trying to hold the power and -vol let it sit there, plug in and make sure you have all your files associated with fastboot platform installed and try pushing the new TWRP ( http://www.androidfilehost.com/?fid=23329332407569892 ) to your tablet, for some reason after a certain update after 4.1 i believe? CWM stopped working for me, so try pushing the new TWRP from that link there and possibly you should be able to gain control of your tablet again and start installing the new packets for CM 11. I found this to be very helpful http://forum.xda-developers.com/showthread.php?t=2570965 and thanks to "cmendonc2", 6 post down, he really cleared things up with his simple links. Hope you're in the same boat as i was. Good luck
Related
Hey all
Before anyone mentions that i should be searching around more, i would like to say that i've been on multiple threads and they all state the same thing (use NVflash to flash CWM and then boot into CWM but the solution did not work for me past flashing CWM and then trying to access recovery after) and i wasn't able to find one that had a similar problem as mine.
I have CWM flashed through NVflash and was running CM7.1 RC1. I took a screenshot with the 'shootme' app and proceeded to look at the gallery to make sure it came out okay. The gallery crashed and i was sent to the home screen. I swiped to a different homescreen when my phone froze halfway through the transition to the next screen. No combination of buttons/long presses were able to get me out of it so i went ahead and did a battery pull. So my dilemma is that now i'm stuck at the LG boot logo with no blue status bar under it. It freezes there and will not do anything every time i boot up. volume down+power does not give me access to recovery nor does any other button combo get me past the LG boot logo.
Are there any other methods i might be able to use like ADB or what not to get myself out of this situation? or at least into recovery? Any comments or suggestions would be greatly appreciated as i've been searching for hours with little help and my eyes are starting to get strained.
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
If so.. do the nvflash again? Edit: Not sure if I would do this without getting further guidance tho..
schmit said:
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
Click to expand...
Click to collapse
This. I remember when I boot looped my phone I had the problem of letting go of the volume key too early, you need to hold down volume and power from a totally powered off phone until recovery actually starts and you see the green "android" logo of CWM.
Try re-flashing CWM, NVFlash CAN fail. There is literally nothing you can do within the OS that will prevent recovery from working. Either you did something wrong somewhere along the recovery process or you discovered an entirely new problem with the phone. I'm going to hazard a guess and say it's the former.
Thanks for the response guys. I wish that it was the case of not holding the buttons long enough. I have tried numerous times with the buttons held down for a long period of time. I even held the combo down for almost 5 minutes a few times.
Every time i try to boot up, it won't go past the LG boot screen so i would pull the battery out and go through flashing CWM through NVflash again. I'm sure I'm not missing anything because everything goes through and gets sent to the phone successfully.
I did happen to run into a thread that was closely similar to mine but his method was to just keep reflashing CWM and the stock recovery back and forth every time it failed until it turned on. I might have to try that if i cannot figure out this problem out soon. Not being able to use this phone is killing me! heh.
I just joined your club. Wow this sucks.
So apparently this is a whole new problem that's been found? Every other help thread seems to point to using NVflash or remaking the partitions due to a bad flash using an O2x based file instead of G2x.
But none of those solutions come close to doing anything. There has been some people with the same problem as me but aren't proactive at all enough to get someone's attention, so i'm guessing this problem is getting pushed to the side with people just going about getting their phones replaces/buying new ones.
I did happen to run into a thread on paulobrien/modaco's forum that had people using NVflash to get out of any sticky situation like this. It just reverts everything back to the stock factory settings but with root. We cannot use this though because he hasn't built it to be compatible with our LGP999's because everything was built for their UK LGP990's. Maybe that's a start to getting this solution fixed?
I hate to say this, bit you might have to call t mobile and get a replacement. Flash back to stock recovery and they won't know you messed with anything.
Sent from my Nexus 5g using XDA Ultimate App
Don't send back....you'll get same defacement a battery pull go into nvflah and go back stock then flash nv flash fix pArtitions
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Jduhb said:
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Click to expand...
Click to collapse
Did you ever find a solution to this issue? Because my phone is doing this...
I attempted to restore my phone back to the wrong backup that was from a galaxy sII (2.3.4 i think); needless to say, the restore failed. I then restarted my phone from CWM and it gets stuck at LG screen.
I have tried to NVflash back to stock; nothing. same thing reflashing back to CWM.
ideas?
have you tried this link out yet?
http://forum.xda-developers.com/showthread.php?t=1180331
same problem..... anybody find something to fix this yet?
