Database Info

{OEM}[ROM][TUTORIAL] Micromax Funbook Original Livesuit Image LEAKED !!

UPDATE : just a quicknote, i just found out that this img file makes the /system partition of 503Mb instead of 251Mb as other img for MOMO9 or older tablets, So in order to have a bigger partition, one can flash this, then install anyother rom, for instance, cyanogenmod 9/10 full version instead of lite. Good luck flashing guys
___________________________________________________________________________________________________
Hey everyone,
Presenting a leaked version of ORIGINAL MICROMAX FUNBOOK livesuit image for P300 Model (from MM SC ). If you want to revert back to original rom, worry not, no need to copy that backup file & restore using CWM recovery. Some of us were even having trouble to revert back to original with cwm backups ( failed to restore /system error!). so here is it the answer to getting back to the factory state of our tablet.
Procedure:-
JUST DOWNLOAD THE 7z FILE, EXTRACT AND FLASH THE MMX_Funbook_P300.img IN THE SAME FASHION AS OTHER LIVE SUIT IMAGES. FOR TUTORIAL ON LIVESUIT & DOWNLOADING LIVESUIT REFER :-MOMO9 LIVESUIThttp://tabletrepublic.com/forum/ivi...-ployer-momo9-firmware-rom-releases-1610.html
Congratulations on getting 100% original software installed on your rom. Go & claim your warranty if you want ( tho MM suck at it to the core )
POST INSTALL NOTES
Once you have flashed this image, you will find yourself with following specifications :-
Baseband 1.2
Build Number 97F1-D1-H2-MMX.20120914
If at this point you want to get another rom installed or you have to get root, install superuser & get clockworkmod recovery the old methods does not hold any good. You have to follow this procedure to get root & install cmw recovery. THIS METHOD IS SAME AS FOR ALL ROMS WITH BASEBAND 1.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Getting the power of ROOT
Now the easiest way to get root is to use UnlockRoot software which works as a charm with our funbook device. Just connect usb cable, enable debugging & press unlock on the software. Then after the tab is restarted (by the software) you get root & superuser installed.
Getting CMW recovery on the tab
Once rooted we need to install ES File Explorer on our tab. Once installed, Go to settings, in root options tick the all boxes
Make sure superuser prompts, hence verifying successful installation of superuser. If not GET SUPERUSER UP & RUNNING FIRST.
Then navigate to the root folder by pressing back key. Stop where it says press back again to exit. ( in address bar the address will be / )
Next there will be a folder named Dev(/). long press on this folder & scroll down to set properties. Then click change, check all the boxes are ticked
Repeat the above steps with data folder (/), block folder (/dev/block), nandg file (/dev/block/nandg)
Finally all the complex part is behind us, to ultimately install the CMW recovery now, just use your old cmw recovery script for ICS, run it & done, it will be installed. Reboot & check pressing the volume down key + menu key & power key.
Njoy guys .... have fun & oh .. hit thanks too
DOWNLOAD
JUST DON'T FORGET TO VERIFY THE MD5 Sumcheck
58991EC458A6DC3421004202C0F7E929
PS: I am not responsible for any of the content nor do i take any credibility for providing the content! , i found this on the WWW & just sharing using a highspeed file server (MEDIAFIRE) and a simple guide all in one place. Don't blame me if this method do any harm or brick your tab. I did my best to be safe, i tested this & flashed successfully 4 times on my funbook p300 & its working for me. !!!!

Hey thanks a lot!! Will check this out once I am home..

Hey can u please upload this in some other site? the links given are no longer working

Links updated to 4shared can't find any other website for larger file size. Hit thanks if i helped :victory::laugh::good:

mechexpert said:
Links updated to 4shared can't find any other website for larger file size. Hit thanks if i helped :victory::laugh::good:
Click to expand...
Click to collapse
Hey thanks a lot for the quick response!! & sorry for the delay on my part..it worked like a charm..!! :victory::victory:

Link not working can you please re upload it... May be on dev host or make a torrent!!
Edit: it's working now
Sent from my LG-P970 using xda premium

anybody pls post link here pls ??? direct rom link...:silly:

PLS HELP A BRO IN NEED..
its not related but i thought u guys can help..i flashed a wrong zip on my fb and now when i tirn it on..it shows only white screen and then flashes white screen...i tried flashing livesiute img available at xda...but my pc wont detect my tab...im soo in middle of crisis..my 6k has gone waste...pls simeone..if can help me...i will be highly grateful and if my tabs works again..i will share poece of cake..(by recharging ur sim with some fair balance)as a token of gratitude. ...if someone living in delhi..can flash and make my tab work.,i will pay him a visit and 300 bucks...pls help me....cuz my handicapped brother uses this tab and im not financially good to purchase him another..
thank u..

