This is a custom recovery based on Amon RA's recovery (NexusOne) source.
This recovery is for the HTC DESIRE :
Features
full ADB access in recovery mode
Busybox v1.15.3
Optical TrackBall navigation ( Volume-key to go back) option
Menu :
Reboot system now :: reboot your phone
USB-MS Toggle :: enable/disable USB mass storage (use when the phone is connected to your PC)
Backup/Restore
Flash zip from sdcard :: Flash a zip update file from your sdcard
Wipe
Partition sdcard
Other
Power off :: Powers off your phone
Special Thanks To:
AmonRa -> for recovery
Pual -> Root of Desire
And Many Many Many Others
Way to use it: ->
1. Turn Off Device
2. Hold Volume Down Button + Powerbutton -> u wil reach Hboot (White Screen)
3. Use Volume Down To Move On Recovery Then Use Power Button To Select -> Now u see Black Screen With Red Triangle.
4. Connect Your Phone To Desktop/Laptop.
5. Both In Recovery Mode Using ->
For Windows users -> To Enter Recovery
Code:
Extract Above Given .zip to Desktop
For Xp user -> Run recovery-windows.bat
For Vista & Windows 7 -. Run recovery-windows.bat [B]AS ADMINISTRATOR [/B]
For Linus Users -> To Enter Recovery
Code:
Extract Above given .zip to home
Open terminal from extracted Folder Using Right Click
Now Type:
sudo ./recovery-linux.sh
Enter Su password
rest tut is given in roms (atleast my roms) -> http://forum.xda-developers.com/showpost.php?p=6626137&postcount=2
If ABOVE STEPs for recovery Doesnot work, try these steps shawe_ewahs
Download:
Desire Fake-Flash Recovery:
Click Here to Download
-> Thx to INXTUX
Previous Versions
Download V1
Multiupload
Mirror Thx PsYDoX
FOR v1.1 (I M NOT USING THIS PERSONALLY)
View attachment AMDRv1.1.zip
People Please replace -> ALL CONTENT with files in recovery folder of V1
Thank you -> ieftm
Recovery Runs even After u remove usb cable
IF FACING PROBLEM WITH THIS RECOVERY
post it below or u will find Link's in my signature to contact me. ENJOY!!
If ABOVE STEPs Doesnot work try these steps shawe_ewahs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great; will give it a shot
/Martin
Very Nice Work my friend...
I Wait for a Froyo port, then i will root my Phone, i dont want a usb brick -.-"
So what benefit does this recovery menu bring?
So, basically, the difference between this recovery and Paul's recovery is that the recovery does not depend on a computer to work, only to launch the recovery?
Zappza said:
So, basically, the difference between this recovery and Paul's recovery is that the recovery does not depend on a computer to work, only to launch the recovery?
Click to expand...
Click to collapse
it still depends on system -> but pauls recovery didnot wipe ext partitions
You need to push the files over ADB same as bevor (paul)
this recovery is only fixed, usb toggle and wiping fully works....
follow him on twitter, he write down anything xD
?
brilliant work of course - thank you
i have to ask, do you think the usb failing issue some have have experienced is a problem? specifically using the mass storage toggle in this recovery.
i am so eager to root but worried about the usb brick issue ??
terminal 7 said:
brilliant work of course - thank you
i have to ask, do you think the usb failing issue some have have experienced is a problem? specifically using the mass storage toggle in this recovery.
i am so eager to root but worried about the usb brick issue ??
Click to expand...
Click to collapse
i flash abt 15 to 30 roms per day this is minimum and many time it doesnot boot
i have not faced this issue till now
if i come across it and i find solution i will surely share it
Looks like it's working great on my Desire with Windows 7 X64!
Can't wait for Froyo!
ahmgsk said:
it still depends on system -> but pauls recovery didnot wipe ext partitions
Click to expand...
Click to collapse
That explains why I needed to partition my SD card to avoid boot loops!
can I flash it the regular way? As in, flash zip?
Thank you!
H00pyFr00d said:
That explains why I needed to partition my SD card to avoid boot loops!
Click to expand...
Click to collapse
when u used roms with a2sd (applications to sd card) u need to partition ur sdcard
when u used b4 recovery -> it never wiped ext partition
u had to break partition and remake it while flashing
but that prob is no more -> u can wipe ext with this recovery
Twister360 said:
can I flash it the regular way? As in, flash zip?
