WARNING
This will void your warranty, so do at your own RISK
Requirements:
- USB driver
- Odin 3.07
- Root file UPDATE-SuperSU-v1.34.zip
- Recovery CWM
Install Clockworkmod Recovery and root
- Install USB driver
- Connect your phone as MTP and copy on Phone memory the UPDATE-SuperSU-v1.34.zip file ( without unzip it)
- Remove your phone
- Extract file recovery.tar.md5 from Recovery CWM in your desktop
- Turn off your S7580
- Press and hold Volume DOWN + Home + Power until you can read a Warning screen and press Volume UP to continue
- Connect your phone to pc and wait for driver installing...
- Open Odin 3.07 and the ID:COM should turn blue
- Untick Auto Reboot and F. Reset Time
- Click on PDA and select file recovery.tar.md5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Press Start button
- When you read PASS! unplug the usb cable
- Press and hold Volume UP + Home + Power until screen turn off
- Release only Power button and you are on CWM Recovery...
- Select (use Volume up/down and select with Power button) install zip -> choose zip from internal sdcard-> 0/
- Select the Root zip and Yes - Install ..
- After all is done select reboot system now
That's all
Press and hold Home + Volume UP + Power buttons for 5s to boot into cwm recovery mode.
Troubleshooting
If you boot in stock recovery, after flashing CWM Recovery, you have to:
- download Root Browser from Play Store
- rename file install-recover.sh to install-recovery.sh.bak in /system/etc folder of your phone
I suggest using this CWM recovery to root your phone ONLY. This version is not fully compatible with Android 4.2.2
djcliccone said:
- Extract file recovery.tar.md5 from Recovery CWM in your desktop
Click to expand...
Click to collapse
the file is corrupted, please download and check the file after you've uploaded it.
ciribic said:
the file is corrupted, please download and check the file after you've uploaded it.
Click to expand...
Click to collapse
This zip would not extract the file.
HenryStar said:
This zip would not extract the file.
Click to expand...
Click to collapse
Fixed
djcliccone said:
Fixed
Click to expand...
Click to collapse
It worked! Thanks!
The root file that you linked, I flash the phone with the original frimware and push the root file from the custom recovery. But it have no root acces.
cwm couldn't mount /sdcard/, but it did mount ext sdcard. Got superuser, but root still doesn't work, please help.
ciribic said:
cwm couldn't mount /sdcard/, but it did mount ext sdcard. Got root and superuser, thanks again.
Click to expand...
Click to collapse
You got root? I never goot root on my phone.
HenryStar said:
You got root? I never goot root on my phone.
Click to expand...
Click to collapse
I spoke too soon, my bad.
HenryStar said:
You got root? I never goot root on my phone.
Click to expand...
Click to collapse
Please, try to flash this root file UPDATE-SuperSU-v1.34.zip. If it works, i add it on my first post
djcliccone said:
Please, try to flash this root file UPDATE-SuperSU-v1.34.zip. If it works, i add it on my first post
Click to expand...
Click to collapse
This root worked! Now I have root access with this file.
HenryStar said:
This root worked! Now I have root access with this file.
Click to expand...
Click to collapse
Good :victory: I update my first post
djcliccone said:
Please, try to flash this root file UPDATE-SuperSU-v1.34.zip. If it works, i add it on my first post
Click to expand...
Click to collapse
It works, thanks.
After successful root i tried to do a factory reset, but the phone is stuck in clearing data and won't boot again. My guess is this cwm is not fully compatible with s7580, but I'm noob... (my phone was on stock firmware, and all i did to it was this tutorial)
ciribic said:
After successful root i tried to do a factory reset, but the phone is stuck in clearing data and won't boot again. My guess is this cwm is not fully compatible with s7580, but I'm noob... (my phone was on stock firmware, and all i did to it was this tutorial)
Click to expand...
Click to collapse
Well it worked for. It was pretty slow but I could clearing off data in cwm.
ciribic said:
After successful root i tried to do a factory reset, but the phone is stuck in clearing data and won't boot again. My guess is this cwm is not fully compatible with s7580, but I'm noob... (my phone was on stock firmware, and all i did to it was this tutorial)
Click to expand...
