Related
INSTALLED ICS PORT ON MY SG3 5801, BUT MY PHONE SWITCHING OFF AUTOMATICALLY
I Have Installed ICS Port on my Mobile Galaxy 3 GT-I5801
bt my fone is switching off when it sleeps
n getting prob during calls
Please Help me
n teleme how to install Build3 kernel for ICS build3..
here is the link from wer i got these file
http://forum.xda-developers.com/showthread.php?t=1374691
I have downloaded build3 bt didnt install kernel
Why this is happening please help !!!!
Thankyou
Like my teacher says, the answer is in the question.
Install the build 3 kernel and all the problems would be solved.
Hope this helps!
ak700 said:
Like my teacher says, the answer is in the question.
Install the build 3 kernel and all the problems would be solved.
Hope this helps!
Click to expand...
Click to collapse
He can install also Arakmar's hybrid kernel
facing a horrible lag even after installing arakmars kernel. after a day or so of working perfectly, when i unlock the phone the touchscreen doesn't respond for about two minutes, and while this goes away on reboot, i end up rebooting once a day to keep it working.
ak700 said:
Like my teacher says, the answer is in the question.
Install the build 3 kernel and all the problems would be solved.
Hope this helps!
Click to expand...
Click to collapse
I too have the same problem.
Where will i get the Kernel build 3?
How to flash it?
Pls help.
vkssreedharan said:
I too have the same problem.
Where will i get the Kernel build 3?
How to flash it?
Pls help.
Click to expand...
Click to collapse
Dude this post is five months old
Then I think we only had build 3
If you flash that kernel what is the point in having build 4
Flash build 4 and then try flashing g3mod or arakmar's one and your phone will be fine
Sent from my GT-I5800
Hey guys although I am not new to xda developers , I have certain doubt's regarding installing jbx kernel , I read the post by d trail and its little above the levels for an amateur . so p.s. help me in giving a guidance to install the kernel. I am using pacman 4.3 in sys1 and mokee 4.4.2 on sys3, he battery drain is too much in mokee gets down by 10% every hour so I want to try the kernel for power optimization....
Ahh... installing JBX kernel, this is an awesome procedure, thanks to AROMA installer, trust me, haha
Commonly we just use BMM to install the JBX.zip like installing a ROM.zip
But there're some exceptions.. for example: we can not flash JBX on non-kexec ROMs because of ICS kernel...
I think guide allready have on the jbx kernel thread
guruggk1988 said:
Hey guys although I am not new to xda developers , I have certain doubt's regarding installing jbx kernel , I read the post by d trail and its little above the levels for an amateur . so p.s. help me in giving a guidance to install the kernel. I am using pacman 4.3 in sys1 and mokee 4.4.2 on sys3, he battery drain is too much in mokee gets down by 10% every hour so I want to try the kernel for power optimization....
Click to expand...
Click to collapse
i think you have already installed BMM.
then take mokee 4.4.2 for example,
1. download the latest version of dtrail's kernal, or Shurikkb's (because it is verified that his kernal have better battery life, you can find in dtrail's post)
2. flash it like a ROM, (boot to BMM recovery, switch to system3, then install package from ..., no wipe, no clean)
3. then enjoy, for details, please read in the post
help
PhoenixNghi said:
Ahh... installing JBX kernel, this is an awesome procedure, thanks to AROMA installer, trust me, haha
Commonly we just use BMM to install the JBX.zip like installing a ROM.zip
But there're some exceptions.. for example: we can not flash JBX on non-kexec ROMs because of ICS kernel...
Click to expand...
Click to collapse
i read the faq's about the jbx kernel, i downloaded the jbx kernel installed it now, after that what should i do , i am unable to understand the procedure
guruggk1988 said:
i read the faq's about the jbx kernel, i downloaded the jbx kernel installed it now, after that what should i do , i am unable to understand the procedure
Click to expand...