From what I heard is that you need to remove the battery, then boot into recovery or something.
Sent from my G2X
Use smartflash for the p990 but only use the p999 ap.bin file which will put the rom and kernel back to stock p999.
Rom for recovery always fixes any soft brick back to stock 2.3.3 OTA. It's saved my phone multiple times from stuck on S/W screen to being stuck on lg logo or even the dreaded can't mount sdcard-cache errors in cwm.
Sent from my LG-P999 using xda premium
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
jcbofkc said:
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
Click to expand...
Click to collapse
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
sabotage99 said:
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
Click to expand...
Click to collapse
Glad for you that it worked.
Kwes1020 pointed me in the right direction last week. Be sure to give a thanks to ILUHA_89 who came up with the fix.
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
d12unk13astard said:
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
Click to expand...
Click to collapse
It's really not that big a deal. I was brand new to android once and asked all sorts of things.
I, like you, happen to read everything I can get my hands on. Some struggle going through all the info. I was here the day the forum opened, so I kind of remember where everything is.
Some are lazy and others just have no idea what the heck is going on and are intimidated by certain processes. I would rather help someone instead of listening to them ***** about their broken phone.
First i am totally new to android systems. I purchased a Curtis Klu 8025 tablet. My 4 year old somehow wiped out the operating system. I mean totally wiped it out. It power on, but NOTHING. i have tried the reset button. I have tried the holding power+volume buttons. Nothing happens. I am really needing to load some kind of OS on it. I just have no clue how to go about it. If it was a PC i would have had it fixed in no time. But i have no idea what rooting, flashing, or anything of that nature even means. I read a guide and I sort of understand that I need to load a Rom or something. However the Curtis company does not have any download or support online. I do not have a warranty. I just know there has to be something i can download and use my sd card to load it onto the tablet but I have not been able to find it. Please help me!
Sorry, just to clarify: when you say volume down buttons to enter download mode / recovery what exactly happens?
Sent from my GT-I9300
Something is wrong with the tablet. I doubt very seriously your 4 year-old wiped out the OS.
23Six said:
Sorry, just to clarify: when you say volume down buttons to enter download mode / recovery what exactly happens?
Sent from my GT-I9300
Click to expand...
Click to collapse
Nothing happens. It goes to the infotmic screen. and nothing.
Hello everybody,
I hope that someone can give me some advise to get my tf300t up and running again. I wanted to install cm10.2 but I wanted to install CWM first.
I unlocked my device first with the unlock app v8 from asus.
I tried to install CWM the first time but it did not work.
I went back into recovery mode but I wasn't paying attention and pressed wipe userdata
Now my tf300t only shows the ASUS logo and the text that the device is unlocked. I can't get back in recovery mode anymore. Is there a way the restore it back to default?
I hope that someone can help me out.
Thank you in advance for your time and effort.
Regards
Burner1977
burner1977 said:
Hello everybody,
I hope that someone can give me some advise to get my tf300t up and running again. I wanted to install cm10.2 but I wanted to install CWM first.
I unlocked my device first with the unlock app v8 from asus.
I tried to install CWM the first time but it did not work.
I went back into recovery mode but I wasn't paying attention and pressed wipe userdata
Now my tf300t only shows the ASUS logo and the text that the device is unlocked. I can't get back in recovery mode anymore. Is there a way the restore it back to default?
I hope that someone can help me out.
Thank you in advance for your time and effort.
Regards
Burner1977
Click to expand...
Click to collapse
Can you get to the menu with the recovery options, boot android, USB, and wipe data? You can use fastboot from there.
cmendonc2 said:
Can you get to the menu with the recovery options, boot android, USB, and wipe data? You can use fastboot from there.
Click to expand...
Click to collapse
thank you for your response. No I can't get in there. any suggestions?
thx for your advise
burner1977 said:
thank you for your response. No I can't get in there. any suggestions?
thx for your advise
Click to expand...
Click to collapse
If you cant get into there, you cant really use fastboot. Unless you made NvFlash Backups beforehand, I don't think there is much else you can do, since the recovery isn't working either.
cmendonc2 said:
If you cant get into there, you cant really use fastboot. Unless you made NvFlash Backups beforehand, I don't think there is much else you can do, since the recovery isn't working either.
Click to expand...
Click to collapse
I stupidly made no backups so what you are saying is that it is done.
burner1977 said:
I stupidly made no backups so what you are saying is that it is done.
Click to expand...