Click to collapse
You have a different partitions table. I think you have a different version of s7580 (GT-S7580E or GT-S7580L (Remove the battery from your phone, and the model is printed on the white label inside) or a different rom. Please digit *#1234# and tell me AP/CP/CSC version
Now we wait so we can flash an custom rom on this phone!
ciribic said:
After successful root i tried to do a factory reset, but the phone is stuck in clearing data and won't boot again. My guess is this cwm is not fully compatible with s7580, but I'm noob... (my phone was on stock firmware, and all i did to it was this tutorial)
Click to expand...
Click to collapse
Anyway this is stock recovery to flash in ODIN
djcliccone said:
You have a different partitions table. I think you have a different version of s7580 (GT-S7580E or GT-S7580L (Remove the battery from your phone, and the model is printed on the white label inside) or a different rom. Please digit *#1234# and tell me AP/CP/CSC version
Click to expand...
Click to collapse
nope, it's gt-s7580, i can't do noanything now, because it won't boot. I can enter download mode, so i think i'll try to flash stock firmware.
If i remember correctly pda and csc were smth like this S7580XXUAMK6 S7580OXXAMK2
ciribic said:
nope, it's gt-s7580, i can't do noanything now, because it won't boot. I can enter download mode, so i think i'll try to flash stock firmware.
If i remember correctly pda and csc were smth like this S7580XXUAMK6 S7580OXXAMK2
Click to expand...
Click to collapse
My recovery is from S7580XXUAML1_S7580OMNAML1_OMN . I think you can flash this rom
Related
This is a custom recovery based on Amon RA's recovery (NexusOne) source.
This recovery is for the HTC DESIRE :
Features
full ADB access in recovery mode
Busybox v1.15.3
Optical TrackBall navigation ( Volume-key to go back) option
Menu :
Reboot system now :: reboot your phone
USB-MS Toggle :: enable/disable USB mass storage (use when the phone is connected to your PC)
Backup/Restore
Flash zip from sdcard :: Flash a zip update file from your sdcard
Wipe
Partition sdcard
Other
Power off :: Powers off your phone
Special Thanks To:
AmonRa -> for recovery
Pual -> Root of Desire
And Many Many Many Others
Way to use it: ->
1. Turn Off Device
2. Hold Volume Down Button + Powerbutton -> u wil reach Hboot (White Screen)
3. Use Volume Down To Move On Recovery Then Use Power Button To Select -> Now u see Black Screen With Red Triangle.
4. Connect Your Phone To Desktop/Laptop.
5. Both In Recovery Mode Using ->
For Windows users -> To Enter Recovery
Code:
Extract Above Given .zip to Desktop
For Xp user -> Run recovery-windows.bat
For Vista & Windows 7 -. Run recovery-windows.bat [B]AS ADMINISTRATOR [/B]
For Linus Users -> To Enter Recovery
Code:
Extract Above given .zip to home
Open terminal from extracted Folder Using Right Click
Now Type:
sudo ./recovery-linux.sh
Enter Su password
rest tut is given in roms (atleast my roms) -> http://forum.xda-developers.com/showpost.php?p=6626137&postcount=2
If ABOVE STEPs for recovery Doesnot work, try these steps shawe_ewahs
Download:
Desire Fake-Flash Recovery:
Click Here to Download
-> Thx to INXTUX
Previous Versions
Download V1
Multiupload
Mirror Thx PsYDoX
FOR v1.1 (I M NOT USING THIS PERSONALLY)
View attachment AMDRv1.1.zip
People Please replace -> ALL CONTENT with files in recovery folder of V1
Thank you -> ieftm
Recovery Runs even After u remove usb cable
IF FACING PROBLEM WITH THIS RECOVERY
post it below or u will find Link's in my signature to contact me. ENJOY!!
If ABOVE STEPs Doesnot work try these steps shawe_ewahs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great; will give it a shot
/Martin
Very Nice Work my friend...
I Wait for a Froyo port, then i will root my Phone, i dont want a usb brick -.-"
So what benefit does this recovery menu bring?
So, basically, the difference between this recovery and Paul's recovery is that the recovery does not depend on a computer to work, only to launch the recovery?
