If anyone here has tried to use an i.tech stereo headset (like the R35 or S35) or other A2DP headset and has been dissapointed with the sound quality (commonly referred to as a "ringing" distortion or hissing over the sound) using the A2DP for tornado hack, its because the MS Bluetooth Stack isn't 100% compatible with all (most) headsets. Its particularly noticeable on i.tech, but the reduced quality is true on many others as well.
In case you didn't know, Blueplayer is a standalone app that streams music to A2DP headphones even if the phone doesn't support A2DP in its own stack! That means any phone with bluetooth (some even claim older 1.1 devices as well) can bypass the usual MS stack in our devices and stream stereo sound directly to a compatible headset!
The software was written for Nokia S60 devices initially, but there have been Pocket PC and java versions (only compatible with specific phones) released since then as well.
I'm very annoyed by the sound quality of my itech R35 paired with my imate SP5. I'm 100% sure that software such as blueplayer would solve this problem. However, the PPC and java versions don't seem to work on my device.
Can anyone help me figure out how to make this work? I tried extracting the files from the PPC cab file, but its complaining about missing libraries. The install may add some things to the registry that I'm missing.
Better yet, does anyone have anything like this for WM Smartphone?
what are you missing? I got blueplayer running with my S35 and the quality is excellent and range good(for me)...
Unfortunately I am using a Wizard...
I wish I could get it working!
I can't figure out what it is, but I'm having trouble.
Normally I can make any app work (even if its for PPC) by pulling the files off of a PPC installation, and run the .exe on my smartphone and it just works.
But I keep get errors about libraries not existing or being in the wrong place. I need to figure out exactly what happens when the app is installed- what files go where, any registry changes, etc... There's gotta be a way to make it work on smartphone!
From memory,
There are a few files and registry settings that I can remember but barely, but if you want I can try to install it again. I removed it because I don't use MP3s anymore..
Yeah, if you don't mind helping me out, that'd be amazing (also for the smartphone community as a whole).
Why don't u use mp3's anymore?
I can just look up the settings for you, you got to do the work ;-)...
I find them too large for my 1Gb MiniSD, using AAC+ now... nice quality and file size.
Just PM me what you want to know...
Well, I don't know what kind of entries this will place in the registry. To be honest, I'm not sure how to check myself either. Is there a way to tell EXACTLY what a .cab does?
Found it!
Interesting program for those in my situation:
http://thinkabdul.com/2006/12/20/ms...nformation-from-windows-mobile-cab-xml-files/
lets you see exactly what steps a cab installation goes through. Any reg. items, what the actual filenames are, what directories they are placed in, etc...
Amazing little tool.
However, I still haven't gotten blueplayer to work on my sp5... I wonder why?
thanks for the link, I needed something like that as well, going to compare the differences in the Widcomm bluetooth hacks...
BTW, how do you get blueplayer to work on a smartphone anyway without the touch screen?
Oh, simulating a touchscreen is easy... most apps let you navigate using the joystick, but it gets annoying and sometimes a touch is needed to click (for example an ok button).
There's a great little app call SPhelper that places a mouse pointer on your screen that can be navigated using the directional joystick, and "clicked" like a screen tap.
Its pretty cool.
Anyway, the problem is that I can't get Blueplayer to operate, even with all the .dll files in the right places. It says its missing something.
new2city said:
I can just look up the settings for you, you got to do the work ;-)...
I find them too large for my 1Gb MiniSD, using AAC+ now... nice quality and file size.
Just PM me what you want to know...
Click to expand...
Click to collapse
Here's all I know:
I poked around in the .cab installation and found that there are 4 .dll's that go in the \windows dir (msibtstk.dll, msibtapi.dll, CHS.dll and TW.dll), and two .exe program files that go in program files\msi\blueplayer (STLoader.exe, and MPOBCE.exe). AFAIK, there don't seem to be any registry entries that it inserts.
Now, I've done this with PPC apps before, normally all I have to do is run the .exe after all files are in place, and it will work (obviously with some minor annoyances due to missing the touch screen).
However, every time I hit MPOBCE.exe, all I get is:
"Alert
Can't find MPOBCE or one of its components. Make sure the path and filename are correct and that all the required libraries are available."
There's gotta be something I'm overlooking... Anyone?
No man, there are some(I found some) entries, but I thought you were set and removed them already..
will reinstall and get back to you again...
BTW do you do a full backup of your phone? I use SPB backup and it is good..
oh, cool, I couldn't find any... let me know!
entries but not sure if working...
Here are the two registry inputs(rename to *.txt) I found on my system.. Unfortunately, I couldn't get it to work this time as I am using Widcomm bluetooth stack... wonder why.... Last time I used this was with MS Stack on...
new2city said:
Here are the two registry inputs(rename to *.txt) I found on my system.. Unfortunately, I couldn't get it to work this time as I am using Widcomm bluetooth stack... wonder why.... Last time I used this was with MS Stack on...
Click to expand...
Click to collapse
No, that makes sense. The Nokia one is designed to operated by tunnelling through the s60 stack, and the WinCE version was most likely designed assuming the MS one.
No go... I entered all this stuff exactly like you said, and I get the same errors.
Interesting to note is the drivers reg keys already existed!
It appears that the other exe (stloader.exe) did run and I think entered those keys. The actual program tho, seems to not run (and therefore never entered the proper keys, I'm guessing).
Sorry man.. to get your hopes up..
Right now, I got Axim Widcomm Stack running on my Wizard, but still get the memory issue after a long time powering off bluetooth.
oh well, back to waiting and testing new stacks..
Hey, I've got another idea if you wouldn't mind helping me some more...
Could you try to manually install it the way I've been doing on your pocket PC device?