devilanuj17 said:
PLS HELP A BRO IN NEED..
its not related but i thought u guys can help..i flashed a wrong zip on my fb and now when i tirn it on..it shows only white screen and then flashes white screen...i tried flashing livesiute img available at xda...but my pc wont detect my tab...im soo in middle of crisis..my 6k has gone waste...pls simeone..if can help me...i will be highly grateful and if my tabs works again..i will share poece of cake..(by recharging ur sim with some fair balance)as a token of gratitude. ...if someone living in delhi..can flash and make my tab work.,i will pay him a visit and 300 bucks...pls help me....cuz my handicapped brother uses this tab and im not financially good to purchase him another..
thank u..
Click to expand...
Click to collapse
oh really sorry for such late reply ... but have you tried installing another copy (fresh copy) of livesuit from the internet ? have you properly connected the tablet by pressing the vol - & options button simultaneously & hitting the power key 10 times ???
i have tried almost all those firmwares out there for funbook or momo9 ... i have faced this issue many times but you might not be pressing the button configuration accurately ... rest assured your tab is fine & 6k is not a waste as u might think !!! GOOD LUCK & report back if you still face problems, i'll help you step by step if needed !

funbook
will it work for p500?

rushiachrekar said:
will it work for p500?
Click to expand...
Click to collapse
i am afraid not, it *MIGHT* work on other tablets with ALLWINNER A10 processor.

Please help me to connect to pc

Am using galaxy s duos 2 (gt s7582) with stock ROM n kernal but rooted , bootloader not unlocked yet. Since 3-4 days before I got a problem that I can't connect this to any PC. When connecting only charging mode is activated. In my phone there is no USB settings accessible. So that I can't flash anything. I tried with some apps on playstore (USB settings, USB switch) ,but those r also sadly failed. When using USB settings it shows the stock USB options but no effect when changing it. What should I do . how can I solve it. Oh.. One more thing .. I tried also factory reset 2-3 times but this thing only not working. And test with 2-3 PC. But I could connect other Samsung mobiles on those PCs with same USB cable on same port successfully.. !! PLEASE HELP ME..
Sent from my GT-S7582 (Galaxy Grand Prime) using XDA-Developers mobile app

arbeenster said:
Am using galaxy s duos 2 (gt s7582) with stock ROM n kernal but rooted , bootloader not unlocked yet. Since 3-4 days before I got a problem that I can't connect this to any PC. When connecting only charging mode is activated. In my phone there is no USB settings accessible. So that I can't flash anything. I tried with some apps on playstore (USB settings, USB switch) ,but those r also sadly failed. When using USB settings it shows the stock USB options but no effect when changing it. What should I do . how can I solve it. Oh.. One more thing .. I tried also factory reset 2-3 times but this thing only not working. And test with 2-3 PC. But I could connect other Samsung mobiles on those PCs with same USB cable on same port successfully.. !! PLEASE HELP ME..
Sent from my GT-S7582 (Galaxy Grand Prime) using XDA-Developers mobile app
Click to expand...
Click to collapse
step1-install busy box app from here-https://fs07n3.sendspace.com/dl/f0bfd378acfa24606148ea74fb7e0ae5/5734c09f0fa51662/23s81l/stericson.busybox-40-APK4Fun.com.apk
step2-install mass storage enabler-http://www.apk20.com/apk/47248/start
open busybox tap on install when installation popup occurs reopen it and wail for busybox loading to 100%
connect your phone to pc and open mass storage enabler
grant root permission
click on mass storage mode
done!!!!!!!!!
but if this method isn't work with odin than contact me
.
.
.
hit thanks if i help you..:good:

Thanks in advance ,
before that i am facing one more big problem. i tried an app for easy access on recovery and safemode. i just click on boot on recovery button but now my duos 2 doesnt load android it stucks on samsung logo with a red '!' on left upper corner . even recovery cant load. i could turn on download mode but untill my usb getting normally , i think it will be useless.

