]Hi, Guys, looking for update to Eui Marshmallow 5.8 17s, but unable to do so because of custom rom, root, unlocked bootloader & also don,t want all that hassle to go back to stock rom, recovery etc, just want regular twrp flash, then here we go,
Requrements:
1. Eui 5.8 17s Stock Rom
Link: http://forum.le.com/in/eui_detail.html?euiid=208#
2. Twrp 3.0 & above ( Considering u unlocked bootloader, Rooted, Twrp Installed)
Link: http://bit.ly/2dhyzSQ
3. updater-script
Link: http://bit.ly/2crl1hs
Good practice: Always Backup ur Full Rom in Twrp
Preparing Zip:
1. Now Double click on Downloaded zip & open it, Do not extract
2. Go META-INF/com/google/android
3. Add downloaded Updater-script with winzip option at left top corner, it will replace ur existing script file.
4. Copy Zip file to internal storage
Thats it, ready for flash
Twrp Flashing:
1. boot into recovery using system update menu
2. Wipe everything except internal storage ( or u can also wipe that too)
i kept it because of all data, so it doesnt matter or also u can upgrade on existing rom without wiping anything,
no matter what it will work
3. flash zip, be patient, its big rom, it will take time
4. After Finish, wipe cache / dalvik, reboot, Twrp will show No os installed, ignore it & reboot
5. After reboot, may be or may be not u will find Orange Status, that ur bootloader is unlocked, device canot be trusted, Dont scare, it will reboot.
6. If booting takes lot of time then switch off device by keep pressing power button for 10sec
7. reboot again rom will start optimizing apps
& There u go UR in EUI 5.8 17S Marshmallow
-----------------------------------------------------------------------------------------------------------------------------------------------------
Recommendation: Better Do clean install with all wipes
-----------------------------------------------------------------------------------------------------------------------------------------------------
Thanks
For any queries, pls comment,
Happy to help u Always...
i have done the eui 5.8/MM update from lollipop version in le1s eco..the lockscreen notification is not working anymore for me..also saved wifi do not auto connect when in range...anybody facing this ? then MM update for le eco has bugs..any fix??
avishek83 said:
i have done the eui 5.8/MM update from lollipop version in le1s eco..the lockscreen notification is not working anymore for me..also saved wifi do not auto connect when in range...anybody facing this ? then MM update for le eco has bugs..any fix??
Click to expand...
Click to collapse
There are no known such bugs as u mentioned
Reset & ur good to go
My recommendation was clean install
transistor_101 said:
There are no known such bugs as u mentioned
Reset & ur good to go
My recommendation was clean install
Click to expand...
Click to collapse
Ive done the update through stock recovery...not twrp method..what do u mean by reset..?
avishek83 said:
Ive done the update through stock recovery...not twrp method..what do u mean by reset..?
Click to expand...
Click to collapse
Factory restore, even leforum recommend to do so after update, back up data n restore.
It didn't worked for me
hello there i tried the method step by step but it didn't worked for me . even i can't flash the file . I got this error while flashing "Error executing updater binary in zip"
help me
mkmks211 said:
hello there i tried the method step by step but it didn't worked for me . even i can't flash the file . I got this error while flashing "Error executing updater binary in zip"
help me
Click to expand...
Click to collapse
Are u sure that u replaced updater-script properly.
Better extraxt full rom n replace script file, zip it again n then try flashing
Hope this will work
Let me try
okay let me try this
---------- Post added at 11:41 AM ---------- Previous post was at 11:06 AM ----------
thanks man it worked for me . you made my day , keep doing :good:
can anyone give me stock recovery for marshmallow update..or lollipop if they didnt uodate the recovery
Ztsanga said:
can anyone give me stock recovery for marshmallow update..or lollipop if they didnt uodate the recovery
Click to expand...
Click to collapse
Why you need stock recovery? when u can flash right from twrp, using given script for both chinese & indian 17s Rom
transistor_101 said:
Why you need stock recovery? when u can flash right from twrp, using given script for both chinese & indian 17s Rom
Click to expand...
Click to collapse
because im selling my phone and i need to put everthing as it is
how to change the update script as .zip file is not opening
plz help
mr.shadow said:
how to change the update script as .zip file is not opening
plz help
Click to expand...
Click to collapse
U need to open rom zip file, not script file as zip, double click on zip file it will open, then replace updater script,better use second method for replacing script file.
Bricked!
