Bricked tanix tx5 pro - Android Stick & Console Computers General

Hi:
I'm completely exhausted with my tanix tx5 pro. I had a problem and now tvbox don't work. When I put power adaptador appear red line. I tried do a restore with usb burning tool but don't work. I tried with burn card maker and sd card and don't work (appear android logo and line of % but don't do anything. To add, blue light in tv box appear).
My wifi module is "FN-LINK 8223A F12019 1652", but I didn't find any firmware to this. I tryed restore with firmware with wifi module QC9377 (I red that It could run with my wifi module). I asked to tanix company about original firmware but I don't have any answer. Can someone help me?
Model: tanix tx5 pro
Amlogic s905x 2g ram 16 nand
android 6.0

Related

[Q] BlueBo B3000 Android 4.0.4 kernel and fleshing problem

Hello,
I have problem with using RAM Expander, it shows me error message that my kernel does not support using swapp file..
So I contacted Developer and he told me that I should switch to cyanogenmod, well I have B3000 (chinese phone), and for this device there is no support.. If I install this mod I will loose my application for Analog TV tuner (and I can not find that one anywhere to download), and I have double SIM, So I also think that I will be able to use just one SIM card after I flesh my phone, (if I install ROM for some other device , if that is possible)..
Anyway, if anyone have any suggestion I will be very grateful!
Regards,
Emrah.

[Q] Help unbrick AMLogic aml8726-m3 HD16 s2 (google tv box)

Sorry for duplicate post, but my box is M3, not MX
I have a M3 box and installed wrong firmware and now I don't have access CWM (no signal), black screen and blue led. I tried several times recovery by SD card and a lot of softwares/firmwares (SDcardMaker.exe, HDDRawCopy1.02Portable.exe)...
There are any way to recovery by JTAG? or AML ImageBurnTool?
This is my box: http://www.aliexpress.com/item/2013...oogle-TV-Box-IPTV-reciever-hd/1046658225.html
And this is the picture (but dvbs2). There are some kind of boxes (dvb-t, dvbs2...), the difference is only the tuner (removable): http://www.gadgetoadicto.com/wp-content/Imagenes/placa-iptv28.jpg
I need help!!!!!!!
Frank
==============

Help Me Plz For My China Tablet 9.7 inch I think it is bricked

Hello Member,
As i know i am very new to this forum.....
But I am a regular reader of this forum.
I need help about my China Tablet which is 9.7 inch dont know of which brand and on tabet there is no name of tablet mentioned on device/Box.
Few month ago the device was running on android 4.0.4... i think it was raw android... 1 month ago i read a article on XDA For cynogen 9 for china/All winner Tablet... So i downloaded and installed through sd card... but when my tablet restarted it shows a message...
" Encryption Unsuccessful " and it is showing a reset tablet button in bottom when i touched on it nothing happen..... Dont know why the touch is not working, So i attached a keyboard but nothing happen when i clicked on the button....
So after i tried many times to install different-different custom Rom by sd card. But each and every time it says.. " E: Signature Varification Failed"
Here Are The specification Of tablet..
OS- Android 4.0 Was installed But Currently It is Having Cynogen 9 (Not Working)
CPU- ARM Cortex-A8 1GHz
RAM- 1GB
ROM- 16GB
LCD- 9.7 INCH
TOUCH PANNEL- CAPACTIVE
2D/3D- AMD Granphic Accleration, Full Support
GRAPHIC- OpenGL ES2.0(AMD Z340) and Open VG1.1(AMD Z160)@27M Tri/sec
WIFI Wireless- Support 802.11b/g/n standarD, highest transmission get to 300Mbps, support local WAPI wireless protocol standard..
I Am Having Some ROM,CWM.. Pics Are Attached....
1- Start Screen-1
2- Start Screen-2
3- Start Screen-3
4- Error Message
5- Error While Installing Rom From Sd Card
6- All Android Developer Software
7- Custom Rom List
8- Cmw
Bro.... one thing more when i want to tell when i connect the device to pc.... it identify and install the drivers via internet... but not read the internal storage..... But in new it was working fine.....
Plz Help Me To Reacces My Tablet...
I will Be Very Thank Full To All Of You.......
THNX

