EOS update stuck on the first screen - Eee Pad Transformer Q&A, Help & Troubleshooting

I received notification of an update because it was not updated so that download the zip of the rom go into recovery do the usual steps to flash the rom reboot and freezes the screen asus eee pad retrying again nothing unloading the file from the PC I insert in the sd and tried again but crashes at the same point I tried it with other rom and do the same which may be the problem?

Flash the latest stable KatKiss in recovery, this is the replacement for EOS4 which has been discontinued
Make sure you have TWRP recovery installed, if you don't, use Easyflasher to install it first
Wipe Cache and Dalvik Cache and System, then flash the ROM
http://downloads.timduru.org/android/tf101/K.A.T/KatKiss/stable/KatKiss-4.2.2_224.zip
Then flash Gapps
http://goo.im/devs/teameos/roms/eos4/gapps/gapps_4.2.2_TF101_20130323b.zip
Then wipe Cache and Dalvik Cache again
Then Reboot

Also, the last EOS version (121) had some boot and microSD issues. Stick with EOS 120 or move to KatKiss.

I do not have TWRP recovery installed
I can install it now?
I have to flash the zip?

pilletta said:
I do not have TWRP recovery installed
I can install it now?
I have to flash the zip?
Click to expand...
Click to collapse
Which recovery do you have installed?
May be you can flash this ROM: http://forum.xda-developers.com/showthread.php?t=1245892 first, before you are be able to install TWRP. Because now you can not install any recovery!!
For all Jellybean ROMs is TWRP needed!!!

I installed TWRP and installed Parandroid rom to try it but now I can not get into recovery because to most?

Can you get to recivery holding VOL DOWN and POWER until you see the small white text then tap VOL UP immediately?
How about if you open a terminal emulator and type:
su
(Grant root if prompted)
reboot recovery

Related

[Q] Problem With Flashing SCH-I535

The very first ROM I tried to flash was a version of CarbonRom. I was unsuccessful, as i got the installation aborted message. I then tried a couple of other lesser know ones, with the same luck. Lastly I tried CM 10.1, and with that, i had success. It was the only one that would work so far. Yesterday, I downloaded DU 4.2.2, and A new nightly version of Carbon (Specifically for my phone) With no luck of installation. Am i doing something wrong with these? Is there a different method of flashing i'm missing?
what is the procedure you take to install?
I usually go this route:
1) Boot into whatever recovery you have
2) Wipe Cache/Davlik
3) Install custom ROM
4) run a factory reset
5) Reboot
snibe said:
what is the procedure you take to install?
I usually go this route:
1) Boot into whatever recovery you have
2) Wipe Cache/Davlik
3) Install custom ROM
4) run a factory reset
5) Reboot
Click to expand...
Click to collapse
I have Philz custom recovery which based on cwm version 6.0.3.7 which when you tap wipe data you will then have the option to clean install for new ROM.
jmxc23 said:
I have Philz custom recovery which based on cwm version 6.0.3.7 which when you tap wipe data you will then have the option to clean install for new ROM.
Click to expand...
Click to collapse
Sorry for not replying earlier, i never got a notification. I'm using the most recent version of CWM. My usual order is :
1. Boot into recovery
2. Factory Reset
3. Clear Cache Partition
4. Wipe Dalvik
5. Format /system
6. Mount /system
7. Flash new ROM
Bcaraway14 said:
Sorry for not replying earlier, i never got a notification. I'm using the most recent version of CWM. My usual order is :
1. Boot into recovery
2. Factory Reset
3. Clear Cache Partition
4. Wipe Dalvik
5. Format /system
6. Mount /system
7. Flash new ROM
Click to expand...
Click to collapse
well we now have 3 custom recoveries to choose from I like the newer one since I can install a new ROM in fewer steps.
i would do a factory reset after you flash your rom too, can't hurt.
of course on updating the same ROM, I only Wipe Cache/Davlik and that's it.
Bad download? Does the md5 match?
after making sure you wiped everything make sure the download itself was proper I am running it flawless right now

Bootloop CWM ok+no format data+rom bootloop+no pc[SOLVED]

