Noobing.....how install jbx kernel - Motorola Atrix 2

Hey guys although I am not new to xda developers , I have certain doubt's regarding installing jbx kernel , I read the post by d trail and its little above the levels for an amateur . so p.s. help me in giving a guidance to install the kernel. I am using pacman 4.3 in sys1 and mokee 4.4.2 on sys3, he battery drain is too much in mokee gets down by 10% every hour so I want to try the kernel for power optimization....

Ahh... installing JBX kernel, this is an awesome procedure, thanks to AROMA installer, trust me, haha
Commonly we just use BMM to install the JBX.zip like installing a ROM.zip
But there're some exceptions.. for example: we can not flash JBX on non-kexec ROMs because of ICS kernel...

I think guide allready have on the jbx kernel thread

guruggk1988 said:
Hey guys although I am not new to xda developers , I have certain doubt's regarding installing jbx kernel , I read the post by d trail and its little above the levels for an amateur . so p.s. help me in giving a guidance to install the kernel. I am using pacman 4.3 in sys1 and mokee 4.4.2 on sys3, he battery drain is too much in mokee gets down by 10% every hour so I want to try the kernel for power optimization....
Click to expand...
Click to collapse
i think you have already installed BMM.
then take mokee 4.4.2 for example,
1. download the latest version of dtrail's kernal, or Shurikkb's (because it is verified that his kernal have better battery life, you can find in dtrail's post)
2. flash it like a ROM, (boot to BMM recovery, switch to system3, then install package from ..., no wipe, no clean)
3. then enjoy, for details, please read in the post

help
PhoenixNghi said:
Ahh... installing JBX kernel, this is an awesome procedure, thanks to AROMA installer, trust me, haha
Commonly we just use BMM to install the JBX.zip like installing a ROM.zip
But there're some exceptions.. for example: we can not flash JBX on non-kexec ROMs because of ICS kernel...
Click to expand...
Click to collapse
i read the faq's about the jbx kernel, i downloaded the jbx kernel installed it now, after that what should i do , i am unable to understand the procedure

guruggk1988 said:
i read the faq's about the jbx kernel, i downloaded the jbx kernel installed it now, after that what should i do , i am unable to understand the procedure
Click to expand...
Click to collapse
You did install it, right? So go to About and find Kernel version, you'll see JBX there

Issues with JBX 3.0
Hello,
I have another question regarding JBX. I am running the latest version of Gummy (M.1-02-19-14), which comes with JBX kernel already integrated. I have read good things about the latest version of JBX (02/27/14 build) and have been trying to install it over the old kernel. The times I manage to load the rom with the new kernel, I have no signal and the phone appears to be unable to recognize my sim card. I have tried unchecking the exposed framework and 10% battery fix in the installer without avail. Any help with installing this latest version of JBX would be greatly appreciated!

Hi, I'm relatively new here, I have many doubts about the JBX kernel. I do not understand the Aroma installer. Is there any option to dial in specific?
I have experienced some problems. Some sensors stopped working.

dguamache said:
Hi, I'm relatively new here, I have many doubts about the JBX kernel. I do not understand the Aroma installer. Is there any option to dial in specific?
I have experienced some problems. Some sensors stopped working.
Click to expand...
Click to collapse
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:

Hello_Motto said:
Hello,
I have another question regarding JBX. I am running the latest version of Gummy (M.1-02-19-14), which comes with JBX kernel already integrated. I have read good things about the latest version of JBX (02/27/14 build) and have been trying to install it over the old kernel. The times I manage to load the rom with the new kernel, I have no signal and the phone appears to be unable to recognize my sim card. I have tried unchecking the exposed framework and 10% battery fix in the installer without avail. Any help with installing this latest version of JBX would be greatly appreciated!
Click to expand...
Click to collapse
i guess u better stick to shurikkb 25/2 build , its awesone , even i faced issues with the 27/2 dtrail like no signal , but shruikkb is marvelous:good:

guruggk1988 said:
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Click to expand...
Click to collapse
Just click next til end?

