Related
Hi every one want help on ur Bricked tipo Or
Problem with Rooting or any thing u are facing
Feel Free and post here
I or any member might help You....
Xperia Miro And Xperia j users are also invited
Good Luck..:good:
help
hi all in my last thread friends in forum post to my questional thread the offical sony xperia tipo dual ftf i dawnload it
2nd: my phone dos'nt fast boot or flash mode if i connect usb + prees volume- no thing done please help me
cannot boot after unlock bootloader and flashing
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
Which build fxp are you using? Get latest, and use flashtool to fastboot kernel this time.
Some fxp build have boot.img problem.
Sent from my ST27i
joehoor said:
hi all in my last thread friends in forum post to my questional thread the offical sony xperia tipo dual ftf i dawnload it
2nd: my phone dos'nt fast boot or flash mode if i connect usb + prees volume- no thing done please help me
Click to expand...
Click to collapse
Switch off ur phone hold volume down and connect to pc ..(while holding volume-)..To enter in
Flashmode also sometime it take 2-3 time to connect
Did u get green notification light on ur phone..
Tell me If u get green light I will help u further.. .
If u donot get green light than what u r getting..
rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
Flash stock ftf first and then flash boot.IMG through flashtool of latest fxp205 and through cwm flash fxp Rom
Wipe data and cache.......
This method worked for me..
i try unlock bootloader but when i type this command "fastboot.exe -i 0x0fce getvar version" i don't take any response and i have the following message "waiting for device".
tassosmer said:
i try unlock bootloader but when i type this command "fastboot.exe -i 0x0fce getvar version" i don't take any response and i have the following message "waiting for device".
Click to expand...
Click to collapse
It is due to because ur drivers are not installed properly
See in device manager on ur pc if there is exclamation mark on ur device
If ur drivers are installed correctly than u can try this out
This method http://forum.xda-developers.com/showthread.php?t=1560613 is easy and there is no need of cmd etc:laugh:
By this u can unlock ur bootloader easily
no ting done
nishuy21 said:
Switch off ur phone hold volume down and connect to pc ..(while holding volume-)..To enter in
Flashmode also sometime it take 2-3 time to connect
Did u get green notification light on ur phone..
Tell me If u get green light I will help u further.. .
If u donot get green light than what u r getting..
Click to expand...
Click to collapse
no thing done or no light or nothing happens if i turn power only 3 led red lights !!:crying:
nishuy21 said:
It is due to because ur drivers are not installed properly
See in device manager on ur pc if there is exclamation mark on ur device
If ur drivers are installed correctly than u can try this out
This method http://forum.xda-developers.com/showthread.php?t=1560613 is easy and there is no need of cmd etc:laugh:
By this u can unlock ur bootloader easily
Click to expand...
Click to collapse
I tried this program yesterday but when i click "unlock BL" the program crashes.
joehoor said:
no thing done or no light or nothing happens if i turn power only 3 led red lights !!:crying:
Click to expand...
Click to collapse
Try on other USB ports
Try it with other USB data cable..
Try seus to repair ur phone if still can not
Then I'm afraid u have some hardware problem and u should go to Sony service centreAnd the problem can be of ur pc try on
Other pc if problem persist than bad luck u need to go to SC
Also try to disabe all USB ports and than enable them again in device manager on pc and reboot...
Good luck and tell us further more....
tassosmer said:
I tried this program yesterday but when i click "unlock BL" the program crashes.
Click to expand...
Click to collapse
I looked a bit at ur problem and this is with many other people
And all of them donot have fastboot mode driver installed correctly
click on the start menu, then right click on my computer, then click on manage from the drop down list, then in the window that pops up on the left hand side click on device manager.if u see unknown source or exclamation mark when u connect ur device
U can see this link http://forums.androidcentral.com/ve...ock-bootloader-root-verizon-galaxy-nexus.html for more description although it is for nexus but the process is same
Scroll down and see troubleshooting it might help u
Than ur drivers are not installed correctly
If drivers are installed than u must got a name like adb interface/bridge etc.
