[Completed] Huawei Y330 CWM - XDA Assist

Hi guys.....i have tried to install a cwm recovery on this phone for quite a while....the devices having no official cwm.....i made it with mtkdroid tools....but it would end with an error saying failed to write to block device....so i tried to flash the cwm via sp flashtool....again it failed saying error img dl sign-header not found....i guess that meant that the recovery was not signed hence it cant be flashed...i tried to dd the img via terminal emulator and the process would be a success only to find that the phone cant boot neither enter recovery mode......the latter is already fixded...but the cwm still is not my recovery....plz help me in doing this.... The phone has a MT6572 SOC chip....and its not mtd........and the recovery partition is squeezed in a mmcblk0 partition which has alot of stuff going on....

Hi,
Thanks for using XDA Assist if cwm is for your device specific then contact developer of that cwm who released .. if you are trying to install CWM from other device then do not do so you will end up bricking your device to unrecoverable state ..
Good Luck!

Related

[Q] Wintouch Q73 Stuck in cwm Recovery

hi
My wintouch Q73 a Chinese tablet stuck into CWM Recovery everytime i start my phone after wintouch logo it open CWM recovery
CWM recovery version is 5.0.5 nd phone is with A10 Chip
How do i uninstall CWM Recovery nd if there is any other way to start phone?
please help
My made in chine a10 ly-f8s tablet also stucked on cwm recovery i tried so many tricks but it doen't work please developers suggest some thing adb shell is not working even i tried to update cwm recovery from install zip from sd card but still running 6.0.1.0 ly-f1/treq recovery i flashed rom via live tool after 3% massage appears update failed, i dont know how to do or what to do? please help!
john-ammu said:
My made in chine a10 ly-f8s tablet also stucked on cwm recovery i tried so many tricks but it doen't work please developers suggest some thing adb shell is not working even i tried to update cwm recovery from install zip from sd card but still running 6.0.1.0 ly-f1/treq recovery i flashed rom via live tool after 3% massage appears update failed, i dont know how to do or what to do? please help!
Click to expand...
Click to collapse
Have you tried to pull the battery off..then back on and switch on ??