dguamache said:
Just click next til end?
Click to expand...
Click to collapse
yep , if u want u can install the camera app moto x by ticking it and rest everything is same just go on clicking next:good:

guruggk1988 said:
yep , if u want u can install the camera app moto x by ticking it and rest everything is same just go on clicking next:good:
Click to expand...
Click to collapse
Thanks a lot!
I would like to know the specific meaning of each option, did a tutorial about the kernel?

dguamache said:
Thanks a lot!
I would like to know the specific meaning of each option, did a tutorial about the kernel?
Click to expand...
Click to collapse
Dude thats explained below the option..n there's a nice long thread about jbx kernel in the development section..
Sent from my MB865 using Tapatalk 2

devilhunter47 said:
Dude thats explained below the option..n there's a nice long thread about jbx kernel in the development section..
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I'll care.

guruggk1988 said:
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Click to expand...
Click to collapse
do you need to rename the custom kernel? the one ive got from git hub really boggled me a bit...Thx a bunch

Related

Cannot Install Custom Kernel

This is a strange problem that I only started to have once I installed Team Nekkid 7.2 RC dated 3/29.
I can flash the ROM no problem, wipe dalvik and fix permissions and I'm good to go without any issues. But if I flash the ROM, then either morfic or faux kernel, then gapps, when I go to wipe dalvik, all I get is a quick screen flash with no option to actually wipe dalvik.
I go back and wipe the overall cache completely, fix permissions, the reboot. I am now stuck at the morfic boot animation until i pull battery.
If i try to install a Faux kernel, same thing happens with dalvik, but gets stuck at the blue LG screen.
Once i battery pull and get back to CWM, i wipe everything, reflash ROM and gapps, wipe dalvik and fix permissions no problem and boot up into whatever ROM i choose.
EDIT: Went back and flashed Bionix 1.4.1 and was able to flash a Faux kernel and wipe dalvik. Booting up this ROM now.
I also have NO problem with ICS ROMS/kernels.
When you say NO PROBLEMS with ICS ROMs, does that include Google Maps and the stock browser working perfectly??
Which ICS ROMs have you tried? How is battery life?
Thanks!
Flash kernel last, and redownload the kernels!
Sent from my LG-P999 using xda premium
mt3g said:
Flash kernel last, and redownload the kernels!
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
I did all of that. I flashed the kernel before and after gapps but end up with the same result.
I have a feeling there is an issue with the CWM since I am constantly flashing roms/kernels and have never had these problems before. I'm at work so I cant use the Nvidia tool to flash CWM so I have to wait until I get home.
mariuscm said:
When you say NO PROBLEMS with ICS ROMs, does that include Google Maps and the stock browser working perfectly??
Which ICS ROMs have you tried? How is battery life?
Thanks!
Click to expand...
Click to collapse
I meant I have no problem flashing ICS roms and kernels.
mt3g said:
Flash kernel last, and redownload the kernels!
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
I usually just follow the instructions precisely by the OP. (Wiping/formatting, flashing rom, gapps, restart + let 10 min stand if required by OP) I have not installed another kernel that what the ROM has included. Should I try that? If yes, which one? I currently have EGB AOSP ICS 4.0.4
[UPDATE] Ok I got it now. Just read your last message
mariuscm said:
I usually just follow the instructions precisely by the OP. (Wiping/formatting, flashing rom, gapps, restart + let 10 min stand if required by OP) I have not installed another kernel that what the ROM has included. Should I try that? If yes, which one? I currently have EGB AOSP ICS 4.0.4
Click to expand...
Click to collapse
Short answer: yes, install a different ROM
Long answer: go to the developing section of the G2X forums and find out the info with the countless threads.
stevew84 said:
Short answer: yes, install a different ROM
Long answer: go to the developing section of the G2X forums and find out the info with the countless threads.
Click to expand...
Click to collapse
I've tried 3 different ICS roms and read hundreds of posts and found nothing that would fix the maps and browser issues. I guess I have to wait a bit more for the devs to work on them. Maybe the lack of drivers is the problem.
mariuscm said:
I've tried 3 different ICS roms and read hundreds of posts and found nothing that would fix the maps and browser issues. I guess I have to wait a bit more for the devs to work on them. Maybe the lack of drivers is the problem.
Click to expand...
Click to collapse
Look for Owain's Unnoficial Build 55 thread, and use Firefox browser, that is the most complete ICS ROM and Firefox doesnt have the rotation problem.
stevew84 said:
Look for Owain's Unnoficial Build 55 thread, and use Firefox browser, that is the most complete ICS ROM and Firefox doesnt have the rotation problem.
Click to expand...
Click to collapse
I was just downloading that ROM
Thanks!
My main concern is Google Maps not working properly. I rely on it in my job a lot and can't have it blanking out on me like that.
I've tried the replacement solution for the stock browser - I installed Dolphin HD. I'll try Firefox, though. Haven't used that on a phone since I had the Nokia N900 - Ah, the good times when I still believed in Nokia
Thanks for your help!
mariuscm said:
I was just downloading that ROM
Thanks!
My main concern is Google Maps not working properly. I rely on it in my job a lot and can't have it blanking out on me like that.
I've tried the replacement solution for the stock browser - I installed Dolphin HD. I'll try Firefox, though. Haven't used that on a phone since I had the Nokia N900 - Ah, the good times when I still believed in Nokia
Thanks for your help!
Click to expand...
Click to collapse
If the maps shows up and then goes blank, simply close the map and re-open it.
I know the close/reopen "trick," but I thought there might be a ROM that just has the Gmaps working. If there's none I'll just wait. Is Owain's unofficial 55 based on 4.0.4 ? I'm also going through his thread now in hopes of finding it. I'll probably just flash and see then.
mariuscm said:
I know the close/reopen "trick," but I thought there might be a ROM that just has the Gmaps working. If there's none I'll just wait. Is Owain's unofficial 55 based on 4.0.4 ? I'm also going through his thread now in hopes of finding it. I'll probably just flash and see then.
Click to expand...
Click to collapse
All the important information will be in the first post of his thread. he doesn't include a change log, though.
mariuscm said:
I know the close/reopen "trick," but I thought there might be a ROM that just has the Gmaps working. If there's none I'll just wait. Is Owain's unofficial 55 based on 4.0.4 ? I'm also going through his thread now in hopes of finding it. I'll probably just flash and see then.
Click to expand...
Click to collapse
Yes, it's 4.0.4 with all of the latest CM9 commits.
Sent from my LG-P999 using xda premium