If this does not work than
Same as I said in above post
This problem can be caused by ur pc try this on any other pc
And install fastboot drivers or even u can use different USB ports some time USB ports donot work properly
Thank you for your advice. I did it. Now I face a big problem and i am terrified. I tried install fxp 205 but i made a mistake and my tipo doesn't work. My pc can't recognize it, so i can't flash ftf via flashtool. Please if you can help me!
tassosmer said:
Thank you for your advice. I did it. Now I face a big problem and i am terrified. I tried install fxp 205 but i made a mistake and my tipo doesn't work. My pc can't recognize it, so i can't flash ftf via flashtool. Please if you can help me!
Click to expand...
Click to collapse
What mistake have u done
Well can u enter flashmode I.e green notification light on tipo when u connect it
To pc with vol-
If it enters it is softbricked but if not
U are hard bricked no chance else repairing at service centre
If soft bricked still pc does not recognize see above post...
nishuy21 said:
What mistake have u done
Well can u enter flashmode I.e green notification light on tipo when u connect it
To pc with vol-
If it enters it is softbricked but if not
U are hard bricked no chance else repairing at service centre
If soft bricked still pc does not recognize see above post...
Click to expand...
Click to collapse
No, I can't do anything. I tried put phone to charge but nothing happened. i think that i made a hard brick. I entered to fastboot and i chose via flashtool to put boot.img but suddenly the phone turned off.
rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
i am using cm10 fxp203
---------- Post added at 11:33 PM ---------- Previous post was at 11:20 PM ----------
nishuy21 said:
Flash stock ftf first and then flash boot.IMG through flashtool of latest fxp205 and through cwm flash fxp Rom
Wipe data and cache.......
This method worked for me..
Click to expand...
Click to collapse
thanks but i had deposit my cell in service center they told me that os is not detecting so they will replace motherboard of my cell, let see what will happen next whether they will charge me or not. bless luck for me
rinkumeher said:
i am using cm10 fxp203
---------- Post added at 11:33 PM ---------- Previous post was at 11:20 PM ----------
thanks but i had deposit my cell in service center they told me that os is not detecting so they will replace motherboard of my cell, let see what will happen next whether they will charge me or not. bless luck for me[/QUOTE
As long as you unlocked bootloader you lost warranty. Tomorrow i will go for bigger problem. I hope that the cost won't be too much.
Click to expand...
Click to collapse
tassosmer said:
No, I can't do anything. I tried put phone to charge but nothing happened. i think that i made a hard brick. I entered to fastboot and i chose via flashtool to put boot.img but suddenly the phone turned off.
Click to expand...
Click to collapse
Be sure if ur phone is hardbricked sometimes it looks like but it is not
If hard bricked.......
Go to Sony service centre and there is also one thing I have heard about
"Jtag" it can unbrick many hard bricked phones at very low cost...
Go for it if it is available in ur country..
Better luck next time
nishuy21 said:
Be sure if ur phone is hardbricked sometimes it looks like but it is not
If hard bricked.......
Go to Sony service centre and there is also one thing I have heard about
"Jtag" it can unbrick many hard bricked phones at very low cost...
Go for it if it is available in ur country..
Better luck next time
Click to expand...
Click to collapse
The only life sign of tipo is the vibration when i turn it on. This happened once today and once yesterday night.
I need driver's download link for xperia
Tipo please
Sent from my ST21i using xda app-developers app
On my L, accidently flashed xperia U's firmware, then rebooted and died :crying::crying::crying: what can I do? when trying to attach device in fastboot, flashboot mode, nothing happens. Please, please help me guys.
thanks
not solutions ? :crying::crying:
Steve Mc. Gregory said:
not solutions ? :crying::crying:
Click to expand...
Click to collapse
Try flash stock fw back..pull out battery with push power button about 3-5 sec then connect to flash..
If its failed then i guess goodbye to your device..
I'll Try. thanks for support
I too have same problem kindly give me some solution
Your device is dead.
grewal720 said:
I too have same problem kindly give me some solution
Click to expand...
Click to collapse
See possible solution stated above.
aleksander002 said:
Your device is dead.
