Hey Everyone I Don`t have a depth knowledge about Android ..Just I want to know I want TO know whether installing Cynogenmod ROM will Overclocked My Mobile ??
(ie) 600 Mhz to some Mhz...
plz tell me anyone !!!
Nope it wont
Yuvaraj03 said:
Hey Everyone I Don`t have a depth knowledge about Android ..Just I want to know I want TO know whether installing Cynogenmod ROM will Overclocked My Mobile ??
(ie) 600 Mhz to some Mhz...
plz tell me anyone !!!
Click to expand...
Click to collapse
Nope Bro it wont...By default the processor speed is 600 mhz but u can increase it in the settings...
First u have to enable Developer options i.e., Settings-->About Phone-->Tap BUILD NUMBER rapidly(Around 10 times)...
Now to check ur processor speed or to increase it Go to Settings-->Performance-->Just tap OK-->Processor :good:
Yuvaraj03 said:
Hey Everyone I Don`t have a depth knowledge about Android ..Just I want to know I want TO know whether installing Cynogenmod ROM will Overclocked My Mobile ??
(ie) 600 Mhz to some Mhz...
plz tell me anyone !!!
Click to expand...
Click to collapse
prabhuinbar said:
Nope Bro it wont...By default the processor speed is 600 mhz but u can increase it in the settings...
First u have to enable Developer options i.e., Settings-->About Phone-->Tap BUILD NUMBER rapidly(Around 10 times)...
Now to check ur processor speed or to increase it Go to Settings-->Performance-->Just tap OK-->Processor :good:
Click to expand...
Click to collapse
prabhuinbar is right in what he says but not all the Roms as standard here will have the ability of overclocking your processor, I think mainly the cm11 (kitkat) roms have it included or the developers have an extra update.zip that when flashed can OC. Check out the ROMS section, have a read of what is and isn't included. They are all quite easy to install, backup phone, wipe, install new rom, install oc update.zip if needed. Then as above what prabhuinbar said.
It depends from ROM.
In some ROMs you won't be able to overclock until you flash custom kernel that supports overclocking.
And some ROMs/custom kernels can have different overclocking profiles(in some you can clock to 700Mhz in others it's possible to 900Mhz).
Basically overclocking is sometimes good but my my personal experience it may cause battery drain,random reboots;in some cases it can burn NAND,not happend to me.
Related
sory my bad english.
i have rom 2.3.4 . ( s-off, recovery, root done)
i want file kernel can Power Saving batteri ?
i disconnect wifi, buletooth , GPS, use GSM, but my phone use ~160mAH in standy ! hix
You should Try The Bricked Kernel http://forum.xda-developers.com/showthread.php?t=1256668
But be Carefull and Read Step for Step how to Flash it.
And Next Time you ask Something Plz give more Informations,do you use a Stock Rom?
Mod Rom?
And do you Use a App for Controling Cpu Speed etc?
Maybe you just have the Cpu Speed Set wrong when the Screen is Off
i set cpu low ( 192 ghz) when SCreen is off.
App for controling cpu : Cpu mater / onemand.
Stock rom 2.3.4. sense 3.0 ( remove app not use)
kernel you post :http://forum.xda-developers.com/showthread.php?t=1256668
have OC GPU but i don't want. hix . then i need app to see infomation GPU ?
Please help me ! thank
please ! help me.....
if you want features and pretty good battery life, go with the suggested bricked kernel, although it may still have bugs
if you want everything working perfectly, you control overclock, no gpu overclock (to my knowledge), practically no features, fast, excellent battery life (best if you ask me). go with stock or trinity, i suggest trinity though set them to ondemand
trinity
http://forum.xda-developers.com/showthread.php?t=1387690
stock
http://forum.xda-developers.com/showthread.php?t=1372649
How to overclock tablet Omega MID7004 higher than 1008mhz ? I have root and what next ?
Max value in cpu overclocking programs is 1008mhz (JellyBean system version ) . I cant find custom rom for this android device .
Thanks for help
Megaboy18 said:
How to overclock tablet Omega MID7004 higher than 1008mhz ? I have root and what next ?
Max value in cpu overclocking programs is 1008mhz (JellyBean system version ) . I cant find custom rom for this android device .
Thanks for help
Click to expand...
Click to collapse
Different kernels support different OC speeds so flash a custom kernel.
Question
Nigeldg said:
Different kernels support different OC speeds so flash a custom kernel.
Click to expand...
Click to collapse
So I must creat custom rom for my device/edit original rom or unlock bootloader ?
