Hello,
I have HCL V1 tablet and I flashed CWM Recovery 5.0.2.8 on it. Using the command
dd if=/mnt/sdcard/recovery.img of=/dev/block/mmcblk0p3
I used mtdblock3 instead of mmcblk0p3 as i don't have mmcblk0p3 file in /dev/block folder.
I booted into CWM recovery mode and I got the following errors:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/ last log
I tried to do Wipe data/factory reset and Wipe Cache in CWM recovery mode . Everything was done successfully.
After it I booted normally, but nothing was wiped, everything was as it is.
I also tried to flash a custom rom and it was flashed successfully but when i rebooted I WAS SHOCKED.:crying::crying:
my rom was not flashed and i got the sucking stock rom.
I also flashed different CWM recoveries like 5.0.2.6 & 5.0.2.7 but when i try to boot into recovery mode my tablet hangs on boot screen. So I flashed 5.0.2.8.
XDA DEVELOPERS gave me lot of knowledge about Android, Rooting, Flashing......so on.
I know i will get my answer HERE:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
My device Details:
Company: HCL
Brand: Me Tablet
Model: V1
Android OS: 4.0.4 (ICS)
Ram: 1 GB DR3
CPU: 1Ghz Cortex A8 (vimicro based)
Recovery: CWM Recovery based on 5.0.2.8
great work buddy can you give a link of the file you used cause i have flashed many cwm recovery images but non of them worked on my hcl me v1 tab
CWM Recovery Link
amreshlenka said:
great work buddy can you give a link of the file you used cause i have flashed many cwm recovery images but non of them worked on my hcl me v1 tab
Click to expand...
Click to collapse
hi...
Here is a link for CWM Recovery (5.0.2.8):
Check your PM..(XDA not allowing me)
=>After downloading extract Port-HCL.7z.
=>you will get recovery.img
=>Put it in internal storage (NOT IN ANY FOLDER)
=>Open Terminal Emulator, type following commands:
su
dd if=/mnt/sdcard/recovery.img of=/dev/block/mtdblock3
Bro you will get CWM Recovery 5.0.2.8. But its not working any more as you read in my post.
If you know anything about any other recovery like TWRP/CWM recovery...plz give me..
Any plz help.....how can i make cwm recovery for this device....
Sent from my Micromax A110 using XDA Premium 4 mobile app
I started building cwm recovery for hcl v1...
But i m getting errors....
So plz help me.....
Thanx
Send by a GROWING N00b
:thumbdown::thumbdown:
Made One Sucessful one
Hi guys i joined xda just few days ago and ported one cwm for HCL Me v1 and working Sucessfully just one prob. E: Can't mount /Cache/recovery/last_log
Tell Me how can i post my build I will like to share. Wiping Flashing every thing even advanced menu is fully working but only error i mentioned that is blocking the backup
Answer
amreshlenka said:
great work buddy can you give a link of the file you used cause i have flashed many cwm recovery images but non of them worked on my hcl me v1 tab
Click to expand...
Click to collapse
Have a look here
http://forum.xda-developers.com/che...-tablet-v1-t3349431/post66137570#post66137570
Did a mistake! Tried to increase internal memory in my micromax doodle2 which is a clone of Iceberg. After performing the steps my phone is on boot loop. Im having MERE 1.2 rom and CWM V 5.5.0.4. Now I am unable to mount any partition in CWM.So unable to restore from nandroid backup also which is in the Internal SD card. Not able to mount any partition in CWM. Please help!!!!
Cant post the link I followed since I am a newbie here!! Devs please help
I made the same mistake and now the phone cannot mount any partition in cwm. Have you found a solution. Please share how you solved your problem.
abduswamad said:
Did a mistake! Tried to increase internal memory in my micromax doodle2 which is a clone of Iceberg. After performing the steps my phone is on boot loop. Im having MERE 1.2 rom and CWM V 5.5.0.4. Now I am unable to mount any partition in CWM.So unable to restore from nandroid backup also which is in the Internal SD card. Not able to mount any partition in CWM. Please help!!!!
Cant post the link I followed since I am a newbie here!! Devs please help
Click to expand...
Click to collapse
did you tried to flash stock rom back to your phone using sp tools
Stucking in same problem bro.
Hey frnds i hv done the same mistake. i was installing new rom in my canvas doodle 2 with cwm recovery 5.0 etc. and now the result is my phone is just showing the micromax logo on the screen. it is starting in recovery mode but not in factory mode. it is also not mounting internal sd card and i have tried to connect pendrive with it with the help of otg wire but is not showing in the phone. so plz frnd if anybody can help or show me any way how i'll solve this problem. i will be very thankful to him. plzzzzzzzzzzzz guys help me out.
tushargupta said:
did you tried to flash stock rom back to your phone using sp tools
Click to expand...
