Database Info

[Completed] Mstar S700 bricked+port COM conflict???

Hello everyone,
My S700 can't be powered on and it will not charge :crying: i think SP can detected my S700 yet but the device manager loop between "MediaTek USB port (COM14)" and "MediaTek Preloader USB VCOM (Android) (COM12)"... and me i'm crying !!! PLEASE HELP ME whta i will do ???
I understand that my last solution is to flash yet from the manufactor ROM... so to lost my work :'( but before i need to be sure that this troubles about my port COM 12 and 14 will make not more troubles ???
I hope you will understand better my troubles from this details :
*1/ I download the new S700 ROM from the manufactor website so i installed the drivers and flash it whith SP_MDT_exe_v3.1504-A2015.03.18-v06-customer => success! The 20150624_c218v13_jbl_a228_hd_3m_mstar ROM working well and during 2 weeks i install all my applications, contacts, ...
*2/ I try to transfer my sms from my old phone (Iocean X7hd) to my new S700 with Helium. It recognize my X7 and save my sms but it not working with the S700 (i opened a ticket to Helium) so i installed ALL MTK+ADB drivers found in this file www.adrive.com/public/fSxNQP/All MTK USB Driverv.9.2.PDanet.Adb 2015.zip => never working ! I remember about a conflict driver message...
*3/ I use MOBILedit ENTERPRISE_7_8_3_6076 to make a backup => it recognize my S700 and make a partial backup because my S700 is not rooted
*4/ I download the files from www.needrom.com/download/mstar-s700 about to root for version 20150624_c218v13_jbl_a228_hd_3m_mstar uploaded by fpiva4a : https://drive.google.com/file/d/0B358CZ0vWBWpcWZfV3A4bDFEaTg/view
*5/ I follow the tuto from forum.xda-developers.com/android/general/mstar-s700-review-5-5-hd-touch-id-t3132431/page3 so i open SPFT v5.1528, choose the download agent+scatter file from the fpiva4a's files :
- On the main screen choose firmware upgrade from the drop down menu
- Pull out the battery and connect your phone to your PC, let the SPFT and the phone initiate a 'handshake' => there is nothing (i don't remeber if at this step the device manager loop already...)
- Unplug your phone from the USB cable. Click on the download button on the main screen. Now put your battery back into the phone and plug in the phone to your pc using the usb cable=> the SP Flah Tool start and see a progress bar but i have this error :
" BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)
There is file not loaded yet!!
[HINT]:
1. Please check if the DA path is correct.
2. Please check if all the ROM files exist.
3. Please check if the scatter file description is sync with the exist ROM files"
*6/ I click on help+ok, close SP and unplugg my S700 => i can't be powered on !!!
*7/ I plug the USB cable and i heard sound to mount it and after loop to unmount => i thought about a conflict (step */2) so from the device manager i try to unistall the "MediaTek USB port" and "MediaTek Preloader USB VCOM (Android)" what loop. Also i uninstall from the Control Panel W7 all the drivers installed by step */2
*8/ I try several times the *5/ but always like */6 my S700 not power on
*9/ I use USBdeview and try to uninstall my port => the green line always loop between this 2 lines
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and i open the SP_MDT_exe_v3.1504-A2015.03.18-v06-customer from step *1/ => the scan is well and find my S700 on the port COM12
thanks for your help and sorry for this big post but i wanted to follow all the details even if i read all your link i don't find a specific reply about my trouble