JellyBean - JELLYTIME for DHD/Inspire4g - Beta 10 wifi problem

So after installing this amazing rom and loving it for a week or two; I see a kernel update and install it. Everything went smooth but I lost my wifi after the fact. I was hoping someone could help me keep the kernel and get the wifi going. nothing about wifi problems were stated and it work fine previously. I wiped everything and even tried the wifi fix manager thingy i got with the ics rom i was running previously to see if that would do it but to no avail. I wanted to ask the developer but need some 10 post so help a bro out!
p.s....gotta give props to the man who had me running jb before anyone of my friends with newer phones!!! RANDOMBLAME!!!!
bboygmoney said:
So after installing this amazing rom and loving it for a week or two; I see a kernel update and install it. Everything went smooth but I lost my wifi after the fact. I was hoping someone could help me keep the kernel and get the wifi going. nothing about wifi problems were stated and it work fine previously. I wiped everything and even tried the wifi fix manager thingy i got with the ics rom i was running previously to see if that would do it but to no avail. I wanted to ask the developer but need some 10 post so help a bro out!
p.s....gotta give props to the man who had me running jb before anyone of my friends with newer phones!!! RANDOMBLAME!!!!
Click to expand...
Click to collapse
ditto, this happend with my Paranoidandroid install as well. kernel allowed me to stay running without crash, but wifi is a pretty big letdown...
unfortunatly, without the kernel itself being fixed, or the wifi module fixed, we are stuck looking for another alternate kernel... oh yeah, we are pretty limited.
thanks
appreciate the quick reply man. And I'll be keeping my eye out then
bboygmoney said:
appreciate the quick reply man. And I'll be keeping my eye out then
Click to expand...
Click to collapse
found out a very possible reason . are you using his kernel with another system or is this all jt only? he mentioned something about kangbang changing drivers.
dakunesu said:
found out a very possible reason . are you using his kernel with another system or is this all jt only? he mentioned something about kangbang changing drivers.
Click to expand...
Click to collapse
So I'm only using it with jelly time or jb. I'm flashing the os then the kernel cuz the os installs its own. This is an updated kernel for the os.I'm thinking i should maybe wipe the cache partition after the the os then do the kernel but at the same time I would think that other problems would be happening if that was the issue. What do you think?
bboygmoney said:
So I'm only using it with jelly time or jb. I'm flashing the os then the kernel cuz the os installs its own. This is an updated kernel for the os.I'm thinking i should maybe wipe the cache partition after the the os then do the kernel but at the same time I would think that other problems would be happening if that was the issue. What do you think?
Click to expand...
Click to collapse
does the system function without the kernel update?
if it does, you might want to hold off on updating til the ROM updates for it.
dakunesu said:
found out a very possible reason . are you using his kernel with another system or is this all jt only? he mentioned something about kangbang changing drivers.
Click to expand...
Click to collapse
dakunesu said:
does the system function without the kernel update?
if it does, you might want to hold off on updating til the ROM updates for it.
Click to expand...
Click to collapse
It does. N You know I am not even sure what advantages I get from this updated kernel anyways lol but I want it!!
problem solved!
bboygmoney said:
It does. N You know I am not even sure what advantages I get from this updated kernel anyways lol but I want it!!
Click to expand...
Click to collapse
The ROM was updated and the kernel included in the update! Amazing rom , highly recommended especially with the updated kernel!