Thank you!
Click to expand...
Click to collapse
its not for flashing u hav run it via pc same as b4
great work, been reading the updates on twitter all last night and this morning
Aha, I see!
Can somebody please uploade a mirror, Rapidshare is talking dirty to me
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.
Click to expand...
Click to collapse
I don't get it
Will we be able to flash custom ROMs without connection to computer?
RustyJoe said:
Will we be able to flash custom ROMs without connection to computer?
Click to expand...
Click to collapse
try reading the post
"The purpose of this recovery is to avoid using adb by accessing all features directly from the menu."
newcastlepunto said:
try reading the post
"The purpose of this recovery is to avoid using adb by accessing all features directly from the menu."
Click to expand...
Click to collapse
That doesn't clearly answer his question.
The simple answer is NO. You still need to connect to the computer.
Related
Hi! A lot of people ask for a guide to install ClockWorkMod Recovery 3.0.0.5 on the Desire HD.
I'm not a pro, i make this guide to help people ! Some one can correct me if I'm wrong, i'm open !
Description:
This guide will help you to install CWM 3 on your Desire HD.
Warning:
CWM 3 doesn't support update-script (Amend), it requires update-binary and updater-script (Edify)
Not all mods use updater-script, test and if that don't work, try this this usefull tool that make the conversion betwen Amend and Edify: amend2edify
If some one want, i can explain the use of this tool
Before Flashing:
You need adb and fastboot to perform this install !
You can download it here:
http://www.multiupload.com/QACREBQOWO
You also have to download the CWM 3 .IMG here:
http://www.multiupload.com/80H7K8IXG4
Let's GO !:
1) Extract the content of adb_fasboot.rar in a folder named "adb_fastboot" at the root of your disk (ex: "C:\adb_fastboot")
2) copy the .IMG of CWM 3 into the same folder of the step 1 (ex: "C:\adb_fastboot\ace-cwm-3.0.0.5.img")
3) Connect your phone by USB in (Charge only mode
4) Open a command prompt: Windows key + R and type "cmd" and valid by OK
5) Go into your adb_fastboot folder with this command:
Code:
cd C:\adb_fastboot
If your folder disk is not c:\ replace "C" by the correct letter !
If your folder is not named adb_fastboot, repalce "adb_fastboot" by your folder name !
6) Reboot your phone in bootloader with this command:
Code:
adb reboot bootloader
7) Flash the recovery with this command:
Code:
fastboot flash recovery ace-cwm-3.0.0.5.img
8) Reboot your phone:
Code:
fastboot reboot
Well done !
You have successfully flashed ClockWorkMod Recovery 3.0.0.5 on your Desire HD
Great tut But U must also mention about this: http://forum.xda-developers.com/showpost.php?p=11247819&postcount=11554
Info just added to the How-To !
Thanks Krzysiec !
guys after flashing cwm 3 can we flash cwm 2.5.1.3? is it possible without any problem?
so we don't need the clockmodwork folder in sd card anymore after flashing this img?
Here's CWM 3 as an exe:
http://db.tt/zcBCCxJ
Connet phone to PC, boot to fastboot and then run exe
paarry said:
guys after flashing cwm 3 can we flash cwm 2.5.1.3? is it possible without any problem?
Click to expand...
Click to collapse
I installed CWM 3 earlier but I just went back to 2.5.1.3 using ROM Manager as I couldn't be bothered updating mods to work with CWM 3. No problems to report
how to change color font ?
dark green or dark blue mayby white?
I do not like ... brown
LOL sorry.. U can't.. it's only recovery, you don't use it that often to really be bothered about .. and it's orange, not brown
hi there ...
ppl how try the new cw 3 ... what is the point to move from 2.1.5 to 3.0.05 ..
anyone can repot the advantige and disadvan...???
You need to upgrade to use gingerbread 2.3. Cwmod 3 uses a ext4 partition and 2... series uses an ext3 partition.
Sent from my Desire HD using XDA App
How do u know if it is installed or not?
lpachuong said:
How do u know if it is installed or not?
Click to expand...
Click to collapse
Just boot into recovery and check it.
Is the charging bug still present in 3.x version?
Is it possible to do a restore with cwm3?