Hi guys, I tried updated to 17s witout updating TWRP, now it appears that I have bricked my x500. I can't boot into recovery, and my computer isn't detecting my phone, I just get a red charge light. I've looked through the thread about scatter files and so on but can't get my head aound how to use the SP tool, its not working for me anyway. Can anyone link an easy to follow step by step guide or help? It looks like there is a solution but I can't figure it out. Any help would be really, really appreciated!!:
oodles1916 said:
Hi guys, I tried updated to 17s witout updating TWRP, now it appears that I have bricked my x500. I can't boot into recovery, and my computer isn't detecting my phone, I just get a red charge light. I've looked through the thread about scatter files and so on but can't get my head aound how to use the SP tool, its not working for me anyway. Can anyone link an easy to follow step by step guide or help? It looks like there is a solution but I can't figure it out. Any help would be really, really appreciated!!:
Click to expand...
Click to collapse
https://mega.nz/#!od5GELQC!G5Oekg9UU_GwAABPyBcDdD78wFIGsILZKGUsnY3hu_A, download this file, extract it, download sp flash tool latest from their site, open it, select scatter file from extracted zip file,select download only mode,click on download then connect ur device with usb cable, downloading will start n ur in action again...?
transistor_101 said:
https://mega.nz/#!od5GELQC!G5Oekg9UU_GwAABPyBcDdD78wFIGsILZKGUsnY3hu_A, download this file, extract it, download sp flash tool latest from their site, open it, select scatter file from extracted zip file,select download only mode,click on download then connect ur device with usb cable, downloading will start n ur in action again...?
Click to expand...
Click to collapse
Thank you for your reply! Unfortunately, my computer is not detecting my phone when its plugged in, is there any solution to this? Thanks again for your assistance...
download mtk drivers n install it, & for sp flash to work, device needs to be in switched off n disconnected from pc, u need to connect device after u hit download button.
transistor_101 said:
https://mega.nz/#!od5GELQC!G5Oekg9UU_GwAABPyBcDdD78wFIGsILZKGUsnY3hu_A, download this file, extract it, download sp flash tool latest from their site, open it, select scatter file from extracted zip file,select download only mode,click on download then connect ur device with usb cable, downloading will start n ur in action again...?
Click to expand...
Click to collapse
I've followed your instructions, nothings seems to be happening, I'm seeeing this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What do you think I'm doing wrong?
Cant view attached image, but problem seems to similiar to this one,
http://www.the247tech.com/tutorial/how-to-unbrick-letv-x500-red-light-problem/
transistor_101 said:
Cant view attached image, but problem seems to similiar to this one,
http://www.the247tech.com/tutorial/how-to-unbrick-letv-x500-red-light-problem/
Click to expand...
Click to collapse
Sorry, heres a link to the photo: http://imgur.com/gallery/wvlS6
Yeah, I tried that on a Win 7 laptop, the phone still isn't detected, I think I'll have to pop the battery, going to have to get a heatgun tomorrow!
Related
Before these steps make sure you have latest version of kies installed, it helps in keeping latest drivers installed.
Files required for Flashing can be downloaded here.
1) Start Odin (if using windows 7 or vista right click Odin and use run as administrator)
2) Check "One Package" checkbox
3) Check “Reboot” checkbox
4) Check protect ops checkbox (Don’t check this if you are flashing I5801 with I5800 firmware for the first time.)
5) Check reset time checkbox, keep the default value as it is i.e. 300 don’t select any other options.
6) Hit reset files button once.
7) Click ops button and select OPS file for I5800
8) Click one package and select the firmware you want to flash. The file must a .tar file.
9) You can take a backup of your data/apps. For that you can use Titanium Backup. For backing up contacts and SMS.
A) go to contacts press menu/left most button select import/export option, then export the contacts to sdcard.
B) For sms use the app called SMS backup.
10) Now remove your sdcard and sim card from phone and do a factory reset/ Hard Reset also clear cache then restart and put it in downloading mode by pressing vol- + home + power button together.
11) Now connect your phone to pc.
12) Odin will show yellow color and com port no. in the first box on top in Odin.
13) Click Start and watch the progress bar and timer, wait until PASS message appear on Message box.
14) Disconnect the phone from PC when Odin displays disconnect serial port & wait until rebooting phone.
Let the phone boot it takes some time 5-10 mins for first boot so don’t panic.
After reboot do factory reset or Hard Reset also clear cache again then restart phone and put sim and sdcard back in.
Sorry cant post images right now in office, will attach images as soon as i get home.
Please let me know if i have missed anything or if anything needs correction.
ATENTION I5801 USERS:
to keep the i5801 bootscreen you should remove boot.bin and sbl.bin from the .tar file before flashing.
Not needed to remove SD/SIM.
thanks for the guide!
Szaby59 said:
Not needed to remove SD/SIM.
Click to expand...
Click to collapse
yes i know this but is a optional step which i found was given in various other threads and to be just on a safer side.
braveBuddy said:
yes i know this but is a optional step which i found was given in various other threads and to be just on a safer side.
Click to expand...