[Q] Paranoid android on Jb Leak?

hi im new in this forum, reading around and with other members help I think im ready to install a custom rom now, my phone is international and has JB leak 1, and in this thread http://forum.xda-developers.com/showthread.php?t=2050705 in the end the say that you can flash this rom being on this Jb leak, i thought it was only for ics kernel, how is that? does that rom has still the kexec issue with some random phones getting a black screen on boot or is it fix for everyone now? thanks for your help :laugh:
porraxeneize said:
hi im new in this forum, reading around and with other members help I think im ready to install a custom rom now, my phone is international and has JB leak 1, and in this thread http://forum.xda-developers.com/showthread.php?t=2050705 in the end the say that you can flash this rom being on this Jb leak, i thought it was only for ics kernel, how is that? does that rom has still the kexec issue with some random phones getting a black screen on boot or is it fix for everyone now? thanks for your help :laugh:
Click to expand...
Click to collapse
Only & only Kexec based ROM's can be installed directly on JB official (unofficial leak by wangghost) rest all ROM's are for ICS. I too would like to be clarified regarding the black screen kexec issue has been sorted across all kexec roms??
RAD7 said:
Only & only Kexec based ROM's can be installed directly on JB official (unofficial leak by wangghost) rest all ROM's are for ICS. I too would like to be clarified regarding the black screen kexec issue has been sorted across all kexec roms??
Click to expand...
Click to collapse
Yes, black screen issue has been sorted by JBX Kernel.
RAD7 said:
Only & only Kexec based ROM's can be installed directly on JB official (unofficial leak by wangghost) rest all ROM's are for ICS. I too would like to be clarified regarding the black screen kexec issue has been sorted across all kexec roms??
Click to expand...
Click to collapse
XploitMachine said:
Yes, black screen issue has been sorted by JBX Kernel.
Click to expand...
Click to collapse
wait so if I want I can install this rom http://forum.xda-developers.com/showthread.php?t=2050705 on JB leak 1? I just install BMM and the flash zip and its done? the JBX kernel to fix the kexec issue comes already with the rom or I have to install it manually?
porraxeneize said:
wait so if I want I can install this rom http://forum.xda-developers.com/showthread.php?t=2050705 on JB leak 1? I just install BMM and the flash zip and its done? the JBX kernel to fix the kexec issue comes already with the rom or I have to install it manually?
Click to expand...
Click to collapse
as long as your rooted, yes. install BMM, follow instructions in its thread, and flash ROM.
Black screen issue should be fixed without needing JBX.
MotoMudder77 said:
as long as your rooted, yes. install BMM, follow instructions in its thread, and flash ROM.
Black screen issue should be fixed without needing JBX.
Click to expand...
Click to collapse
porraxenieze, afaik a prerequisite of JBX is to be first on a kexec kernel. I u/s what 'MotoMudder' is saying but I am unsure how jbx plays in a multiboot environment, I mean if for ex if someone has stock unoffficial (official) JB leak on sys 1 and on sys 3 if one installs 4.3 kexec PA or say kexec 4.3 Slimbean & then flashes jbx, what happens??
RAD7 said:
porraxenieze, afaik a prerequisite of JBX is to be first on a kexec kernel. I u/s what 'MotoMudder' is saying but I am unsure how jbx plays in a multiboot environment, I mean if for ex if someone has stock unoffficial (official) JB leak on sys 1 and on sys 3 if one installs 4.3 kexec PA or say kexec 4.3 Slimbean & then flashes jbx, what happens??
Click to expand...
Click to collapse
JBX is kexec.
MotoMudder77 said:
JBX is kexec.
Click to expand...
Click to collapse
What I mean to say is in the JBX OP, it mentions before flashing JBX, phone needs to have a kexec ROM installed beforehand & only then jbx can be flashed.
RAD7 said:
What I mean to say is in the JBX OP, it mentions before flashing JBX, phone needs to have a kexec ROM installed beforehand & only then jbx can be flashed.
Click to expand...
Click to collapse
well yea, otherwise you'd be flashing a kernel to a ROM that doesnt support it.
flash ROM, then flash JBX to it.
MotoMudder77 said:
well yea, otherwise you'd be flashing a kernel to a ROM that doesnt support it.
flash ROM, then flash JBX to it.
Click to expand...
Click to collapse
im not sure if I understand, i mean, the only thing I ever did to my phone is update to the JB leak via rsdlite, and now I only want to flash the paranoid android rom, the JBX kernel I do not want it, but now I dont understand if it is required or not to use the rom and prevent the black screen kexec issue
MotoMudder77 said:
as long as your rooted, yes. install BMM, follow instructions in its thread, and flash ROM.
Black screen issue should be fixed without needing JBX.
Click to expand...
Click to collapse
ah okay did not saw this carefully, so I can install the rom on the jb leak 1, already rooted, just need to install bmm and flash
do i have to do the partition and install on system 3 or can i just install it, dont do the partition and install it on system 1?
porraxeneize said:
ah okay did not saw this carefully, so I can install the rom on the jb leak 1, already rooted, just need to install bmm and flash
do i have to do the partition and install on system 3 or can i just install it, dont do the partition and install it on system 1?
Click to expand...
Click to collapse
I would partition. JB ROM's are far from stable, and never will be without kernel source. Always nice to have a stable Daily driver on your phone to fall back on.
Sent from my MB865 using Tapatalk 2
MotoMudder77 said:
I would partition. JB ROM's are far from stable, and never will be without kernel source. Always nice to have a stable Daily driver on your phone to fall back on.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
mmm okay i guess, i will see it then, when i do the partition the systems 3 - 6 can only be 1gb max right? that means you only have that much to install on the internal memory? seems low..

