Hi people, i have a big problem, after i unlock bootlader of my moto g i try to root it with http://wccftech.com/how-to-root-moto-g/ and now my moto g does not turn it on. when i plug it noting happend.
Any idea someone ? please help
dieuy said:
Hi people, i have a big problem, after i unlock bootlader of my moto g i try to root it with http://wccftech.com/how-to-root-moto-g/ and now my moto g does not turn it on. when i plug it noting happend.
Any idea someone ? please help
Click to expand...
Click to collapse
reflash your stock rom
nasheich said:
reflash your stock rom
Click to expand...
Click to collapse
how can i reflash if a can not enter in fastboot mode ?
dieuy said:
how can i reflash if a can not enter in fastboot mode ?
Click to expand...
Click to collapse
open this thread, maybe it'll help you
http://forum.xda-developers.com/showthread.php?p=50029015#post50029015
nasheich said:
open this thread, maybe it'll help you
http://forum.xda-developers.com/showthread.php?p=50029015#post50029015
Click to expand...
Click to collapse
Thanks but prompt say Waiting for device and i already have drivers installed, not work
dieuy said:
Thanks but prompt say Waiting for device and i already have drivers installed, not work
Click to expand...
Click to collapse
read again carefully, or go to another thread around your device sections
Did you try to force reboot vol up + power for 10 seconds. If that works you should be able to get to fastboot
Sent from my falcon using xda app-developers app
i believe the problem is with the battery.
charge your moto g with wall charger (dont charge with PC) for 3hr without interruption then you try to switch ON.
What was the battery level before you unlocked bootloader.
Thanks to all. The screen was on so i wait to run off of battery. Now it works fine, thanks!
Related
Forgot to disable LG modem
Currently stuck in emergency mode
Haven'tremoved battery
[RANT]
(Why the actual f*** did I do that)
[/RANT]
@Junior Einstein @xu3sno @ibub @shinobisoft @sweetnsour
akiratoriyama said:
Forgot to disable LG modem
Currently stuck in emergency mode
Haven't removed battery yet
@Junior Einstein @xu3sno @ibub @shinobisoft @sweetnsour
Click to expand...
Click to collapse
Can't you just disable the modem and start over?
shinobisoft said:
Can't you just disable the modem and start over?
Click to expand...
Click to collapse
Getting some type of error
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
Getting some type of error
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
The following thread is only a few posts long. Read them. Do exactly as the OP states and what is additionally stated in post #3.
Here's the thread. Only thing different you will do is use your KDZ file instead of the one mentioned. This setup just unbricked two P506's for me. They have been bricks for about 2 years. Only booted to Emergency Mode. Now both of them are fully functional again.
shinobisoft said:
The following thread is only a few posts long. Read them. Do exactly as the OP states and what is additionally stated in post #3.
Here's the thread. Only thing different you will do is use your KDZ file instead of the one mentioned. This setup just unbricked two P506's for me. They have been bricks for about 2 years. Only booted to Emergency Mode. Now both of them are fully functional again.
Click to expand...
Click to collapse
I shouldn't remove the battery right ?
Also laptop is no longer detecting my oone for some strange reason (Disabled LG modem #2 and then it asked for a restart which I did)
Sent from my GT-I9082 using Tapatalk
Refuses to boot now
Looks like I own a brick
Thanks Optimus One community
It was a wonderful time :crying:
Farewell
akiratoriyama said:
Thanks Optimus One community
It was a wonderful time :crying:
Farewell
Click to expand...
Click to collapse
@akiratoriyama
Hey, not so fast, man
Did you try this:
http://androidforums.com/optimus-one-tips-tricks/410080-how-unbrick-your-lg-p500-optimus-one.html
And I think our p500 community with such experience and expertise to unbrick the phone will help you :good:
xu3sno said:
@akiratoriyama
Hey, not so fast, man
Did you try this:
http://androidforums.com/optimus-one-tips-tricks/410080-how-unbrick-your-lg-p500-optimus-one.html
And I think our p500 community with such experience and expertise to unbrick the phone will help you :good:
Click to expand...
Click to collapse
Doesn't even boot
akiratoriyama said:
Refuses to boot now
Looks like I own a brick
Click to expand...