Every time I try to make a restore from a cwm7 backup
Cwm shows a MD5 error.
anko184 said:
Just boot into recovery and check it.
Is the charging bug still present in 3.x version?
Click to expand...
Click to collapse
Yes, but it's not a bug, it's a functionality ...
Tried, did not work. Why?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT: s-off was missing, mission accomplished!
I'll try the exe file. But again, as asked above, what is the benfits with this 3.x?
Is fixed in this version turn off problem?
Sent from future
mattiadj said:
Is fixed in this version turn off problem?
Sent from future
Click to expand...
Click to collapse
+1...
......
It's not a bug, as said the developper of this recovery!
Please, read previous post before post...
Sent from my Desire HD using XDA App
I haven't understanded...when I turned off my phone and then I connected it to the battery charger it wake up in cwm recovery...it isn't a bug? however I'm using the 2.5.1.3 version...and I think it isn't a good thing to charge always the phone turned on ..
can someone explain me? Tganks
Sent from my HTC Desire HD using Tapatalk
Hi,
I made a Backup & Recovery Script in the German Android Hilfe Forum for the Galaxy 3.
The Tool make a flashable Rom with 3 Clicks and Restore the Backup with one Flash and one Click.
The Script restores all Apps, app Data Google Account and Wifi key´s.
How To:
1. Unzip the Alexgalaxys G3 Recovery v2.3.zip wherever you want
2. Plug your Phone in USB Debugging Mode to you Computer
3. Start the Backup.bat
4. Grant Superuser Permissions (6 or 7 times)
5. Your backup is finished
In the "Alexgalaxys G3 Recovery v2 Final" Folder now is a CustomRom.tar.
Flash it as One Package.
If the Phone is started plug the Phone in Usb debugging mode and Run the Recovery.bat after it is complete you have to reboot you Phone.
[!!!] Please download the new version 2.3 v2.2 had a Bug in the tar.exe [!!!]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
deskjeti said:
Hi,
I made a Backup & Recovery Script in the German Android Hilfe Forum for the Galaxy 3.
The Tool make a flashable Rom with 3 Clicks and Restore the Backup with one Flash and one Click.
The Script restores all Apps, app Data Google Account and Wifi key´s.
How To:
Unzip the zip file wherever you want and plug in your Phone with USB Debugging Mode.
Run the Step1 and wait, after Step1 is finished run Step2 and if Step2 finished Run Step3
In the "Alexgalaxys G3 Recovery v2 Final" Folder now is a CustomRom.tar.
Flash it as One Package.
If the Phone is started plug the Phone in Usb debugging mode and Run the Recovery.bat after it is complete you have to reboot you Phone.
Link: http://www.multiupload.com/NV0CFVYV2I
Click to expand...
Click to collapse
Does this effectively restore data?
You overcame the bootloop then ?
Why the 3/2 step approach ?
It dont restore the complete /data partition,
if i would do this it would give a bootloop.
It Restores the apps, app data wifi keys and some other informations.
@Bubble-be
If i run the 3 Scripts in only one script it doesnt work.
I tryed to make it one click but it dont work, i dont know why.
And it dont will give a bootloop
So I just studied the files, and it is almost the exact same thing as my backup method, except it is all adb
deskjeti said:
@Bubble-be
If i run the 3 Scripts in only one script it doesnt work.
I tryed to make it one click but it dont work, i dont know why.
And it dont will give a bootloop
Click to expand...
Click to collapse
Try adding these at the end
Code:
Call .\Step2.bat
at the end of Step1.bat
Code:
Call .\Step3.bat
at the end of Step2.bat
ok thanks i will try it
deskjeti said:
ok thanks i will try it
Click to expand...
Click to collapse
I already did it for you
deskjeti said:
Hi,
I made a Backup & Recovery Script in the German Android Hilfe Forum for the Galaxy 3.
The Tool make a flashable Rom with 3 Clicks and Restore the Backup with one Flash and one Click.
The Script restores all Apps, app Data Google Account and Wifi key´s.
How To:
Unzip the zip file wherever you want and plug in your Phone with USB Debugging Mode.
Run the Backup.bat
In the "Alexgalaxys G3 Recovery v2 Final" Folder now is a CustomRom.tar.
Flash it as One Package.
If the Phone is started plug the Phone in Usb debugging mode and Run the Recovery.bat after it is complete you have to reboot you Phone.