[Completed] Teclast x98 plus ii (c2d6) dual os not booting

TECLAST X98 PLUS II (C2D6) DUAL OS NOT BOOTING.
FINALLY I FOUND THAT WINDOWS WAS ERASED IN MY TABLET, AND THE WINDOWS ICON AND PARTITION WAS NOT FIND IN BOOT MODE AS WELL AS TWRP BUT, AT THE TIME OF BOOTING THE TAB MIDDLE OF THE SCREEN SHOWS " AFU: Test IFNI \IFNI.bin FileSize is 0x00400000" IN TWO LINES. THEREAFTER IT DIRECTLY GOES TO ANDROID. NOW THE ANDROID IS DELETING ALL FILES FROM THE EXTERNAL SD CARD AND ONLY EMPTY FOLDER IS SHOWING. I THINK IT IS BIOS COMPLAINT, IS IT TRUE, IF TRUE PLEASE PROVIDE BIOS IF YOU HAVE, IF THERE IS ANY SOLUTION PLEASE PROVIDE TO ME?
THE TAB IS WORKING IN ANDROID MODE AFTER INSTALLING FIRMWARE SUPPLIED BY THE TECLAST, BUT THERE IS NO WINDOWS ICON TO INSTALL NEW WINDOWS. I HAVE ALREADY TRIED FROM BOOT MENU, BUT IT DID,NT RECOGNISED MY PEN DRIVE.
THOSE ALL PROBLEMS STARTS WHEN I TRYING TO ROOT MY TABLET WITH "KINGO ROOT" IT SHOWS MY TABLET WAS ROOTED THEN THOSE PROBLEMS STARTED. PLEASE HELP?
Teclast x98 plus (c2d6) dual os booting problem
I FOUND THE BIOS FOR THE TECLAST X98 PLUS II C2D6 FROM http://chinagadgetsreviews.com BUT, AS PER THE GUIDELINES THE UPDATE MUST BE FROM THE WINDOWS MODE, IS THERE ANY WAY TO UPDATE THE BIOS IN ANDROID OR TWRP MODE OR ANY OTHER MODE
apparaoadari said:
TECLAST X98 PLUS II (C2D6) DUAL OS NOT BOOTING.
FINALLY I FOUND THAT WINDOWS WAS ERASED IN MY TABLET, AND THE WINDOWS ICON AND PARTITION WAS NOT FIND IN BOOT MODE AS WELL AS TWRP BUT, AT THE TIME OF BOOTING THE TAB MIDDLE OF THE SCREEN SHOWS " AFU: Test IFNI \IFNI.bin FileSize is 0x00400000" IN TWO LINES. THEREAFTER IT DIRECTLY GOES TO ANDROID. NOW THE ANDROID IS DELETING ALL FILES FROM THE EXTERNAL SD CARD AND ONLY EMPTY FOLDER IS SHOWING. I THINK IT IS BIOS COMPLAINT, IS IT TRUE, IF TRUE PLEASE PROVIDE BIOS IF YOU HAVE, IF THERE IS ANY SOLUTION PLEASE PROVIDE TO ME?
THE TAB IS WORKING IN ANDROID MODE AFTER INSTALLING FIRMWARE SUPPLIED BY THE TECLAST, BUT THERE IS NO WINDOWS ICON TO INSTALL NEW WINDOWS. I HAVE ALREADY TRIED FROM BOOT MENU, BUT IT DID,NT RECOGNISED MY PEN DRIVE.
THOSE ALL PROBLEMS STARTS WHEN I TRYING TO ROOT MY TABLET WITH "KINGO ROOT" IT SHOWS MY TABLET WAS ROOTED THEN THOSE PROBLEMS STARTED. PLEASE HELP?
Click to expand...
Click to collapse
Greetings and welcome to assist. This is for another model but the guide should work if you swap files
https://forum.xda-developers.com/x98-air/help/unbrick-bios-softbrick-x98-air-3g-id-t3285191
Good luck
Sawdoctor

Need Help: ROOTED MSTAR SMART TV STUCK AT BOOT SCREEN.

Gents,
I have a smart TV stop launching after a mistake happend in setting, i guess change the setup location to SD instead of the internal memeory, i did root successfully using 360 root app, which enable me to remove the unwanted apps, but after using a lot of apps, the tv stop and power into logo screen for while then shutdown itself,
Manf : Cultraview Digital Technology Co
Brand : Mstar
SDK:19
Board: cv6a638_international
Android : 4.4.4
Model : CAIXUN_New
i am looking for your help to
1- how to put 7 buttons TV into the recpvery mode to perfrom factroy rest.
2- i looking for a custom rom for it, many simailar models had android 5..1
appreciate your kind support.

Categories

Resources