Fail test
Several helpers said me to resolve my mistake when i want to try new recovery+root to reflash with the manufactor ROM. So i come back to the step 1, I download the new S700 ROM from the factory website and flash it with SP Flash tool => by SP__MDT_exe_v3.1504-A2015.03.18-v06 or SPFT v5.1528 it was same : success DL but my S700 doesn't restart.... :'(
Instead of firmware upgrade i test also Format All+Download but my S700 doesn't restart :'( So now i don't know what i can do ??? pleassse

pee_why said:
Several helpers said me to resolve my mistake when i want to try new recovery+root to reflash with the manufactor ROM. So i come back to the step 1, I download the new S700 ROM from the factory website and flash it with SP Flash tool => by SP__MDT_exe_v3.1504-A2015.03.18-v06 or SPFT v5.1528 it was same : success DL but my S700 doesn't restart.... :'(
Instead of firmware upgrade i test also Format All+Download but my S700 doesn't restart :'( So now i don't know what i can do ??? pleassse
Click to expand...
Click to collapse
Hi, thanks for using XDA Assist!
Please ask for further assistance here:
http://forum.xda-developers.com/general/help
You'll find expert advice there.
Good luck!
Thread closed.

Root twrp Blackview E7

Rooting Guide For Blackview E7
install twrp Recovery and Root Blackview E7,
Instructions-
twrp Installation-
Download sp tools, twrp, supersu, vcom Driver from Below
[*]install correct vcom Driver on PC
[*]Run Sp Flash Tools, Load Scatter from Recovery Folder
[*]Uncheck Everything and then Check Recovery only
[*]under Recovery Section Load Downloaded twrp 3.0xx.img
[*]then click on Download
[*]as soon as connect your Switched of phone to your pc via usb and wait for success, after complete, follow Below Instructions To Root,
Rooting Instructions-
flash latest supersu.zip via twrp
Done
Hit a Thanks :good:
Downloads-
twrp- https://drive.google.com/open?id=0B2FqGTbqHQMgY0gtN1dSd0hJbnM
Screen Shorts-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Can you move the download to another file host? Because the download is broken always showing ads but no download. Thanks in advance.
P.S Is the phone supposed to be in download mode or something? If so then how do we make it go in downloading mode?

02Victor said:
Can you move the download to another file host? Because the download is broken always showing ads but no download. Thanks in advance.
P.S Is the phone supposed to be in download mode or something? If so then how do we make it go in downloading mode?
Click to expand...
Click to collapse
Yep agreed nothing but spam so I've removed the link and closed the thread until the OP gives a proper download link
Regards
Sawdoctor

for root Blackview E7s
02Victor said:
Can you move the download to another file host? Because the download is broken always showing ads but no download. Thanks in advance.
P.S Is the phone supposed to be in download mode or something? If so then how do we make it go in downloading mode?
Click to expand...
Click to collapse
click here for twpr
hleo95itttps://mega.nz/90063544-6b9d-4da0-9901-27098c57b5fb (delete my nickname)
click here for SP Flash Tool
hleo95itttp://spflashtools.com/windows/sp-flash-tool-v5-1716 last version (delete my nickname)
later installation of twrp, for enter click volum + and power
100% working

leo95it said:
click here for twpr
hleo95itttps://mega.nz/90063544-6b9d-4da0-9901-27098c57b5fb (delete my nickname)
click here for SP Flash Tool
hleo95itttp://spflashtools.com/windows/sp-flash-tool-v5-1716 last version (delete my nickname)
later installation of twrp, for enter click volum + and power
100% working
Click to expand...
Click to collapse
Excuse me but the mega link you provided is kinda broken i think. After removing your name i get to the Mega homepage (while the key and address are still in the web address bar)
Are the files private or something?
Please help me or send me a pm

leo95it said:
click here for twpr
hleo95itttps://mega.nz/90063544-6b9d-4da0-9901-27098c57b5fb (delete my nickname)
click here for SP Flash Tool
hleo95itttp://spflashtools.com/windows/sp-flash-tool-v5-1716 last version (delete my nickname)
later installation of twrp, for enter click volum + and power
100% working
Click to expand...
Click to collapse
files doesn't work, can you move to another host please? and, can i root my blackview e7s with these files?

Leroya said:
files doesn't work, can you move to another host please? and, can i root my blackview e7s with these files?
Click to expand...
Click to collapse
I don't know. Because there is a specific scatter file for your particular model of phone.