Click to collapse
You did install it, right? So go to About and find Kernel version, you'll see JBX there
Issues with JBX 3.0
Hello,
I have another question regarding JBX. I am running the latest version of Gummy (M.1-02-19-14), which comes with JBX kernel already integrated. I have read good things about the latest version of JBX (02/27/14 build) and have been trying to install it over the old kernel. The times I manage to load the rom with the new kernel, I have no signal and the phone appears to be unable to recognize my sim card. I have tried unchecking the exposed framework and 10% battery fix in the installer without avail. Any help with installing this latest version of JBX would be greatly appreciated!
Hi, I'm relatively new here, I have many doubts about the JBX kernel. I do not understand the Aroma installer. Is there any option to dial in specific?
I have experienced some problems. Some sensors stopped working.
dguamache said:
Hi, I'm relatively new here, I have many doubts about the JBX kernel. I do not understand the Aroma installer. Is there any option to dial in specific?
I have experienced some problems. Some sensors stopped working.
Click to expand...
Click to collapse
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Hello_Motto said:
Hello,
I have another question regarding JBX. I am running the latest version of Gummy (M.1-02-19-14), which comes with JBX kernel already integrated. I have read good things about the latest version of JBX (02/27/14 build) and have been trying to install it over the old kernel. The times I manage to load the rom with the new kernel, I have no signal and the phone appears to be unable to recognize my sim card. I have tried unchecking the exposed framework and 10% battery fix in the installer without avail. Any help with installing this latest version of JBX would be greatly appreciated!
Click to expand...
Click to collapse
i guess u better stick to shurikkb 25/2 build , its awesone , even i faced issues with the 27/2 dtrail like no signal , but shruikkb is marvelous:good:
guruggk1988 said:
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Click to expand...
Click to collapse
Just click next til end?
dguamache said:
Just click next til end?
Click to expand...
Click to collapse
yep , if u want u can install the camera app moto x by ticking it and rest everything is same just go on clicking next:good:
guruggk1988 said:
yep , if u want u can install the camera app moto x by ticking it and rest everything is same just go on clicking next:good:
Click to expand...
Click to collapse
Thanks a lot!
I would like to know the specific meaning of each option, did a tutorial about the kernel?
dguamache said:
Thanks a lot!
I would like to know the specific meaning of each option, did a tutorial about the kernel?
Click to expand...
Click to collapse
Dude thats explained below the option..n there's a nice long thread about jbx kernel in the development section..
Sent from my MB865 using Tapatalk 2
devilhunter47 said:
Dude thats explained below the option..n there's a nice long thread about jbx kernel in the development section..
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I'll care.
guruggk1988 said:
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Click to expand...
Click to collapse
do you need to rename the custom kernel? the one ive got from git hub really boggled me a bit...Thx a bunch
What is the most stable ROM for C2104 ?
I just want something that works :crying:
Not even the stock 4.2.2 works well. I get bootloops and wifi issues on every ROM I try.
First - Do not cry because of phone .
Second - Re-Flash newest stock (I recommend you to do that by Flashtool)
Third - BL Unlock , Root , Install Philz
4th - Make compresses backup of stock (Nandroid settings like compression available only in philz)
5th - Then feel free to flash CM 12 and ThunderZap .
jakubekw1997 said:
First - Do not cry because of phone .
Second - Re-Flash newest stock (I recommend you to do that by Flashtool)
Third - BL Unlock , Root , Install Philz
4th - Make compresses backup of stock (Nandroid settings like compression available only in philz)
5th - Then feel free to flash CM 12 and ThunderZap .
Click to expand...
Click to collapse
I've done all that, except for the Philz Touch. I'm running CWM with CM 12.
Is there ThunderZap available for CM 12 beta 3 already?
Everything still unstable, though. It's beta as it says in the name.
I'm looking for something, solid. Rock solid. Everything working ,no problems, no crashes.
Yes . 4.10
Well , don't use CM 12 , cuz it's unstable in web browsing and video playing .
jakubekw1997 said:
Yes . 4.10
Well , don't use CM 12 , cuz it's unstable in web browsing and video playing .
Click to expand...
Click to collapse
No.. I usually get crashes doing simple stuff.