Click to expand...
Click to collapse
I saw you reuploaded. Don't even use this code. It isn't needed in any of them. My advice? Delete them
Code:
Call .\adb.exe
or
Code:
Call .\tar.exe
It looks cleaner.
Also, would you like me to create a DOS gui for it?
Ok thanks,
i will delete the codes in the next version
And a gui would be really nice
deskjeti said:
Ok thanks,
i will delete the codes in the next version
And a gui would be really nice
Click to expand...
Click to collapse
Alright! Same color as the Lestatious updater?
yes the color form the updater looks nice
deskjeti said:
yes the color form the updater looks nice
Click to expand...
Click to collapse
Alright. Seeing as how you created this, instead of using my ADB method, do I have permission to use this as a backup tool for Lestatious?
yes you can use it, but pls wait 1 minute ^^ i fonund a bug and will upload a new version in few minutes
Okay new Version is online
with cleaner script and bugs fixed
deskjeti
I send you an pm with a link to my old script...
Can be useful for something xD
cya
Okay new version 2.3 online, now the tar.exe will make a flashable .tar one package
Tried .update.bat closes
Can u give clean steps to do it..
Thanks
You mean the Backup.bat ?
Ok i will write a How to but my English is not very good
First of all, all props goes to the OP of this thread. This is merely a step-by-step detailed guide on the process since there were a lot of members complaining that the steps were unclear.
- Download the following and extract all the files:
MT6577 USB VCOM drivers (link: http://www.mediafire.com/?2sf30pboet4qvov)
SP Flash Tool v3.1224.01.rar (link: http://www.mediafire.com/?h68v8yhhtci8h0e)
CWM-ROOT-B92M.zip (link: http://www.mediafire.com/?8o2yx9ssz1abwon)
2.5gb-data-perm-root.zip (link: http://www.mediafire.com/?4wg5f6rgat8qdrt)
- Install the MT6577 USB VCOM drivers drivers
- Inside the 2.5gb-data-perm-root folder make sure the files have the following names (CASE SENSITIVE!):
recovery.img
EBR1.img
boot.img
logo.img
MBR.img
preloader.img
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Turn off your phone and unplugg the USB cable
- Start SP Flash Tool
- Under options in the menubar check "USB mode"
- Under File in the menubar click on "Open scatter-loading file" and select MT6577_Android_scatter_emmc.txt from the CWM-ROOT-B92M folder
- Double click the following rows inside SP Flash Tool:
PRELOADER and select preloader.img (from 2.5gb-data-perm-root folder)
MBR and select MBR.img (from 2.5gb-data-perm-root folder)
EBR1 and select EBR1.img (from 2.5gb-data-perm-root folder)
BOOTIMG and selet boot.img (from 2.5gb-data-perm-root folder)
RECOVERY and select recovery.img (from 2.5gb-data-perm-root folder)
LOGO and select logo.img (from 2.5gb-data-perm-root folder)
You should have the following then:
- Click on "Download" inside SP Flash Tool
- Take out the battery of the phone
- Put the battery in
- Connect USB cable with your computer
- The bar at the bottom of SP Flash tool should go to 100% a few time and present you with a green circle when done
- Done flashing, hit volume up + power to start up CWM and make a backup
I hope this detailed guide helps everyone out
~Whookid
Disclaimer: Messing around with your phone can be fun but can also cause damage to your phone. I am in no way responsible for anything that you do. I am merely sharing what I managed to do.
Red triangle
Hi, i cant get to the recovery mode...
I press Power und volume up but there is just the Android with a red triangle.
Can you help?
What ROM can you use with this ?
Some of the files are named a little bit differently, but overall pretty much straightforward steps thanks to the guide above.
first thanks for the guide!!!
but u should add this to make root working
http://forum.xda-developers.com/showpost.php?p=33990331&postcount=75
I did not have to do that. I simply added a Google account, started the Google Play Store and it told me there was an update for "superuser".
Did the update, rebooted and done!
Sent from my B92 using Tapatalk 2
Whookid said:
I did not have to do that. I simply added a Google account, started the Google Play Store and it told me there was an update for "superuser".
Did the update, rebooted and done!
Sent from my B92 using Tapatalk 2
Click to expand...
