My phone (T-mobile Wing) has Open Touch v3.0 installed on it, but the problem is that every few minutes during a call, it makes a beep and the call counter restarts at 0. Later when i check my phone, i have a missed call from the person I was on the phone with. I don't know why it does this and would like to fix it. Anyone have an idea? I think its a rom setting, but I don't know how to disable it.
My phone has a very noticeable delay on incoming calls. I'll see it light up and flash for a bit, take a few seconds to get caller ID, then it will finally ring once before going to voicemail. All the while the caller is hearing the phone ring but I'm not...I tested it. Since I don't stare at my phone all day I have a high volume of missed calls because many times I only get the last ring. Any ideas what's going on? I tinkered with settings in Advanced Config and DiamondTweak. No dice. I'm using the stock Fuze Rom.
Isn't this normal behavior?
I've set my Kaiser on GSM mode and I can hear calls coming in on my computer's speakers a full 2-3 seconds before the phone actually rings.
diar said:
My phone has a very noticeable delay on incoming calls. I'll see it light up and flash for a bit, take a few seconds to get caller ID, then it will finally ring once before going to voicemail. All the while the caller is hearing the phone ring but I'm not...I tested it. Since I don't stare at my phone all day I have a high volume of missed calls because many times I only get the last ring. Any ideas what's going on? I tinkered with settings in Advanced Config and DiamondTweak. No dice. I'm using the stock Fuze Rom.
Click to expand...
Click to collapse
I have the same problem (htc org. rom)
Maybe this will work
I noticed that when someone calls my phone, they get two rings before my ringtone turns on.
After a second, my Fuze's LED starts flashing, then my ringtone starts playing after another second.
I have an idea:
1. Go into "Start > Settings > Phone"
2. Go to the "Services" tab
3. Highlight "Call forwarding" and then click the "Get Settings..." button.
4. Change the "Forward after:" dropdown box to something higher (e.g. "30 seconds")
It won't help the ring delay, but I think this will give you a little more time before the call is sent to your voicemail. I haven't tried it, but let me know if that helps
NuShrike said:
Isn't this normal behavior?
I've set my Kaiser on GSM mode and I can hear calls coming in on my computer's speakers a full 2-3 seconds before the phone actually rings.
Click to expand...
Click to collapse
I wouldn't call this normal. This is the first mobile phone that I've had that has had delays that long. If I didn't keep my phone next to me for most of the day, I'd probably miss more of my calls as well.
adamantypants said:
I wouldn't call this normal. This is the first mobile phone that I've had that has had delays that long. If I didn't keep my phone next to me for most of the day, I'd probably miss more of my calls as well.
Click to expand...
Click to collapse
I agree with you, this lag is very big problem, I missed a lot of calls, most of people must call me again because they are forwarding to voicemail at first time before I find TP (I cannot change in forwarding to 30 sec.
I'm wondering how it is in Diamond.
This is very frustrating. Nothing seems to fix this problem. I've reduced the call ID match to five digits instead of eight. I've made sure that Ring Time is set to "without delay" in DiamondTweak. I'll try the idea to change the call forwarding time but this seems to be a major problem in the OS itself. With this issue, Voice Command problems, the GPS lag and other issues I might have to jump to another phone.
Do cooked ROMS have these same issues?
I've got the same issue.. using T.I.R. V8R ROM, so yes, this delay is present also on custom ROMS. It has to do with the dialer skin?
This was discussed in a thread on an app that causes the vibrate pattern to match the ring pattern in hacks & discussions (I think called VAlert). The vibrate pattern starts immediately and the ring is delayed so the app isn't perfect (unless you build a delay into the vibrate but that's separate). The solution seems to be an app from tweaks2k2.net that I hear removes the delay. This is an issue with all WM phones. I haven't tried tweaks2k2 but I hear it works.
the tweaks2k2 fix - to eliminate the 3 second ringer delay - didn't work for me. so i went into the network phone settings and set the call forwarding to 25 seconds (it was 10). that didn't fix the ringer delay but now at least my phone rings three or four times before going to voicemail. i guess that will have to do for now.
diar said:
the tweaks2k2 fix - to eliminate the 3 second ringer delay - didn't work for me. so i went into the network phone settings and set the call forwarding to 25 seconds (it was 10). that didn't fix the ringer delay but now at least my phone rings three or four times before going to voicemail. i guess that will have to do for now.
Click to expand...
Click to collapse
it don't work sorry
Doing some debugging, on the Fuze at least the ringer delay seems to be tied to the bloatedness of the dialer.. it has a whole bunch of imports so its loading alot of stuff up every time you get an incoming call.. I'm afraid the only solution for this will be a dialer that does not bring in those kind of dependancies (PTT, Video Share, G-Sensor, etc)
The fastest way to go would be using the default windows dialer, but you'd lose all that functionality.. but hey. It would ring instantly!
I'll look into stripping the dialer from my clean ROM and providing a cab..
