Database Info

Problem after I tried to install CM10 A4

Hello !
I have this phone since yesterday and I have a problem.
I want to install X-Gamerz v2.6 Rom. I have done the KPE clean part, but after I flash CF Root LF2, I don't know what to do. I have reboot the phone in recovery with volume up+home+power button, I wipe data and I selected the .zip (CM10 A4) from SDCARD to flash. It starting to flash and after 3 seconds , it start to reboot. After another 3-4 seconds it says something which look like trying to flash something in recovery, but it stop very fast and it reboots again. After 3-4 seconds it says same thing, and reboots again and again . I tried to take out the sdcard, but after reboot , the recovery says something like "Waiting to mount the SDcard (20sec)" . After 20 sec it reboots again and says same thing.
I tried to follow the steps again, but I`ve got same thing. I tried to use the phone after I flashing CF Root LF2 and it work. But if I trying to flash again CM10 A4 zip or X-Gamerz zip, it enter in bootloop again.
What I doing wrong?

RazvanFCBM said:
Hello !
I have this phone since yesterday and I have a problem.
I want to install X-Gamerz v2.6 Rom. I have done the KPE clean part, but after I flash CF Root LF2, I don't know what to do. I have reboot the phone in recovery with volume up+home+power button, I wipe data and I selected the .zip (CM10 A4) from SDCARD to flash. It starting to flash and after 3 seconds , it start to reboot. After another 3-4 seconds it says something which look like trying to flash something in recovery, but it stop very fast and it reboots again. After 3-4 seconds it says same thing, and reboots again and again . I tried to take out the sdcard, but after reboot , the recovery says something like "Waiting to mount the SDcard (20sec)" . After 20 sec it reboots again and says same thing.
I tried to follow the steps again, but I`ve got same thing. I tried to use the phone after I flashing CF Root LF2 and it work. But if I trying to flash again CM10 A4 zip or X-Gamerz zip, it enter in bootloop again.
What I doing wrong?
Click to expand...
Click to collapse
KPE> LF2> CF-LF2> CM10 A4
- remove the battery (bootlop recovery) this is normal boot loop so need not worry... now start working after this step
- Wipe data factory reset
- Mounts and Storage > Format /System
-Flash x-gamerz...

Thank you. It worked

RazvanFCBM said:
Thank you. It worked
Click to expand...
Click to collapse
np

mustafahussain said:
KPE> LF2> CF-LF2> CM10 A4
- remove the battery (bootlop recovery) this is normal boot loop so need not worry... now start working after this step
- Wipe data factory reset
- Mounts and Storage > Format /System
-Flash x-gamerz...
Click to expand...
Click to collapse
Want to install x-gamerz. Currently on XXKPQ Stock. Can i get detailed instructions to install. Just a noob. Dont know anything about kpe lf2 etc. Flashed XXKPQ with i think odin some time ago though.
Sent from my GT-I9003 using xda app-developers app

RazvanFCBM said:
Thank you. It worked
Click to expand...
Click to collapse
i have the same problem how u got it worked can u explain?

mustafahussain said:
KPE> LF2> CF-LF2> CM10 A4
- remove the battery (bootlop recovery) this is normal boot loop so need not worry... now start working after this step
- Wipe data factory reset
- Mounts and Storage > Format /System
-Flash x-gamerz...
Click to expand...
Click to collapse
I have I9003 stuck on boot rebooting after i tried to flash the root
now I am not able to make it work tried to flash firmware same result ,when I enter the cwm it is not doing the factory reset or wipe data
would you help?

ahmadtrabulsi said:
I have I9003 stuck on boot rebooting after i tried to flash the root
now I am not able to make it work tried to flash firmware same result ,when I enter the cwm it is not doing the factory reset or wipe data
would you help?
Click to expand...
Click to collapse
thank you solved
if someone need the method just let me know

My P6800 kitkat 4.4.2 problem! can not boot.

I flashed omni-4.4.2-20140124-p6800-HOMEMADE.zip last night, but it can't work , when I boot system . it stay on OMNI logo screen. And I can not enter twrp 2.6.3.1 too. Is it brick? but I can enter odin mode . any one can help???? thanks

I wanna ask daniel_hk but I just a junior and I can't post at " Android Development" . help!!!!!!

Either flash full official firmware package with Odin or try re-flash recovery and (if successful) wipe, and then restore your Nandroid.

linvas said:
I flashed omni-4.4.2-20140124-p6800-HOMEMADE.zip last night, but it can't work , when I boot system . it stay on OMNI logo screen. And I can not enter twrp 2.6.3.1 too. Is it brick? but I can enter odin mode . any one can help???? thanks
Click to expand...
Click to collapse
Full wipe by CWM before upgrade to 4.4.

1) Reboot to cwm recovery
2) Do full wipe data, cache and davik cache
3) Reboot to cwm recovery again
4) Install KK442
5) Install Gapps
6) Install supersu (optional)
7) Reboot to system

69444091 said:
Full wipe by CWM before upgrade to 4.4.
Click to expand...
Click to collapse
HAPPYFATHER said:
1) Reboot to cwm recovery
2) Do full wipe data, cache and davik cache
3) Reboot to cwm recovery again
4) Install KK442
5) Install Gapps
6) Install supersu (optional)
7) Reboot to system
Click to expand...
Click to collapse
OP says cannot boot into recovery.......
That's why I suggested to flash firmware package or recovery with Odin.
Without a working recovery, it's the only option. From there, he can move on.
Sent from my GT-I9500 using XDA Premium 4 mobile app

[Q] Bootloader broken?