Click to expand...
Click to collapse
Technically, a non organic thing can't die.
Send from da hood
i have tried but my phone doesn't get into flash mode or fastboot mode.
grewal720 said:
i have tried but my phone doesn't get into flash mode or fastboot mode.
Click to expand...
Click to collapse
Then it's dead, and the only thing you can do about it is send it to a service center.
Isn't there a way for xperia l to recover from hard brick like xperia z1 via test point or something bcz sending for repair will be very expensive and it would be better of buying a new phone.
Is it possible that device becomes totally unrecoverable(hard bricked) when i attempted to change partitions and went wrong.
bassil.alzoubi said:
hi
1-make sure you battery is charged
2-pull out battery for 10 minutes
3-connect your phone in flash mode (hold vol down button then connect usb cable
not work ?
try another usb cable another usb port
i dont think the phone will totally dead by flashing a wrong firmware but i think its a battery issue
Click to expand...
Click to collapse
Thanks for reply. it was port issue. data wasnt working
Guys
I had hard bricked X10. So use JTAG/REFF connection and rebuild your device. It's so hard, but I made it good luck
Hm ..
bassil.alzoubi said:
i told you try another usb port
and dont say thanks ....press it :good:
Click to expand...
Click to collapse
already pressed man thanks for useful reply :good:
hey! i am new to xda and recently i repartitioned my xperia l device storage and internal storage but an error was encountered during the process so its like my phone doesnt boot up but recovery works and i am unable to mount cache,sdcard0,system,data and also unable to format. and the error which turns up in the recovery goes like "E: Can't Mount /cache/recovery/last_install. i read a few forums and got to know that my partition is corrupt so i tried to format it and bymistakenly i ran with this command "mke2fs -T ext4 /dev/block/mmcblk0" and now my storage is empty i suppose...........can anyone help me with this to revert all the things to beginning like stock os.........i have my bootloader unlocked and rooted.......................................will flashing a new kernel resolve my problem...?
THANKS! :good:
Did you try to flash the firmware using Flash tool?
Flashing should resolve that problem I guess. Do a flash with flashtool and a stock kernel and tell us what happens.
GreyLDroid said:
Flashing should resolve that problem I guess. Do a flash with flashtool and a stock kernel and tell us what happens.
Click to expand...
Click to collapse
now my phone doesn't start only....earlier sony boot up screen used to pop up but now it doesn't.............. even the notification LED doesn't glow now.....how can i start the flashing process, if my phone doesn't go in flashmode or fastboot mode.......but i tried it earlier i mean before wiping the storage......there was an error saying that unable to read device info....starting the flashing process anyhow and then Processing of loader.sin finished with errors.....
AvEnCruDer said:
now my phone doesn't start only....earlier sony boot up screen used to pop up but now it doesn't.............. even the notification LED doesn't glow now.....how can i start the flashing process, if my phone doesn't go in flashmode or fastboot mode.......but i tried it earlier i mean before wiping the storage......there was an error saying that unable to read device info....starting the flashing process anyhow and then Processing of loader.sin finished with errors.....
Click to expand...
Click to collapse
That's the only thing I would have tried as your error seemed like it would be solved by this... sorry...
Try to plug it to power and look if it charges, if a red led blinks/shines, great, if no led at all whatever you do, pull the battery, wait 5 minutes, reinsert it and try again - if still no led whatever you do, your phone is hard bricked... :/
AvEnCruDer said:
hey! i am new to xda and recently i repartitioned my xperia l device storage and internal storage but an error was encountered during the process so its like my phone doesnt boot up but recovery works and i am unable to mount cache,sdcard0,system,data and also unable to format. and the error which turns up in the recovery goes like "E: Can't Mount /cache/recovery/last_install. i read a few forums and got to know that my partition is corrupt so i tried to format it and bymistakenly i ran with this command "mke2fs -T ext4 /dev/block/mmcblk0" and now my storage is empty i suppose...........can anyone help me with this to revert all the things to beginning like stock os.........i have my bootloader unlocked and rooted.......................................will flashing a new kernel resolve my problem...?