Hello,
First sorry for my English, i´m from Spain and i read-speak only a little.
I've been searching for a solution for my problem but i cannot find it.
On Friday when I had in my hands my TF101 (i just in chrome browser) just restarted, and restarted it again in a loop.
The first thing I did was go to Recovery ( CWM Recovery 3.2.0.1 -r1 Roach2010 ) to run a backup .
I try a cold boot, without results.
Then I try to restore to a previous backup and follows restarting.
Next i try was to install the stockrom I had previously installed, the last StockRom recovery from wipes and did the install , reboot the blue bar goes loading screen asus just restarts and restarts and restarts.
I think that the installation can't be completed because the restart.
Then, I do a wipe data/factory reset and I get an error.
I can not delete a file(/data/data/com.asus.reader/cache/files/media_external_file176Satellite.pdf ) and CWM cancel the formatting /data.
I try to make a format / data and I get the same error.
I´ve tried doing all wipes (data can't) installing all my previous buckups. Everything seems to be installed but reboot continue.
Otherwise I tried to connect to the PC ( 3 to be exact) OS: Vista x64, 7, 7 x64, Linux x64, Linux live cd.
I pressed Pwr + Vol + from 6-60 sg, after shutoff my tablet from CWM, connecting the usb cable before or after and no detects the TF101 .
I ordered a new cable, but mine seems to be good and i can charge the TF101 without problems.
I have read as Xda-topics as I can , I haven't seen in any solution to my problem ( CWM Recovery working + no format data + bootloop + pc no connection).
I´m afraid of brick my tablet. Only lives in recovery, no Android (reboot), no apx, no adb.
What can i do to format /data ?
Can I flash from my actual CWM another Recovery (maintaining the functionality of the microsd ) as TWRP? what happend if failed?
Thanks
PD. I really learn a lot with this problem reading yours posts.
Thanks
1.) Put this flashable zip on your Micro SDCard
http://nexfiles.kjonigsen.net/tf101/twrp/twrp2.6-tf101-unofficial.beta.zip
2.) Flash it from inside CWM Recovery
3.) Reboot tablet into recovery, check that TWRP is the new recovery
4.) Copy this ROM on to MicroSD Card
http://downloads.timduru.org/android/tf101/K.A.T/KatKiss/dev/KatKiss-4.2.2_226.zip
5.) Copy Gapps onto Micro SDCard
http://goo.im/devs/teameos/roms/eos4/gapps/gapps_4.2.2_TF101_20130323b.zip
6.) Boot into TWRP recovery
7.) Wipe SYSTEM, DATA, CACHE, DALVIK CACHE
8.) Flash ROM, Flash Gapps,
9.) Wipe CACHE and DALVIK CACHE one more time
10.) Reboot into working Jellybean ROM
The above will wipe everything clean and install a fresh JellyBean ROM to your tablet
First thank you very much Detection.
My new usb cable should arrive today and i'll try to apx mode recongnition.
In any case I downloading the files you provided me, but i have one question
*Detection* said:
1.) Put this flashable zip on your Micro SDCard.
Twrp Downloaded
2.) Flash it from inside CWM Recovery
Ok, i can.
3.) Reboot tablet into recovery, check that TWRP is the new recovery.
Click to expand...
Click to collapse
Here i must to reboot into new recovery from old recovery. Not need reboot tablet to OS (bootloop) ¿ok?
Thanks, thanks, thanks.
Edit:
I do it, i flashed TWRP, reboot and reboot into RCK. ok
Now copying camera data to microsd, and ready for wipes.
Thanks.
Sounds like you are making good progress
No need to reboot into OS, just into new TWRP recovery, then wipe and flash new ROMs etc
*Detection* said:
Sounds like you are making good progress
No need to reboot into OS, just into new TWRP recovery, then wipe and flash new ROMs etc
Click to expand...
Click to collapse
Yes, thanks.
I plugged my tf 101 with my new cable and now is detected in windows 7 x64. Naked drivers installed.
But before that, i flash TWRP recovery and it's fantastic. I can copy all my photos to microsd. I need to have this out TF101.
Now i installing the rom and gapps, but seems to be freeze on the four colour circles screen.
More than 20 minutes.
I'm thinking on reflash all an try again.
Thanks Detection.
Make sure you wiped everything before flashing the ROM & Gapps
The animation should not freeze during boot
I do all wipe data, cache, system, dalvik.
flash rom
flash gapps
wipe cache and dalvik
reboot.
and, not freeze but keeps moving and now + 30 minutes.
Something's bad.
I'm thinking on trying apx mode to solve.
Maybe
EDIT - See if it boots without Gapps first (Wipe everything again but only flash ROM)
1.) EDIT - Try this
http://www.putlocker.com/file/42672030BC26BD2F
Use Easyflasher to flash TWRP again, then try wiping and flashing ROM and Gapps again
IF THE ABOVE FAILS DO THIS:
2.) Ok, try this to rebuild the Partitions, this will flash the stock ROM to your tablet, if you have SBK1 (Serial number B6O or before, some B7Os)
http://www.xdafileserver.nl/index.php?dir=Asus%2FAsus+Transformer+%28TF101%29%2FSTOCK+ROMS%2FICS+.27
Choose US or WW
Connect TF to PC > Power Off TF > Put TF into APX mode (Vol Up & Power)
PC will recognise TF but nothing on TF screen will show
Extract the ROM above > Run download.bat as Admin (Right click > Run as Administrator)
Let it flash the ROM, this takes a while, maybe 10+ minutes
If that works, and you can boot, we can use Easyflasher to root and install TWRP again, and then flash Jellybean ROM again
I tried flashing rom and gapps again. No works, keeps on 4 turning circles screen. I leave it all night connected to AC Power. This morning was in the same screen.
I tried flashing rom, wipes, reboot. No works keeps on 4 turning circles screen. After 1 hour i restarted.
I'm going to try easyFlasher metod. I'll update progress.
My tf101 is B80 that's Sbk2. ok? Then, how can i rebuilt the partitions?
Thanks.
UPDATE 1.
easyFlasher WORKED¡¡¡¡¡¡
Now I'm on Stock.
I flash recovery and also WORKED¡¡¡¡¡
Next work:
Fisrt root
Afteri ready to KatKiss.
UPDATE 2.
Flashed superuser.
Reboot
Flash KatKiss 226 and gapps.
Then not reboot. But coldboot done.
¡¡¡SOLVED!!!
Thanks Detection.
Ok, you can't use NVFlash with SBK2, but you can use Easyflasher
Try using Easyflasher I posted here in SBK2 mode and flash TWRP
http://www.putlocker.com/file/42672030BC26BD2F
Then try wiping everything and flashing ROM and Gapps again
If it still won't work, wipe again and try a different ROM
ROM
http://downloads.timduru.org/android/tf101/K.A.T/KatKiss/4.3.1/dev/KatKiss-4.3.1_028.zip
Gapps (Only for this ROM)
http://downloads.timduru.org/android/tf101/gapps/gapps-KatKiss-4.3_20130914.zip