Click to collapse
no sign of any animation? LG logo for a split second? remove battery and connect charger directly if it shows any sign at all. i think the mobile still can be recovered using JTAG. many had fixed their mobiles using jtags.
sam811 said:
no sign of any animation? LG logo for a split second? remove battery and connect charger directly if it shows any sign at all. i think the mobile still can be recovered using JTAG. many had fixed their mobiles using jtags.
Click to expand...
Click to collapse
Not for a single split sec
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
I shouldn't remove the battery right ?
Also laptop is no longer detecting my oone for some strange reason (Disabled LG modem #2 and then it asked for a restart which I did)
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Sad news... use this attached usbdeview tools (run as admin and delete all Ports and lets detect your pc all portss), try to detect your phone by reinstall usb driver, once device get detected, start device on bootloader by pressing HOME+VOL+Power button and flash recovery first by using Flashtool software http://www.flashtool.net/sshot1.php in your pc and click on "Power Icon" and select the "Fastboot Mode" and then click on "Select kernel to hotboot" and choose the recovery.img... Note this is for sony devices but you can flash img files on lg device too..
I too got bricked while using KDZ once and I did this and it worked. Best of luck :good:
Edit:
If above not help, try this tutorial too http://forum.xda-developers.com/showthread.php?t=1197111
mukulsoni said:
Sad news... use this attached usbdeview tools (run as admin and delete all Ports and lets detect your pc all portss), try to detect your phone by reinstall usb driver, once device get detected, start device on bootloader by pressing HOME+VOL+Power button and flash recovery first by using Flashtool software http://www.flashtool.net/sshot1.php in your pc and click on "Power Icon" and select the "Fastboot Mode" and then click on "Select kernel to hotboot" and choose the recovery.img... Note this is for sony devices but you can flash img files on lg device too..
I too got bricked while using KDZ once and I did this and it worked. Best of luck :good:
Click to expand...
Click to collapse
After you bricked was it like a dead body ?
No response to any thing aka charging,pressing power button etc
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
After you bricked was it like a dead body ?
No response to any thing aka charging,pressing power button etc
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
No.... it wasn't. Can you start your phone in emergency mode by pressing power + volume up + back button? let me know
mukulsoni said:
No.... it wasn't. Can you start your phone in emergency mode by pressing power + volume up + back button? let me know
Click to expand...
Click to collapse
Nope ;-;
No light no logo no emergency mode nothing
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
Nope ;-;
No light no logo no emergency mode nothing
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Hard brick device!! Last option : remove battery, wait for 30 sec and then insert usb data cable (pc connected), at the same time pressing vol up+back button. See if it work
Edit:
One more option: Open your device back panel by using screw driver. On the device board, just remove the battery and reinsert. check this too if it Hard Reset your device. Best of luck
mukulsoni said:
Hard brick device!! Last option : remove battery, wait for 30 sec and then insert usb data cable (pc connected), at the same time pressing vol up+back button. See if it work
Edit:
One more option: Open your device back panel by using screw driver. On the device board, just remove the battery and reinsert. check this too if it Hard Reset your device. Best of luck
Click to expand...
Click to collapse
Which battery ?
Is there any inbuilt battery ?
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
Which battery ?
Is there any inbuilt battery ?
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Wait....
Before the above, just try this tutorial (read carefully second para) http://forum.xda-developers.com/showthread.php?t=1197111
mukulsoni said:
Wait....
Before the above, just try this tutorial (read carefully second para) http://forum.xda-developers.com/showthread.php?t=1197111
Click to expand...
Click to collapse
Already tried
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
Already tried
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Ok then.... Open your device back panel by using screw driver andd remove on-board battery and reinstall. lets see
something went wrong while flashing a custom rom and after that this happend now device power on but no logo and only FASTBOOT working fine but flashmod doesn't work. when i connected to pc while holding both vol keys its connect as "qhsusb_dload" i also installed the drivers but don't know what to do now search hours to fix but nothing useful.. please someone have any idea share with me...
milindu said:
something went wrong while flashing a custom rom and after that this happend now device power on but no logo and only FASTBOOT working fine but flashmod doesn't work. when i connected to pc while holding both vol keys its connect as "qhsusb_dload" i also installed the drivers but don't know what to do now search hours to fix but nothing useful.. please someone have any idea share with me...