carliv's recovery in Lenovo A269i

Hello everyone, I don't know if I am posting in the right section, if not, please help me in finding the right one.
Can anyone please direct me where I can download the factory ROM for Lenovo model A269i. MtkDT accidentally got deleted with backup of the ROM. Now the phone is stuck on the Lenovo logo when I was trying to root the phone. Sorry for my bad English.
Edit:
I have booted successfully the phone and installed carliv's recovery but the recovery doesn't open system, data and cache partitions.
Carliv touch recovery
I have been able to port Carliv touch recovery to Lenovo A269i, but can't test it as my phone was soft bricked. recovery can't mount /system. From all the researches I have made, I need factory rom for the phone to be able to recreate the partitions and to test the recovery.
All credits goes to Carliv for this successful porting of recovery to the device. I can't post in http://forum.xda-developers.com/showthread.php?t=1825722 as I have fewer than 10 posts.
Carliv recovery
Hi I have been able to successfully booted the phone in android 2.3.6. Already rooted it and installed carliv's recovery which I modified, but the recovery cannot mount /cache, /system and /data but in root explorer and adb, /system, /cache and /data opens normally.
johnny523 said:
Hi I have been able to successfully booted the phone in android 2.3.6. Already rooted it and installed carliv's recovery which I modified, but the recovery cannot mount /cache, /system and /data but in root explorer and adb, /system, /cache and /data opens normally.
Click to expand...
Click to collapse
Successfully ported the recovery. it can mount system, data and cache. Thanks...
recovery
johnny523 said:
Successfully ported the recovery. it can mount system, data and cache. Thanks...
Click to expand...
Click to collapse
Hello
I have the same problem with a269i.
it stuck on logo
could you please make carliv's recovery and send it to me or put a link?
maybe you have already installed android 4 on it?
please help ...
Ramunas3000 said:
Hello
I have the same problem with a269i.
it stuck on logo
could you please make carliv's recovery and send it to me or put a link?
maybe you have already installed android 4 on it?
please help ...
Click to expand...
Click to collapse
first you'll have to get factory rom for the phone from http://www.needrom.com/mobile/lenovo-a269i/ then flash with sp flash tool to recover your phone. when you revived your phone, i'll try to upload the recovery for you to flash.
error status 0
I am getting error status 0 when trying to install a cwm zip in this phone. Help needed to get the mount points for ubifs mtk devices
error in carliv's recovery
Well I checked the log for recovery and found out that it boots in recovery with errors. I get the following errors:
can't open /dev/tty0: no such file or directory
.
.
.
w: unable to get recovery.fstab info for /datadata during fstab generation!
w: unable to get recovery.fstab info for /emmc during fstab generation!
w: unable to get recovery.fstab info for /external_sd during fstab generation!
and a bunch of other errors. I have tried to rebuild the recovery several times with same errors
Please Upload the recovery file that is flashable with SP Flasher Tool ... I beg you
help
johnny523 said:
Hi I have been able to successfully booted the phone in android 2.3.6. Already rooted it and installed carliv's recovery which I modified, but the recovery cannot mount /cache, /system and /data but in root explorer and adb, /system, /cache and /data opens normally.
Click to expand...
Click to collapse
Hey I just got this phone...and i wanted to know how to root it..can you please walk me through the procedure of rooting...and possibly if there is any ROM for this phone..i would love to know about it...im an avid flasher and really need root to get work done on such budget phones...will be happy and appreciative of any assistance.!
firoz_95 said:
Hey I just got this phone...and i wanted to know how to root it..can you please walk me through the procedure of rooting...and possibly if there is any ROM for this phone..i would love to know about it...im an avid flasher and really need root to get work done on such budget phones...will be happy and appreciative of any assistance.!
Click to expand...
Click to collapse
sorry for late reply, I was very busy.
First of all, you WILL HAVE TO BACKUP your rom with the latest MTKdroid tools (v2.5.3 can backup the phone)
Secondly use framaroot to root your phone.
then use carliv recovery to create a custom recovery.
Again, Do NOT FORGET TO CREATE A BACKUP OF YOUR WORKING FACTORY ROM OR YOU WILL REGRET IT WHEN SOMETHING GOES WRONG. If mtkdroid tools takes very little time, it may mean that it hasn't backed up your rom.
Well, use google to find the tools mentioned above.
hi i just got my 269i,and i rooted it however i would like to install a custom recovery for functions like NANDroid backup/restore and for flashing custom roms. I have tried rom manager but my phone isn't supported. You said you have a custom recovery installed(carlivs touch recovery). I would like to know how you did this(step by step process) and download links to the recovery image file you used if possible
help
same problem. please help resolve the issue. already using the stock rom from needrom remain only until the boot logo. can give help address the link or the devloper who can overcome it.
thank for all
:crying::crying::crying::crying:
Lenovo A269i
The bluetooth has not work or dissappeared in that phone. i couldnt find my bluetooth app . anyone please help me?
Lenovo a269i soft brick
my Lenovo a269i is having a soft brick and I didnt enable my usb debugging, can you help me how to unbrick my phone?
CWM Recovery for Lenovo A269i
johnny523 said:
I have been able to port Carliv touch recovery to Lenovo A269i, but can't test it as my phone was soft bricked. recovery can't mount /system. From all the researches I have made, I need factory rom for the phone to be able to recreate the partitions and to test the recovery.
All credits goes to Carliv for this successful porting of recovery to the device. I can't post in http://forum.xda-developers.com/showthread.php?t=1825722 as I have fewer than 10 posts.
Click to expand...
Click to collapse
I have a Lenovo A269i and I wanted a CWM Recovery for it. Do you know where could I get it. I am new to this forum
johnny523 said:
Hi I have been able to successfully booted the phone in android 2.3.6. Already rooted it and installed carliv's recovery which I modified, but the recovery cannot mount /cache, /system and /data but in root explorer and adb, /system, /cache and /data opens normally.
Click to expand...
Click to collapse
Can you plzzzzz give me the custom recovery.IMG I want to flash it in my Lenovo a269i without pc
After many efforts ive managed to port it without any problms.
Soon i will post it to you.
---------- Post added at 08:21 AM ---------- Previous post was at 08:16 AM ----------
karenyhl said:
The bluetooth has not work or dissappeared in that phone. i couldnt find my bluetooth app . anyone please help me?
Click to expand...
Click to collapse
Use another stock rom
Find it on need rom.com
someone link me to carliv recovery for the a269i and the procedure to flash it?
There is a lollipop ROM fir this device roaming on the web. Is it fake? It probably is.
This is a pretty old phone by now, anyone figured any diy uses for it? Any custom software/ROM/mod?