Click to collapse
maybe it was not there cause i did not the wipe data/factory... xD
but now when i do it its there
bonecrusher2010 said:
Hi, i cant get to the recovery mode...
I press Power und volume up but there is just the Android with a red triangle.
Can you help?
Click to expand...
Click to collapse
Did the flashing went ok (Green circle at the end?)
********er said:
What ROM can you use with this ?
Click to expand...
Click to collapse
Any ROM that you can find that is compatible with the Star B92M.
steelburn said:
Some of the files are named a little bit differently, but overall pretty much straightforward steps thanks to the guide above.
Click to expand...
Click to collapse
Yeah, to avoid confusion I made everyone rename the files according to the first post.
android_xcuj28 said:
maybe it was not there cause i did not the wipe data/factory... xD
but now when i do it its there
Click to expand...
Click to collapse
Ok good to know, thanks for the input
Broken touch screen Star B92m
i broke the touch screen of B92m
Where can i find new one and how can i change it?
andys312 said:
i broke the touch screen of B92m
Where can i find new one and how can i change it?
Click to expand...
Click to collapse
Your best option is to contact the seller and ask him for more information about this.
After flashing with 2.5GB ROM, I have issue with my camera: it detects 80MB partition as the SDcard partition.
Anyone know how to change this? Or.. which file should I look for to change the camera save location?
Make sure you have an external sd-card inserted in the phone. It should automatically be mounted to /sdcard/ where you should have enough space to store your camera photos.
Sent from my B92 using Tapatalk 2
What charger are you using and how fast/slw will it charge a empty battery?
Mine takes for ever (8hrs from 0%), the charger fastcardnet send me, but also a standard usb charger i got.
I'm just using the default micro USB chargers I have laying around. I never charge via a computer (USB) though.
Sent from my B92 using Tapatalk 2
@Whookid
Yes worked!
Hi,
I have followed this guide but I didn't get root access.
I also wiped data and did the factory reset but there is no superuser...
What do I have to do now?
And I have another question: What do I need to do to go to the Internet by connecting to my Laptop (in it's function as a Wifi-hotspot) and using his wired-internet-connection? I only got it by Ad-Hoc but it seems that this doesn't work anyway...
Thx,
bvb09kingz
bvb09kingz said:
Hi,
I have followed this guide but I didn't get root access.
I also wiped data and did the factory reset but there is no superuser...
What do I have to do now?
And I have another question: What do I need to do to go to the Internet by connecting to my Laptop (in it's function as a Wifi-hotspot) and using his wired-internet-connection? I only got it by Ad-Hoc but it seems that this doesn't work anyway...
Thx,
bvb09kingz
Click to expand...
Click to collapse
Try flashing again and Superuser should be working. Once flashed I suggest you start the play store and you'll see that there is an update available.
About the Wi-fi: that's something computer related so don't know for sure about that one. I just Googled and came across this website:
http://www.connectify.me
Sent from my B92 using Tapatalk 2
steelburn said:
After flashing with 2.5GB ROM, I have issue with my camera: it detects 80MB partition as the SDcard partition.
Anyone know how to change this? Or.. which file should I look for to change the camera save location?
Click to expand...
Click to collapse
I have the same problem, how did you fix it?
I had a 2.5 GB space on my Internal SD Card before I do this root, now it is 83 MB, I could try a factory reset but I still need the rooting so I will run into this problem again.
Amjadov said:
I have the same problem, how did you fix it?
I had a 2.5 GB space on my Internal SD Card before I do this root, now it is 83 MB, I could try a factory reset but I still need the rooting so I will run into this problem again.
Click to expand...
Click to collapse
read this... i also got the same problem
http://forum.xda-developers.com/showpost.php?p=33990331&postcount=75
android_xcuj28 said:
read this... i also got the same problem
http://forum.xda-developers.com/showpost.php?p=33990331&postcount=75
Click to expand...
Click to collapse
When I first did the root I did not the su.zip step so I booted my phone and it informed me that my internal SD card is damaged amd asked me if I wanted to format it, I clicked yes and then it became 83 MB, I did the root again and flashed su.zip too, I also tried to format the internal SD card but it is still 83 MB.
I think I need to reformat with specifying the new size, how can I do that?
Hey Guys,
Many People are confused how to install CM 12.1 (lollipop) ROM on our device.
So, here's a brief Guide.