Click to collapse
Hello, I tried to install my stock rom on my micromax a240 doodle 2 using sp tools. But it never worked. I followed all the steps correctly. Is there another alternative for flashing stock rom?
abduswamad said:
Did a mistake! Tried to increase internal memory in my micromax doodle2 which is a clone of Iceberg. After performing the steps my phone is on boot loop. Im having MERE 1.2 rom and CWM V 5.5.0.4. Now I am unable to mount any partition in CWM.So unable to restore from nandroid backup also which is in the Internal SD card. Not able to mount any partition in CWM. Please help!!!!
Cant post the link I followed since I am a newbie here!! Devs please help
Click to expand...
Click to collapse
flash the stock backup via sp flash tool. To increase internal memory, try the method in the video below
Hi guys.....i have tried to install a cwm recovery on this phone for quite a while....the devices having no official cwm.....i made it with mtkdroid tools....but it would end with an error saying failed to write to block device....so i tried to flash the cwm via sp flashtool....again it failed saying error img dl sign-header not found....i guess that meant that the recovery was not signed hence it cant be flashed...i tried to dd the img via terminal emulator and the process would be a success only to find that the phone cant boot neither enter recovery mode......the latter is already fixded...but the cwm still is not my recovery....plz help me in doing this.... The phone has a MT6572 SOC chip....and its not mtd........and the recovery partition is squeezed in a mmcblk0 partition which has alot of stuff going on....
Hi,
Thanks for using XDA Assist if cwm is for your device specific then contact developer of that cwm who released .. if you are trying to install CWM from other device then do not do so you will end up bricking your device to unrecoverable state ..
Good Luck!
I use Android one it is rooted when i flashed twrp form my phone and i go to recovery mode it says recovery mode below but then just tge logo and doesn't go ahead.
When i did this with pc i used adb to flash recovery and i booted recovery without rebooting onto system it got an error unable to mount /data and stuck there till i flashed new rom.
Can anyone help me install TWRP without errors.
Hello and welcome to Assist
The procedure to install TWRP for your device is same as CWM so follow the instructions posted here
https://forum.xda-developers.com/cr...covery-clockworkmod-recovery-6-0-5-1-t2885736
If you have further questions or want to post in the main forums you'll need to register an account first
Good luck
Here are few names which have same cpu as LYF F1 i.e. Qualcomm Snapdragon 617 Processor:
Alcatel Idol 4,Sharp Aquos 507SH,Kyocera DuraForce Pro,Huawei G9 Lite,ZTE ZMax Pro,BlackBerry DTEK50,ZTE Axon Max,HTC One A9,ZTE Axon 7 Mini,Nubia Z11 Mini,Coolpad Max,Samsung Galaxy C5,Moto G4 Plus,Moto G4.
I have found the stock rom at the link "http://www.smartfirmwares.com/forum1/index.php?topic=189.0".
Can anyone help please?
Good news for all the users of LYF F1 who wants to have twrp and root access.
I found the stock rom at link "http://www.smartfirmwares.com/forum1/index.php?topic=189.0"
I extracted the stock rom and got the stock recovery,then I got the twrp recovery of ZTE Axon 7 Mini.
I ported the twrp by replacing only the zImage from the stock to the twrp,and kept the ramdisk the same in twrp.
It booted up well but I got a error that twrp could not mount any partition except the recovery.
I then got the twrp of Moto G4 Plus,but the twrp did not have the ramdisk,it only contains zImage,so I could not port it.
I then got the twrp of Samsung Galaxy C5 and ported it in the same way,but it put the phone into recovery bootloop,phone was booting into twrp,then switching off,then again booting to twrp,at one moment when phone was switched off for one second,I flashed again the previous working recovery.
I then ported the twrp recovery of ZTE Axon Max but it gave the same error that it could not mount any partition except the recovery.
Then I ported the twrp recovery of ZTE Nubia Z11 Mini and this one was successfull without any error,but the recovery was in chinese.I can not remember the whole thing but the first window appeared in front,I touched the lower right conrer and changed the language to english,since then everything is in english.The link of that recovery is "https://drive.google.com/open?id=0B2iZIwRNj3bpaEl3dWR1eXRsalk" and password is "Created-by-Tarasantan"
Now How did I flashed the twrp,I downloaded and extracted the stock rom,then I found a "_qcMUP.zip" within the zip "LYF F1 LS-5505 TOOL & DRIVERS.zip",then extracted the zip _qcMUP.zip,there in the support folder I found some windows softwares,I ran all of them to install the drivers and neccessary files.
Then in the "LYF F1 LS-5505 PC SW VER 01_06 By Gsm_F!rmwares_Tm" folder I replaced the stock "recovery.img" with the twrp "recovery.img".And then I ran the "qcMUP.exe" in the _qcMUP folder which I previously extracted.