charlesxd2016 said:
step1-install busy box app from here-https://fs07n3.sendspace.com/dl/f0bfd378acfa24606148ea74fb7e0ae5/5734c09f0fa51662/23s81l/stericson.busybox-40-APK4Fun.com.apk
step2-install mass storage enabler-http://www.apk20.com/apk/47248/start
open busybox tap on install when installation popup occurs reopen it and wail for busybox loading to 100%
connect your phone to pc and open mass storage enabler
grant root permission
click on mass storage mode
done!!!!!!!!!
but if this method isn't work with odin than contact me
.
.
.
hit thanks if i help you..:good:
Click to expand...
Click to collapse
but this method also didnt help me.. it showin same as previousl..
when i restart mobile while it on usb, windows detected it but showing unknown device. the usb device not recognized. its reason says "the location of the device is shown in bold type". what is that ??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

try to use it with another pc if this not work than buy new usb cable or may be you broke your phone usb port
.
.
.
hit thanks if i help you...:good:
Sent from my GT-S7582 using XDA-Developers mobile app

charlesxd2016 said:
try to use it with another pc if this not work than buy new usb cable or may be you broke your phone usb port
.
.
.
hit thanks if i help you...:good:
Sent from my GT-S7582 using XDA-Developers mobile app
Click to expand...
Click to collapse
Oh .. ok.. then should i try with changing new usb port first..??

arbeenster said:
Oh .. ok.. then should i try with changing new usb port first..??
Click to expand...
Click to collapse
best of luck...:good:
.
.
.
hit thanks if i help you...:good:

[GUIDE] Fixing hard bricks [Qualcomm HS-USB QDLoader 9008]

Fixing dead L70+ devices​
EVERYTHING IN THIS GUIDE IS DANGEROUS AND CAN COMPLETELY DESTROY YOUR DEVICE IF DONE INCORRECTLY. YOU HAVE BEEN WARNED
PLEASE READ EVERYTHING​
DO NOT DO THIS IF IT'S ONLY A SOFT BRICK!!!
By following this guide you agree that I TAKE NO RESPONSIBILITY FOR BRICKED OR DAMAGED DEVICES.
You and only you decided to follow these instructions.
Click to expand...
Click to collapse
What is a dead (hard bricked) device?
A dead or "hard" bricked device is a device that has been bricked beyond repair. Usually a corrupted boot partition failing to load the kernel or any type of recovery menu in order to restore. Motherboard swap is most commonly done in order to fix such device. Some devices such as our own have "leaked" service packages that can be used to restore a hard bricked device. Beware that this is not a 100% guarantee. It might or might not work.
Click to expand...
Click to collapse
How do I know if my device is hard bricked?
It would fail to boot and enter recovery/download mode. When connected to a PC and powered on Windows will detect it as Qualcomm HS-USB QDLoader 9008.
Instructions​
Download and install drivers from here
Download BoardDiag v2.99a from here
Download TOT files from here
Unpack all archives in a new folder in the root of your C: drive. Everything including the tot file.
Remove the batter from the device
Plug the device in to the PC via the USB cable.
Place battery back
Open BoardDiag and set it up as such:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AP Chipset: W3 W5 (ms8610)
Com Port: Get port num from device manager.
Target Dir: The new folder you created in the root of C:
BIN: Select .tot file
DIR: The new folder you created in the root of C:
Click to expand...
Click to collapse
Click on the EXTRACT button and wait until it finishes.
Make sure there are ticks on AP Check and EMMC Test !
Press START and wait until the program finishes.
When done it's safe to disconnect the phone from the PC.
Pull the battery out and place it back in and try to enter Download mode. If successful you should be able to flash KDZ following this guide.
Translated and re-formatted. Original guide by @kossrap @ 4pda.
Happy flashing!

Reserved

Reserved 2

Great to have new tools with Qualcomm chipsets

The BoardDiag have no "msm8916"

hi, I tried this guide, but I could not get my lg d290n, ap test ok, EMMC ..test failed test, dsram okay, where am I wrong? someone can help me because I'm not very good?

marcello1977 said:
hi, I tried this guide, but I could not get my lg d290n, ap test ok, EMMC ..test failed test, dsram okay, where am I wrong? someone can help me because I'm not very good?
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/d290n/how-to/guide-reflashing-stock-rom-d290-d295-t3142456

I have this problem 3 months ago , but i dont found solution yet for my Samsung -SM-N910F , sorry for my bad english :/

Need help please. I can't find the COM Port of my device. It just says "QHSUSB_BULK" under other devices. Doesn't say the port number. Anyone can help?

