My P6800 kitkat 4.4.2 problem! can not boot. - Galaxy Tab 7.7 Q&A, Help & Troubleshooting

I flashed omni-4.4.2-20140124-p6800-HOMEMADE.zip last night, but it can't work , when I boot system . it stay on OMNI logo screen. And I can not enter twrp 2.6.3.1 too. Is it brick? but I can enter odin mode . any one can help???? thanks

I wanna ask daniel_hk but I just a junior and I can't post at " Android Development" . help!!!!!!

Either flash full official firmware package with Odin or try re-flash recovery and (if successful) wipe, and then restore your Nandroid.

linvas said:
I flashed omni-4.4.2-20140124-p6800-HOMEMADE.zip last night, but it can't work , when I boot system . it stay on OMNI logo screen. And I can not enter twrp 2.6.3.1 too. Is it brick? but I can enter odin mode . any one can help???? thanks
Click to expand...
Click to collapse
Full wipe by CWM before upgrade to 4.4.

1) Reboot to cwm recovery
2) Do full wipe data, cache and davik cache
3) Reboot to cwm recovery again
4) Install KK442
5) Install Gapps
6) Install supersu (optional)
7) Reboot to system

69444091 said:
Full wipe by CWM before upgrade to 4.4.
Click to expand...
Click to collapse
HAPPYFATHER said:
1) Reboot to cwm recovery
2) Do full wipe data, cache and davik cache
3) Reboot to cwm recovery again
4) Install KK442
5) Install Gapps
6) Install supersu (optional)
7) Reboot to system
Click to expand...
Click to collapse
OP says cannot boot into recovery.......
That's why I suggested to flash firmware package or recovery with Odin.
Without a working recovery, it's the only option. From there, he can move on.
Sent from my GT-I9500 using XDA Premium 4 mobile app

Related

EOS update stuck on the first screen

I received notification of an update because it was not updated so that download the zip of the rom go into recovery do the usual steps to flash the rom reboot and freezes the screen asus eee pad retrying again nothing unloading the file from the PC I insert in the sd and tried again but crashes at the same point I tried it with other rom and do the same which may be the problem?
Flash the latest stable KatKiss in recovery, this is the replacement for EOS4 which has been discontinued
Make sure you have TWRP recovery installed, if you don't, use Easyflasher to install it first
Wipe Cache and Dalvik Cache and System, then flash the ROM
http://downloads.timduru.org/android/tf101/K.A.T/KatKiss/stable/KatKiss-4.2.2_224.zip
Then flash Gapps
http://goo.im/devs/teameos/roms/eos4/gapps/gapps_4.2.2_TF101_20130323b.zip
Then wipe Cache and Dalvik Cache again
Then Reboot
Also, the last EOS version (121) had some boot and microSD issues. Stick with EOS 120 or move to KatKiss.
I do not have TWRP recovery installed
I can install it now?
I have to flash the zip?
pilletta said:
I do not have TWRP recovery installed
I can install it now?
I have to flash the zip?
Click to expand...
Click to collapse
Which recovery do you have installed?
May be you can flash this ROM: http://forum.xda-developers.com/showthread.php?t=1245892 first, before you are be able to install TWRP. Because now you can not install any recovery!!
For all Jellybean ROMs is TWRP needed!!!
I installed TWRP and installed Parandroid rom to try it but now I can not get into recovery because to most?
Can you get to recivery holding VOL DOWN and POWER until you see the small white text then tap VOL UP immediately?
How about if you open a terminal emulator and type:
su
(Grant root if prompted)
reboot recovery

i9003 keep rebooting in the samsung logo

Hi, my device is suddenly having a infinite loop at the samsung boot logo. How can i fix it?
Or it is official dead?
ttttkk said:
Hi, my device is suddenly having a infinite loop at the samsung boot logo. How can i fix it?
Or it is official dead?
Click to expand...
Click to collapse
do a clean flash..
procedure
1) flash ddlf2
2) root it
3) go to recovery and directly install
any rom you like.
4) wipe data/reset. (optional)
5) wipe cache and dalvik.
hope this helps you.
maxs8007 said:
do a clean flash..
procedure
1) flash ddlf2
2) root it
3) go to recovery and directly install
any rom you like.
4) wipe data/reset. (optional)
5) wipe cache and dalvik.
hope this helps you.
Click to expand...
Click to collapse
thank you for the reply. My i9003 reboot itself even in the recovery mode. I don't have enough time to flash it before the reboot....