THANKS! :good:
Click to expand...
Click to collapse
simply adb pull your backup of mmcblk
Sent from my C2105 using XDA Free mobile app
GreyLDroid said:
That's the only thing I would have tried as your error seemed like it would be solved by this... sorry...
Try to plug it to power and look if it charges, if a red led blinks/shines, great, if no led at all whatever you do, pull the battery, wait 5 minutes, reinsert it and try again - if still no led whatever you do, your phone is hard bricked... :/
Click to expand...
Click to collapse
i think that my phone is hard bricked...anyways isn't there any other option that i am left with?
SdtBarbarossa said:
simply adb pull your backup of mmcblk
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
how could i do it? if my pc isn't able to detect my phone and no led blinks when i plug my phone to my pc?
AvEnCruDer said:
how could i do it? if my pc isn't able to detect my phone and no led blinks when i plug my phone to my pc?
Click to expand...
Click to collapse
if you output the battery and connect the device to pc while holding vol - and vol +. is ut shown as QSHUSB_DLOAD?
Sent from my C2105 using XDA Free mobile app
SdtBarbarossa said:
if you output the battery and connect the device to pc while holding vol - and vol +. is ut shown as QSHUSB_DLOAD?
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
i did what u said i just removed the battery and then while holding vol - and vol + a yellow LED blinked....what to do after this and flashtool first says device sync finished then after sometime its says device disconnected....and what does "is ut shown as QSHUSB_DLOAD?" this mean .......i mean do i have to run via adb and then find this command???? plz elaborate Buddy! i am kinda noob ....... thanks
AvEnCruDer said:
i did what u said i just removed the battery and then while holding vol - and vol + a yellow LED blinked....what to do after this and flashtool first says device sync finished then after sometime its says device disconnected....and what does "is ut shown as QSHUSB_DLOAD?" this mean .......i mean do i have to run via adb and then find this command???? plz elaborate Buddy! i am kinda noob ....... thanks
Click to expand...
Click to collapse
QPST is the programm you need... driver you can find on my site...
sdtbarbarossa.bplaced.net (its d.zip)
but unfortunally i hot no msm8230.hex or msm8230.mbn ... may you find them in the www if you dont you have a problem
Sent from my C2105 using XDA Free mobile app
SdtBarbarossa said:
QPST is the programm you need... driver you can find on my site...
sdtbarbarossa.bplaced.net (its d.zip)
but unfortunally i hot no msm8230.hex or msm8230.mbn ... may you find them in the www if you dont you have a problem
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
Bro how to use the program and what to do after running it ? Plz elaborate and where can i find the 2 files which you have mentioned .hex and .mbn and bro will i be able to get my old xperia back after running this program ?
I had once the same problem I failed to repartition the internal storage but then I think I would have able to create the partition again using "adb shell Fdisk" actually i had seen the post on Xperia J or some device thread u need to find, but i failed cause there was 1 partition in which the recovery could hold something like that and bymistakely I deleted that and it went off permanently so be carefull before deleting the top most partition left on your phone. Look for that thread and give a try only for advance users, if sucessfull please do the help others. If I find the thread i will post the link over here.
Good Luck
Hey guys please help me....
I just bricked my xperia when I tried to organize e4 dual rom for xperia c....
Now I can't even turn it on..and when I connect it for charging only red light glows,...
I've tried Sony PC Companion,Wmshua Tools and SUS...but nothing worked...
Help me out...
Samuel Wankhede said:
Hey guys please help me....
I just bricked my xperia when I tried to organize e4 dual rom for xperia c....
Now I can't even turn it on..and when I connect it for charging only red light glows,...
I've tried Sony PC Companion,Wmshua Tools and SUS...but nothing worked...
Help me out...
Click to expand...
Click to collapse
Would you please elaborate sirr..about what you were trying..
What you flashed...Recovery mode reachable...??
Phone detected on pc as a device and all...
abhishekr700 said:
Would you please elaborate sirr..about what you were trying..
What you flashed...Recovery mode reachable...??
Phone detected on pc as a device and all...
Click to expand...