[Q] TRansformer 101 in loop help

I had katkiss 4.3 running on my pad and tried to update to ktkiss 4.4 and it came up with error . Then when I rebooted it hung in start up screen. So I rebooted into twrp recovery and reinstalled the backup I had made before I started . all seemed to go ok until I rebooted now all I get is
First the asus startup screen comes on then the twrp screen comes up but I get no menu its on a couple of seconds then goes blank I then get the following come up in bottom corner.
Verifying file system
Verifying partition size
Formatting/ data
wiping data without wiping /Data/media
Formatting cache
It then keeps repeating this again in a loop. I have tried to use easy flasher but because it keeps restarting it will not recognise the drivers on my pc. Can anybody help or have I bricked it
With thanks
Mickr
Easyflasher uses APX mode, did you make sure the TF was in APX mode first ? (Volume Up & Power)
If it is rebooting even in APX mode, sounds like a more serious hardware error
*Detection* said:
Easyflasher uses APX mode, did you make sure the TF was in APX mode first ? (Volume Up & Power)
If it is rebooting even in APX mode, sounds like a more serious hardware error
Click to expand...
Click to collapse
I have managed to reinstall twrp recovery and now want install the katkiss rom , do I have install the standard asus rom first and then reroot it before I can install the katkiss rom
with thanks
No, just flash any custom ROM you like from TWRP, forget about stock ROMs now
Just make sure you wipe everything first if your coming from Stock, then flash ROM & Gapps, then wipe Cache & Dalvik Cache, then reboot
*Detection* said:
No, just flash any custom ROM you like from TWRP, forget about stock ROMs now
Just make sure you wipe everything first if your coming from Stock, then flash ROM & Gapps, then wipe Cache & Dalvik Cache, then reboot
Click to expand...
Click to collapse
Thanks for that now up and running
Mickr
Good stuff

My P6800 kitkat 4.4.2 problem! can not boot.