Zappza said:
So, basically, the difference between this recovery and Paul's recovery is that the recovery does not depend on a computer to work, only to launch the recovery?
Click to expand...
Click to collapse
it still depends on system -> but pauls recovery didnot wipe ext partitions
You need to push the files over ADB same as bevor (paul)
this recovery is only fixed, usb toggle and wiping fully works....
follow him on twitter, he write down anything xD
?
brilliant work of course - thank you
i have to ask, do you think the usb failing issue some have have experienced is a problem? specifically using the mass storage toggle in this recovery.
i am so eager to root but worried about the usb brick issue ??
terminal 7 said:
brilliant work of course - thank you
i have to ask, do you think the usb failing issue some have have experienced is a problem? specifically using the mass storage toggle in this recovery.
i am so eager to root but worried about the usb brick issue ??
Click to expand...
Click to collapse
i flash abt 15 to 30 roms per day this is minimum and many time it doesnot boot
i have not faced this issue till now
if i come across it and i find solution i will surely share it
Looks like it's working great on my Desire with Windows 7 X64!
Can't wait for Froyo!
ahmgsk said:
it still depends on system -> but pauls recovery didnot wipe ext partitions
Click to expand...
Click to collapse
That explains why I needed to partition my SD card to avoid boot loops!
can I flash it the regular way? As in, flash zip?
Thank you!
H00pyFr00d said:
That explains why I needed to partition my SD card to avoid boot loops!
Click to expand...
Click to collapse
when u used roms with a2sd (applications to sd card) u need to partition ur sdcard
when u used b4 recovery -> it never wiped ext partition
u had to break partition and remake it while flashing
but that prob is no more -> u can wipe ext with this recovery
Twister360 said:
can I flash it the regular way? As in, flash zip?
Thank you!
Click to expand...
Click to collapse
its not for flashing u hav run it via pc same as b4
great work, been reading the updates on twitter all last night and this morning
Aha, I see!
Can somebody please uploade a mirror, Rapidshare is talking dirty to me
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.
Click to expand...
Click to collapse
I don't get it
Will we be able to flash custom ROMs without connection to computer?
RustyJoe said:
Will we be able to flash custom ROMs without connection to computer?
Click to expand...
Click to collapse
try reading the post
"The purpose of this recovery is to avoid using adb by accessing all features directly from the menu."
newcastlepunto said:
try reading the post
"The purpose of this recovery is to avoid using adb by accessing all features directly from the menu."
Click to expand...
Click to collapse
That doesn't clearly answer his question.
The simple answer is NO. You still need to connect to the computer.
Dear Gentlemen,
I'm trying to install 'RazoDroiD v4.0' ROM in my rooted phone, and right now i got stuck in the main screen (samsung) since 20min.
I read carefully the tutorial [GUIDE/HOW-TO] Beginner's "Getting Started" Guide...
And i followed the steps mentioned in it, i got a slight problem in the step " 8.Now that you have wiped all data, select “install zip from sd” from the main recovery menu, then “choose zip from sdcard”.
And i rebooted the phone on normal mode, accessed the SD card, changed the ROM's file name into update.zip (since i can not see that "install zip from sd" )
Rebooted the phone in recovery mode, and installed that update.zip, and it worked installed and it said welcome to "RazoDroiD 4.0", and stuck on reboot main screen (samsung).
Could anyone help me please??!
Thanks in advance
iheb003 said:
Dear Gentlemen,
I'm trying to install 'RazoDroiD v4.0' ROM in my rooted phone, and right now i got stuck in the main screen (samsung) since 20min.
I read carefully the tutorial [GUIDE/HOW-TO] Beginner's "Getting Started" Guide...
And i followed the steps mentioned in it, i got a slight problem in the step " 8.Now that you have wiped all data, select “install zip from sd” from the main recovery menu, then “choose zip from sdcard”.
And i rebooted the phone on normal mode, accessed the SD card, changed the ROM's file name into update.zip (since i can not see that "install zip from sd" )
Rebooted the phone in recovery mode, and installed that update.zip, and it worked installed and it said welcome to "RazoDroiD 4.0", and stuck on reboot main screen (samsung).
Could anyone help me please??!
