Database Info

[GUIDE] Fixing hard bricks [Qualcomm HS-USB QDLoader 9008]

Fixing dead L70+ devices​
EVERYTHING IN THIS GUIDE IS DANGEROUS AND CAN COMPLETELY DESTROY YOUR DEVICE IF DONE INCORRECTLY. YOU HAVE BEEN WARNED
PLEASE READ EVERYTHING​
DO NOT DO THIS IF IT'S ONLY A SOFT BRICK!!!
By following this guide you agree that I TAKE NO RESPONSIBILITY FOR BRICKED OR DAMAGED DEVICES.
You and only you decided to follow these instructions.
Click to expand...
Click to collapse
What is a dead (hard bricked) device?
A dead or "hard" bricked device is a device that has been bricked beyond repair. Usually a corrupted boot partition failing to load the kernel or any type of recovery menu in order to restore. Motherboard swap is most commonly done in order to fix such device. Some devices such as our own have "leaked" service packages that can be used to restore a hard bricked device. Beware that this is not a 100% guarantee. It might or might not work.
Click to expand...
Click to collapse
How do I know if my device is hard bricked?
It would fail to boot and enter recovery/download mode. When connected to a PC and powered on Windows will detect it as Qualcomm HS-USB QDLoader 9008.
Instructions​
Download and install drivers from here
Download BoardDiag v2.99a from here
Download TOT files from here
Unpack all archives in a new folder in the root of your C: drive. Everything including the tot file.
Remove the batter from the device
Plug the device in to the PC via the USB cable.
Place battery back
Open BoardDiag and set it up as such:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AP Chipset: W3 W5 (ms8610)
Com Port: Get port num from device manager.
Target Dir: The new folder you created in the root of C:
BIN: Select .tot file
DIR: The new folder you created in the root of C:
Click to expand...
Click to collapse
Click on the EXTRACT button and wait until it finishes.
Make sure there are ticks on AP Check and EMMC Test !
Press START and wait until the program finishes.
When done it's safe to disconnect the phone from the PC.
Pull the battery out and place it back in and try to enter Download mode. If successful you should be able to flash KDZ following this guide.
Translated and re-formatted. Original guide by @kossrap @ 4pda.
Happy flashing!

Reserved

Reserved 2

Great to have new tools with Qualcomm chipsets

The BoardDiag have no "msm8916"

hi, I tried this guide, but I could not get my lg d290n, ap test ok, EMMC ..test failed test, dsram okay, where am I wrong? someone can help me because I'm not very good?

marcello1977 said:
hi, I tried this guide, but I could not get my lg d290n, ap test ok, EMMC ..test failed test, dsram okay, where am I wrong? someone can help me because I'm not very good?
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/d290n/how-to/guide-reflashing-stock-rom-d290-d295-t3142456

I have this problem 3 months ago , but i dont found solution yet for my Samsung -SM-N910F , sorry for my bad english :/

Need help please. I can't find the COM Port of my device. It just says "QHSUSB_BULK" under other devices. Doesn't say the port number. Anyone can help?

How to flash for htc one m8 in hsush qdload 9998
Sent from my HP 7 VoiceTab using XDA Free mobile app

Please Help
This happened after I clicked the start button...
please help

im trying to fix two LG fino with this one.
both were successful but I am still unable to boot to download mode

s4h1k0 said:
im trying to fix two LG fino with this one.
both were successful but I am still unable to boot to download mode
Click to expand...
Click to collapse
If you can boot in system, you can enable developer settings, connect the phone to your pc and try "adb reboot edl"

sorry it seems that I missed some steps.
I still cant go to downlaod mode

s4h1k0 said:
sorry it seems that I missed some steps.
I still cant go to downlaod mode
Click to expand...
Click to collapse
I think you need to restore the files using restore boot img, check this guide http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359

Hi My phones Lg G Pad 10.1 LG-VK700 hard brick after me flashing rom wrong Can u help me How to fix it ? Thank for help
lamyean122gmail.com

dibowz said:
This happened after I clicked the start button...
please help
Click to expand...
Click to collapse
I'm having the same problem as yours, does anyone have a solution? thanks, need help

Is this compatible with lg l fino d290n? And if yes, why the TOT file to download has the name "LGD295V10eCIS.7z"?
Sorry for my English

Hello, this method and post files can be used for a LG L70 MS323 v10c Metro PCS, sorry for my English...