Root failed
hi guys, just stumbled upon this thread.
i really need help rooting my omega mid7004 7" http://support.platinet.pl/tablets-2/ot7004/
what i did was that first i got my adb-driver with help of this http://forum.xda-developers.com/showthread.php?t=2157207
and then i tried the tutorial shown here (http://forum.xda-developers.com/showthread.php?t=1886460).
unfortunately it didnt work for me. what did i do wrong or what tutorial did you use to make it work?
regards, p
How much should i overclock this CPU to not make phone crash (Prestigio 4500)?
circa 1,4 phone works good, but hot, if i overclock to 1,68 or 1,7x phone crash after boot, i use to OC modified kernel from china phones rom (bedove or something like that) ..
Guys, what method to OC is better...
I change voltage etc, but cant make it stable..
thx
Hey
dromaczek said:
How much should i overclock this CPU to not make phone crash (Prestigio 4500)?
circa 1,4 phone works good, but hot, if i overclock to 1,68 or 1,7x phone crash after boot, i use to OC modified kernel from china phones rom (bedove or something like that) ..
Guys, what method to OC is better...
I change voltage etc, but cant make it stable..
thx
Click to expand...
Click to collapse
Hey brother you should not go over 1.3 ghz. There is mtk6577 processor which run on 1ghz and your is already overclocked to 1.2. Can u please share that kernel you have? I have mtk6577 and would like to try it. Thanks
lukasrb said:
Hey brother you should not go over 1.3 ghz. There is mtk6577 processor which run on 1ghz and your is already overclocked to 1.2. Can u please share that kernel you have? I have mtk6577 and would like to try it. Thanks
Click to expand...
Click to collapse
hi, i dont have now mtk6577 phone pretigio, now i have zopo zp998,and use it..
If your phone is a 1ghz, then OC to 1.5 is max you want to go. There are write ups here on XDA, just search. Going too high starts putting too much of a stain on the system. Under voltage can help, but you just can't be applying settings without knowing what they will actually do. There are write ups on XDA about that as well.
Try disabling your animations and other performance robbing settings and run the phone at 1.3 or 1.4. Other than that, you have some reading ahead of you. And make sure you backup up everything, before you apply settings to boot!!
Hit thanks if I helped.
delivered to you piping hot and fresh through quantum physics and pony express
Hello everyone, this is my first topic on XDA after lurking for a while!
Anyways, today my topic is going to be concerning an Android Mini Tablet called the PlayMG. It's a WiFi tablet by a startup that's now gone bankrupt. The actual name of the device (development-wise) was the ACTScom A930. It was supposed to be a small 4 inch tablet like an iPod Touch with Android. You can find various info by googleing the name.
The specs go as stated:
ARM TCC8920 @ 960 MHz
1 GB RAM
4 GB DDR3 Storage
Android 4.0.4 ICS
Geekbench test:
http : //browser.primatelabs . com/geekbench3/356000
(sorry, I'm new so I can't post links until 10 posts)
The device was pretty cheap (around 90 dollars) and since then I've rooted it. I had to use SafeRoot because there is virtually no support anywhere for this device. As you can tell from the specs above, the device is fairly weak. My goal is to overclock the device to run at around 1.10-1.25 Ghz, however I'm stuck on the stock ROM and kernel. And as you can probably guess, there is no one to develop and overclockable Kernel for it. I have a few questions that I would like answered:
I was wondering are there any methods to overclock the stock kernel? Is that pretty much impossible?
Are there any ICS (or any) kernels that might work on this device?
Could I build the Kernel myself?
^Questions regarding this:
-Since the company went bankrupt, I can't really obtain a stock kernel, Could I somehow extract it from the device itself?
-If I were able to get the kernel, where can I go on XDA to guide me to building an overclockable kernel?
Does anyone have any ideas on how to overclock this device? I'm accepting all ideas, good or bad!
Thank you everyone in advance. All responses/knowledge is welcome!
Im also looking forward to this... Have a samsung galaxy star pro... Have compiled stock kernel from source successfully... It works... Nw i need to add oc nd everythung... How shuld i do it??? It is a spreadtrum device...
Anyone?
Bump
Hello Androiders,
I'm not sure if this makes complete sense but is there a way we can modify an existing kernel from an ASOP based ROM to support CPU overclock?
There's a ROM I use for my Xperia Acro S which lets me overclock to only 1.5 Ghz using the Mokee kernel in the flash file.
But there are other ASOP based ROM for my device which support upto 1.89 Ghz overclocking. Please let me know if there is a way to modify the existing kernel to support higher CPU clock speeds.
I searched Google and XDA but couldn't find any tutorial or discussion about this, please suggest how this can be accomplished!
LOVE and PEACE,
Syed