Click to collapse
hi
good thanks i was actually quite confused on using(i also have a tattoo were it it much easier to flash roms can do it just from ur SD ) Odin
thanks for this tute
will ad this to the roll up thread so it will help the noobs who want to use odin
good work very helpfull of u keep up the good work
Thx
Nice work! Thx
Nice tuto..but im not sure, maybe some step before to flash some firmware to avoid a brick? Something like a comdo buttons enabled check if is working?
Pd. I have a i9000t and its necesary get the combo buttons working before rom loads...
braveBuddy said:
Before these steps make sure you have latest version of kies installed, it helps in keeping latest drivers installed.
Files required for Flashing can be downloaded here.
Please let me know if i have missed anything or if anything needs correction.
Click to expand...
Click to collapse
one question
reg this part : Click ops button and select OPS file for I5800
which do i sellect the one i get when i download ur attachment (i mean the one i have marked in bold in ur above quote)
or is their one ops in the download of the rom for example i down load the recent JPB do i take the ops from here or ur below attachment
the .tar i should take from the downloaded rom right
Note : odin flashing is new for me i do know how to flash for htcTattoo its easy just flash from the sd done this many many times
kindly advise thanks in advance
thanks
hari
haree said:
one question
reg this part : Click ops button and select OPS file for I5800
which do i sellect the one i get when i download ur attachment (i mean the one i have marked in bold in ur above quote)
or is their one ops in the download of the rom for example i down load the recent JPB do i take the ops from here or ur below attachment
the .tar i should take from the downloaded rom right
Note : odin flashing is new for me i do know how to flash for htcTattoo its easy just flash from the sd done this many many times
kindly advise thanks in advance
thanks
hari
Click to expand...
Click to collapse
Till now we don't need different .ops file for any of our firmwares they all can be flashed using same .ops file in the link i gave.
Yes you need to select the the same ops file apollo_0531.ops every time.
You wont get .ops files within Firmware zip files.
Attached is a image of Odin while all is set and we need to hit start.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
giovannivl said:
Nice tuto..but im not sure, maybe some step before to flash some firmware to avoid a brick? Something like a comdo buttons enabled check if is working?
Pd. I have a i9000t and its necesary get the combo buttons working before rom loads...
Click to expand...
Click to collapse
There is no such thing for this phone and i can tell you this that there is no risk of brick in flashing any of those firmwares at samfirmware.com with Odin.
hi
buddy thanks u really got me out of my confusion thanks
ill flash one of the new build some time next week when im back home
once again thanks a mill buddy
thanks
hari
braveBuddy said:
Till now we don't need different .ops file for any of our firmwares they all can be flashed using same .ops file in the link i gave.
Yes you need to select the the same ops file apollo_0531.ops every time.
You wont get .ops files within Firmware zip files.
Attached is a image of Odin while all is set and we need to hit start.
Click to expand...
Click to collapse
no difference after flashing
firmware version-2.1 update1
baseband version- I5801DDJG6
kernel version- 2.6.29
[email protected] #2
build number- ECLAIR.DDJ6
is this wat the result wud be or did i mess up sumwhere.
kindly help,.,.
What firmware did you flash? Are you sure you were in download mode?
Sent from my GT-I5801 using XDA App
can go back to I5801DDJG6.....?
hi
am about to flash my i5801 with i5800xxjpb.....i just wanted to know, can i go back to my original firmware in case there is an official update from samsung..and will it be possible to update through kies then.....
thanks in advance....
deadwood01 said:
hi
am about to flash my i5801 with i5800xxjpb.....i just wanted to know, can i go back to my original firmware in case there is an official update from samsung..and will it be possible to update through kies then.....
thanks in advance....
Click to expand...
Click to collapse
yes it is possible
ya it was on download mode,..,
i flashed with I5801DDJG6 asia firmware.,.,
do we have to keep the usb debugging mode switched on???
tried the same procedure multiple times..,.,
no change.,.,.
You flashed with ddj6 and you get ddj6..
Sent from my GT-I5800 using XDA App
drswap said:
no difference after flashing
firmware version-2.1 update1
baseband version- I5801DDJG6
kernel version- 2.6.29
[email protected] #2
build number- ECLAIR.DDJ6
is this wat the result wud be or did i mess up sumwhere.
kindly help,.,.
Click to expand...
Click to collapse
Its very same like windows xp you install it again and again you get same xp.
thanks just flashed my sg3 with 2.2
and its working fine
thanks
braveBuddy said:
Originally Posted by deadwood01
hi
am about to flash my i5801 with i5800xxjpb.....i just wanted to know, can i go back to my original firmware in case there is an official update from samsung..and will it be possible to update through kies then.....
thanks in advance....
yes it is possible
Click to expand...