Thanks in advance
Click to expand...
Click to collapse
u did that step wrong ......u must choose "install zip from SD" not "update from SD"...look carefully there should be an option to choose d zip file from SD card ...
Suranjan16049 said:
u did that step wrong ......u must choose "install zip from SD" not "update from SD"...look carefully there should be an option to choose d zip file from SD card ...
Click to expand...
Click to collapse
Thank your for your quick answer, but what i have in my phone right now is:
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
that's all!
could you help me through this?!
even odin is refusing to connect! it says no phone connected!
Try to wipe data, reset and cash, before and after installation and then reboot.
ZmisiS said:
Try to wipe data, reset and cash, before and after installation and then reboot.
Click to expand...
Click to collapse
I did my friend, but no news, nothing happened, im still stuck at the samsung screen for a long time!
im thinking is there any possibility to Install the ROM from computer?!
You do partition the SD Card and install it again. Before that all you want to save from the SD Card, you copy somewhere on your computer, USB or DVD. I think on music, pictures, videos, etc.
Did you use this Clockworkmod Recovery?
http://forum.xda-developers.com/showthread.php?t=1339640
i know you have read the guide but be sure that your recovery looks this -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and NOT like this-
or check the rom size again..maybe you didn't download it completely!
ZmisiS said:
You do partition the SD Card and install it again. Before that all you want to save from the SD Card, you copy somewhere on your computer, USB or DVD. I think on music, pictures, videos, etc.
Click to expand...
Click to collapse
Thanks i will try to do it now, and ill keep you updated.
ouch! my screen does not look like that! dont know what should i do!
iheb003 said:
ouch! my screen does not look like that! dont know what should i do!
Click to expand...
Click to collapse
Download this Clockworkmod Recovery and install it with Odin.
http://forum.xda-developers.com/showthread.php?t=1339640
ZmisiS said:
Download this Clockworkmod Recovery and install it with Odin.
http://forum.xda-developers.com/showthread.php?t=1339640
Click to expand...
Click to collapse
Thanks you! will do as soon as i solve the odin driver solution, it says no phones connected, and i reinstalled again and again the driver! :crying:
iheb003 said:
Thanks you! will do as soon as i solve the odin driver solution, it says no phones connected, and i reinstalled again and again the driver! :crying:
Click to expand...
Click to collapse
Are u sure that ur phone is on the download mode ?
Sent from my GT-S5670 using xda premium
hey using your menu + power + volume down buttons go in download mode .you will be able to se a android (yellow) with a shovel that's download mode.connect your mobile to pc with USB .open Odin you will now see a yellow box indicating that
your phone is connected.now flash clockworkmod
Sent from my GT-S5670 using xda premium
u have to boot ur phone in downloading mode in order to get ur phone connected....
thank you all! i got the odin working back again!
now place for the stock rom, the one i got is the beni_cwm-5_ext4_v2 (a .tar file), and there was a problem with it :
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<0> Destroy instant..
<0> Killed timer
anyway, i went to sammobile for a original, i opened one account, searched for the mobile, and got the link to the firmware, but it is a .RAR file?!!
odin only works with tar md5 and smd files! any help?
can i use a custom rom? or will the rar work?
Gentlemen,
Thats what im having after Odin id his work:
[/url][/IMG]
and the phone shows nothing, the screen is on, even the small Android in construction is gone!
Can anyone help me please?!
Can you post another screenshot?
Can't make out anything...
- Via xda premium
a.cid said:
Can you post another screenshot?
Can't make out anything...
- Via xda premium
Click to expand...
Click to collapse
Have a look at this:
Where do I start for this.?
1. You obviously haven't followed the guide to the letter...
2. You flashed a rom using stock recovery
3. You are currently using Tass.ops which is for galaxy mini and not for fit...for fit, you need beni.ops which is a different file and not a simple rename...
What do you need to do:
1. Take a deep breath and relax...try and calm down...
2. READ THE FULL GUIDE ATLEAST ONCE
3. If you have doubts, ASK here BEFORE proceeding...
4. Clear everything up, double-check and cross-check each and everything...
5. Proceed...
- Via xda premium
a.cid said:
Where do I start for this.?