[Q] Problem With Flashing SCH-I535

The very first ROM I tried to flash was a version of CarbonRom. I was unsuccessful, as i got the installation aborted message. I then tried a couple of other lesser know ones, with the same luck. Lastly I tried CM 10.1, and with that, i had success. It was the only one that would work so far. Yesterday, I downloaded DU 4.2.2, and A new nightly version of Carbon (Specifically for my phone) With no luck of installation. Am i doing something wrong with these? Is there a different method of flashing i'm missing?
what is the procedure you take to install?
I usually go this route:
1) Boot into whatever recovery you have
2) Wipe Cache/Davlik
3) Install custom ROM
4) run a factory reset
5) Reboot
snibe said:
what is the procedure you take to install?
I usually go this route:
1) Boot into whatever recovery you have
2) Wipe Cache/Davlik
3) Install custom ROM
4) run a factory reset
5) Reboot
Click to expand...
Click to collapse
I have Philz custom recovery which based on cwm version 6.0.3.7 which when you tap wipe data you will then have the option to clean install for new ROM.
jmxc23 said:
I have Philz custom recovery which based on cwm version 6.0.3.7 which when you tap wipe data you will then have the option to clean install for new ROM.
Click to expand...
Click to collapse
Sorry for not replying earlier, i never got a notification. I'm using the most recent version of CWM. My usual order is :
1. Boot into recovery
2. Factory Reset
3. Clear Cache Partition
4. Wipe Dalvik
5. Format /system
6. Mount /system
7. Flash new ROM
Bcaraway14 said:
Sorry for not replying earlier, i never got a notification. I'm using the most recent version of CWM. My usual order is :
1. Boot into recovery
2. Factory Reset
3. Clear Cache Partition
4. Wipe Dalvik
5. Format /system
6. Mount /system
7. Flash new ROM
Click to expand...
Click to collapse
well we now have 3 custom recoveries to choose from I like the newer one since I can install a new ROM in fewer steps.
i would do a factory reset after you flash your rom too, can't hurt.
of course on updating the same ROM, I only Wipe Cache/Davlik and that's it.
Bad download? Does the md5 match?
after making sure you wiped everything make sure the download itself was proper I am running it flawless right now

Help Stuck on Samsung Screen

I just flashed cm10.1.3 and gapps for my p3113. I used twrp 2.6.3 and when I rebooted the system twrp said to slide and install supersu. I did slide and now when I boot the device up I get stuck on the Samsung screen. I also tried to flash the stock rom with Odin but when I reboot, I and it still is stuck on the Samsung logo
PLEASE HELP ME
nathan17 said:
I just flashed cm10.1.3 and gapps for my p3113. I used twrp 2.6.3 and when I rebooted the system twrp said to slide and install supersu. I did slide and now when I boot the device up I get stuck on the Samsung screen. I also tried to flash the stock rom with Odin but when I reboot, I and it still is stuck on the Samsung logo
PLEASE HELP ME
Click to expand...
Click to collapse
brother again flash stock rom via odin
and it happens that when you flash stock rom that you are stuck on sasumg logo
at this point just boot into stock recovery and just wipe cache partition and factory reset { do not wipe anything more that these two things }
you will definitely able to boot after doing what i have said
I am sure you forgot the Factory Reset!
1. Boot TWRP
2. Make a Wipe Data Factory Reset
3. Advanced Wipe -> Data, Dalvic Cache, Cache Partition
4. Flash Rom
5. Flash Gapps
6. Reboot
I cannot enter recovery mode after I flashed the Stock Rom. I forgot to wipe Data Factory Reset Advanced Wipe -> Data, Dalvic Cache, Cache Partition before I flashed the rom so am I screwed?
.now you are on stock? can you enter download mode?
I can get it into download mode
Try flashing a Custom-Recovery in Download-Mode.
Download here: http://forum.xda-developers.com/showthread.php?t=2548257
Uncheck "Auto-Reboot" in Odin.
When Odin finished flashing: Directly boot into recovery from Downloadmode!
same problem
Hi there,
I have the same problem. Tried flashing via Odin and Auto-Reboot ticked off, but still doesnt work.
The flash counter increases, but no boot into recovery :crying:
Try going into recovery and do a wipe data/factory reset then flash the rom.

