Sorry for duplicate post, but my box is M3, not MX
I have a M3 box and installed wrong firmware and now I don't have access CWM (no signal), black screen and blue led. I tried several times recovery by SD card and a lot of softwares/firmwares (SDcardMaker.exe, HDDRawCopy1.02Portable.exe)...
There are any way to recovery by JTAG? or AML ImageBurnTool?
This is my box: http://www.aliexpress.com/item/2013...oogle-TV-Box-IPTV-reciever-hd/1046658225.html
And this is the picture (but dvbs2). There are some kind of boxes (dvb-t, dvbs2...), the difference is only the tuner (removable): http://www.gadgetoadicto.com/wp-content/Imagenes/placa-iptv28.jpg
I need help!!!!!!!
Frank
==============
Related
Hello Ive got a bit of a problem actualy a few with my pipo U1 Pro
I installed CWM V6.o.3.1 and rebooted fine, pipo boot image was normal, then i installed from ext SD card Decontaminat V3.1
after install the screen was Split at 2/3 and touch orintation was off with buttons in wrong corners
so i read alot found change in build.prop (ro.sf.hwrotation=270) from 270 to 0 and reinstalled form ext sd card
all it fixed was position of touch screen the image of ui was still split 2/3 and out of rotation.
i reinstalled CWM fron ext sd card reboot ant the cwm recovery is straigt on the vertical and the android shows in center of screen, but ther is a fine line showing where the screen was split in the os.
after reboot the os is still split 2/3 image i have to us the show touch function to navigat the touch field to make thins work
i had TNT pipo u1 pro.img installed before and was rooted worked fine but latly had a few minor problems with it so i desided to chand up a bit.
second problem is i cant get ADB , android studio or rkbatch tools to find my tablet, usb debugging is on, tried the load from adb sideload function in cwm
im running linux mint 17 added udev.rules rebooted every thing many time s swapped usb plugs cords you name it.
as it is the tablet works but the ui is buggered up and touch is off
any help would be verry appricated
mike
Hi there,
I'm sorry but I can't find anything related to your question/device:
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hi guys. I have a problem, install a bad firmware on my android tv box c03ref atv -108 . my tv box remain as seen in the first image , try to enter the recovery menu did not work.
I read a lot about it . the only solution is to put the firmware on a bootable sd tv and open the box and cause a short in a pin of nand but nothing about this.
in the second and third photo I show my tv box inside to guide me .
Could anyone help ?
Sorry for my bad english
the step pictures private.
xda not let me publish them.
TECLAST X98 PLUS II (C2D6) DUAL OS NOT BOOTING.
FINALLY I FOUND THAT WINDOWS WAS ERASED IN MY TABLET, AND THE WINDOWS ICON AND PARTITION WAS NOT FIND IN BOOT MODE AS WELL AS TWRP BUT, AT THE TIME OF BOOTING THE TAB MIDDLE OF THE SCREEN SHOWS " AFU: Test IFNI \IFNI.bin FileSize is 0x00400000" IN TWO LINES. THEREAFTER IT DIRECTLY GOES TO ANDROID. NOW THE ANDROID IS DELETING ALL FILES FROM THE EXTERNAL SD CARD AND ONLY EMPTY FOLDER IS SHOWING. I THINK IT IS BIOS COMPLAINT, IS IT TRUE, IF TRUE PLEASE PROVIDE BIOS IF YOU HAVE, IF THERE IS ANY SOLUTION PLEASE PROVIDE TO ME?
THE TAB IS WORKING IN ANDROID MODE AFTER INSTALLING FIRMWARE SUPPLIED BY THE TECLAST, BUT THERE IS NO WINDOWS ICON TO INSTALL NEW WINDOWS. I HAVE ALREADY TRIED FROM BOOT MENU, BUT IT DID,NT RECOGNISED MY PEN DRIVE.
THOSE ALL PROBLEMS STARTS WHEN I TRYING TO ROOT MY TABLET WITH "KINGO ROOT" IT SHOWS MY TABLET WAS ROOTED THEN THOSE PROBLEMS STARTED. PLEASE HELP?
Teclast x98 plus (c2d6) dual os booting problem
I FOUND THE BIOS FOR THE TECLAST X98 PLUS II C2D6 FROM http://chinagadgetsreviews.com BUT, AS PER THE GUIDELINES THE UPDATE MUST BE FROM THE WINDOWS MODE, IS THERE ANY WAY TO UPDATE THE BIOS IN ANDROID OR TWRP MODE OR ANY OTHER MODE
apparaoadari said:
TECLAST X98 PLUS II (C2D6) DUAL OS NOT BOOTING.
FINALLY I FOUND THAT WINDOWS WAS ERASED IN MY TABLET, AND THE WINDOWS ICON AND PARTITION WAS NOT FIND IN BOOT MODE AS WELL AS TWRP BUT, AT THE TIME OF BOOTING THE TAB MIDDLE OF THE SCREEN SHOWS " AFU: Test IFNI \IFNI.bin FileSize is 0x00400000" IN TWO LINES. THEREAFTER IT DIRECTLY GOES TO ANDROID. NOW THE ANDROID IS DELETING ALL FILES FROM THE EXTERNAL SD CARD AND ONLY EMPTY FOLDER IS SHOWING. I THINK IT IS BIOS COMPLAINT, IS IT TRUE, IF TRUE PLEASE PROVIDE BIOS IF YOU HAVE, IF THERE IS ANY SOLUTION PLEASE PROVIDE TO ME?
THE TAB IS WORKING IN ANDROID MODE AFTER INSTALLING FIRMWARE SUPPLIED BY THE TECLAST, BUT THERE IS NO WINDOWS ICON TO INSTALL NEW WINDOWS. I HAVE ALREADY TRIED FROM BOOT MENU, BUT IT DID,NT RECOGNISED MY PEN DRIVE.
THOSE ALL PROBLEMS STARTS WHEN I TRYING TO ROOT MY TABLET WITH "KINGO ROOT" IT SHOWS MY TABLET WAS ROOTED THEN THOSE PROBLEMS STARTED. PLEASE HELP?
Click to expand...
Click to collapse
Greetings and welcome to assist. This is for another model but the guide should work if you swap files
https://forum.xda-developers.com/x98-air/help/unbrick-bios-softbrick-x98-air-3g-id-t3285191
Good luck
Sawdoctor
Gents,
I have a smart TV stop launching after a mistake happend in setting, i guess change the setup location to SD instead of the internal memeory, i did root successfully using 360 root app, which enable me to remove the unwanted apps, but after using a lot of apps, the tv stop and power into logo screen for while then shutdown itself,
Manf : Cultraview Digital Technology Co
Brand : Mstar
SDK:19
Board: cv6a638_international
Android : 4.4.4
Model : CAIXUN_New
i am looking for your help to
1- how to put 7 buttons TV into the recpvery mode to perfrom factroy rest.
2- i looking for a custom rom for it, many simailar models had android 5..1
appreciate your kind support.
Hi:
I'm completely exhausted with my tanix tx5 pro. I had a problem and now tvbox don't work. When I put power adaptador appear red line. I tried do a restore with usb burning tool but don't work. I tried with burn card maker and sd card and don't work (appear android logo and line of % but don't do anything. To add, blue light in tv box appear).
My wifi module is "FN-LINK 8223A F12019 1652", but I didn't find any firmware to this. I tryed restore with firmware with wifi module QC9377 (I red that It could run with my wifi module). I asked to tanix company about original firmware but I don't have any answer. Can someone help me?
Model: tanix tx5 pro
Amlogic s905x 2g ram 16 nand
android 6.0