Click to collapse
I've spent a lot of time searching and it seems like that's it...
I'm on Asus screen, I can reboot it by either holding down pwr button until it reboots, or using reset switch with a paperclip. vol - does nothing, just reboots to asus screen...computer sees nothing. vol + goes into APX mode (blank screen)...computer detects with correct drivers. I've tried draining battery completely...disconnecting battery for a few days...same result.
If I had to speculate...maybe at some point someone will figure out how to use another's backup files and push them to the device in APX mode.
I've looked into replacing the motherboard...and have seen some for as low as 50$ on ebay. Personally, swapping them would be easy...but some may not have the caviler attitude with hardware swapping. Just gotta get the wife to agree to spend the $.
I'd die for a free fix, the kids really miss playing with the thing
coppervines said:
I've spent a lot of time searching and it seems like that's it...
I'm on Asus screen, I can reboot it by either holding down pwr button until it reboots, or using reset switch with a paperclip. vol - does nothing, just reboots to asus screen...computer sees nothing. vol + goes into APX mode (blank screen)...computer detects with correct drivers. I've tried draining battery completely...disconnecting battery for a few days...same result.
If I had to speculate...maybe at some point someone will figure out how to use another's backup files and push them to the device in APX mode.
I've looked into replacing the motherboard...and have seen some for as low as 50$ on ebay. Personally, swapping them would be easy...but some may not have the caviler attitude with hardware swapping. Just gotta get the wife to agree to spend the $.
I'd die for a free fix, the kids really miss playing with the thing
Click to expand...
Click to collapse
I'm on the same boat, this morning I was trying to install CyanogenMod following the instructions and wipped the tablet... I only have APX connection now with no backups...
Hi.
This phone was working perfectly and I left it to go away to another country so it must have discharged it's battery.
When I got back it would not turn on. Even after charging for a day, it will not turn on.
When I have the charging cable connected, it goes to Google Logo Screen and it loops (restarts over and over again)
There is no error message.
Picture is attached so please let me know what to do. It was a gift so no receipt to claim warranty.
Thanks for any help in advance.
joongpark said:
Hi.
This phone was working perfectly and I left it to go away to another country so it must have discharged it's battery.
When I got back it would not turn on. Even after charging for a day, it will not turn on.
When I have the charging cable connected, it goes to Google Logo Screen and it loops (restarts over and over again)
There is no error message.
Picture is attached so please let me know what to do. It was a gift so no receipt to claim warranty.
Thanks for any help in advance.
Click to expand...
Click to collapse
Try booting into stock recovery and clearing cache, reboot.
If that doesn't work then you'll have to unlock the bootloader (which wipes data) and try flashing the factory images. A guide for that can be found in the first link of my signature.
Lethargy said:
Try booting into stock recovery and clearing cache, reboot.
If that doesn't work then you'll have to unlock the bootloader (which wipes data) and try flashing the factory images. A guide for that can be found in the first link of my signature.
Click to expand...
Click to collapse
Thanks for the help...I am not sure If I am able to get into recovery more. Last time I tried, I was not able to.
Let you know once I try it.
Thanks.
Lethargy said:
Try booting into stock recovery and clearing cache, reboot.
If that doesn't work then you'll have to unlock the bootloader (which wipes data) and try flashing the factory images. A guide for that can be found in the first link of my signature.
Click to expand...
Click to collapse
I just tested and I am not able to get into recovery more...I am not sure what that mean. Should I connect Nexus to computer and see if it's recognized by computer and try to reload stock ROM?
Phone was never unlocked or flashed...it was in the same state as it was bought.
Can this be hardware problem? I saw some reports of similar thing happening with power button problem or other hardware problems.
joongpark said:
I just tested and I am not able to get into recovery more...I am not sure what that mean. Should I connect Nexus to computer and see if it's recognized by computer and try to reload stock ROM?
Phone was never unlocked or flashed...it was in the same state as it was bought.
Can this be hardware problem? I saw some reports of similar thing happening with power button problem or other hardware problems.
Click to expand...
Click to collapse
did you go into the bootloader, choose recovery, and it went to an android laying on its back?
This is the weirdest things...Spent days and days trying to bring it back to life and it would just reboot after GOOGLE logo. There was no way to get into recovery more.
I was looking around and someone said that tapping hard behind the power button with finger might bring it back and it did...so crazy. No matter what, I am a happy camper.