Click to collapse
Actually I tried to make a rom by myself..
Porting from mtk 6582 to 6589...and using stock xperia c kernel...
But after flashing the phone can't be turned on...
Just a red led light blinks when I connect to charger...
Also recovery can't be reached otherwise I would have flash other rom....
Samuel Wankhede said:
Actually I tried to make a rom by myself..
Porting from mtk 6582 to 6589...and using stock xperia c kernel...
But after flashing the phone can't be turned on...
Just a red led light blinks when I connect to charger...
Also recovery can't be reached otherwise I would have flash other rom....
Click to expand...
Click to collapse
If you can't access recovery,
Better flash Stock ROM.
Sent from my Micromax A46 using XDA Forums PRO
Senuah said:
If you can't access recovery,
Better flash Stock ROM.
Sent from my Micromax A46 using XDA Forums PRO
Click to expand...
Click to collapse
For flashing stock rom we need recover or other option is to use pc companion..
But Sony PC companion is also not detecting the device...
What to do now ?
if you get any solution pleas tell me because i have the same problem
Samuel Wankhede said:
For flashing stock rom we need recover or other option is to use pc companion..
But Sony PC companion is also not detecting the device...
What to do now ?
Click to expand...
Click to collapse
Can you put your phone into fastboot mode?
If yes, then try flashing stock ftf with the help of flashtool.
hitman-xda said:
Can you put your phone into fastboot mode?
If yes, then try flashing stock ftf with the help of flashtool.
Click to expand...
Click to collapse
Fastboot can't be reached.....
baselrabia said:
if you get any solution pleas tell me because i have the same problem
Click to expand...
Click to collapse
I guess we both have to give our phone to sony service centre...
Use PC companion.. click on update my phone..then Repair my phone..then it will download some files.. then select the model.. then it will say press vol down and connect usb..but it didnt work for me.. press vol up+vol down+power+plug in usb.. then it will download and flash your phone..
Hope it works..
Just Click on thanks if it works for you.. :good:
@abhishekr700 bro, i have done all types of connection (i.e vol down+ power, vol up+power, vol down+vol up+power, power alone, vol up alone, vol down alone) nothing detects my xperia C. Only thing happens is, the red led is glowing. reset button too not working. What next?
arul20be said:
@abhishekr700 bro, i have done all types of connection (i.e vol down+ power, vol up+power, vol down+vol up+power, power alone, vol up alone, vol down alone) nothing detects my xperia C. Only thing happens is, the red led is glowing. reset button too not working. What next?
Click to expand...
Click to collapse
Heya brother...okk are you sure that your cables are correct and that you have the usb drivers installed in your PC
Press the thanks button plzzz...
Sent from my C2305 using Tapatalk
abhishekr700 said:
Heya brother...okk are you sure that your cables are correct and that you have the usb drivers installed in your PC
Press the thanks button plzzz...
Sent from my C2305 using Tapatalk
Click to expand...
Click to collapse
Cables are correct. But, i am not sure about the drivers for c2305. Coz, i m plugging it for the first time. Its my friend's phone and after its bricked only i'm plugging it. I cant find the drivers outside. I have been trying to flash it for two days. Nothing helped.
arul20be said:
Cables are correct. But, i am not sure about the drivers for c2305. Coz, i m plugging it for the first time. Its my friend's phone and after its bricked only i'm plugging it. I cant find the drivers outside. I have been trying to flash it for two days. Nothing helped.
Click to expand...
Click to collapse
Drivers are very necessary in order to the device to be detected..... Without drivers my computer almost lost all hopes of connecting to my printer!!!
So what you need to do is that find the drivers for our phone.... It must be somewhere in forums or you can give a try to the google usb driverz
Press thanks
Sent from my C2305 using Tapatalk
Will try it bro.. Tried Google.. Nothing found.. Will try again and let u know..
arul20be said:
@abhishekr700 bro, i have done all types of connection (i.e vol down+ power, vol up+power, vol down+vol up+power, power alone, vol up alone, vol down alone) nothing detects my xperia C. Only thing happens is, the red led is glowing. reset button too not working. What next?