Now I clicked the do button in the upper right corner of "qcMUP.exe",then clicked upgrade,then I selected the "LYF F1 LS-5505 PC SW VER 01_06 By Gsm_F!rmwares_Tm" folder.
Now I switched off the phone,then I pressed and hold volume up and down at the same time,and pluged the phone into the computer and the flashing started on qcMUP.exe window with a light blue bar filling up with a deep blue colour as the flashing was going on.
This will clear all the apps and data you previously have had in your internal memory.So you can back up all the installed app with es filexplorer,or super backup,and all the contacts and smses with super backup,then you must move all the backed up things and other neccessary things to the sd card.At the end put the latest supersu.zip in your sd card.
The next part is very important,when flashing is passed,you will unplug the phone from the computer,then press and hold the power and the volume up at the same time.You will be booted up into twrp then somehow change the language to english from chinese,then flash the supersu.zip from your sd card,if you do not boot into twrp and flash the supersu.zip then whenever you will boot into the system,the twrp recovery will be replaced with the stock recovery,when you flash the supersu.zip,it patches the boot.img so that it does not replace the twrp recovery with the stock.
Alternatively
you can use the following method.I have not tested this method,but this should work.In this method you just need to download this file "TWRP For LYF F1.7z",from https://drive.google.com/open?id=0B2iZIwRNj3bpanRsaUM0OEdYV3c ,password is Created-By-Tarasantan .This recovery is made for exactly LS-5505,that means ro.product.device is LS-5505 ,ro.product.locale is en-IN and other properties are also changed for LS-5505.
Download and Extract the "TWRP For LYF F1.7z" file,then install the given drivers,then run the "qcMUP.exe".
Now Click the do button in the upper right corner of "qcMUP.exe" window,then click upgrade,then select the "LYF F1 LS-5505 TWRP 3.0.2" folder.
Now switch off the phone,then press and hold volume up and down at the same time,and plug the phone into the computer and the flashing should start on qcMUP.exe window with a light blue bar filling up with a deep blue colour as the flashing is going on.
This will not clear any apps and data that you previously have had in your internal memory.So you do not need to back up anything.But you need to put a supersu.zip in your sd card.
The next part is very important,when flashing is passed,unplug the phone from the computer,then press and hold the power and the volume up at the same time.Your phone should be booted up into twrp,then flash the supersu.zip from your sd card,if you do not boot your phone into twrp and flash the supersu.zip then whenever you will boot into the system,the twrp recovery will be replaced with the stock recovery,when you flash the supersu.zip,it patches the boot.img so that the boot.img does not replace the twrp recovery with the stock one.
Link of a image of the window which will come when you first time boot into twrp
https://drive.google.com/open?id=0B2iZIwRNj3bpbTgySjdfRFZKUzg
Hey i am also have lyf f1 5505 ia want to root plz give me all the recommended links and processs
Plz help the lyf user
hi bro need help
twrp is password protected plz provide password
---------- Post added at 05:28 AM ---------- Previous post was at 05:05 AM ----------
thankyou ls5505 root done .............................................................................
Plz give me password.
plz sir give me password
AyanRangrez said:
plz sir give me password
Click to expand...
Click to collapse
Please Read the full post, password is Created-By-Tarasantan
Sir please give me Lyf f1 twrp password please in am very tensed
Vishul saxena said:
Sir please give me Lyf f1 twrp password please in am very tensed
Click to expand...
Click to collapse
R u being serious read the first post well dear! Or have a glass of water before that then re-read it again! I have mentioned so many times go through the pages! We are here to help you people not serve you! Read the whole topic.
Hii.. I need some help.
I need some help regarding the flashing method....what i mean is ... that is it possible to unlock its bootloader by those fastboot , etc. commands and then flashing twrp recovery ???
Hello sir thank for the that wonderful information but i want help, i root my phone with help of your process full flash phone with twrp file but now my volte features is gone after flashing i try and remove recovery and flash with original stock rom then reboot normally but still my volte feature not enable i try with *#*#4636#*#* and check setting but there nothing happen i download universel volte patch file download from xda forum patch 1 and patch 2 and install through recovery after reinstall recovery but problem still same before install twrp my airtel sim was work on volte calling+4g but now lte only work no calling i was hide every thing with magiks manager but nothing was solve can u pls help me what should do thanks
Needsupport said:
I need some help regarding the flashing method....what i mean is ... that is it possible to unlock its bootloader by those fastboot , etc. commands and then flashing twrp recovery ???
Click to expand...
Click to collapse
Yes u can but why u want to unlock when u install twrp recovery everything is in ur control after install magiks manger so many root app will solve many problem
Guys, kindly provide me a latest firmware for ls5505.