Can i use provided D295N .tot file on a D290G?

Help Huawei Y7 trt-lx3 Brick qualcomm

Marcos and I'm from Peru, excuse my English, unlock the bootloader and flashed twrp and the computer started to restart indefinitely, looking for a backup full twrp copy it in my sd card restore from twrp and restart the phone was left screen black with blue led light on, connect to pc and I get this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the mobile does not respond fastboot nor recovery, it's been almost 2 days that I try to recover via qualcomm qfil but I do not find anywhere "programmer patch" download the full rom (2.22gb) contains update.app and extracted via huawei extractor but I can not find the necessary files:
I was researching and I would like to know if it can be created based on my firmware to use qfile or some other program or method to reset my cell phone. Thanks for your help I will be aware of all help.:good::highfive:
I was researching and I would like to know if it can be created based on my firmware to use qfile or some other program or method to reset my cell phone. Thanks for your help I will be aware of all help.
P.S; My phone buys it on the internet and I have no guarantee. Please, I need all your knowledge.:victory::good::good:

nike1973 said:
Marcos and I'm from Peru, excuse my English, unlock the bootloader and flashed twrp and the computer started to restart indefinitely, looking for a backup full twrp copy it in my sd card restore from twrp and restart the phone was left screen black with blue led light on, connect to pc and I get this:
the mobile does not respond fastboot nor recovery, it's been almost 2 days that I try to recover via qualcomm qfil but I do not find anywhere "programmer patch" download the full rom (2.22gb) contains update.app and extracted via huawei extractor but I can not find the necessary files:
I was researching and I would like to know if it can be created based on my firmware to use qfile or some other program or method to reset my cell phone. Thanks for your help I will be aware of all help.:good::highfive:
I was researching and I would like to know if it can be created based on my firmware to use qfile or some other program or method to reset my cell phone. Thanks for your help I will be aware of all help.
P.S; My phone buys it on the internet and I have no guarantee. Please, I need all your knowledge.:victory::good::good:
Click to expand...
Click to collapse
Take a look in here : https://forum.xda-developers.com/general/general/twrp-huawei-y7-trt-lx1-trt-lx3-t3738002

raystef66 said:
Take a look in here : https://forum.xda-developers.com/general/general/twrp-huawei-y7-trt-lx1-trt-lx3-t3738002
Click to expand...
Click to collapse
thanks for your help but I can not enter the erecovery mode

Hello Marcos, I regret not having any solution but, do you still have the backup of this model?

hello, I have not found any solution
Ardavalar said:
Hello Marcos, I regret not having any solution but, do you still have the backup of this model?
Click to expand...
Click to collapse
hello, I have not found any solution since it does not detect anything, from here take the backup https://forum.xda-developers.com/general/general/twrp-huawei-y7-trt-lx1-trt-lx3-t373800. .. specify for huawei y7 trt lx3.

nike1973 said:
hello, I have not found any solution since it does not detect anything, from here take the backup https://forum.xda-developers.com/general/general/twrp-huawei-y7-trt-lx1-trt-lx3-t373800. .. specify for huawei y7 trt lx3.
Click to expand...
Click to collapse
Thank you very much, but I already tried this supposed backup of the TRT-LX3 and it was in a bootloop (unlike the version of the TRT-LX1 that strangely worked).

Ardavalar said:
Thank you very much, but I already tried this supposed backup of the TRT-LX3 and it was in a bootloop (unlike the version of the TRT-LX1 that strangely worked).
Click to expand...
Click to collapse
hi, in my case my computer is completely dead, does not enter fastboot mode or recovery mode only the pc recognizes qhsusbulk.Actualmente I can not find a solution.

Firmware For Sony Xperia R1 PLUS g2299

Hii
I'm searching for Sony Xperia R1 Plus G2299 firmware
with .mbn file and .xml file
My phone is hard bricked with light blinking when put on charging
It also detected by computer as Qulacomm hsb loader device
But I unable to find firmware with .mbn format
Another way it to flash with S1 TOOL
but it need firmware with APPSW, ELABEL, FSP .sin_set file and I've found nothing
So please If someone knows how to get it or how to unbrick my sony Xperia R1 plus G2299 mobile reply
Thank You

sbhawani051 said:
Hii
I'm searching for Sony Xperia R1 Plus G2299 firmware
with .mbn file and .xml file
My phone is hard bricked with light blinking when put on charging
It also detected by computer as Qulacomm hsb loader device
But I unable to find firmware with .mbn format
Another way it to flash with S1 TOOL
but it need firmware with APPSW, ELABEL, FSP .sin_set file and I've found nothing
So please If someone knows how to get it or how to unbrick my sony Xperia R1 plus G2299 mobile reply
Thank You
Click to expand...
Click to collapse
You found anything? why there is no ftf file for it bro?