Which 5.1 custom ROM is best

Hi folks
I am using ressurection remix v5.4 android 5.1 based custom ROM on my N5 for a couple of days and facing some bugs which are
1. When I change app drawer animation sometimes app icons don't show on the whole page.
2. When screen rotate sometimes notification keys don't appears.
3. Facebook messenger doesn't popup. I can't use when I am using another app.
4. Most of the time when I restart the phone, 'android is optimizing the apps xx of xx' appears.
And some other bugs those I can't remember right now.
So I decided to change the ROM but confused which one to choose.
My need is a stable custom ROM with some beneficial changes and most importantly with no bugs.
I really need your help folks.
Thanks
bpy13 said:
Hi folks
I am using ressurection remix v5.4 android 5.1 based custom ROM on my N5 for a couple of days and facing some bugs which are
1. When I change app drawer animation sometimes app icons don't show on the whole page.
2. When screen rotate sometimes notification keys don't appears.
3. Facebook messenger doesn't popup. I can't use when I am using another app.
4. Most of the time when I restart the phone, 'android is optimizing the apps xx of xx' appears.
And some other bugs those I can't remember right now.
So I decided to change the ROM but confused which one to choose.
My need is a stable custom ROM with some beneficial changes and most importantly with no bugs.
I really need your help folks.
Thanks
Click to expand...
Click to collapse
The one I like. Stock+root+xposed
bitdomo said:
The one I like. Stock+root+xposed
Click to expand...
Click to collapse
I had no idea about xposed as I m not very expert android user. after ur reply I googled it and liked the idea. But only one thing I don't want to loose is the USB storage support because I didn't find this on stock rom without using any app.
I've been running Cataclysm for a few weeks now
Combine that with ElementalX kernel and my phone has been rock solid, great battery life (some of the best I've seen out of it) and I couldn't be happier.
linkboy said:
I've been running Cataclysm for a few weeks now
Combine that with ElementalX kernel and my phone has been rock solid, great battery life (some of the best I've seen out of it) and I couldn't be happier.
Click to expand...
Click to collapse
Shall I download elementalX kernel separately or I will get it with cataclysm rom. And if I have to download it then is the installation process is as same as installing rom ?
bpy13 said:
Shall I download elementalX kernel separately or I will get it with cataclysm rom. And if I have to download it then is the installation process is as same as installing rom ?
Click to expand...
Click to collapse
Cataclysm rom uses stock kernel, you have to download ElemetalX separately. First flash rom and than flash kernel, but you don't have to wipe anyting before kernel flashing.
dimi3ye said:
Cataclysm rom uses stock kernel, you have to download ElemetalX separately. First flash rom and than flash kernel, but you don't have to wipe anyting before kernel flashing.
Click to expand...
Click to collapse
Thanx dimi3ye....last night I flashed the cm12 nightly caz I downloaded it before and installed the elementalx 2.10 stock/aosp version. Very much satisfied with the kernel as its giving me pretty good standby battery life though I m using the dt2w option and most importantly impressed with the sound gain option.
But still worried about custom ROM because cm12 launcher still has some bugs. So I need to know about cataclysm ROM what are the best picks of the ROM and the stability.
bpy13 said:
But still worried about custom ROM because cm12 launcher still has some bugs. So I need to know about cataclysm ROM what are the best picks of the ROM and the stability.
Click to expand...
Click to collapse
