How much should i overclock this CPU to not make phone crash (Prestigio 4500)?
circa 1,4 phone works good, but hot, if i overclock to 1,68 or 1,7x phone crash after boot, i use to OC modified kernel from china phones rom (bedove or something like that) ..
Guys, what method to OC is better...
I change voltage etc, but cant make it stable..
thx
Hey
dromaczek said:
How much should i overclock this CPU to not make phone crash (Prestigio 4500)?
circa 1,4 phone works good, but hot, if i overclock to 1,68 or 1,7x phone crash after boot, i use to OC modified kernel from china phones rom (bedove or something like that) ..
Guys, what method to OC is better...
I change voltage etc, but cant make it stable..
thx
Click to expand...
Click to collapse
Hey brother you should not go over 1.3 ghz. There is mtk6577 processor which run on 1ghz and your is already overclocked to 1.2. Can u please share that kernel you have? I have mtk6577 and would like to try it. Thanks
lukasrb said:
Hey brother you should not go over 1.3 ghz. There is mtk6577 processor which run on 1ghz and your is already overclocked to 1.2. Can u please share that kernel you have? I have mtk6577 and would like to try it. Thanks
Click to expand...
Click to collapse
hi, i dont have now mtk6577 phone pretigio, now i have zopo zp998,and use it..
If your phone is a 1ghz, then OC to 1.5 is max you want to go. There are write ups here on XDA, just search. Going too high starts putting too much of a stain on the system. Under voltage can help, but you just can't be applying settings without knowing what they will actually do. There are write ups on XDA about that as well.
Try disabling your animations and other performance robbing settings and run the phone at 1.3 or 1.4. Other than that, you have some reading ahead of you. And make sure you backup up everything, before you apply settings to boot!!
Hit thanks if I helped.
delivered to you piping hot and fresh through quantum physics and pony express
Related
sory my bad english.
i have rom 2.3.4 . ( s-off, recovery, root done)
i want file kernel can Power Saving batteri ?
i disconnect wifi, buletooth , GPS, use GSM, but my phone use ~160mAH in standy ! hix
You should Try The Bricked Kernel http://forum.xda-developers.com/showthread.php?t=1256668
But be Carefull and Read Step for Step how to Flash it.
And Next Time you ask Something Plz give more Informations,do you use a Stock Rom?
Mod Rom?
And do you Use a App for Controling Cpu Speed etc?
Maybe you just have the Cpu Speed Set wrong when the Screen is Off
i set cpu low ( 192 ghz) when SCreen is off.
App for controling cpu : Cpu mater / onemand.
Stock rom 2.3.4. sense 3.0 ( remove app not use)
kernel you post :http://forum.xda-developers.com/showthread.php?t=1256668
have OC GPU but i don't want. hix . then i need app to see infomation GPU ?
Please help me ! thank
please ! help me.....
if you want features and pretty good battery life, go with the suggested bricked kernel, although it may still have bugs
if you want everything working perfectly, you control overclock, no gpu overclock (to my knowledge), practically no features, fast, excellent battery life (best if you ask me). go with stock or trinity, i suggest trinity though set them to ondemand
trinity
http://forum.xda-developers.com/showthread.php?t=1387690
stock
http://forum.xda-developers.com/showthread.php?t=1372649
Hello. Since i haven't found any info about that (yea i am noob here and most likely that question will be answered somewhere, but...) so i would like to ask you.
http://forum.xda-developers.com/showthread.php?t=1101218
I have recently flashed CyanogenMod 7 into my Samsung Galaxy 3 (i5800) and everything works fine. I just wanted to ask if this ROM version is OC or not? As far as i know it is possible to overclock galaxy 3 processor up to 1GHz. So Does this version do overclock my processor or doesn't? And if yes - for how much? Thanks in advance
EDIT: I flashed "ODIN -> CM7.1.0-GT-I5800_Alpha7.zip (130.35 MB)" this one version. Also if this one does not OC - where can i download oc version (800 or 1000MHz) since multiupload links are not working?
bambolis said:
Hello. Since i haven't found any info about that (yea i am noob here and most likely that question will be answered somewhere, but...) so i would like to ask you.
http://forum.xda-developers.com/showthread.php?t=1101218
I have recently flashed CyanogenMod 7 into my Samsung Galaxy 3 (i5800) and everything works fine. I just wanted to ask if this ROM version is OC or not? As far as i know it is possible to overclock galaxy 3 processor up to 1GHz. So Does this version do overclock my processor or doesn't? And if yes - for how much? Thanks in advance
Click to expand...
Click to collapse
It overclocks to 1GHz or 1.1 GHz. Can't remember and there is no NON-OC version available. Also, the maximum overclock for our phone is 1.4 GHz but very few people find it to be stable.
Thank you very much, that's all i wanted to hear. Cheers
Hello,
i have Optimus Me and all i want is to overclock it a bit, without Android upgrade or changeing the mode. I have this kernel "kernel-pecan-drap-oc-0.1-rc3.zip" downloaded and i put custom recovery on the phone.
So i dont want anything to be changed on the phone, just ability to overclock, so is this it, just kernel flash?