Hello guys,
after attempting to install a custom rom in my S5670B I got stuck in CWM every single time I try to reboot the phone. I doesn't matters what I try, it will always boot into recovery.
So, is there anyway to make it boot "correctly"?
Steps to install the custom rom:
1. boot into recovery
2. wipe data/cache
3. wipe dalvik
4. format /system
5. install from zip
6. wipe dalvik

rmartignoni said:
Hello guys,
after attempting to install a custom rom in my S5670B I got stuck in CWM every single time I try to reboot the phone. I doesn't matters what I try, it will always boot into recovery.
So, is there anyway to make it boot "correctly"?
Steps to install the custom rom:
1. boot into recovery
2. wipe data/cache
3. wipe dalvik
4. format /system
5. install from zip
6. wipe dalvik
Click to expand...
Click to collapse
just you need below steps test it reply here again.
1. boot into recovery
2. wipe data/cache
3. wipe dalvik
4. install from zip
5 wipe data/cache
6. wipe dalvik

rmartignoni said:
Hello guys,
after attempting to install a custom rom in my S5670B I got stuck in CWM every single time I try to reboot the phone. I doesn't matters what I try, it will always boot into recovery.
So, is there anyway to make it boot "correctly"?
Steps to install the custom rom:
1. boot into recovery
2. wipe data/cache
3. wipe dalvik
4. format /system
5. install from zip
6. wipe dalvik
Click to expand...
Click to collapse
If you are using CWM6 there is known bug that causes this. Just revert to CWM5.
If not just wipe everything (EXECPT SDCARD) and flash again
If that is no go then flash stock rom via odin, flash CWM5 and then flash custom rom.

NOTE 2 N7100 ODIN Failed

help me guys i have note 2 n7100 (4.4.2) i install cm 12 with cwm and they are installed after installation and clicking reboot system my phone still on phone name screen and did not boot i try to install offecial rom with odin but it failed and i try 4 part rom (4.3 - 4.1) but they block block on get pit for maping.
pleas help me.

khaieri said:
help me guys i have note 2 n7100 (4.4.2) i install cm 12 with cwm and they are installed after installation and clicking reboot system my phone still on phone name screen and did not boot i try to install offecial rom with odin but it failed and i try 4 part rom (4.3 - 4.1) but they block block on get pit for maping.
pleas help me.
Click to expand...
Click to collapse
Download your 4.4.2 firmware here
Make sure you have a good cable and the latest odin.

Do not panic. Is your phone able to boot into recovery? If so then there is hope.. Let me know and I might be able to help you out.
If you're in bootloop after cm12.. Try clearing the 'cache' and 'Dalvik cache' from recovery and try rebooting. .

dev_0905 said:
Do not panic. Is your phone able to boot into recovery? If so then there is hope.. Let me know and I might be able to help you out.
Click to expand...
Click to collapse
Yes my phone able to boot into recovery I have TWRP Recovery I installe DN4 2.1 and they installed but after pressing reboot the same problem happen again

Do a clean reinstall with steps mentioned below..
In recovery.. 1.go to wipe and do factory reset.2.go wipe>advanced>and wipe data, system, cache and Dalvik cache. 3.go to install and flash rom. 4.after success choose wipe cache/Dalvik . Now reboot . this should work.

dev_0905 said:
Do a clean reinstall with steps mentioned below..
In recovery.. 1.go to wipe and do factory reset.2.go wipe>advanced>and wipe data, system, cache and Dalvik cache. 3.go to install and flash rom. 4.after success choose wipe cache/Dalvik . Now reboot . this should work.
Click to expand...
Click to collapse
I wipe data .cash but nothing happened
In twrp recovery they show me a words with red color like that :
E:/sbin/runatboot. sh process ended with ERROR=1
Can you tell me what mean that.

dev_0905 said:
Do a clean reinstall with steps mentioned below..
In recovery.. 1.go to wipe and do factory reset.2.go wipe>advanced>and wipe data, system, cache and Dalvik cache. 3.go to install and flash rom. 4.after success choose wipe cache/Dalvik . Now reboot . this should work.
Click to expand...
Click to collapse
I wipe data .cash but nothing happened
In twrp recovery they show me a words with red color like that :
E:/sbin/runatboot. sh process ended with ERROR=1
Nothing happened same error

Try downgrading ur twrp to 2.8.6.0 and repeat clean install..
---------- Post added at 12:13 PM ---------- Previous post was at 12:05 PM ----------
Also try eclipse Rom because development for dn4 has stopped.. Its a all in single rom file.. Flashing it should be easy

[Completed] format mounts/storage in cwm recovery

im installing custom rom in my micromax a120.. i format dalvik cache, cache and mounts/storage to. then rom not installing it stuck on logo screen. i tried to flash stock rom but its also stuck on logo screen. please help me out.

ankurgiri65 said:
im installing custom rom in my micromax a120.. i format dalvik cache, cache and mounts/storage to. then rom not installing it stuck on logo screen. i tried to flash stock rom but its also stuck on logo screen. please help me out.
Click to expand...
Click to collapse
Hello and welcome to XDA-developers!
You have to do all required steps to flash custom/stock ROM.
1. Factory reset
2. Wipe System, Data, Cache/dalvik
3. Flash ROM
4. Reboot

FSadino said:
Hello and welcome to XDA-developers!
You have to do all required steps to flash custom/stock ROM.
1. Factory reset
2. Wipe System, Data, Cache/dalvik
3. Flash ROM
4. Reboot
Click to expand...
Click to collapse
i tried but not working....