Part 1: Installing Recovery
1. Download TWRP Recovery From the Link: https://www.androidfilehost.com/?fid=24407100847293110
2. Download ODIN From this link. http://odindownload.com/download/Odin3_v3.10.7.zip
3. Install Samsung USB Drivers. http://androidhost.org/XIVsA
4. Extract Odin and run odin.exe on your pc.
5. Shut Down your Phone and Press Volume down + power button + home button simultaneously.
6. Press Continue.
7. Open Odin on your pc and select AP and browse to the recovery file you downloaded.
8. It shows port no in ID:COM section. Dont touch any other thing and press start.
9. Now, Your Phone will automatically rebooted.
Part 2 : Installing ROM
10. Download these stuff and copy them to ur microsd card.
CM 12.1 - 6 March Update - https://www.androidfilehost.com/?fid=24438995911971793
GAPPS (For Play Store) - https://www.androidfilehost.com/?w=files&flid=31528
11. Shut Down your Phone and press Volume Up + Power + Home at same time.
12. TWRP Recovery will now open.
Note:When entering TWRP Recovery, it will ask you if you want to keep system partition Read only, check the box "Never show this screen during boot again" and swipe the lock bar, else you can't modify system partition in TWRP like install ROM, root...
13. Select Wipe and wipe cache, dalvik cache, system, internal storage,data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
14. Select Install and select the rom file and install it. (it may take some time)
15. Now Select Install again and select gapps zip and reboot system and you are all done.
Hit Thanks if this is useful for you.
Leave your FeedBack
use same procedure for flashing cm11 as well but obviously download cm11 rom and gapps for android 4.4.4
Thank you
i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?
did it get completed on odin? Try changing usb cable and usb port
Will it work with cwm
And also is it necessary to download (gapps)
Does it have to be stock frimware so the rom could be installed?
Thank's DEV @SandPox for this nice ROM and for the effort to do for all bugs.
__________ OFFICCIAL _________
http://forum.cyanogenmod.org/topic/...galaxy-trend-plus-s-duos-2-gt-s7580-gt-s7582/
please help
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap
How to fix deadlock or headset problem...
Experimental kernel
https://www.androidfilehost.com/?fid=24269982087004359
Code:
Note for who don't know how to upgrade kernel:
This zip file are not supposed to be flash in recovery
extract it 1 time, you'll get modules/ and kernel.tar
kernel.tar flash by odin or extract it to get boot.img and flash it by any method you want
modules/* copy to /system/lib/modules/, old file must be delete and copy new file to there (remember to backup old modules)
this kernel are supposed to not have any deadlock or headset problem, report to me if anything gone wrong
remember to backup your old kernel
know problem: incall make phone crash, will fix later
damn.. i forgot to fix RIL for s7582, RIL will not work for s7582
surprise: I just know how to fix dialer lag, our phone kernel set the limit to 60fps maximum frame rate, I tried to increase it to 70fps and dialer lag is gone xD
Credits:
Sandpox
Its not installing . I tried it . Showing an error but gaaps is working.
rahulhanda20 said:
Will it work with cwm
And also is it necessary to download (gapps)
Click to expand...
Click to collapse
Try CWM..
Gapps is for play store and framework
munthir said:
Does it have to be stock frimware so the rom could be installed?
Click to expand...
Click to collapse
Not necessary but recomended
alay shah said:
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap
Click to expand...
Click to collapse
i think u have selected read only whenu opened twrp first time...
Install TWRP again and uncheck read only check on dont ask again and continue...and it will work
Light Hope said:
Its not installing . I tried it . Showing an error but gaaps is working.
Click to expand...
Click to collapse
What Error u got
Mohned said:
i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?
Click to expand...
Click to collapse
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:
tried that solution but still it shows same error... e unable to mount system
For this do we need to be on CM 11 ????
Light Hope said:
For this do we need to be on CM 11 ????
Click to expand...
Click to collapse
It doesnt matter whether u are on cm11 or stock unless u wipe everything (except external sd) before install
abbi339 said:
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:
Click to expand...
Click to collapse
Thanks alot for replying me^^ .. i'll try this and tell you the results later ..oh and sorry for my bad English
Wow!
It works, no problem.
Can u please tell me how could I root now?
Last time I use I-root but, now its not working.
Give me a instruction please.