Click to expand...
Click to collapse
Flash your phone software with flashtool!
-------:::::::::::-------
flash mode not working, only fastboot work...
milindu said:
flash mode not working, only fastboot work...
Click to expand...
Click to collapse
Try flashing a different kernel and then booting
Sent from my C2105 using XDA Premium 4 mobile app
tried.. not working..
something to do with "qhsusb_dload"..?
milindu said:
something to do with "qhsusb_dload"..?
Click to expand...
Click to collapse
Yes,your boot partition is missing..the best way to recover is send it to sony for repair..
Or you can ask this guy..http://forum.xda-developers.com/showthread.php?t=2646405
Thanks bro
faizalotai said:
Yes,your boot partition is missing..the best way to recover is send it to sony for repair..
Or you can ask this guy..http://forum.xda-developers.com/showthread.php?t=2646405
Click to expand...
Click to collapse
So, my question is solved
On my L, accidently flashed xperia U's firmware, then rebooted and died :crying::crying::crying: what can I do? when trying to attach device in fastboot, flashboot mode, nothing happens. Please, please help me guys.
thanks
not solutions ? :crying::crying:
Steve Mc. Gregory said:
not solutions ? :crying::crying:
Click to expand...
Click to collapse
Try flash stock fw back..pull out battery with push power button about 3-5 sec then connect to flash..
If its failed then i guess goodbye to your device..
I'll Try. thanks for support
I too have same problem kindly give me some solution
Your device is dead.
grewal720 said:
I too have same problem kindly give me some solution
Click to expand...
Click to collapse
See possible solution stated above.
aleksander002 said:
Your device is dead.
Click to expand...
Click to collapse
Technically, a non organic thing can't die.
Send from da hood
i have tried but my phone doesn't get into flash mode or fastboot mode.
grewal720 said:
i have tried but my phone doesn't get into flash mode or fastboot mode.
Click to expand...
Click to collapse
Then it's dead, and the only thing you can do about it is send it to a service center.
Isn't there a way for xperia l to recover from hard brick like xperia z1 via test point or something bcz sending for repair will be very expensive and it would be better of buying a new phone.
Is it possible that device becomes totally unrecoverable(hard bricked) when i attempted to change partitions and went wrong.
bassil.alzoubi said:
hi
1-make sure you battery is charged
2-pull out battery for 10 minutes
3-connect your phone in flash mode (hold vol down button then connect usb cable
not work ?
try another usb cable another usb port
i dont think the phone will totally dead by flashing a wrong firmware but i think its a battery issue
Click to expand...
Click to collapse
Thanks for reply. it was port issue. data wasnt working
Guys
I had hard bricked X10. So use JTAG/REFF connection and rebuild your device. It's so hard, but I made it good luck
Hm ..
bassil.alzoubi said:
i told you try another usb port
and dont say thanks ....press it :good:
Click to expand...
Click to collapse
already pressed man thanks for useful reply :good:
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
sarry86 said:
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
Click to expand...
Click to collapse
does download mode works @sarry86
mohsin931 said:
does download mode works @sarry86
Click to expand...
Click to collapse
Yes it does but stays for 3 or 4 seconds then it restarts
sarry86 said:
Yes it does but stays for 3 or 4 seconds then it restarts
Click to expand...
Click to collapse
flashing does not work in recovery?
mohsin931 said:
flashing does not work in recovery?
Click to expand...
Click to collapse
Only factory data reset work but it doesn't change anything, i wish i could just make it detected on pc, just that for now
sarry86 said:
Only factory data reset work but it doesn't change anything, i wish i could just make it detected on pc, just that for now
Click to expand...
Click to collapse
how did it happened?
mohsin931 said:
how did it happened?
Click to expand...
Click to collapse
He received an ota update then all of a sudden a phone went off and it went to a constant bootloop till now
sarry86 said:
He received an ota update then all of a sudden a phone went off and it went to a constant bootloop till now
Click to expand...