NOTE 2 N7100 ODIN Failed

help me guys i have note 2 n7100 (4.4.2) i install cm 12 with cwm and they are installed after installation and clicking reboot system my phone still on phone name screen and did not boot i try to install offecial rom with odin but it failed and i try 4 part rom (4.3 - 4.1) but they block block on get pit for maping.
pleas help me.
khaieri said:
help me guys i have note 2 n7100 (4.4.2) i install cm 12 with cwm and they are installed after installation and clicking reboot system my phone still on phone name screen and did not boot i try to install offecial rom with odin but it failed and i try 4 part rom (4.3 - 4.1) but they block block on get pit for maping.
pleas help me.
Click to expand...
Click to collapse
Download your 4.4.2 firmware here
Make sure you have a good cable and the latest odin.
Do not panic. Is your phone able to boot into recovery? If so then there is hope.. Let me know and I might be able to help you out.
If you're in bootloop after cm12.. Try clearing the 'cache' and 'Dalvik cache' from recovery and try rebooting. .
dev_0905 said:
Do not panic. Is your phone able to boot into recovery? If so then there is hope.. Let me know and I might be able to help you out.
Click to expand...
Click to collapse
Yes my phone able to boot into recovery I have TWRP Recovery I installe DN4 2.1 and they installed but after pressing reboot the same problem happen again
Do a clean reinstall with steps mentioned below..
In recovery.. 1.go to wipe and do factory reset.2.go wipe>advanced>and wipe data, system, cache and Dalvik cache. 3.go to install and flash rom. 4.after success choose wipe cache/Dalvik . Now reboot . this should work.
dev_0905 said:
Do a clean reinstall with steps mentioned below..
In recovery.. 1.go to wipe and do factory reset.2.go wipe>advanced>and wipe data, system, cache and Dalvik cache. 3.go to install and flash rom. 4.after success choose wipe cache/Dalvik . Now reboot . this should work.
Click to expand...
Click to collapse
I wipe data .cash but nothing happened
In twrp recovery they show me a words with red color like that :
E:/sbin/runatboot. sh process ended with ERROR=1
Can you tell me what mean that.
dev_0905 said:
Do a clean reinstall with steps mentioned below..
In recovery.. 1.go to wipe and do factory reset.2.go wipe>advanced>and wipe data, system, cache and Dalvik cache. 3.go to install and flash rom. 4.after success choose wipe cache/Dalvik . Now reboot . this should work.
Click to expand...
Click to collapse
I wipe data .cash but nothing happened
In twrp recovery they show me a words with red color like that :
E:/sbin/runatboot. sh process ended with ERROR=1
Nothing happened same error
Try downgrading ur twrp to 2.8.6.0 and repeat clean install..
---------- Post added at 12:13 PM ---------- Previous post was at 12:05 PM ----------
Also try eclipse Rom because development for dn4 has stopped.. Its a all in single rom file.. Flashing it should be easy

Categories

Resources