How to flash for htc one m8 in hsush qdload 9998
Sent from my HP 7 VoiceTab using XDA Free mobile app

Please Help
This happened after I clicked the start button...
please help

im trying to fix two LG fino with this one.
both were successful but I am still unable to boot to download mode

s4h1k0 said:
im trying to fix two LG fino with this one.
both were successful but I am still unable to boot to download mode
Click to expand...
Click to collapse
If you can boot in system, you can enable developer settings, connect the phone to your pc and try "adb reboot edl"

sorry it seems that I missed some steps.
I still cant go to downlaod mode

s4h1k0 said:
sorry it seems that I missed some steps.
I still cant go to downlaod mode
Click to expand...
Click to collapse
I think you need to restore the files using restore boot img, check this guide http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359

Hi My phones Lg G Pad 10.1 LG-VK700 hard brick after me flashing rom wrong Can u help me How to fix it ? Thank for help
lamyean122gmail.com

dibowz said:
This happened after I clicked the start button...
please help
Click to expand...
Click to collapse
I'm having the same problem as yours, does anyone have a solution? thanks, need help

Is this compatible with lg l fino d290n? And if yes, why the TOT file to download has the name "LGD295V10eCIS.7z"?
Sorry for my English

Hello, this method and post files can be used for a LG L70 MS323 v10c Metro PCS, sorry for my English...

Can i use provided D295N .tot file on a D290G?

Firmware For Sony Xperia R1 PLUS g2299

Hii
I'm searching for Sony Xperia R1 Plus G2299 firmware
with .mbn file and .xml file
My phone is hard bricked with light blinking when put on charging
It also detected by computer as Qulacomm hsb loader device
But I unable to find firmware with .mbn format
Another way it to flash with S1 TOOL
but it need firmware with APPSW, ELABEL, FSP .sin_set file and I've found nothing
So please If someone knows how to get it or how to unbrick my sony Xperia R1 plus G2299 mobile reply
Thank You

sbhawani051 said:
Hii
I'm searching for Sony Xperia R1 Plus G2299 firmware
with .mbn file and .xml file
My phone is hard bricked with light blinking when put on charging
It also detected by computer as Qulacomm hsb loader device
But I unable to find firmware with .mbn format
Another way it to flash with S1 TOOL
but it need firmware with APPSW, ELABEL, FSP .sin_set file and I've found nothing
So please If someone knows how to get it or how to unbrick my sony Xperia R1 plus G2299 mobile reply
Thank You
Click to expand...
Click to collapse
You found anything? why there is no ftf file for it bro?

Writu said:
You found anything? why there is no ftf file for it bro?
Click to expand...
Click to collapse
No nothing, I can't find it anywhere. Sony never released firmware for this model. But, I'm still hoping to get something

Writu said:
You found anything? why there is no ftf file for it bro?
Click to expand...
Click to collapse
Found a rom but without .mbn file attached the screenshot with all the files I got. Any idea how to use these files with out using UMT_Qcfire I cen't afford it.
Also I found website which may help " https://forum.gsmhosting.com/vbb/f9...us-g2299-hang-logo-done-2619023/#post14707534"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello, to all whoever watching the comment. I want to tell that I've completely revived my Sony Xperia R1 plus G299 model using the rom I found on the website. It's working perfectly. I used the UMT for flashing the firmware. If you guys want the Rom for G299 for flashing. Message me here or write a comment. I'll provide you with firmware.

can you please provide the firmware and steps. it would be a great help!

As_373 said:
can you please provide the firmware and steps. it would be a great help!
Click to expand...
Click to collapse
Sure, I'll provide you with firmware. But I have to give you warning before you do any steps of it
After Flashing the firmware my phone have lost it's IMEI number only its Wi-Fi and Bluetooth is working.
Also this method is just for Sony Xperia R1 Plus which is hardbricked means it doesn't turns , screen shows nothing when pressed button only shows red led blinking when charging cable is used.
Note: If you don't wanna to loose it's IMEI please don't use this method.
Requirements: - Ultimate Multi Tool software, Qualcomm USB Drivers & firmware.
Steps: -
1) Please install the UMT in your system/computer. You'll need to purchase it's usb as this software is not free or you can go nearest mobile repair shop as they do have this software generally or see if your friend have one.
2) Please install Qualcomm usb drivers.
3) If your phone is hardbricked this method works on it only. So open your phone back panel reach to it's motherboard.
4) Now after reaching find Sony G299 Edl points and short them but remove battery first. After shorting both edl points keep them shorted and insert the USB cable in phone and then in your computer. (You have to keep edl point shorted until you plugged the cable)
4) In your device manage you'll see the a usb COM port will be shows (It'll be like this Qualcomm HS-USB Qloader 9008 COM and some number).
5) It means your device is not connected in EDL mode if not try repeating the step above. If it worked make sure the device name shown in device is not showing any kind on error mark in device manager like this
if it does. That means your QC Usb drivers are not good. Seek help on youtube if this happens as this error is not gonnalet us flashing the firmware.
6) Open the UMT tool and choose the flasher option on top. Next make sure its on Single program mode. Below that you have to provide patch file and Xml file. You can do that by going into firmware folder which you've downloaded. It'll automatically detect the file format you just have to select it and then after all is done hit FLASH button.
It'll flash the software in sometime and your phone will reboot after that. But from my result it'll not have it's IMEI number anymore sony IMEI repair is not easy and you'll need to visit service centre maybe.
Here the firmware: - Firmware (https://www.mediafire.com/folder/6tpen9umgcou4/SONY_G2299_S000028_171102_2017-09-01)
Let know how it worked for you.

thank you so much!