1. You obviously haven't followed the guide to the letter...
2. You flashed a rom using stock recovery
3. You are currently using Tass.ops which is for galaxy mini and not for fit...for fit, you need beni.ops which is a different file and not a simple rename...
What do you need to do:
1. Take a deep breath and relax...try and calm down...
2. READ THE FULL GUIDE ATLEAST ONCE
3. If you have doubts, ASK here BEFORE proceeding...
4. Clear everything up, double-check and cross-check each and everything...
5. Proceed...
- Via xda premium
Click to expand...
Click to collapse
will do keep u updated!
Hey Guys,
Many People are confused how to install CM 12.1 (lollipop) ROM on our device.
So, here's a brief Guide.
Part 1: Installing Recovery
1. Download TWRP Recovery From the Link: https://www.androidfilehost.com/?fid=24407100847293110
2. Download ODIN From this link. http://odindownload.com/download/Odin3_v3.10.7.zip
3. Install Samsung USB Drivers. http://androidhost.org/XIVsA
4. Extract Odin and run odin.exe on your pc.
5. Shut Down your Phone and Press Volume down + power button + home button simultaneously.
6. Press Continue.
7. Open Odin on your pc and select AP and browse to the recovery file you downloaded.
8. It shows port no in ID:COM section. Dont touch any other thing and press start.
9. Now, Your Phone will automatically rebooted.
Part 2 : Installing ROM
10. Download these stuff and copy them to ur microsd card.
CM 12.1 - 6 March Update - https://www.androidfilehost.com/?fid=24438995911971793
GAPPS (For Play Store) - https://www.androidfilehost.com/?w=files&flid=31528
11. Shut Down your Phone and press Volume Up + Power + Home at same time.
12. TWRP Recovery will now open.
Note:When entering TWRP Recovery, it will ask you if you want to keep system partition Read only, check the box "Never show this screen during boot again" and swipe the lock bar, else you can't modify system partition in TWRP like install ROM, root...
13. Select Wipe and wipe cache, dalvik cache, system, internal storage,data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
14. Select Install and select the rom file and install it. (it may take some time)
15. Now Select Install again and select gapps zip and reboot system and you are all done.
Hit Thanks if this is useful for you.
Leave your FeedBack
use same procedure for flashing cm11 as well but obviously download cm11 rom and gapps for android 4.4.4
Thank you
i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?
did it get completed on odin? Try changing usb cable and usb port
Will it work with cwm
And also is it necessary to download (gapps)
Does it have to be stock frimware so the rom could be installed?
Thank's DEV @SandPox for this nice ROM and for the effort to do for all bugs.
__________ OFFICCIAL _________
http://forum.cyanogenmod.org/topic/...galaxy-trend-plus-s-duos-2-gt-s7580-gt-s7582/
please help
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap
How to fix deadlock or headset problem...
Experimental kernel
https://www.androidfilehost.com/?fid=24269982087004359
Code:
Note for who don't know how to upgrade kernel:
This zip file are not supposed to be flash in recovery
extract it 1 time, you'll get modules/ and kernel.tar
kernel.tar flash by odin or extract it to get boot.img and flash it by any method you want
modules/* copy to /system/lib/modules/, old file must be delete and copy new file to there (remember to backup old modules)
this kernel are supposed to not have any deadlock or headset problem, report to me if anything gone wrong
remember to backup your old kernel
know problem: incall make phone crash, will fix later
damn.. i forgot to fix RIL for s7582, RIL will not work for s7582
surprise: I just know how to fix dialer lag, our phone kernel set the limit to 60fps maximum frame rate, I tried to increase it to 70fps and dialer lag is gone xD
Credits:
Sandpox
Its not installing . I tried it . Showing an error but gaaps is working.
rahulhanda20 said:
Will it work with cwm
And also is it necessary to download (gapps)
Click to expand...
Click to collapse
Try CWM..
Gapps is for play store and framework
munthir said:
Does it have to be stock frimware so the rom could be installed?
Click to expand...
Click to collapse
Not necessary but recomended
alay shah said:
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap
Click to expand...
Click to collapse
i think u have selected read only whenu opened twrp first time...