Thank You XDA
Phone Info:
-------------------
Model: LG-P350
Product: Pecan
Android: 2.2.2
Kernel: 2.6.32.9
Build: FRG83
Software Version: V10a
Well I'm not a developer but if you want to run the stock OS over clocked you can.
first you have to root your phone using gingerbreak using that link:
http://forum.xda-developers.com/showthread.php?t=1044765
then install Custom Recovery AmonRA, follow instructions here:
http://forum.xda-developers.com/showthread.php?t=1080911
OR try:
http://forum.xda-developers.com/showthread.php?t=1421198
after that is finished you have to install your kernel I think you already have it but here is the link:
http://forum.xda-developers.com/showthread.php?t=1259908
and lastly on your phone you install an app called set cpu link here:
http://forum.xda-developers.com/showthread.php?t=505419
Please read everything carefully as you go along...also... not all CPU's overclock to the maximum available it may freeze if you do... so gradually test your range till you find a stable overclock amount...
Eg: mine is stable at 748Mhz... others get 787Mhz or even higher to 825Mhz
I'm very new to this as well so I can't explain why CPU's have different stabilities.... maybe some one more knowledgeable can help...
good luck and have fun... eventually i recommend you use a custom rom...its alot better.. but your choice for now can be used as well...
Not all CPUs can reach max speed, because there's always small variance in the production, and that small variance causes the phone to be unstable at high clock speeds.
I, for example, can't overclock my Wildfire to 768, because it's just hangs, but other users are running at that clock speed just fine.
yea i figured that much from reading a few posts... that kinda sucks tho...lol.. jus gotta be lucky when gettin your fones...
need help
safest range to overclock my lg optimus me p350
kernel 2.6.32.9
cyanogen mod electroz v3
What is the lastest and perormance kernel for stock custosdm roms
Yajnab's kernel is the latest
I use jana v7 kernel for performance..
I try jana's its goof but very big problems on 825 mhz
Dude if you overclock that much any kernel will give you a problem and it also may be harmful to the phone.
I know but I want only try 825
Why our cpu cann't overclok 800 mhz
Galaxy ace,young and gio 800 mhz
but we have got same cpu?
TurkishXDA said:
I know but I want only try 825
Why our cpu cann't overclok 800 mhz
Galaxy ace,young and gio 800 mhz
but we have got same cpu?
Click to expand...
Click to collapse
It's your device's problem. Mine can run even on 864mhz
My friend has a Ace which cannot run after 825mhz.
Secondly,there's not much increase in performance after 750ish frequency.
Don't go by the numbers, the performance depends on software+hardware combined. Young works similar to our device inspite of higher frequency. (because it's broadcomm,and broadcomm ain't good )
I'm stand thanks.
Hey Everyone I Don`t have a depth knowledge about Android ..Just I want to know I want TO know whether installing Cynogenmod ROM will Overclocked My Mobile ??
(ie) 600 Mhz to some Mhz...
plz tell me anyone !!!
Nope it wont
Yuvaraj03 said:
Hey Everyone I Don`t have a depth knowledge about Android ..Just I want to know I want TO know whether installing Cynogenmod ROM will Overclocked My Mobile ??
(ie) 600 Mhz to some Mhz...
plz tell me anyone !!!
Click to expand...
Click to collapse
Nope Bro it wont...By default the processor speed is 600 mhz but u can increase it in the settings...
First u have to enable Developer options i.e., Settings-->About Phone-->Tap BUILD NUMBER rapidly(Around 10 times)...
Now to check ur processor speed or to increase it Go to Settings-->Performance-->Just tap OK-->Processor :good:
Yuvaraj03 said:
Hey Everyone I Don`t have a depth knowledge about Android ..Just I want to know I want TO know whether installing Cynogenmod ROM will Overclocked My Mobile ??
(ie) 600 Mhz to some Mhz...
plz tell me anyone !!!
Click to expand...
Click to collapse
prabhuinbar said:
Nope Bro it wont...By default the processor speed is 600 mhz but u can increase it in the settings...
First u have to enable Developer options i.e., Settings-->About Phone-->Tap BUILD NUMBER rapidly(Around 10 times)...
Now to check ur processor speed or to increase it Go to Settings-->Performance-->Just tap OK-->Processor :good:
Click to expand...
Click to collapse
prabhuinbar is right in what he says but not all the Roms as standard here will have the ability of overclocking your processor, I think mainly the cm11 (kitkat) roms have it included or the developers have an extra update.zip that when flashed can OC. Check out the ROMS section, have a read of what is and isn't included. They are all quite easy to install, backup phone, wipe, install new rom, install oc update.zip if needed. Then as above what prabhuinbar said.
It depends from ROM.
In some ROMs you won't be able to overclock until you flash custom kernel that supports overclocking.
And some ROMs/custom kernels can have different overclocking profiles(in some you can clock to 700Mhz in others it's possible to 900Mhz).
Basically overclocking is sometimes good but my my personal experience it may cause battery drain,random reboots;in some cases it can burn NAND,not happend to me.