Wifi stops working very often.
Many functions are still being developed.
Even when choosing ringtones I've noticed that some names do not belong to the respective ringtone.
I understand that it's beta and I'm not complaining. It's just not what I want for now.
I've used beta ROMs many times. I've even developed some stuff for PSP years ago. But now I don't have the time for crashes and bug reports.
Even the stock ROMs give me often crashes.
Stock
i test ALL roms. but finally i undestand the stock rom is better for us. All KK roms have BIG BUG
mohsen8710 said:
i test ALL roms. but finally i undestand the stock rom is better for us. All KK roms have BIG BUG
Click to expand...
Click to collapse
You mean 4.1, right? Because I got many crashes from stock 4.2
gmsalomao2 said:
You mean 4.1, right? Because I got many crashes from stock 4.2
Click to expand...
Click to collapse
no i mean the last one. and there is no crashes
mohsen8710 said:
no i mean the last one. and there is no crashes
Click to expand...
Click to collapse
I was using version 15.3.A.1.17. Customized from India, from Brazil and I've also tried 15.3.A.1.14 from Vivo_BR.
They all gave me sudden reboots.
Do you know how to fix that or which ROM works?
gmsalomao2 said:
What is the most stable ROM for C2104 ?
I just want something that works :crying:
Not even the stock 4.2.2 works well. I get bootloops and wifi issues on every ROM I try.
Click to expand...
Click to collapse
I've been using SlimKat for almost 3 months and I have no major bugs at all. Wifi and GPS work fine, I have no random freezes or reboots, no low volume bug...
There are only two problems that I can remember now: unable to move apps to SD card and error trying to search for networks manually.
gmsalomao2 said:
I was using version 15.3.A.1.17. Customized from India, from Brazil and I've also tried 15.3.A.1.14 from Vivo_BR.
They all gave me sudden reboots.
Do you know how to fix that or which ROM works?
Click to expand...
Click to collapse
i have never seen reboots on my divice
I think last update of 4.2 was most stable..... Proximity sensor was major bug in that
mohsen8710 said:
i have never seen reboots on my divice
Click to expand...
Click to collapse
What ROM do you use?
gmsalomao2 said:
What ROM do you use?
Click to expand...
Click to collapse
till week ago Stock 17.
and for one week cm11
Hi folks
I am using ressurection remix v5.4 android 5.1 based custom ROM on my N5 for a couple of days and facing some bugs which are
1. When I change app drawer animation sometimes app icons don't show on the whole page.
2. When screen rotate sometimes notification keys don't appears.
3. Facebook messenger doesn't popup. I can't use when I am using another app.
4. Most of the time when I restart the phone, 'android is optimizing the apps xx of xx' appears.
And some other bugs those I can't remember right now.
So I decided to change the ROM but confused which one to choose.
My need is a stable custom ROM with some beneficial changes and most importantly with no bugs.
I really need your help folks.
Thanks
bpy13 said:
Hi folks
I am using ressurection remix v5.4 android 5.1 based custom ROM on my N5 for a couple of days and facing some bugs which are
1. When I change app drawer animation sometimes app icons don't show on the whole page.
2. When screen rotate sometimes notification keys don't appears.
3. Facebook messenger doesn't popup. I can't use when I am using another app.
4. Most of the time when I restart the phone, 'android is optimizing the apps xx of xx' appears.
And some other bugs those I can't remember right now.
So I decided to change the ROM but confused which one to choose.
My need is a stable custom ROM with some beneficial changes and most importantly with no bugs.
I really need your help folks.
Thanks
Click to expand...
Click to collapse
The one I like. Stock+root+xposed
bitdomo said:
The one I like. Stock+root+xposed
Click to expand...
Click to collapse
I had no idea about xposed as I m not very expert android user. after ur reply I googled it and liked the idea. But only one thing I don't want to loose is the USB storage support because I didn't find this on stock rom without using any app.
I've been running Cataclysm for a few weeks now
Combine that with ElementalX kernel and my phone has been rock solid, great battery life (some of the best I've seen out of it) and I couldn't be happier.
linkboy said:
I've been running Cataclysm for a few weeks now
Combine that with ElementalX kernel and my phone has been rock solid, great battery life (some of the best I've seen out of it) and I couldn't be happier.
Click to expand...
Click to collapse
Shall I download elementalX kernel separately or I will get it with cataclysm rom. And if I have to download it then is the installation process is as same as installing rom ?
bpy13 said:
Shall I download elementalX kernel separately or I will get it with cataclysm rom. And if I have to download it then is the installation process is as same as installing rom ?
Click to expand...
Click to collapse
Cataclysm rom uses stock kernel, you have to download ElemetalX separately. First flash rom and than flash kernel, but you don't have to wipe anyting before kernel flashing.
dimi3ye said:
Cataclysm rom uses stock kernel, you have to download ElemetalX separately. First flash rom and than flash kernel, but you don't have to wipe anyting before kernel flashing.
Click to expand...
Click to collapse
Thanx dimi3ye....last night I flashed the cm12 nightly caz I downloaded it before and installed the elementalx 2.10 stock/aosp version. Very much satisfied with the kernel as its giving me pretty good standby battery life though I m using the dt2w option and most importantly impressed with the sound gain option.
But still worried about custom ROM because cm12 launcher still has some bugs. So I need to know about cataclysm ROM what are the best picks of the ROM and the stability.
bpy13 said:
But still worried about custom ROM because cm12 launcher still has some bugs. So I need to know about cataclysm ROM what are the best picks of the ROM and the stability.
Click to expand...
Click to collapse
Cataclysm is based on factory images, so it is rock stable rom with excellent features. For me, Cataclysm is best rom so far.
dimi3ye said:
Cataclysm is based on factory images, so it is rock stable rom with excellent features. For me, Cataclysm is best rom so far.
Click to expand...
Click to collapse
Okay folk....let's try it....ohh another thing...if i flash cataclysm now will the kernel remain the same or it will flash to stock (sorry for the bad English and for the bothering bcoz I m new to android)
bpy13 said:
Okay folk....let's try it....ohh another thing...if i flash cataclysm now will the kernel remain the same or it will flash to stock (sorry for the bad English and for the bothering bcoz I m new to android)
Click to expand...
Click to collapse
Your curent kernel will be reflashed with kernel that comes with Cataclysm... Read first page on Cataclysm tread for flashing instructions, because latest version is sometimes just update (~ 30mb), and first you have to flash major, big version (~ 550mb) before that update...
dimi3ye said:
Your curent kernel will be reflashed with kernel that comes with Cataclysm... Read first page on Cataclysm tread for flashing instructions, because latest version is sometimes just update (~ 30mb), and first you have to flash major, big version (~ 550mb) before that update...
Click to expand...
Click to collapse
Lol....yeah I have that quantity of brain my friend......now I am downloading 21st march stable version of 5.1. Can i update latest updates over ota bcoz one of the last updates has in call proximity sensor option which is attractive.
bpy13 said:
Lol....yeah I have that quantity of brain my friend......now I am downloading 21st march stable version of 5.1. Can i update latest updates over ota bcoz one of the last updates has in call proximity sensor option which is attractive.
Click to expand...
Click to collapse
Sorry, I didn't mean to offend you... You have to flash updates via recovery.
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
dimi3ye said:
Sorry, I didn't mean to offend you... You have to flash updates via recovery.
Click to expand...
Click to collapse
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
bpy13 said:
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
Click to expand...
Click to collapse
Gapps are included in rom. Usually, just flash latest update, if something else is needed, there is a description.
dimi3ye said:
Gapps are included in rom. Usually, just flash latest update, if something else is needed, there is a description.
Click to expand...
Click to collapse
Thanx a lot
bpy13 said:
Thanx a lot
Click to expand...
Click to collapse
One more advice, don't use twrp 2.8.6.x because it have some issues, use 2.8.5.3 instead...
dimi3ye said:
One more advice, don't use twrp 2.8.6.x because it have some issues, use 2.8.5.3 instead...