If you have tried everything, just try it...it behind power button and it might wake up the android that's been sleeping.
joongpark said:
This is the weirdest things...Spent days and days trying to bring it back to life and it would just reboot after GOOGLE logo. There was no way to get into recovery more.
I was looking around and someone said that tapping hard behind the power button with finger might bring it back and it did...so crazy. No matter what, I am a happy camper.
If you have tried everything, just try it...it behind power button and it might wake up the android that's been sleeping.
Click to expand...
Click to collapse
Can u explain how did u do that .what do u mean by behind the power button
I have the option to buy this device from a guy who has this problem and i have said to him to try the tips but not working. Computer does not see the device yet and thats logic since it just goes for 2-3 sec in bootloader he told me. Is this the power buttion failure or can it be fixed with nexus toolkit?
Price is €50 because of that and little damaged glass but i doubt if i can let it boot normal again.
Hello everyone
im in a little big dilema here.
i was on cm11 and i wanted to go back to stock,
so i tried to flash Retail brasil and the process failed at around the second step,
i believe it said something about tz signed.
i left my device there, then after the phone shut down i could no longer turn it on.
i tried the vol- and power and i got nothing, also the vol+ vol- and power and also nothing.
i cannot make my phone respond.
also battery was at around 80% so it does have battery.
im afraid i might of bricked it trying to go back to stock. xD
kind of funny.
has this happened top anyone?
help would be appreciated a ton.
hugodefcon said:
Hello everyone
im in a little big dilema here.
i was on cm11 and i wanted to go back to stock,
so i tried to flash Retail brasil and the process failed at around the second step,
i believe it said something about tz signed.
i left my device there, then after the phone shut down i could no longer turn it on.
i tried the vol- and power and i got nothing, also the vol+ vol- and power and also nothing.
i cannot make my phone respond.
also battery was at around 80% so it does have battery.
im afraid i might of bricked it trying to go back to stock. xD
kind of funny.
has this happened top anyone?
help would be appreciated a ton.
Click to expand...
Click to collapse
you are not bricked some partitions are not able to be downgraded such as tz just erase those lines from the xml file remove tz and gpt
billycar11 said:
you are not bricked some partitions are not able to be downgraded such as tz just erase those lines from the xml file remove tz and gpt
Click to expand...
Click to collapse
like i said i am not able to make the phone respond.
none of the button combinations do anything.
for i am not able to get to the bootloader or even see the booanimation or anything.
its weird how i got this happen to me when i was trying to go back to stock.
funny if you think of it.
hugodefcon said:
like i said i am not able to make the phone respond.
none of the button combinations do anything.
for i am not able to get to the bootloader or even see the booanimation or anything.
its weird how i got this happen to me when i was trying to go back to stock.
funny if you think of it.
Click to expand...
Click to collapse
when you plug it in does it just stay at a green led?
billycar11 said:
when you plug it in does it just stay at a green led?
Click to expand...
Click to collapse
there is no light.
:c
hugodefcon said:
there is no light.
:c
Click to expand...
Click to collapse
im sorry to hear that i think you may be bricked ,but don't lose hope maybe someone that knows more about these phones than me can help
Some questions that may help people help you if you can answer them:
Did you use an fxz with RSD Lite when you were trying to go back to stock? If so, where did you get it? If not, what procedure did you use? Which version of Android was it? 4.1.2?
Although to be honest, if you can't even get to fastboot, your chances aren't good. I've been in similar situations before and I was able to fix it because I could at least get into fastboot and start from scratch. You are sure power + volume buttons together isn't working?
killrhythm09 said:
Some questions that may help people help you if you can answer them:
Did you use an fxz with RSD Lite when you were trying to go back to stock? If so, where did you get it? If not, what procedure did you use? Which version of Android was it? 4.1.2?
Although to be honest, if you can't even get to fastboot, your chances aren't good. I've been in similar situations before and I was able to fix it because I could at least get into fastboot and start from scratch. You are sure power + volume buttons together isn't working?
Click to expand...
Click to collapse
i was using rsd lite
i was on cm11 and wanted to go to stock retail brasil. which is 4.1.2
i cannot reach fastboot or anything.
i sent it to my carrier, i am not under warranty since i got this phone on launch but they said they will see it they can do anything but wont replace it,
if its a no go i will take it to a cell shop where i think they know a little bit more of this type of situation, bricking flashing and stuff
hugodefcon said:
there is no light.
:c
Click to expand...
Click to collapse
for some reason my phone no shows a green led when connected to the computer and to the wall charger but only for a little while then it starts blinking.
but is there some option i could try?