Cataclysm is based on factory images, so it is rock stable rom with excellent features. For me, Cataclysm is best rom so far.
dimi3ye said:
Cataclysm is based on factory images, so it is rock stable rom with excellent features. For me, Cataclysm is best rom so far.
Click to expand...
Click to collapse
Okay folk....let's try it....ohh another thing...if i flash cataclysm now will the kernel remain the same or it will flash to stock (sorry for the bad English and for the bothering bcoz I m new to android)
bpy13 said:
Okay folk....let's try it....ohh another thing...if i flash cataclysm now will the kernel remain the same or it will flash to stock (sorry for the bad English and for the bothering bcoz I m new to android)
Click to expand...
Click to collapse
Your curent kernel will be reflashed with kernel that comes with Cataclysm... Read first page on Cataclysm tread for flashing instructions, because latest version is sometimes just update (~ 30mb), and first you have to flash major, big version (~ 550mb) before that update...
dimi3ye said:
Your curent kernel will be reflashed with kernel that comes with Cataclysm... Read first page on Cataclysm tread for flashing instructions, because latest version is sometimes just update (~ 30mb), and first you have to flash major, big version (~ 550mb) before that update...
Click to expand...
Click to collapse
Lol....yeah I have that quantity of brain my friend......now I am downloading 21st march stable version of 5.1. Can i update latest updates over ota bcoz one of the last updates has in call proximity sensor option which is attractive.
bpy13 said:
Lol....yeah I have that quantity of brain my friend......now I am downloading 21st march stable version of 5.1. Can i update latest updates over ota bcoz one of the last updates has in call proximity sensor option which is attractive.
Click to expand...
Click to collapse
Sorry, I didn't mean to offend you... You have to flash updates via recovery.
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
dimi3ye said:
Sorry, I didn't mean to offend you... You have to flash updates via recovery.
Click to expand...
Click to collapse
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
bpy13 said:
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
Click to expand...
Click to collapse
Gapps are included in rom. Usually, just flash latest update, if something else is needed, there is a description.
dimi3ye said:
Gapps are included in rom. Usually, just flash latest update, if something else is needed, there is a description.
Click to expand...
Click to collapse
Thanx a lot
bpy13 said:
Thanx a lot
Click to expand...
Click to collapse
One more advice, don't use twrp 2.8.6.x because it have some issues, use 2.8.5.3 instead...
dimi3ye said:
One more advice, don't use twrp 2.8.6.x because it have some issues, use 2.8.5.3 instead...
Click to expand...
Click to collapse
I am on 2.8.5.2...is it OK??
And one more thing...can u tell me the difference between beta version vs stable of cataclysm?
bpy13 said:
I am on 2.8.5.2...is it OK??
And one more thing...can u tell me the difference between beta version vs stable of cataclysm?
Click to expand...
Click to collapse
2.8.5.2 is fine... stable release means that every feature works perfect, beta is also rockstable rom, but new added features might have small issues (usually everything works perfect). I always flash latest whether is stable or beta, never had issues.
dimi3ye said:
2.8.5.2 is fine... stable release means that every feature works perfect, beta is also rockstable rom, but new added features might have small issues (usually everything works perfect). I always flash latest whether is stable or beta, never had issues.
Click to expand...
Click to collapse
didn't download the beta which has proximity sensor speaker option.