Click to expand...
Click to collapse
I am on 2.8.5.2...is it OK??
And one more thing...can u tell me the difference between beta version vs stable of cataclysm?
bpy13 said:
I am on 2.8.5.2...is it OK??
And one more thing...can u tell me the difference between beta version vs stable of cataclysm?
Click to expand...
Click to collapse
2.8.5.2 is fine... stable release means that every feature works perfect, beta is also rockstable rom, but new added features might have small issues (usually everything works perfect). I always flash latest whether is stable or beta, never had issues.
dimi3ye said:
2.8.5.2 is fine... stable release means that every feature works perfect, beta is also rockstable rom, but new added features might have small issues (usually everything works perfect). I always flash latest whether is stable or beta, never had issues.
Click to expand...
Click to collapse
didn't download the beta which has proximity sensor speaker option.
Q&A for [KERNEL][ALPHA][LP 5.1]CyanogenMod 12.1 Kernel with DoubleTap2Wake
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][ALPHA][LP 5.1]CyanogenMod 12.1 Kernel with DoubleTap2Wake. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bootloop after flashing. Help!
Need some help. I have installed this kernel on CM 12.1 Rohan's build and got bootloop... Some info: I used Philz Touch 6 Fota and wiped cache and dalvic after flash. I recovered from soft brick through but what should I do to avoid bootloop?
File
Sorry for the dumb question but what is zip dl-0? cant flash it, it wont detect it.
Good day. First off, i wanted to say that i've tried this kernel and the d2w is very helpful for preserving the hw power button and i think this kernel is very useful.
The thing is, since their latest releases, i've found that Glade Rom and SlimLP have been the roms that are best for me in terms of what i need and my daily usage. Unfortunately, this kernel doesn't work for either of them. I'm guessing it's because of their base?
Anyway, i'd like to ask if the dev has any plans to get this kernel working for either of those roms or for aosp 5.1.1 roms in general? If yes, that would be awesome. If not, then i still say this kernel's features are still very helpful and i'll be waiting to get a cm-based rom that works for my needs. ?
cascabel said:
Good day. First off, i wanted to say that i've tried this kernel and the d2w is very helpful for preserving the hw power button and i think this kernel is very useful.
The thing is, since their latest releases, i've found that Glade Rom and SlimLP have been the roms that are best for me in terms of what i need and my daily usage. Unfortunately, this kernel doesn't work for either of them. I'm guessing it's because of their base?
Anyway, i'd like to ask if the dev has any plans to get this kernel working for either of those roms or for aosp 5.1.1 roms in general? If yes, that would be awesome. If not, then i still say this kernel's features are still very helpful and i'll be waiting to get a cm-based rom that works for my needs. ?
Click to expand...
Click to collapse
Doesn't work in the sense?
I have plans to bring this to every LP based ROM for XL.
I guess there might be some kernel related change. I will see to it.
corphish said:
Doesn't work in the sense?
I have plans to bring this to every LP based ROM for XL.
I guess there might be some kernel related change. I will see to it.
Click to expand...
Click to collapse
bootloops. even through a clean install or flashing it after an install and clearing dalvik and cache...
i've noticed that the roms that doesn't work with tz 4.15 won't work with this kernel either.
great to hear your plans. really appreciate it.
edit:
both these roms are aosp based and have RRO supported as opposed to cm theme engine. could that have any bearing on it? let me know how i can help.
Problem on my HTC One (M7)
Hello,
first of all I would like to apologize for my English problems. I installed your Kernel on my HTC ONE M7. It is running on Cyanogenmod 12.1 (Android 5.1.1). The problem is that my handy freezes everytime it tries to boot. It freezes on the HTC logo to be more specific. Please let me know if you need to know more details or need even a log and I hope this issue gets solved.