Writu said:
You found anything? why there is no ftf file for it bro?
Click to expand...
Click to collapse
No nothing, I can't find it anywhere. Sony never released firmware for this model. But, I'm still hoping to get something

Writu said:
You found anything? why there is no ftf file for it bro?
Click to expand...
Click to collapse
Found a rom but without .mbn file attached the screenshot with all the files I got. Any idea how to use these files with out using UMT_Qcfire I cen't afford it.
Also I found website which may help " https://forum.gsmhosting.com/vbb/f9...us-g2299-hang-logo-done-2619023/#post14707534"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello, to all whoever watching the comment. I want to tell that I've completely revived my Sony Xperia R1 plus G299 model using the rom I found on the website. It's working perfectly. I used the UMT for flashing the firmware. If you guys want the Rom for G299 for flashing. Message me here or write a comment. I'll provide you with firmware.

can you please provide the firmware and steps. it would be a great help!

As_373 said:
can you please provide the firmware and steps. it would be a great help!
Click to expand...
Click to collapse
Sure, I'll provide you with firmware. But I have to give you warning before you do any steps of it
After Flashing the firmware my phone have lost it's IMEI number only its Wi-Fi and Bluetooth is working.
Also this method is just for Sony Xperia R1 Plus which is hardbricked means it doesn't turns , screen shows nothing when pressed button only shows red led blinking when charging cable is used.
Note: If you don't wanna to loose it's IMEI please don't use this method.
Requirements: - Ultimate Multi Tool software, Qualcomm USB Drivers & firmware.
Steps: -
1) Please install the UMT in your system/computer. You'll need to purchase it's usb as this software is not free or you can go nearest mobile repair shop as they do have this software generally or see if your friend have one.
2) Please install Qualcomm usb drivers.
3) If your phone is hardbricked this method works on it only. So open your phone back panel reach to it's motherboard.
4) Now after reaching find Sony G299 Edl points and short them but remove battery first. After shorting both edl points keep them shorted and insert the USB cable in phone and then in your computer. (You have to keep edl point shorted until you plugged the cable)
4) In your device manage you'll see the a usb COM port will be shows (It'll be like this Qualcomm HS-USB Qloader 9008 COM and some number).
5) It means your device is not connected in EDL mode if not try repeating the step above. If it worked make sure the device name shown in device is not showing any kind on error mark in device manager like this
if it does. That means your QC Usb drivers are not good. Seek help on youtube if this happens as this error is not gonnalet us flashing the firmware.
6) Open the UMT tool and choose the flasher option on top. Next make sure its on Single program mode. Below that you have to provide patch file and Xml file. You can do that by going into firmware folder which you've downloaded. It'll automatically detect the file format you just have to select it and then after all is done hit FLASH button.
It'll flash the software in sometime and your phone will reboot after that. But from my result it'll not have it's IMEI number anymore sony IMEI repair is not easy and you'll need to visit service centre maybe.
Here the firmware: - Firmware (https://www.mediafire.com/folder/6tpen9umgcou4/SONY_G2299_S000028_171102_2017-09-01)
Let know how it worked for you.

thank you so much!

Note 10 plus (sm-n975u) DEAD BOOT/ BRICKED what do i do?

somehow ended up with my phone showing only a black screen.
Cant get to download mode OR recovery mode, nothing shows up on the screen.
when I plug it into the computer it IS recognized as:
Qualcomm HS-USB QDLoader 9008
I have no idea what to do about this, I've tried everything i can think of.
Is there a QUALCOMM tool I should use? do I need a specific loader file? there's so little info online.
I would REALLY appreciate some guidance on this. ty!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

OK so I get it now, kind of.
I realize that I need the:
firehose file
Rawprogram0.xml
Patch0
...But how do I get these files

Snapple391 said:
OK so I get it now, kind of.
I realize that I need the:
firehose file
Rawprogram0.xml
Patch0
...But how do I get these files
Click to expand...
Click to collapse
I found a package on Romdevelopers.com and when i asked them if that was all i needed they pulled the file and shutdown the link for it! So im in the same boat.