[Completed] Unable to load CWM/TWRP and misssing recovery partition

I've been searching around XDA and other forums for a while and have been unable to find a solution
TLDR; I am unable to flash a custom recovery with MTK droid tools, SP flash tool, Flashify, Fastboot, Rashr, CWM magic, TWRP magic, CWM app, TWRP app and now i no longer have a recovery on my phone, not even the stock
Phone: Huawei Y360-U23
Android: Kitkat 4.4.2
Kernel: 3.4.67
So here goes, I wanted to flash cwm recovery as i have with my previous android phones, however it is unsupported on the CWM list, I also tried TWRP, my device is also unsupported.
-I did some reading around and found some guides on how to use MTK droid tools to back up and then SP flash tool to change my recovery
- I encountered errors but was able to fix most EXCEPT, Zero error, no space left on device , tried the recommended busybox fix and ensured all drivers were properly installed but did not help
- Fastboot gives me the error "remote partition 'recovery' not support flash"
- SP flash tool wouldnt do anything after i pressed the download button
- TWRP magic tool flashed my recovery mod but could not back up, but failed
- CWM magic tool flashed my recovery mod but when a backup was attempted this error was received " could not open /tmp recovery.log"
- Flashify and Rashr both failed to flash recovery
I tried to flash my recovery with the TWRP magic tool a final time but now my phone won't boot into recovery at all.
Please offer any help you can, it would be greatly appreciated
SirFitz said:
I've been searching around XDA and other forums for a while and have been unable to find a solution
TLDR; I am unable to flash a custom recovery with MTK droid tools, SP flash tool, Flashify, Fastboot, Rashr, CWM magic, TWRP magic, CWM app, TWRP app and now i no longer have a recovery on my phone, not even the stock
Phone: Huawei Y360-U23
Android: Kitkat 4.4.2
Kernel: 3.4.67
So here goes, I wanted to flash cwm recovery as i have with my previous android phones, however it is unsupported on the CWM list, I also tried TWRP, my device is also unsupported.
-I did some reading around and found some guides on how to use MTK droid tools to back up and then SP flash tool to change my recovery
- I encountered errors but was able to fix most EXCEPT, Zero error, no space left on device , tried the recommended busybox fix and ensured all drivers were properly installed but did not help
- Fastboot gives me the error "remote partition 'recovery' not support flash"
- SP flash tool wouldnt do anything after i pressed the download button
- TWRP magic tool flashed my recovery mod but could not back up, but failed
- CWM magic tool flashed my recovery mod but when a backup was attempted this error was received " could not open /tmp recovery.log"
- Flashify and Rashr both failed to flash recovery
I tried to flash my recovery with the TWRP magic tool a final time but now my phone won't boot into recovery at all.
Please offer any help you can, it would be greatly appreciated
Click to expand...
Click to collapse
Hello,
You may try posting your query here Ask any Q Noobfriendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Vatsal said:
Hello,
You may try posting your query here Ask any Q Noobfriendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Click to expand...
Click to collapse
Thank you

Bootloader and Stock Recovery Lost

My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
It seems that MMX has locked the Bootloader after the LP OTA update. So try booting to fastboot and then with a connected PC, unlock the Bootloader with the fastboot oem unlock command. Then use SP Tools to flash a custom recovery. I've seen that this takes a few tries so go at it again and again, removing and reconnecting the usb cable until the flashing occurs(of course, assuming that you have all necessary usb drivers installed). Philz and TWRP themed version seems to be working fine(haven't thoroughly checked the others).
akhil4845 said:
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/uni...very-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
Click to expand...
Click to collapse
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Yeah I got it...... Thank you all
ChahatGupta said:
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Click to expand...
Click to collapse
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
vasup0261 said:
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
Click to expand...
Click to collapse
hi can some one help me out with this.
Please.
I had the same problem. Try to install stock rom with pc it will get back stock recovery

[Completed] Can't open custom recovery

I use Android one it is rooted when i flashed twrp form my phone and i go to recovery mode it says recovery mode below but then just tge logo and doesn't go ahead.
When i did this with pc i used adb to flash recovery and i booted recovery without rebooting onto system it got an error unable to mount /data and stuck there till i flashed new rom.
Can anyone help me install TWRP without errors.
Hello and welcome to Assist
The procedure to install TWRP for your device is same as CWM so follow the instructions posted here
https://forum.xda-developers.com/cr...covery-clockworkmod-recovery-6-0-5-1-t2885736
If you have further questions or want to post in the main forums you'll need to register an account first
Good luck

Categories

Resources