Thank you
usb619 said:
Hello,
first of all I would like to apologize for my English problems. I installed your Kernel on my HTC ONE M7. It is running on Cyanogenmod 12.1 (Android 5.1.1). The problem is that my handy freezes everytime it tries to boot. It freezes on the HTC logo to be more specific. Please let me know if you need to know more details or need even a log and I hope this issue gets solved.
Thank you
Click to expand...
Click to collapse
LOL No, this kernel is not meant for HTC One.
This kernel is only for Sony Xperia L. Please read the full post before trying anything.
Now how to recover? If you are able to go in recovery, flash CM12 or any custom ROM.
Master Solution is flashing stock as always, although I dont know how things are done for HTC [emoji14]
@corphish i kniw i shouldn't but.. If it's possible, may i ask that you add the Intelliactive scheduler if you can? Lulzactive and on demand doesn't really work for me (lulzactive seemed buggy last time i tried it - main core stayed on max freq). Just a request. ?
Wifi stopped working after I flashed this kernel. Previously I was on Tz 4.16. Any ideas what I can do fix this, other than going back to Tz?
primemonitor said:
Wifi stopped working after I flashed this kernel. Previously I was on Tz 4.16. Any ideas what I can do fix this, other than going back to Tz?
Click to expand...
Click to collapse
Well, you cannot go back to TZ now. It flashes kernel in boot-device linked partition, which is a mystery partition about which only Varun knows.
I haven't succeeded in your situation.
Sent from my C2104 using Tapatalk
corphish said:
Well, you cannot go back to TZ now. It flashes kernel in boot-device linked partition, which is a mystery partition about which only Varun knows.
I haven't succeeded in your situation.
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
Right, learned that the hard way
Is this a known issue though, or something that you or others have previously faced, that changing from Tz to Zapdos will break wifi? Just curious.
Hey man, I use Primexperia rom, it's CM12 based, soon to be posted new ver CM12.1 based. For some reasons it's not compatible with TZ 4.16, 4.14 only (wi fi missing on 4.16) Will this kernel work for me? The only thing I really need is a stable system with Sony sound
Oh almost forgot, I use TWRP and I think that any other recovery is a waste of time, to be honest. Can I use TWRP?
illague said:
Hey man, I use Primexperia rom, it's CM12 based, soon to be posted new ver CM12.1 based. For some reasons it's not compatible with TZ 4.16, 4.14 only (wi fi missing on 4.16) Will this kernel work for me? The only thing I really need is a stable system with Sony sound
Oh almost forgot, I use TWRP and I think that any other recovery is a waste of time, to be honest. Can I use TWRP?
Click to expand...
Click to collapse
I tried, breaks network .
Sent from my C2104 using Tapatalk
corphish said:
I tried, breaks network .
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
Stryder modded the rom while he had TZ installed ... I dont get why but thats it... Flash TZ4.15 and then TZ4.16
Sent from my Xperia T using XDA Free mobile app
Stryflex LP 1.5 Rom
Hi,
I am using Stryflex LP 1.5 Rom.
When used the its kernel,phone freezes randomly & hangs & not responds.
We have to take out battery & restart phone.
Most of the times even if i take out from pocket also it is in DeadState(even if pressed power button alos nothing works.)
So i installed Thunderzap 4.16 ,it is not freezing but Wifi is not working.
Then i shifted to your kernel, thank god it is not at all freezing while operating .
But i noticed that it is going to black screen/Dead State very frequently.
Waiting for any suggestions & help.
I appreciate your help & time.
Could we get 1.7~ OC like in TZ kernel? It was fully stable for me even with thermal throttling disabled.
Maybe it's noob but would the wake up signatures Hurt the touchscreen some how.
I mean it well make it work for 24 hour????
Tz 4.16 with cm 12 work properly and Wi-Fi is goog and with application tenderzap control you can Cheng setting so good and you can change control charge to 2100 ma for faster charging so download tanderzap control.apk
Sent from my C2105 using Tapatalk
---------- Post added at 08:48 PM ---------- Previous post was at 08:45 PM ----------
After installing rom should install tanderzap.zip with via recovery for resolve Wi-Fi problem
Sent from my C2105 using Tapatalk