Confirmed. Removed the AT&T dialer skin from my rom and called my phone, rang as fast as any other phone would.. So the dialer skin is indeed the culprit.
Dang AT&T. Dang them and all their bloatware.
I'm going to corporate store to complaint. To all of them within a 10 mile radios.
I've posted my Beta 1.5 with the dialer removed. It's not an official fix by AT&T, but it is a fix..
I'll see if I can whip up a .cab to stop the dialer from loading in the stock AT&T ROM, that should help there too.
i like this dialer...but not that much. how do i disable it? in advanced config, i saw an option to enable the phone dialer skin or the default windows mobile dialer. would switching to the default fix it without causing any other problems?
EDIT: switched to default dialer and that fixed it. it also seems to have fixed the problem of having to re-enter the data connection password after a soft reset.
This set of cab's should do the job for anyone who doesn't want to install Advanced Config (it's a single registry entry HKEY_LOCAL_MACHINE\Security\Phone\Skin - Enabled=0/1)
Wow it really is about two seconds before the phone rings. Hm I never missed a call yet on this phone. where do you keep your phone that it takes so long to answer it?
AT&T's network lets you set the number of seconds before the call rolls over to voicemail, as do others, I believe the default on AT&T is 20 seconds, with a minimum of 5 and a maximum of 30, so if someone has it set to 5, that leaves only 3 seconds..
Of course they could just set it higher, but that's a different issue
So then a simple fix would be to go into your voicemail and set it to 22 seconds and then you still have the same time to pick up that phone. But still how does the 2 second dely really make you miss all them calls?
The following problem happens every time. If I am in a call and a another call comes in I get that bip in the headset. I look at the screen and see the 2nd caller, with a few options like answer, reject, etc.
The problem is that if I don't touch the screen and just let the 2nd caller keep calling, when I put the phone to my ear to continue the first conversation, the phone automatically switches to the 2nd call and puts the first one on hold.
This is incredibly annoying and even put me in cumbersome situations because the 2nd caller was on without me knowing it.
I can replicate this every single time, my sister as well on her Z3 compact, so it's a software problem.
Any solutions?
If anyone else has this problem just deactivate smart call handling from settings. Problem solved. Unfortunately we lose the smart answer as well.
ok this is a weird problem
my own fault
phone is the OnePlus one obviously.
have been having ongoing small problem with the dialer, as i use DW dialer.
sometimes when i went to make an outgoing call the stock dialer would also load and i would have to push the call button twice.
small problem but annoying.
so i went into the settings>apps>phone
and cleared the phone setting >launch by default.
this has fixed the outgoing calls problem
however now when i have incoming calls it doesnt bring up the window to let me answer them. the phone kind of hangs while the incoming call is ringing.
i can get back to the home screen. but there is no way to answer the call.
so i need a way to reassign the incoming calls to the phone.
i dont get any notification on the phone itself. just the ringing phone.
there is no way at all to answer the call - cant swipe down.
the only thing i can do is wait for the call to end. then see who is in my missed calls and ring them back.
please help
cheers
suttosnax said:
ok this is a weird problem
my own fault
phone is the OnePlus one obviously.
have been having ongoing small problem with the dialer, as i use DW dialer.
sometimes when i went to make an outgoing call the stock dialer would also load and i would have to push the call button twice.
small problem but annoying.
so i went into the settings>apps>phone
and cleared the phone setting >launch by default.
this has fixed the outgoing calls problem
however now when i have incoming calls it doesnt bring up the window to let me answer them. the phone kind of hangs while the incoming call is ringing.
i can get back to the home screen. but there is no way to answer the call.
so i need a way to reassign the incoming calls to the phone.
i dont get any notification on the phone itself. just the ringing phone.
there is no way at all to answer the call - cant swipe down.
the only thing i can do is wait for the call to end. then see who is in my missed calls and ring them back.
please help
cheers
Click to expand...
Click to collapse
I've been having this problem for a few days now. Phone rings but no UI for me to answer the phone call. Any solution to this yet? Thanks.
U have to tell which ROM u r using. There should be some option in settings for accidental phone wake up (Something like that), you have to disable that. Search in the settings.
I have updated to 5.1.1 but problem is its not showing the name when incoming call....only showing first letter of the name how can we find who is calling
I've just solved this problem on my phone - I'd blocked notifications from Dialler:
Settings --> App Notifications --> Dialler --> Deselect Block
Man!! This is a lifesaver. How come this solution is not available elsewhere. Thanks a lot!!!!
I have a Galaxy S5 Active and have recently started having a problem. Occasionally when I dial a number, no sound will be output even though the phone is making the call, and the timer at the top corner counts as if the call is working. I'd say it does this about 1 out of 5 calls, I have to hang up and call back and it will work fine. I am not positive, but I think this may have started with the recent 4.4.4 update. I really dont want to restore my phone if not necessary.. anybody heard of this issue?