[ISSIUE] My display has started to show opacity difects on the edges

Hi everyone!
My display has started to show a circle of washed-out colours on the edges and I don't know why. It has all started when I unlocked the bootloader and changed the stock rom with the sultanxda's rom. The problem persist with other rom's, not only his one, and I wanted to ask you if it is a problem tha I can fix myself or it is possible call the assistance and ask for a new opo.
this is a video mad by myself to explain better my problem
watch?v=F6O5yi3X68g
(put it on the end of youtube video. sorry the xda rules don't give me the permission to post the entire link because it's my first thread)
thank you for your attention and patience
regards
is it a new opo ,, did u purchase after oct 2015 ?
thepico said:
is it a new opo ,, did u purchase after oct 2015 ?
Click to expand...
Click to collapse
yes! it's a replacement after my first opo with touch screen problems
davilomb said:
yes! it's a replacement after my first opo with touch screen problems
Click to expand...
Click to collapse
well then your opo like many of us has the LG display casuing issues with roms based on sultans kernels ! do one thing . flash sultan and then lightning kernel by nikhil18 and get back to me if it solved the issue
or u can just install anyother rom like team exodus or something.. some rom which doesnt use sultans kernel sources
thepico said:
well then your opo like many of us has the LG display casuing issues with roms based on sultans kernels ! do one thing . flash sultan and then lightning kernel by nikhil18 and get back to me if it solved the issue
or u can just install anyother rom like team exodus or something.. some rom which doesnt use sultans kernel sources
Click to expand...
Click to collapse
are you sure it's consigliated to flash a thirty part firmware? because sultan in the first post suggest not to flash other firmwares
thepico said:
well then your opo like many of us has the LG display casuing issues with roms based on sultans kernels ! do one thing . flash sultan and then lightning kernel by nikhil18 and get back to me if it solved the issue
or u can just install anyother rom like team exodus or something.. some rom which doesnt use sultans kernel sources
Click to expand...
Click to collapse
davilomb said:
are you sure it's consigliated to flash a thirty part firmware? because sultan in the first post suggest not to flash other firmwares
Click to expand...
Click to collapse
yes fyi : a kernel not a firmware .. both are different things ! he has told not to flash because of other bugs which might come because of not using his kernel ! he only tested his kernel and suggests that ! but this causes problems with new opos ! so flash sultan and lightning kernel or flash some other rom if you dont want to flash lightning kernel
thepico said:
yes fyi : a kernel not a firmware .. both are different things ! he has told not to flash because of other bugs which might come because of not using his kernel ! he only tested his kernel and suggests that ! but this causes problems with new opos ! so flash sultan and lightning kernel or flash some other rom if you dont want to flash lightning kernel
Click to expand...
Click to collapse
sorry dude, you have right! my bad!
I'll try to follow your instruction the soon as possible and i'll referr you if the problem has fixed.
thank you!

Categories

Resources