IM NOT RESPONSIBLE IF YOU BRICK YOUR TAB OR DECIDE TO BE CARELESS OR CREATE A CYCLONE... you know the drill.
HOW TO ROOT SM-T116 TAB 3 LITE 7.0 3G VOYAGE-XX ( Galaxy Tab 3 Lite VE (3G) (SM-T116 ))
After searching for over a month on how to root/install twrp all i cound find were instructions for the SM-T110/1...
if thread already exists pls notify
N.B I TAKE NO CREDIT FOR THIS RECOVERY IN ANYWAY
I am writting to help fellow SM-T116 owners... Since ive been searching for a long time.... I believe there isnt a guide to root this Tab yet.
- N.B MAKE SURE you device's code name is goyave or goyave3g
1. Download the twrp recovery here
- download the recovery in .tar format...
- you will upgrade to v3 manually.
2. Download Odin v3.10.* here
-> copy them to a place you know on ur pc such as Desktop
3. Boot your Tab 3 lite to download mode by: pressing "power + home + vol down"
-> believing all your drivers are installed correctly
3.1 open Odin*.exe ,
3.2 connect your tab and press volume up...
-> at this stage Odin should recognise your device
on the ID:COM section like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. UNTICK AUTO REBOOT or you wont be able to enter recovery
5. Tap pn AP and go to the recovery you downloaded.
select it
6. Press on Start to begin the flashing process
-> After Odin flashes the recovery it will tell you PASS!
7
7.1. Preas and hold POWER + VOLUME DOWN
7.2. when the screen goes black change and hold HOME + VOLUME UP
Now you will enter TWRP... stage 1 done.
rooting on post #2:good:
Now TWRP is functional... Time to root.
1. Download Chainfire's SuperSu flashable zip here
-> and thanking is not a crime.
2. Reboot to recovery...
ALLOW TWRP TO MODIFY THE SYSTEM PARTITION
3.1. Select install
3.2. navigate to your supersu zip
/sdcard/* or /extsdcard/*
-> when you are at the folder where your zip is it will be on the dialog on the right.
4.1. select it
4.2. swipe to confirm
4.3. select wipe cache/dalvik and reboot...
Now you have a Custom Recovery and you are rooted... Doors open.
Becarefull to not to open the wrong doors
THE PEOPLE WHO MADE THIS POSSIBLE
CREDIT GOES TO:
BIG THANKS TO TeamWin - TWRP FOR THE AWESOME RECOVERY AND
CHAINFIRE for the awesome supersu
SAMSUNG FOR Odin and Demostration Image
THATS IT...!!!!!!!!!!!!!!!!!!!!!!!!!!
will upload deodexed and zipalign rom soon.
Very nice !
:laugh::laugh::laugh:
This works for 116NY too xD
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
I am new with Android. Please, can you describe step by step process
peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
Which part fails bro cause a more detailed procedure is a video right
diana-TF said:
I am new with Android. Please, can you describe step by step process
Click to expand...
Click to collapse
Ill add numbering then...
I wrote every step 1 by 1.
U r probably comfused cause there aren't any numbering as to what to do first.
hi...Replies to Android 4.4.4؟؟؟؟؟
h.azara said:
hi...Replies to Android 4.4.4؟؟؟؟؟
Click to expand...
Click to collapse
Whatsup
Can you please post a link for custom rom
Ponie123 said:
Can you please post a link for custom rom
Click to expand...
Click to collapse
Custom Rom like??
nhlalukoG said:
Custom Rom like??
Click to expand...
Click to collapse
Like CYANOGEN or Pac man
Lol they r built bro...
N i guess no one has built it...
peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
i will help you,
1: install kingoroot on your pc
2:Enable USB debugging
3:connect your phone to pc wait for processing
4:when 99% your phone automatically restarted, do not put off the usb cable when it complete
5:hope your phone will b e rooted
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Adebayo0437 said:
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Click to expand...
Click to collapse
Hahaha not possible... the update.zip need to be signed by Samsung specifically...
Unless you get a modified stock recovery which needs to be flashed via Odin...
Ok
Rushaan n said:
Ok
Click to expand...
Click to collapse
Does it have "oem unlock" on developer settings??
nhlalukoG said:
Does it have "oem unlock" on developer settings??
Click to expand...
Click to collapse
Deleted