Hey people i found a link to a Russian forum full with roms and thigs for our Blackview E7 check it out: http://4pda.ru/forum/lofiversion/index.php?t799594.html
Disclaimer: I don't know if any of these work because I haven't rooted my phone yet. Try these at your own risk.
PS: Can someone please explain to me how to get TWRP on the Blackview E7? I tried the latest flash tools and a recovery "meant" for my phone but no success. The green circle appears as tho it is flashed but nothing changed. Thank you in advance

Help My phone is Blackview E7
My cell phone is the Blackview e7s.... and I did not find his customized ROM so I can root, and I can not use the room of E7 because of the chip error or say it is for me to do recovery using the boot up
And version of my phone is MT6580

Milfaces said:
My cell phone is the Blackview e7s.... and I did not find his customized ROM so I can root, and I can not use the room of E7 because of the chip error or say it is for me to do recovery using the boot up
And version of my phone is MT6580
Click to expand...
Click to collapse
I am sorry but that is a different phone from the same company. There are other threads for how to root that phone. I can't help but suggested you google and find out.

How to unbrick Huawei G630-U20 ??

Hello guys,
I got two Huawei G630-U20 phones (one black and one white). They are both bricked during OTA Update as I understood the first owner.
I downloaded few tools, but they all need .xml profile file or .mbn. This phone is using Qualcomm MSM8212 Snapdragon 200. The problem is that I can't find unbrick files for this eMMC.
I think I need "prog_emmc_firehose_8x12.mbn"? -Do I need to go into QDloader mode by shorting these two test points on the motherboard in order to go through unbricking process?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just to mention that devices are recognised as "Qualcomm HS-USB QDLoader 9008 (COM9)" when the pins are shorted and as "Qualcomm HS-USB Diagnostics QDLoader 9006 (COM8)" when they are not shorted.
If you know any methods to unbrick it (without using boxes), please write it down.
Thanks!

up ://
Anyone for a help?

Sorry for late reply. I think it is EMMC problem. Many of them (which i tried to revive) was still dead even after successful firmware write with paid boxes (CM2QLM, Qualcomm Premium Tool and DC Phoenix). So my advice is to replace emmc (if you know how), or complete motherboard. Have more than 40 of them (G630-U20) in my repair shop with same problem. Cheers

fler_tb said:
Sorry for late reply. I think it is EMMC problem. Many of them (which i tried to revive) was still dead even after successful firmware write with paid boxes (CM2QLM, Qualcomm Premium Tool and DC Phoenix). So my advice is to replace emmc (if you know how), or complete motherboard. Have more than 40 of them (G630-U20) in my repair shop with same problem. Cheers
Click to expand...
Click to collapse
Thanks for your answer! Somehow I've found all needed unbrick files and write process succeeded, but both of the phones were dead again. So, Im also thinking that EMMC needs replacement... Too bad
Sve najbolje u 2018!
BlueDevZ

NeleRS said:
Thanks for your answer! Somehow I've found all needed unbrick files and write process succeeded, but both of the phones were dead again. So, Im also thinking that EMMC needs replacement... Too bad
Sve najbolje u 2018!
BlueDevZ
Click to expand...
Click to collapse
Life goes on ! Thank you and takodje sve najbolje i tebi u novoj

fler_tb said:
Life goes on ! Thank you and takodje sve najbolje i tebi u novoj
Click to expand...
Click to collapse
up! can you upload its files please?

please can you update .mbn file, raw program file and patch file for this huawei g630-u20? please help me

bollicine said:
please can you update .mbn file, raw program file and patch file for this huawei g630-u20? please help me
Click to expand...
Click to collapse
Link for full firmware G630-U20
Just delete spaces to create a link and copy/paste decryption key.
https: // mega.nz/ #!3pIzxD7D
Decryption key: !B_G_SPXY9RsABkxpeHH9e6PmaUz7Hd7w_DVUu1lwPuU

NeleRS said:
Thanks for your answer! Somehow I've found all needed unbrick files and write process succeeded, but both of the phones were dead again. So, Im also thinking that EMMC needs replacement... Too bad
Sve najbolje u 2018!
BlueDevZ
Click to expand...
Click to collapse
How you have gotten fix that error two times? With any program?