Install TWRP again and uncheck read only check on dont ask again and continue...and it will work
Light Hope said:
Its not installing . I tried it . Showing an error but gaaps is working.
Click to expand...
Click to collapse
What Error u got
Mohned said:
i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?
Click to expand...
Click to collapse
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:
tried that solution but still it shows same error... e unable to mount system
For this do we need to be on CM 11 ????
Light Hope said:
For this do we need to be on CM 11 ????
Click to expand...
Click to collapse
It doesnt matter whether u are on cm11 or stock unless u wipe everything (except external sd) before install
abbi339 said:
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:
Click to expand...
Click to collapse
Thanks alot for replying me^^ .. i'll try this and tell you the results later ..oh and sorry for my bad English
Wow!
It works, no problem.
Can u please tell me how could I root now?
Last time I use I-root but, now its not working.
Give me a instruction please.
IM NOT RESPONSIBLE IF YOU BRICK YOUR TAB OR DECIDE TO BE CARELESS OR CREATE A CYCLONE... you know the drill.
HOW TO ROOT SM-T116 TAB 3 LITE 7.0 3G VOYAGE-XX ( Galaxy Tab 3 Lite VE (3G) (SM-T116 ))
After searching for over a month on how to root/install twrp all i cound find were instructions for the SM-T110/1...
if thread already exists pls notify
N.B I TAKE NO CREDIT FOR THIS RECOVERY IN ANYWAY
I am writting to help fellow SM-T116 owners... Since ive been searching for a long time.... I believe there isnt a guide to root this Tab yet.
- N.B MAKE SURE you device's code name is goyave or goyave3g
1. Download the twrp recovery here
- download the recovery in .tar format...
- you will upgrade to v3 manually.
2. Download Odin v3.10.* here
-> copy them to a place you know on ur pc such as Desktop
3. Boot your Tab 3 lite to download mode by: pressing "power + home + vol down"
-> believing all your drivers are installed correctly
3.1 open Odin*.exe ,
3.2 connect your tab and press volume up...
-> at this stage Odin should recognise your device
on the ID:COM section like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. UNTICK AUTO REBOOT or you wont be able to enter recovery
5. Tap pn AP and go to the recovery you downloaded.
select it
6. Press on Start to begin the flashing process
-> After Odin flashes the recovery it will tell you PASS!
7
7.1. Preas and hold POWER + VOLUME DOWN
7.2. when the screen goes black change and hold HOME + VOLUME UP
Now you will enter TWRP... stage 1 done.
rooting on post #2:good:
Now TWRP is functional... Time to root.
1. Download Chainfire's SuperSu flashable zip here
-> and thanking is not a crime.
2. Reboot to recovery...
ALLOW TWRP TO MODIFY THE SYSTEM PARTITION
3.1. Select install
3.2. navigate to your supersu zip
/sdcard/* or /extsdcard/*
-> when you are at the folder where your zip is it will be on the dialog on the right.
4.1. select it
4.2. swipe to confirm
4.3. select wipe cache/dalvik and reboot...
Now you have a Custom Recovery and you are rooted... Doors open.
Becarefull to not to open the wrong doors
THE PEOPLE WHO MADE THIS POSSIBLE
CREDIT GOES TO:
BIG THANKS TO TeamWin - TWRP FOR THE AWESOME RECOVERY AND
CHAINFIRE for the awesome supersu
SAMSUNG FOR Odin and Demostration Image
THATS IT...!!!!!!!!!!!!!!!!!!!!!!!!!!
will upload deodexed and zipalign rom soon.
Very nice !
:laugh::laugh::laugh:
This works for 116NY too xD
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
I am new with Android. Please, can you describe step by step process
peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
Which part fails bro cause a more detailed procedure is a video right
diana-TF said:
I am new with Android. Please, can you describe step by step process
Click to expand...
Click to collapse
Ill add numbering then...
I wrote every step 1 by 1.
U r probably comfused cause there aren't any numbering as to what to do first.
hi...Replies to Android 4.4.4؟؟؟؟؟
h.azara said:
hi...Replies to Android 4.4.4؟؟؟؟؟
Click to expand...