Click to expand...
Click to collapse
Have you got the drivers???
If not tel me i will upload them for you ...the ones I use...
Press thanks
abhishekr700 said:
Have you got the drivers???
If not tel me i will upload them for you ...the ones I use...
Press thanks
Click to expand...
Click to collapse
No bro i didn't get.. Tried hard . Can you pls upload for me!!
arul20be said:
No bro i didn't get.. Tried hard . Can you pls upload for me!!
Click to expand...
Click to collapse
Yes i will tomorrow for sure
Press thanks
Sent from my C2305 using Tapatalk
abhishekr700 said:
Yes i will tomorrow for sure
Press thanks
Sent from my C2305 using Tapatalk
Click to expand...
Click to collapse
Thanks bro. I am waiting!!
arul20be said:
Thanks bro. I am waiting!!
Click to expand...
Click to collapse
https://drive.google.com/file/d/0BzWBuFv6dGtYelF3dDhBY0lkLTA/view?usp=sharing
This as actually a software install it and it installs the drivers during installayion
Press thanks
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
sarry86 said:
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
Click to expand...
Click to collapse
does download mode works @sarry86
mohsin931 said:
does download mode works @sarry86
Click to expand...
Click to collapse
Yes it does but stays for 3 or 4 seconds then it restarts
sarry86 said:
Yes it does but stays for 3 or 4 seconds then it restarts
Click to expand...
Click to collapse
flashing does not work in recovery?
mohsin931 said:
flashing does not work in recovery?
Click to expand...
Click to collapse
Only factory data reset work but it doesn't change anything, i wish i could just make it detected on pc, just that for now
sarry86 said:
Only factory data reset work but it doesn't change anything, i wish i could just make it detected on pc, just that for now
Click to expand...
Click to collapse
how did it happened?
mohsin931 said:
how did it happened?
Click to expand...
Click to collapse
He received an ota update then all of a sudden a phone went off and it went to a constant bootloop till now
sarry86 said:
He received an ota update then all of a sudden a phone went off and it went to a constant bootloop till now
Click to expand...
Click to collapse
it is hardbrick remove battery and connect to computer and tell me is it detected
mohsin931 said:
it is hardbrick remove battery and connect to computer and tell me is it detected
Click to expand...
Click to collapse
No nothing even in device manager
sarry86 said:
No nothing even in device manager
Click to expand...
Click to collapse
usb is not recognized did you got this message?
mohsin931 said:
usb is not recognized did you got this message?
Click to expand...
Click to collapse
Nothing but sometimes i get the message "USB only charge interface"
mohsin931 said:
usb is not recognized did you got this message?
Click to expand...
Click to collapse
same method ashttps://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/ can be folowed to unbrick your phonebut first it needed to be dtected as Qualcom 9006 which require opening the phone and shortening specific pins
mohsin931 said:
same method ashttps://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/ can be folowed to unbrick your phonebut first it needed to be dtected as Qualcom 9006 which require opening the phone and shortening specific pins
Click to expand...
Click to collapse
Thanks bro i will try tomorrow and will let you know
If u still face the problem toss a new battery and check it ....or grab a old Nokia battery or which ever battery fits positive and negative connection in the phone. If the phone turns on its your BATTERY...ORIGINAL G PRO 2 BATTERY COSTS AROUND 180$ DO NOT BUY CHINESE KNOCK OFF......INFORMATION IS MEDICINE :good:
---------- Post added at 09:52 AM ---------- Previous post was at 09:51 AM ----------
sarry86 said:
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
Click to expand...
Click to collapse
It's the battery problem even if the battery looks good toss a new one and check before doing all this stuffs
sarry86 said:
Thanks bro i will try tomorrow and will let you know
Click to expand...
Click to collapse
hello bro the problem u have now is u have custom recovery installed on your phone and u received ota update and the phone try to install the ota update so after that your phone cant boot ur phone the phone is bootloop . if that is the problem u have to install twrp recovery and go to terminal type this code dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota then after that reboot your phone. If i help u dont forget the thanks bottom :good: