Help Stuck on Samsung Screen - Galaxy Tab 2 Q&A, Help & Troubleshooting

I just flashed cm10.1.3 and gapps for my p3113. I used twrp 2.6.3 and when I rebooted the system twrp said to slide and install supersu. I did slide and now when I boot the device up I get stuck on the Samsung screen. I also tried to flash the stock rom with Odin but when I reboot, I and it still is stuck on the Samsung logo
PLEASE HELP ME

nathan17 said:
I just flashed cm10.1.3 and gapps for my p3113. I used twrp 2.6.3 and when I rebooted the system twrp said to slide and install supersu. I did slide and now when I boot the device up I get stuck on the Samsung screen. I also tried to flash the stock rom with Odin but when I reboot, I and it still is stuck on the Samsung logo
PLEASE HELP ME
Click to expand...
Click to collapse
brother again flash stock rom via odin
and it happens that when you flash stock rom that you are stuck on sasumg logo
at this point just boot into stock recovery and just wipe cache partition and factory reset { do not wipe anything more that these two things }
you will definitely able to boot after doing what i have said

I am sure you forgot the Factory Reset!
1. Boot TWRP
2. Make a Wipe Data Factory Reset
3. Advanced Wipe -> Data, Dalvic Cache, Cache Partition
4. Flash Rom
5. Flash Gapps
6. Reboot

I cannot enter recovery mode after I flashed the Stock Rom. I forgot to wipe Data Factory Reset Advanced Wipe -> Data, Dalvic Cache, Cache Partition before I flashed the rom so am I screwed?

.now you are on stock? can you enter download mode?

I can get it into download mode

Try flashing a Custom-Recovery in Download-Mode.
Download here: http://forum.xda-developers.com/showthread.php?t=2548257
Uncheck "Auto-Reboot" in Odin.
When Odin finished flashing: Directly boot into recovery from Downloadmode!

same problem
Hi there,
I have the same problem. Tried flashing via Odin and Auto-Reboot ticked off, but still doesnt work.
The flash counter increases, but no boot into recovery :crying:

Try going into recovery and do a wipe data/factory reset then flash the rom.

Related

[Help] Xoom MZ601 stuck at bootanimation

Hey everyone, I need help for my Xoom 3G MZ601, I just rooted it and flashed EOS' rom and I'm stuck at bootanimation. I'm new to rooting and flashing custom roms for tablets, its different in phones.
When you say you are stuck, what have you tried to do? Have you tried to get back into your custom recovery? If you can, you could try to reflash your rom and gapps after wiping cache and dalvik cache. You would have your system wiped when you unlocked, but you could wipe again before reflashing...that might help.
Yes, I wiped everything, I did this 5 times and the same thing happens, stuck in bootanim.
okantomi said:
When you say you are stuck, what have you tried to do? Have you tried to get back into your custom recovery? If you can, you could try to reflash your rom and gapps after wiping cache and dalvik cache. You would have your system wiped when you unlocked, but you could wipe again before reflashing...that might help.
Click to expand...
Click to collapse
1. Do you have a backup of your stock rom? if you have a backup and recovery works you should be able to recover your stock system and everything will be allright.
2. If you don't have a backup enter this site motodev site (i can't post any links) download correct firmware for your device and flash every part of downloaded rom via fastboot.
I hope it will help you
It seems like your recovery img is the culprit, try downloading eos with goomanager..
try; adb reboot bootloader
fastboot flash recovery eos-recovery-r6.img http://goo.im/devs/teameos/recoveries/wingray/eos-recovery-r6-softkeys.img or http://goo.im/devs/teameos/recoveries/wingray/eos-recovery-r6.img
adb reboot recovery

[Q] Bootloader instead of PDA

I was trying to flash clockworkmod touch on my Samsung galaxy note 10.1 (GT-N8013) I accidentally put it in the bootloader section on Odin as opposed to PDA. now the tablet is stuck on the same image as the download mode, although I can access the actual download mode and the recovery. I have tried formatting system, data, cache and dalvik cache. What can I do to fix it?
Edit: I got it working after downloading the stock rom and flashing it first in the bootloader, which put it in a bootloop but got the stock bootloader loaded, then performing a full wipe and flashing it under pda fixed the bootloop.

[Q] PLZ HELP!! very bad soft bricked GT-P5100 :'(

2 days ago i was just going around my advanced junk with clean master app. there was a filed named empty folders which was 11 mb in advanced junk section, so i cleared the file and went to play angry birds, then suddenly it stuck and rebooted. :'( now every time it boots up, shows the boot image, starts the cyanogenmod boot animation and then the boot animation stucks and then the whole process again...REBOOT LOOP
i tried every thing till now:
1. tried to install stock rom through odin but still shows cyanogenmod animation and reboot loops
2.tried to install different recovery but the recovery doesn't change also.
3. tried to install a different rom for eg: PAC rom. it installs but it still shows cyanogenmod
4. also now i tried to install stock firmware with pit file but it still shows cyanogenmod animation.
AND MY WARRANTY WAS EXPIRED MONTHS AGO
i think there is a problem with the partition or something... i dont know how to fix it
SOMEONE PLZ HELP ME!
Have you tried downloading the stock Samsung Firmware and flash it thru Odin don't use pit file unless you're partiitions Are messed up
Sent from my HUAWEI Y300-0100 using xda app-developers app
tried everything
jack54782 said:
Have you tried downloading the stock Samsung Firmware and flash it thru Odin don't use pit file unless you're partiitions Are messed up
Sent from my HUAWEI Y300-0100 using xda app-developers app
Click to expand...
Click to collapse
I have tried everything:
1. flashing the stock firmware with odin but still cyanogenmod animation loads and restart loops
2. flashing the stockfirmware with PIT file but still reboot loop with cyanogenmod animation.
fahad5596 said:
I have tried everything:
1. flashing the stock firmware with odin but still cyanogenmod animation loads and restart loops
2. flashing the stockfirmware with PIT file but still reboot loop with cyanogenmod animation.
Click to expand...
Click to collapse
If you are able to boot to recovery, can't you wipe completely? (System, cache, data) Once CM is gone you should be able to install other Rom. I'm a little confused how CM could continue to boot if it has been wiped from phone...
Sent from my GT-p511x
wiped many times
sharonbw said:
If you are able to boot to recovery, can't you wipe completely? (System, cache, data) Once CM is gone you should be able to install other Rom. I'm a little confused how CM could continue to boot if it has been wiped from phone...
Sent from my GT-p511x
Click to expand...
Click to collapse
i wiped everything except sdcard in mount section even the dalvic cache but still cm boot animation appears :/
i think i cleared a system file which was related to the partition of the system in the advanced junk section of clean master app...
I HATE CLEAN MASTER
You can flash a Custom-Recovery using Odin.
You´ll find a link latest recoverys in my signature.
If Stock Recovery still boots you need to uncheck "Auto-Reboot" in Odin. When Odin finished flashing, wait 1 minute to be sure. Then directly boot into recovery from download-mode and enjoy the custom recovery.
This will increase your flashcounter!
Put your Rom & Gapps on your MicroSD Card
In CWM / CWM based recoverys:
Wipe Cache
Wipe Dalvic Cache
Wipe Data Factory Reset
format /system
fromat /data and /data/media (this will format your internal sd! be sure your rom placed on microSD card)
flash the rom
reboot (first boot can take ~30 minutes - if it still bootloops: something´s worng )
if everything working:
reboot recovery
flash gapps
reboot
Strange that reflashing the system didn't help. You could try it with an other recovery?

[Q] ODIN Pass but Nothing has changed

Hi Guys, Need some help please!
My P3100 had CM11 on it, and one day it stopped booting, was stuck in the Samsung logo. I got into recovery, did a factory reset\cache and dalvik wipe, but has not helped. I got into the Download mode and tried flashing the stock firmware. Odin takes 92 minutes to complete this process, and I can see "PASS" displayed, but tab still stuck in Samsung logo. Infact, when I reboot to recovery after flashing Stock rom, it still takes me the CWM recovery, while I expected to get into Stock recovery. I have also tried flashing TWRP recovery, I get a Pass message, but takes me to CWM recovery again. I have tried flashing custom ROMs from this recovery, dont get any error, but tab still wont go past the Samsung Logo. Out of ideas now, please help!
Boot into Recovery
- wipe data factory reset
- wipe cache
- wipe dalvic cache
- format system
- flash new ROM (if you flash stock ROM CWM/TWRP recovery will be overwritten during first boot)
I have tried that. Several times. The CWM recovery seems to be permanently stuck to the tab. Even if I flash twrp recovery, the flash is successful, but I go back to CWM recovery.

Hard Bricked Duos 2

Hello.
Got a Duos 2 to try to revive but no luck so far.
Status:
Power on and stuck at Samsung logo
First time i managed to enter in recovery and did a wipe (data,cache) in the process got a data partition corruption error in red.
Download mode is working, tried to apply a stock firmware via Odin, no errors but still stuck on logo.
After that i can't enter in recovery mode anymore, tried a few custom recoverys applied via odin, but again no recovery mode.
Any ideas?
I only got download mode and no recovery.
affter odin. go to stock recovery wipe facrory reset
Flash the repair frimware to ur device using odin. This will definitely fix the problem.
Download link- https://www.androidfilehost.com/?fid=24499762636002990
Note- repair frimware always comes in Arabic language but you can change the language at the setup screen.
1-install twrp and do clean flash with formating internal storage
2-flash stock you of your region with odin and remember after flashing complete and odin says pass than remove the cable do not remove when it says reset.....
3-if phone stuck's on boot screen than boot your phone into stock rom recovery and wipe cache and delvic
4-reboot it
.done!!!!!!
.
.

Categories

Resources