Click to collapse
Whatsup
Can you please post a link for custom rom
Ponie123 said:
Can you please post a link for custom rom
Click to expand...
Click to collapse
Custom Rom like??
nhlalukoG said:
Custom Rom like??
Click to expand...
Click to collapse
Like CYANOGEN or Pac man
Lol they r built bro...
N i guess no one has built it...
peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
i will help you,
1: install kingoroot on your pc
2:Enable USB debugging
3:connect your phone to pc wait for processing
4:when 99% your phone automatically restarted, do not put off the usb cable when it complete
5:hope your phone will b e rooted
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Adebayo0437 said:
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Click to expand...
Click to collapse
Hahaha not possible... the update.zip need to be signed by Samsung specifically...
Unless you get a modified stock recovery which needs to be flashed via Odin...
Ok
Rushaan n said:
Ok
Click to expand...
Click to collapse
Does it have "oem unlock" on developer settings??
nhlalukoG said:
Does it have "oem unlock" on developer settings??
Click to expand...
Click to collapse
Deleted
]Hi, Guys, looking for update to Eui Marshmallow 5.8 17s, but unable to do so because of custom rom, root, unlocked bootloader & also don,t want all that hassle to go back to stock rom, recovery etc, just want regular twrp flash, then here we go,
Requrements:
1. Eui 5.8 17s Stock Rom
Link: http://forum.le.com/in/eui_detail.html?euiid=208#
2. Twrp 3.0 & above ( Considering u unlocked bootloader, Rooted, Twrp Installed)
Link: http://bit.ly/2dhyzSQ
3. updater-script
Link: http://bit.ly/2crl1hs
Good practice: Always Backup ur Full Rom in Twrp
Preparing Zip:
1. Now Double click on Downloaded zip & open it, Do not extract
2. Go META-INF/com/google/android
3. Add downloaded Updater-script with winzip option at left top corner, it will replace ur existing script file.
4. Copy Zip file to internal storage
Thats it, ready for flash
Twrp Flashing:
1. boot into recovery using system update menu
2. Wipe everything except internal storage ( or u can also wipe that too)
i kept it because of all data, so it doesnt matter or also u can upgrade on existing rom without wiping anything,
no matter what it will work
3. flash zip, be patient, its big rom, it will take time
4. After Finish, wipe cache / dalvik, reboot, Twrp will show No os installed, ignore it & reboot
5. After reboot, may be or may be not u will find Orange Status, that ur bootloader is unlocked, device canot be trusted, Dont scare, it will reboot.
6. If booting takes lot of time then switch off device by keep pressing power button for 10sec
7. reboot again rom will start optimizing apps
& There u go UR in EUI 5.8 17S Marshmallow
-----------------------------------------------------------------------------------------------------------------------------------------------------
Recommendation: Better Do clean install with all wipes
-----------------------------------------------------------------------------------------------------------------------------------------------------
Thanks
For any queries, pls comment,
Happy to help u Always...
i have done the eui 5.8/MM update from lollipop version in le1s eco..the lockscreen notification is not working anymore for me..also saved wifi do not auto connect when in range...anybody facing this ? then MM update for le eco has bugs..any fix??
avishek83 said:
i have done the eui 5.8/MM update from lollipop version in le1s eco..the lockscreen notification is not working anymore for me..also saved wifi do not auto connect when in range...anybody facing this ? then MM update for le eco has bugs..any fix??
Click to expand...
Click to collapse
There are no known such bugs as u mentioned
Reset & ur good to go
My recommendation was clean install
transistor_101 said:
There are no known such bugs as u mentioned
Reset & ur good to go
My recommendation was clean install
Click to expand...
Click to collapse
Ive done the update through stock recovery...not twrp method..what do u mean by reset..?
avishek83 said:
Ive done the update through stock recovery...not twrp method..what do u mean by reset..?
Click to expand...
Click to collapse
Factory restore, even leforum recommend to do so after update, back up data n restore.
It didn't worked for me
hello there i tried the method step by step but it didn't worked for me . even i can't flash the file . I got this error while flashing "Error executing updater binary in zip"
help me
mkmks211 said:
hello there i tried the method step by step but it didn't worked for me . even i can't flash the file . I got this error while flashing "Error executing updater binary in zip"
help me
Click to expand...