I flashed omni-4.4.2-20140124-p6800-HOMEMADE.zip last night, but it can't work , when I boot system . it stay on OMNI logo screen. And I can not enter twrp 2.6.3.1 too. Is it brick? but I can enter odin mode . any one can help???? thanks
I wanna ask daniel_hk but I just a junior and I can't post at " Android Development" . help!!!!!!
Either flash full official firmware package with Odin or try re-flash recovery and (if successful) wipe, and then restore your Nandroid.
linvas said:
I flashed omni-4.4.2-20140124-p6800-HOMEMADE.zip last night, but it can't work , when I boot system . it stay on OMNI logo screen. And I can not enter twrp 2.6.3.1 too. Is it brick? but I can enter odin mode . any one can help???? thanks
Click to expand...
Click to collapse
Full wipe by CWM before upgrade to 4.4.
1) Reboot to cwm recovery
2) Do full wipe data, cache and davik cache
3) Reboot to cwm recovery again
4) Install KK442
5) Install Gapps
6) Install supersu (optional)
7) Reboot to system
69444091 said:
Full wipe by CWM before upgrade to 4.4.
Click to expand...
Click to collapse
HAPPYFATHER said:
1) Reboot to cwm recovery
2) Do full wipe data, cache and davik cache
3) Reboot to cwm recovery again
4) Install KK442
5) Install Gapps
6) Install supersu (optional)
7) Reboot to system
Click to expand...
Click to collapse
OP says cannot boot into recovery.......
That's why I suggested to flash firmware package or recovery with Odin.
Without a working recovery, it's the only option. From there, he can move on.
Sent from my GT-I9500 using XDA Premium 4 mobile app

[GTab 2 7.0] Can't install custom 4.4.4 ROMs

I can't install custom ROMs on p3113
Steps Taken
Starting with stock firmware/recovery
using chainfire autoroot
reboot
use root checker to confirm root
Use Odin to flash a custom recovery. (I tried Andi's CWM, TWRP, and also Philz touch 6.40)
Custom recovery flashes no issues and I can boot into custom recovery
I do factory wipe, then also dalvik, and cache again for good measure
Go to install a custom ROM via recovery
Go to reboot and the recovery prompts me that I need root and to asks gives me an option to install su
When I do that and reboot it bootloops.
I've tried 3 different recoveries. The ROMs I've attempted to flash are Dhollmen 4..4.4, and Andi's Omnirom 4.4..4.
It appears I can install 5.x ROMs without issue.
Any idea what I can do to fix this problem?
edit: in the process of trying twrp 2.8.0.5
edit2: no luck with 2..8.0.5 which I found on Dhollmen's thread. Going go browse through the forum looking for older recoveries.
Have you tried clearing /system
Yes
Try updating your SU binary before the flash, also try plain jane CWM, Andis CWM acts weird sometimes.
If SU binary won't update delete and install a different one, then update.
Pp.
Wipe cache
Wipe dalvic
Format /data
Format /system
Reboot recovery once
Flash rom.zip (don't flash anything else!)
Reboot into system, don't use "fix root"!
If it boots (Lollipop takes some time) your are good to go to flash gapps etc.
Send from OnePlus One using Tapatalk
Android-Andi said:
Wipe cache
Wipe dalvic
Format /data
Format /system
Reboot recovery once
Flash rom.zip (don't flash anything else!)
Reboot into system, don't use "fix root"!
If it boots (Lollipop takes some time) your are good to go to flash gapps etc.
Send from OnePlus One using Tapatalk
Click to expand...
Click to collapse
The only thing I wasn't doing was rebooting after wiping. Wiping then rebooting let me install the 4.4.4 ROMs no problem. I never would have figured this out thanks a lot. What causes the need to reboot after wiping?
@HappyRoot good to hear.
Seems like one of the partition wasn't unmount by the updater-script or recovery after wipe and caused that issue.
Send from OnePlus One using Tapatalk
Android-Andi said:
@HappyRoot good to hear.
Seems like one of the partition wasn't unmount by the updater-script or recovery after wipe and caused that issue.
Send from OnePlus One using Tapatalk
Click to expand...
Click to collapse
It only worked with installing SlimKat/Dhollmen I'm still unable to install Omni 4.4.4. I've done a complete wipe Odin'd twrp 2.8.4.1 and flash the zip via adb sideload. I keep getting an updater binary error.
update: twrp would crash at 37% and give me a binary error. when i odin'd updated cwm from you android file list i was able to get to 100% but then i would get a status 6 error.
Then you are doing something wrong...
Recovery log?
Send from OnePlus One using Tapatalk

Categories

Resources