Also need the files for sm-n976v if someone has them or knows how to get them please let us know. Or how to do dead boot repair / bootloader repiar/ exit qdloader mode / boot from sdcard / hard brick fix / fix 9008 port/ 9008 port only fix ... if possible on these newer devices.

@Snapple391 I find your files on romdevelopers for 100 usd ransom and few other places for 35 and 20 usd
Also one of the packages is for 975U/U1/W which is very interesting maybe it will work for other models as well.
What happened with your device?
Maybe the firehose exists outside of that package, are you OK to try few tools ? There is a high chance we can revive it !
@Snapple391 I sent you PM with what we can try.

I know this was a few weeks ago, but did anyone find anything. Anything would be much appreciated

20 bucks the files are on the usual places if you have a U7 in 9008 mode it is quite possible the available files will revive the device
Do you have 20 ?

Question Poco X3 Pro HardBrick Used Mi FLash Tool and get error sahara_rx_data:237

I tried a lot of things and i dont know what to do next ,but MI FLASH dose not need an autorized account but displays 2 erors:
First:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Second:
If someone knows how to solve it, please reply.

Try to rename your folders into short names. I think I had the same issue yesterday, after renaming it was fine.

IkarusVC said:
Try to rename your folders into short names. I think I had the same issue yesterday, after renaming it was fine.
Click to expand...
Click to collapse
No ,its not the problem.
It failed again after 90sec.

Antonio7489 said:
No ,its not the problem.
It failed again after 90sec.
Click to expand...
Click to collapse
Hi, Put the files inside C:\ not on your desktop and try

TempAccount10001 said:
Hi, Put the files inside C:\ not on your desktop and try
Click to expand...
Click to collapse
I get the same error after 90sec,its from somthing related to sahara_rx_data:237

try redownloading your rom, maybe it' corrupted. then flash again

icodix said:
try redownloading your rom, maybe it' corrupted. then flash again
Click to expand...
Click to collapse
Trust me i redownloaded the fastboot firmware around 3 Times ,its not about that.

Normally it shows the Device ID (it has 8 letters, like in Fastboot).
How do you connect your device on which OS.

SmartJuwel said:
Normally it shows the Device ID (it has 8 letters, like in Fastboot).
How do you connect your device on which OS.
Click to expand...
Click to collapse
This is if u don't have a driver

Antonio7489 said:
I get the same error after 90sec,its from somthing related to sahara_rx_data:237
Click to expand...
Click to collapse
Try getting latest mi flash tool

Its on EDL mode .. this is why no id only COM
I have a bricked one too, trying to solve it
In unloock tool :
it said snapdragon 855(sm8150) when reading the SoC
But the firmware only have firehose sm7150
Is this an issue? Or it already included in sm7150?
Need someone help to unbrick the phone
Tried multible firmwares with different versions
EFT pro, Unlocktool, Xiaome tool, pro all these tools and even Qifil
Is it from SoC? Because its auto EDL mode without test point
Help plz

SoJustMe said:
Its on EDL mode .. this is why no id only COM
I have a bricked one too, trying to solve it
In unloock tool :
it said snapdragon 855(sm8150) when reading the SoC
But the firmware only have firehose sm7150
Is this an issue? Or it already included in sm7150?
Need someone help to unbrick the phone
Tried multible firmwares with different versions
EFT pro, Unlocktool, Xiaome tool, pro all these tools and even Qifil
Is it from SoC? Because its auto EDL mode without test point
Help plz
Click to expand...
Click to collapse
Friend it's nothing to be done , send it to an authorized Xiaomi repair center and claim warranty while you have it.The phone can't exit edl mode without access codes, I repaired mine at a repair center authorized by Xiaomi , they replaced the motherboard (it taked around week) and then they send it back quickly.Trust me it's the only safe way(if you didn't open the back of the phone,then there is no warranty to be claimed) , you just need to tell them that the phone freezed,turned itself off and is not responding to power button,if you can drain it's battery so nothing is to be seen(any possible logs),good luck with repairing the phone.