The following problem happens every time. If I am in a call and a another call comes in I get that bip in the headset. I look at the screen and see the 2nd caller, with a few options like answer, reject, etc.
The problem is that if I don't touch the screen and just let the 2nd caller keep calling, when I put the phone to my ear to continue the first conversation, the phone automatically switches to the 2nd call and puts the first one on hold.
This is incredibly annoying and even put me in cumbersome situations because the 2nd caller was on without me knowing it.
I can replicate this every single time, my sister as well on her Z3 compact, so it's a software problem.
Any solutions?
If anyone else has this problem just deactivate smart call handling from settings. Problem solved. Unfortunately we lose the smart answer as well.
Related
HI
when i get a incomming call. and talk with them, the sound cuts from time to time.. its realy annoying, it is some fix to this?
is it only on my phone this is a problem?
No, i have the same problem. Actually this is my first HTC Phone, and i have never witnessed such a ****ty call quality.
Phone call - Sound Cut
Hello,
I Have the same problem.
very frequent while using speaker phone !
time to time in normal phone call.
VERY ANNOYING
There's another thread which may describe what you're taking about. The thread seems to conclude it's a hardware problem.
http://forum.xda-developers.com/showthread.php?t=422322
I have the same problem too, but only in the first five seconds after I init the call.
Does this happen to any one or is it just me?
I have an ordinary case for my Touch Pro. Almost 10 out of 10 times when the phone rings and I reach out to my phone, try to take it out - boom - the call becomes a missed call. I guess what is happening here is that once the phone rings, the screen is active and either your finger accidentally touches the volume key or any other key or even the screen, it makes it a missed call. It is very annoying and how to avoid this????
Thanks
kmahesh said:
Does this happen to any one or is it just me?
I have an ordinary case for my Touch Pro. Almost 10 out of 10 times when the phone rings and I reach out to my phone, try to take it out - boom - the call becomes a missed call. I guess what is happening here is that once the phone rings, the screen is active and either your finger accidentally touches the volume key or any other key or even the screen, it makes it a missed call. It is very annoying and how to avoid this????
Thanks
Click to expand...
Click to collapse
there is a key disabler cab look for it
There are many options how to disable the touchscreen.
There was a topic not long ago about this.
Answerkey Disabler
PocketShield (I currently use this one)
TouchProLock
Sensorlock
Throttlelock
S2U2 (not recommended for TP, drains the battery for unknown reason)
All these deal with locking the TP.
Sorry for not posting links but I don't have much time. All of them are available on XDA though.
You do have the option of extending the time it takes for a call to go to voice mail, it can be extended up to 30 seconds. The option is under settings > phone > Services > Call Forwarding
There is also a lot of lag on between the time the caller's phone is ringing and you get a ring on the Fuze
I guess this is not because of the keys. Just keep the phone in front of you and try to call your phone and see your self, first you will see the incoming call indicator light, and after some time you will start hearing the ring tone. Now by the time you take the phone from the case - it's a miss call. I tried to search all over XDA but didn't find a way to start ringing immediately when call comes, I read some where that this is due to the dialer skin and by using default WM dialer this can be fixed. I didn't try this.
kmahesh said:
Does this happen to any one or is it just me?
I guess what is happening here is that once the phone rings, the screen is active and either your finger accidentally touches the volume key or any other key or even the screen, it makes it a missed call.
Click to expand...
Click to collapse
I think he was talking about the touchscreen being active on incoming calls.
If however the problem is in the delay, then the dialer skin is the key.
You have to change it to the WM default (it does work, the lag is almost gone) and have the ringtone in WAV format (not tested, I didn't bother to put any wavs).
if you get rid of the dialer and switch to WM
you will lose functionality including the symbol to show bluetooth being on or off
I downloaded and installed disableanswerkeys and it works fine. It took a while for me to understand the cryptic question it asks in the beginning - i get stumped if there are two negatives in a sentence So It is on and i tried and it works ok. I also downloaded sensorlock and throttlelock. Yet to try these ... will post my comments.
the lag in answering the call - i believe there is a separate thread about that, right?
Thanks for the help
lbhocky19 said:
if you get rid of the dialer and switch to WM
you will lose functionality including the symbol to show bluetooth being on or off
Click to expand...
Click to collapse
LOL, that's what happened to my bluetooth......thanks
This is my problem
say A calls me and I couldn't pick up so the phone rings then directs A to my voice mail
so then A calls me again
this time the led would flash, the screen would show that A is calling, but the ringer would not ring.
The ringer on my phone is always on the highest ringer and I tested it out and I am still getting the same results.
Does anyone else has the same issue??
That is what exactly happen to me, i don't have a voice box (since roger is expensive)
But i notice if i do miss the first call (being forward or not) the second call will never rings.
As long the second call is the same person as first call.
I think it is a call blocking system so you don't get rings everytime the same person multi-call you within a time frame
ii thanks I thought that I was the only one or something
yeh rogers is bloody expensive, also you any suggestions to fix this
and thanks
I suggest you make a super ringtone with max sound. So you don't miss the first call. Or
simply write a android program that calls you back on missing calls.
wrongfeifong said:
I suggest you make a super ringtone with max sound. So you don't miss the first call. Or
simply write a android program that calls you back on missing calls.
Click to expand...
Click to collapse
I got a loud ringtone
how do you do the android program
Every time I make a call the dialer automatically switches into conference calling mode and wants me to input another number or contact. I can't get out of this screen to end the call or end the call from the notification pane. Killing the dialer app causes it to retry the call when it restarts. The only way to stop this loop is to restart the device. Resetting the phone hasn't fixed the problem.
Note: Even though I typed this in the first person it's actually my friend's device. I'm just too tired to remember to keep to 3rd person and wanted coherence.
Note 2: I have witnessed the fault but I was not present for the reset so I'm not 100% certain that it was done properly.
Hi,
I've just got a watch 2 sport and when I've dialed someone off the watch and they are engaged I cannot see how to end call as icons disappear, I then have to get phone out my pocket , same when I'm on a call and want to end it off watch without getting phone out, unlocking it, then ending call, how do you?
Thanks.
Would like to solve the same problem.
u can set in option to ends call by pressing power button
I've tried wear dialer and that does what I want, ie there is an answer and a end call icon on the watch itself, it's not perfect because once in a call you can't see anything on the watch bar the dialer, if you want to see the time by pressing the home button it ends the call.
not sure if i understand good (my english is not very well )
if u have a call and wanna see for example time, just swipe dialer like u would close any app, call will remain and you will be able to see what u want and at the end of call press power button
DM* said:
not sure if i understand good (my english is not very well )
if u have a call and wanna see for example time, just swipe dialer like u would close any app, call will remain and you will be able to see what u want and at the end of call press power button
Click to expand...
Click to collapse
Not my situation.
I cant see the call informations on my watch.
Once I pick up the call, call UI on the watch dissapear.
Kind silly if you are driving car and speaking to your bluetooth and you are not able to end call without picking phone out of your pocket.
MiBan82 said:
Not my situation.
I cant see the call informations on my watch.
Once I pick up the call, call UI on the watch dissapear.
Kind silly if you are driving car and speaking to your bluetooth and you are not able to end call without picking phone out of your pocket.
Click to expand...
Click to collapse
That's what I can't understand, I call a number from my watch through my Bluetooth, the call ui disappears, the number is say engaged, I then have to go back to my phone to end call as the watch won't do it, the only way the watch will do it is by taking the call solely through the watch itself, the call ui then stays.
Not the best but I've stuck with wear dialer even though once on a call the watch only shows the call ui, if you want to know the time while on the call, you can't.