Hi, how can i short these two test points? I used something from metal or aluminium but nothing happends.

use umt box to convert app file to xml and flash it by umt box

Firmware For Sony Xperia R1 PLUS g2299

Hii
I'm searching for Sony Xperia R1 Plus G2299 firmware
with .mbn file and .xml file
My phone is hard bricked with light blinking when put on charging
It also detected by computer as Qulacomm hsb loader device
But I unable to find firmware with .mbn format
Another way it to flash with S1 TOOL
but it need firmware with APPSW, ELABEL, FSP .sin_set file and I've found nothing
So please If someone knows how to get it or how to unbrick my sony Xperia R1 plus G2299 mobile reply
Thank You

sbhawani051 said:
Hii
I'm searching for Sony Xperia R1 Plus G2299 firmware
with .mbn file and .xml file
My phone is hard bricked with light blinking when put on charging
It also detected by computer as Qulacomm hsb loader device
But I unable to find firmware with .mbn format
Another way it to flash with S1 TOOL
but it need firmware with APPSW, ELABEL, FSP .sin_set file and I've found nothing
So please If someone knows how to get it or how to unbrick my sony Xperia R1 plus G2299 mobile reply
Thank You
Click to expand...
Click to collapse
You found anything? why there is no ftf file for it bro?

Writu said:
You found anything? why there is no ftf file for it bro?
Click to expand...
Click to collapse
No nothing, I can't find it anywhere. Sony never released firmware for this model. But, I'm still hoping to get something

Writu said:
You found anything? why there is no ftf file for it bro?
Click to expand...
Click to collapse
Found a rom but without .mbn file attached the screenshot with all the files I got. Any idea how to use these files with out using UMT_Qcfire I cen't afford it.
Also I found website which may help " https://forum.gsmhosting.com/vbb/f9...us-g2299-hang-logo-done-2619023/#post14707534"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello, to all whoever watching the comment. I want to tell that I've completely revived my Sony Xperia R1 plus G299 model using the rom I found on the website. It's working perfectly. I used the UMT for flashing the firmware. If you guys want the Rom for G299 for flashing. Message me here or write a comment. I'll provide you with firmware.

can you please provide the firmware and steps. it would be a great help!

As_373 said:
can you please provide the firmware and steps. it would be a great help!
Click to expand...
Click to collapse
Sure, I'll provide you with firmware. But I have to give you warning before you do any steps of it
After Flashing the firmware my phone have lost it's IMEI number only its Wi-Fi and Bluetooth is working.
Also this method is just for Sony Xperia R1 Plus which is hardbricked means it doesn't turns , screen shows nothing when pressed button only shows red led blinking when charging cable is used.
Note: If you don't wanna to loose it's IMEI please don't use this method.
Requirements: - Ultimate Multi Tool software, Qualcomm USB Drivers & firmware.
Steps: -
1) Please install the UMT in your system/computer. You'll need to purchase it's usb as this software is not free or you can go nearest mobile repair shop as they do have this software generally or see if your friend have one.
2) Please install Qualcomm usb drivers.
3) If your phone is hardbricked this method works on it only. So open your phone back panel reach to it's motherboard.
4) Now after reaching find Sony G299 Edl points and short them but remove battery first. After shorting both edl points keep them shorted and insert the USB cable in phone and then in your computer. (You have to keep edl point shorted until you plugged the cable)
4) In your device manage you'll see the a usb COM port will be shows (It'll be like this Qualcomm HS-USB Qloader 9008 COM and some number).
5) It means your device is not connected in EDL mode if not try repeating the step above. If it worked make sure the device name shown in device is not showing any kind on error mark in device manager like this
if it does. That means your QC Usb drivers are not good. Seek help on youtube if this happens as this error is not gonnalet us flashing the firmware.
6) Open the UMT tool and choose the flasher option on top. Next make sure its on Single program mode. Below that you have to provide patch file and Xml file. You can do that by going into firmware folder which you've downloaded. It'll automatically detect the file format you just have to select it and then after all is done hit FLASH button.
It'll flash the software in sometime and your phone will reboot after that. But from my result it'll not have it's IMEI number anymore sony IMEI repair is not easy and you'll need to visit service centre maybe.
Here the firmware: - Firmware (https://www.mediafire.com/folder/6tpen9umgcou4/SONY_G2299_S000028_171102_2017-09-01)
Let know how it worked for you.