Click to collapse
it is hardbrick remove battery and connect to computer and tell me is it detected
mohsin931 said:
it is hardbrick remove battery and connect to computer and tell me is it detected
Click to expand...
Click to collapse
No nothing even in device manager
sarry86 said:
No nothing even in device manager
Click to expand...
Click to collapse
usb is not recognized did you got this message?
mohsin931 said:
usb is not recognized did you got this message?
Click to expand...
Click to collapse
Nothing but sometimes i get the message "USB only charge interface"
mohsin931 said:
usb is not recognized did you got this message?
Click to expand...
Click to collapse
same method ashttps://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/ can be folowed to unbrick your phonebut first it needed to be dtected as Qualcom 9006 which require opening the phone and shortening specific pins
mohsin931 said:
same method ashttps://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/ can be folowed to unbrick your phonebut first it needed to be dtected as Qualcom 9006 which require opening the phone and shortening specific pins
Click to expand...
Click to collapse
Thanks bro i will try tomorrow and will let you know
If u still face the problem toss a new battery and check it ....or grab a old Nokia battery or which ever battery fits positive and negative connection in the phone. If the phone turns on its your BATTERY...ORIGINAL G PRO 2 BATTERY COSTS AROUND 180$ DO NOT BUY CHINESE KNOCK OFF......INFORMATION IS MEDICINE :good:
---------- Post added at 09:52 AM ---------- Previous post was at 09:51 AM ----------
sarry86 said:
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
Click to expand...
Click to collapse
It's the battery problem even if the battery looks good toss a new one and check before doing all this stuffs
sarry86 said:
Thanks bro i will try tomorrow and will let you know
Click to expand...
Click to collapse
hello bro the problem u have now is u have custom recovery installed on your phone and u received ota update and the phone try to install the ota update so after that your phone cant boot ur phone the phone is bootloop . if that is the problem u have to install twrp recovery and go to terminal type this code dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota then after that reboot your phone. If i help u dont forget the thanks bottom :good:
can somebody provide me files of firehose and patch file for my device
gagan.gowdaaa said:
can somebody provide me files of firehose and patch file for my device
Click to expand...
Click to collapse
could you provide details about how your device is hard bricked? Are you able to boot into download mode?
barryallen3038 said:
could you provide details about how your device is hard bricked? Are you able to boot into download mode?
Click to expand...
Click to collapse
i just updated from ray os to pixel, after booting up and using for some time my device started acting wierdly and i restarted it,from that time my phone is not responding, and cant even go to the download mode, its in a dead state
gagan.gowdaaa said:
i just updated from ray os to pixel, after booting up and using for some time my device started acting wierdly and i restarted it,from that time my phone is not responding, and cant even go to the download mode, its in a dead state
Click to expand...
Click to collapse
aah, you should have installed stock before moving to pixel...
Are you sure you tried everything? Could you send a video of what happens when you power it on? Also, does it accept charge when you connect it to the charger?
barryallen3038 said:
aah, you should have installed stock before moving to pixel...
Are you sure you tried everything? Could you send a video of what happens when you power it on? Also, does it accept charge when you connect it to the charger?
Click to expand...
Click to collapse
i tried to boot it up at every possible way but it wont ,it accepts charging also ,i got to know that when i put my phone with the power bank, when i try to turn on it wont respond,it doesnt even vibrate also , so i tried to put it to edl mode and it worked and it got connected to my pc by qualcom driver
gagan.gowdaaa said:
i tried to boot it up at every possible way but it wont ,it accepts charging also ,i got to know that when i put my phone with the power bank, when i try to turn on it wont respond,it doesnt even vibrate also , so i tried to put it to edl mode and it worked and it got connected to my pc by qualcom driver
Click to expand...
Click to collapse
That's great! You should be able to force flash the stock firmware through this mode.
This video might help..
barryallen3038 said:
That's great! You should be able to force flash the stock firmware through this mode.
This video might help..
Click to expand...
Click to collapse
thank you so much for helping me sir ;0
gagan.gowdaaa said:
thank you so much for helping me sir ;0
Click to expand...
Click to collapse
No problem man. Did you manage to unbrick it?