The reason I ask is because it will determine if there's some sort of PPC-specific code (which I don't think I've ever encountered or even heard of before).
I attached the files and directory structure that I extracted from the cab. If you could, please try uninstalling BluePlayer and tell me if you can get this to run by manually copying the files here.
If it doesn't work for you either, than its because my method is flawed and I'm missing something here... and I shouldn't give up yet!
ok, I will give it a go, but most probably I can only go as far as getting the program to run... Feel comfortable with the widcomm stack, don't feel like disabling it..
just give me a few hours.. my stupid SD USB card reader not working properly... got to look for my cable.. damn!!
good news is, the program starts with the exceptions
1)at first start after putting the files in place, the program starts a few times with the L2Cap error...
2)After a few failed restarts, followed by a softreset, the registry settings in drivers(L2Cap..) are in place and the program runs without error.
3)Now it's up to you to test it with MS stack bluetooth on, as I cannot confirmed this for you.. good luck buddy...
sooo, because i'm a cheap basta*d i'm going to buy a dvd player with gps for my car on ebay and i've noticed a lot of them, or even all of them?, run on windows ce. So here's my question, will any cab run on windows ce? i mean, winmo 5, 6, 6.1 and everything before that ran on windows ce right? so how easy would it be?
Picture this, a 8-16gb sd card, jam it into the card reader and start up S2P (slide to play) for one bad ass cover flowin' music center! obviously other thing would be useful to, and since these bad boys are only like $300 buckaroos it isn't a bad idea, especially for us gadget pr0n guys right?
what about flashing a rom from a SD card (only heard rumors/speculation about that, probably not possible)? or just loading up manila 2d/3d via throttle launcher and getting the think looking pimp? no phone antenna, no problem, just sync it through the bluetooth and make calls (new app required i'm guessing, or at least adapt/beautify some existing cab/exe). get internet sharing to work on it somehow and you're seriously looking at a pretty cool carputer. well, with all i'd want to use one for anyways. Who wants to do more than what a good rom on one of our phones can do while in a car anyways?
I'm not sure if it will run out of the box like that, with nothing more than some cabs on and sd card, or if you have to do something else (file explorer and whatnot), but i figured xda would be the best place to start for the right answers. I've never gone wrong before with you guys, so speak up! let's see what we come up with!
or at least give me a link to a better place if you know of one and i'll get off my soapbox...
anyways, i've got access to a few vogues, a wing/herald, and a touch pro to do testing with, along with the dvd player/win CE unit--in about a week or two that is--so i'm more than happy to put it on the table.
Man i hope you guys are reading this and as pumped as i am.
anyways, pm me with anything, or i'll just keep looking to see if anyone else posts here
amruthwo
bump
does anyone know if this would even work?
This could work.
First of all, you need to look up how to disable OEM's shell (factory "software" of the player) and enable Windows CE interface.
Next you either install Handheld PC apps, or install libraries which allow you to run applications from PocketPC.
Myself I tried it with a cheap GPS. Yeah, WinCE + apps are a major step up from maps only, but it is not anywhere close to even a non-phone PPC. Because of, for example, lack of WiFi. The big advantage is, that I can install any WinCE compatible map instead of outdated OEM maps.
Hope I am right, and this helps
Where did you find information about your GPS? I just got one, model# TID-7626GPS that I'm going to try to mod, but i can't find information about how to get the WinCE.
if you could pass on any links to places i could look it would help a ton. For how do disable the factory OEM and those libraries?
First you need to find out real manufacturer of your device. I googled model name you said but there's nothing
Or, connect that device via ActiveSync (yes, the same) and see if there's a file \Windows\autorun.inf
If it exists, backup it. Then change it so it will load \Windows\explorer.exe
That should unlock WinCE UI.
However, the file may not exist. In this case you have to look for instructions over the web.
Hmm, ok, I'm here to learn some new things about Mobile Operating systems and software, so I figured a good way to start learning is to ask questions. Anyways, I have an old GPS, a Mio C310x to be exact, anyone who has used it before know's its dead and no longer useful. So, I want to give it another "life" as a possible PDA, or mobile computer workstations. I wanted to know how I can install a new, clean version of WINCE, hopefully someone knows what I'm talking about. It currently has a copy of WINCE 4.2 installed on it. I managed to boot it into factory management menu and found UPGRADE WINCE. Upon entering that screen, I found UPGRADE WINCE FROM USB and UPGRADE WINCE FROM SD. Well, not knowing what to do, I went with USB, apparently Win7 doesn't like it and wont understand it, perhaps I'm missing something? Is there a special software I need? Any help will be much appreciated.
Hi there. I have some issues I wanted to ask about.
So, I have two issues on my versions of Bliss. The biggest one, most likely, has to do with the sound. I have two Venue Pro tablets. One is Venue Pro 7140, and the other 5130.
There are sound issues with the cards loading properly. However, I have looked into the issue. Lineage latest for example supports both tablets' sound cards. And after looking into the init.sh file (yes, I'm set up to be able to make some edits if that helps), I noticed that both systems use the same commands to load sound configuration settings. I wanted to ask if it was possible to transplant the sound configuration settings. I'd have tried this already, but it mentions loading from proc, which is a virtual directory, and I have no idea where it physically references on the system image. Could I ask where the sound settings are held in Bliss/Androidx86?
Secondly, I was having some issues with sleep mode not working properly. I know there's a few different settings like Suspend Ram, Suspend Freeze, etc. In Bliss, I see a somewhat related looking section, but I don't fully understand it. Can I ask how this works?
Alternatively, if these questions are more something I should be asking the Android x86 group, any chance I could be pointed in the right direction? I'm pretty new to all this. Thanks!
Please post this in the official development thread for Bliss OS Pie.