thank you so much!

Question Poco X3 Pro HardBrick Used Mi FLash Tool and get error sahara_rx_data:237

I tried a lot of things and i dont know what to do next ,but MI FLASH dose not need an autorized account but displays 2 erors:
First:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Second:
If someone knows how to solve it, please reply.

Try to rename your folders into short names. I think I had the same issue yesterday, after renaming it was fine.

IkarusVC said:
Try to rename your folders into short names. I think I had the same issue yesterday, after renaming it was fine.
Click to expand...
Click to collapse
No ,its not the problem.
It failed again after 90sec.

Antonio7489 said:
No ,its not the problem.
It failed again after 90sec.
Click to expand...
Click to collapse
Hi, Put the files inside C:\ not on your desktop and try

TempAccount10001 said:
Hi, Put the files inside C:\ not on your desktop and try
Click to expand...
Click to collapse
I get the same error after 90sec,its from somthing related to sahara_rx_data:237

try redownloading your rom, maybe it' corrupted. then flash again

icodix said:
try redownloading your rom, maybe it' corrupted. then flash again
Click to expand...
Click to collapse
Trust me i redownloaded the fastboot firmware around 3 Times ,its not about that.

Normally it shows the Device ID (it has 8 letters, like in Fastboot).
How do you connect your device on which OS.

SmartJuwel said:
Normally it shows the Device ID (it has 8 letters, like in Fastboot).
How do you connect your device on which OS.
Click to expand...
Click to collapse
This is if u don't have a driver

Antonio7489 said:
I get the same error after 90sec,its from somthing related to sahara_rx_data:237
Click to expand...
Click to collapse
Try getting latest mi flash tool

Its on EDL mode .. this is why no id only COM
I have a bricked one too, trying to solve it
In unloock tool :
it said snapdragon 855(sm8150) when reading the SoC
But the firmware only have firehose sm7150
Is this an issue? Or it already included in sm7150?
Need someone help to unbrick the phone
Tried multible firmwares with different versions
EFT pro, Unlocktool, Xiaome tool, pro all these tools and even Qifil
Is it from SoC? Because its auto EDL mode without test point
Help plz

SoJustMe said:
Its on EDL mode .. this is why no id only COM
I have a bricked one too, trying to solve it
In unloock tool :
it said snapdragon 855(sm8150) when reading the SoC
But the firmware only have firehose sm7150
Is this an issue? Or it already included in sm7150?
Need someone help to unbrick the phone
Tried multible firmwares with different versions
EFT pro, Unlocktool, Xiaome tool, pro all these tools and even Qifil
Is it from SoC? Because its auto EDL mode without test point
Help plz
Click to expand...
Click to collapse
Friend it's nothing to be done , send it to an authorized Xiaomi repair center and claim warranty while you have it.The phone can't exit edl mode without access codes, I repaired mine at a repair center authorized by Xiaomi , they replaced the motherboard (it taked around week) and then they send it back quickly.Trust me it's the only safe way(if you didn't open the back of the phone,then there is no warranty to be claimed) , you just need to tell them that the phone freezed,turned itself off and is not responding to power button,if you can drain it's battery so nothing is to be seen(any possible logs),good luck with repairing the phone.