Samsung Note 4 Costum Rom Installing

Hello, I've found a Galaxy Note 4 in my room and decided to put twrp or something on it but when i plug it in my laptop it says device not recognized
I've tried everything, Kies, drivers smartswitch
I rebooted in download mode put the tar file in odin in AP
And I get
<OSM> All threads completed. (succeed 0 / failed 0)
Please help me

Hey man, try unplugging and plugging it in again..... and maybe head into windows update and look for a driver wanting to install that is waiting for approval.....
What is the exact error message displayed on the laptop and what do you see in odin when you flash....send screenshots pls.
I can help.

monsiu said:
Hey man, try unplugging and plugging it in again..... and maybe head into windows update and look for a driver wanting to install that is waiting for approval.....
What is the exact error message displayed on the laptop and what do you see in odin when you flash....send screenshots pls.
I can help.
Click to expand...
Click to collapse
Ok so
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Device settings for USB\VID_0000&PID_0002\5&388db30c&0&1 were migrated from previous OS installation.
Last Device Instance Id: USB\VID_0000&PID_0002\5&388db30c&0&1
Class Guid: {36fc9e60-c465-11cf-8056-444553540000}
Location Path:
Migration Rank: 0x0
Present: false
EDIT: I Checked but nothing

I put it in download mode but yeah
I knew it was something blue on odin
@monsiu

Yea a blue bar should appear saying (0) com showing that a device is connected.
kindly first try going back to stock rom....then try the twrp using odin.
Try all of these and see if it works....
How to Fix Code 43 Errors
How to fix a Code 43 error—"Windows has stopped this device because it has reported problems." A hardware problem is often the issue.
www.lifewire.com
My suggestions:
1)It could be an issue with your pc rather than your phone so maybe try using another pc
2)Try changing the cable and use another usb...the usb could be faulty
But just try the things in the article above

monsiu said:
Yea a blue bar should appear saying (0) com showing that a device is connected.
kindly first try going back to stock rom....then try the twrp using odin.
Try all of these and see if it works....
How to Fix Code 43 Errors
How to fix a Code 43 error—"Windows has stopped this device because it has reported problems." A hardware problem is often the issue.
www.lifewire.com
My suggestions:
1)It could be an issue with your pc rather than your phone so maybe try using another pc
2)Try changing the cable and use another usb...the usb could be faulty
But just try the things in the article above
Click to expand...
Click to collapse
It is the stock rom, AT&T SM-N910A US model

I'll try on my dads laptop wish me luck

XzePlayz said:
I'll try on my dads laptop wish me luck
Click to expand...
Click to collapse
you got this

monsiu said:
you got this
Click to expand...
Click to collapse
Is there a service pack for win11?

The cable isn't a problem i tried 5 cables , same thing, i guess twmorrow i ll try on my dads laptop

Well, it dosen't work on my dads laptop either

Bios thing same, i just updated it

hahaha no.....there are no service packs for windows 11
i legit thought it would be an issue with os software or drivers or maybe cable.
I'm beat and i don't know what else you can try......
Sorry man

if you have samsung or another main device just try on connecting it and see if your pc can detect it..... (if you have samsung open odin and see if it can be seen)
Lets not give up lets go

Yes, my main phone, but i m scared to put it in download mode, it detects it as a storage device
monsiu said:
if you have samsung or another main device just try on connecting it and see if your pc can detect it..... (if you have samsung open odin and see if it can be seen)
Lets not give up lets go
Click to expand...
Click to collapse

hahaha download mode is not bad on your main phone. just dont flash anything accidentaly
I wanted you to see if your device is detected in odin

monsiu said:
hahaha download mode is not bad on your main phone. just dont flash anything accidentaly
I wanted you to see if your device is detected in odin
Click to expand...
Click to collapse
Ok butt how i exit download mode

I was having problems entering download mode but i entered it

cool it works....
to exit download mode you just hold power button and volume down...
doesn't it tell u when you load in the download mode tho?
XzePlayz said:
Ok butt how i exit download mode
Click to expand...
Click to collapse