Click to collapse
Are u sure that u replaced updater-script properly.
Better extraxt full rom n replace script file, zip it again n then try flashing
Hope this will work
Let me try
okay let me try this
---------- Post added at 11:41 AM ---------- Previous post was at 11:06 AM ----------
thanks man it worked for me . you made my day , keep doing :good:
can anyone give me stock recovery for marshmallow update..or lollipop if they didnt uodate the recovery
Ztsanga said:
can anyone give me stock recovery for marshmallow update..or lollipop if they didnt uodate the recovery
Click to expand...
Click to collapse
Why you need stock recovery? when u can flash right from twrp, using given script for both chinese & indian 17s Rom
transistor_101 said:
Why you need stock recovery? when u can flash right from twrp, using given script for both chinese & indian 17s Rom
Click to expand...
Click to collapse
because im selling my phone and i need to put everthing as it is
how to change the update script as .zip file is not opening
plz help
mr.shadow said:
how to change the update script as .zip file is not opening
plz help
Click to expand...
Click to collapse
U need to open rom zip file, not script file as zip, double click on zip file it will open, then replace updater script,better use second method for replacing script file.
Bricked!
Hi guys, I tried updated to 17s witout updating TWRP, now it appears that I have bricked my x500. I can't boot into recovery, and my computer isn't detecting my phone, I just get a red charge light. I've looked through the thread about scatter files and so on but can't get my head aound how to use the SP tool, its not working for me anyway. Can anyone link an easy to follow step by step guide or help? It looks like there is a solution but I can't figure it out. Any help would be really, really appreciated!!:
oodles1916 said:
Hi guys, I tried updated to 17s witout updating TWRP, now it appears that I have bricked my x500. I can't boot into recovery, and my computer isn't detecting my phone, I just get a red charge light. I've looked through the thread about scatter files and so on but can't get my head aound how to use the SP tool, its not working for me anyway. Can anyone link an easy to follow step by step guide or help? It looks like there is a solution but I can't figure it out. Any help would be really, really appreciated!!:
Click to expand...
Click to collapse
https://mega.nz/#!od5GELQC!G5Oekg9UU_GwAABPyBcDdD78wFIGsILZKGUsnY3hu_A, download this file, extract it, download sp flash tool latest from their site, open it, select scatter file from extracted zip file,select download only mode,click on download then connect ur device with usb cable, downloading will start n ur in action again...?
transistor_101 said:
https://mega.nz/#!od5GELQC!G5Oekg9UU_GwAABPyBcDdD78wFIGsILZKGUsnY3hu_A, download this file, extract it, download sp flash tool latest from their site, open it, select scatter file from extracted zip file,select download only mode,click on download then connect ur device with usb cable, downloading will start n ur in action again...?
Click to expand...
Click to collapse
Thank you for your reply! Unfortunately, my computer is not detecting my phone when its plugged in, is there any solution to this? Thanks again for your assistance...
download mtk drivers n install it, & for sp flash to work, device needs to be in switched off n disconnected from pc, u need to connect device after u hit download button.
transistor_101 said:
https://mega.nz/#!od5GELQC!G5Oekg9UU_GwAABPyBcDdD78wFIGsILZKGUsnY3hu_A, download this file, extract it, download sp flash tool latest from their site, open it, select scatter file from extracted zip file,select download only mode,click on download then connect ur device with usb cable, downloading will start n ur in action again...?
Click to expand...
Click to collapse
I've followed your instructions, nothings seems to be happening, I'm seeeing this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What do you think I'm doing wrong?
Cant view attached image, but problem seems to similiar to this one,
http://www.the247tech.com/tutorial/how-to-unbrick-letv-x500-red-light-problem/
transistor_101 said:
Cant view attached image, but problem seems to similiar to this one,
http://www.the247tech.com/tutorial/how-to-unbrick-letv-x500-red-light-problem/
Click to expand...
Click to collapse
Sorry, heres a link to the photo: http://imgur.com/gallery/wvlS6
Yeah, I tried that on a Win 7 laptop, the phone still isn't detected, I think I'll have to pop the battery, going to have to get a heatgun tomorrow!