Click to collapse
can u please tell how ?
Hey Guys,
Many People are confused how to install CM 12.1 (lollipop) ROM on our device.
So, here's a brief Guide.
Part 1: Installing Recovery
1. Download TWRP Recovery From the Link: https://www.androidfilehost.com/?fid=24407100847293110
2. Download ODIN From this link. http://odindownload.com/download/Odin3_v3.10.7.zip
3. Install Samsung USB Drivers. http://androidhost.org/XIVsA
4. Extract Odin and run odin.exe on your pc.
5. Shut Down your Phone and Press Volume down + power button + home button simultaneously.
6. Press Continue.
7. Open Odin on your pc and select AP and browse to the recovery file you downloaded.
8. It shows port no in ID:COM section. Dont touch any other thing and press start.
9. Now, Your Phone will automatically rebooted.
Part 2 : Installing ROM
10. Download these stuff and copy them to ur microsd card.
CM 12.1 - 6 March Update - https://www.androidfilehost.com/?fid=24438995911971793
GAPPS (For Play Store) - https://www.androidfilehost.com/?w=files&flid=31528
11. Shut Down your Phone and press Volume Up + Power + Home at same time.
12. TWRP Recovery will now open.
Note:When entering TWRP Recovery, it will ask you if you want to keep system partition Read only, check the box "Never show this screen during boot again" and swipe the lock bar, else you can't modify system partition in TWRP like install ROM, root...
13. Select Wipe and wipe cache, dalvik cache, system, internal storage,data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
14. Select Install and select the rom file and install it. (it may take some time)
15. Now Select Install again and select gapps zip and reboot system and you are all done.
Hit Thanks if this is useful for you.
Leave your FeedBack
use same procedure for flashing cm11 as well but obviously download cm11 rom and gapps for android 4.4.4
Thank you
i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?
did it get completed on odin? Try changing usb cable and usb port
Will it work with cwm
And also is it necessary to download (gapps)
Does it have to be stock frimware so the rom could be installed?
Thank's DEV @SandPox for this nice ROM and for the effort to do for all bugs.
__________ OFFICCIAL _________
http://forum.cyanogenmod.org/topic/...galaxy-trend-plus-s-duos-2-gt-s7580-gt-s7582/
please help
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap
How to fix deadlock or headset problem...
Experimental kernel
https://www.androidfilehost.com/?fid=24269982087004359
Code:
Note for who don't know how to upgrade kernel:
This zip file are not supposed to be flash in recovery
extract it 1 time, you'll get modules/ and kernel.tar
kernel.tar flash by odin or extract it to get boot.img and flash it by any method you want
modules/* copy to /system/lib/modules/, old file must be delete and copy new file to there (remember to backup old modules)
this kernel are supposed to not have any deadlock or headset problem, report to me if anything gone wrong
remember to backup your old kernel
know problem: incall make phone crash, will fix later
damn.. i forgot to fix RIL for s7582, RIL will not work for s7582
surprise: I just know how to fix dialer lag, our phone kernel set the limit to 60fps maximum frame rate, I tried to increase it to 70fps and dialer lag is gone xD
Credits:
Sandpox
Its not installing . I tried it . Showing an error but gaaps is working.
rahulhanda20 said:
Will it work with cwm
And also is it necessary to download (gapps)
Click to expand...
Click to collapse
Try CWM..
Gapps is for play store and framework
munthir said:
Does it have to be stock frimware so the rom could be installed?
Click to expand...
Click to collapse
Not necessary but recomended
alay shah said:
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap
Click to expand...
Click to collapse
i think u have selected read only whenu opened twrp first time...
Install TWRP again and uncheck read only check on dont ask again and continue...and it will work
Light Hope said:
Its not installing . I tried it . Showing an error but gaaps is working.
Click to expand...
Click to collapse
What Error u got
Mohned said:
i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?
Click to expand...
Click to collapse
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:
tried that solution but still it shows same error... e unable to mount system
For this do we need to be on CM 11 ????
Light Hope said:
For this do we need to be on CM 11 ????
Click to expand...
Click to collapse
It doesnt matter whether u are on cm11 or stock unless u wipe everything (except external sd) before install
abbi339 said:
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:
Click to expand...
Click to collapse
Thanks alot for replying me^^ .. i'll try this and tell you the results later ..oh and sorry for my bad English
Wow!
It works, no problem.
Can u please tell me how could I root now?
Last time I use I-root but, now its not working.
Give me a instruction please.
IM NOT RESPONSIBLE IF YOU BRICK YOUR TAB OR DECIDE TO BE CARELESS OR CREATE A CYCLONE... you know the drill.
HOW TO ROOT SM-T116 TAB 3 LITE 7.0 3G VOYAGE-XX ( Galaxy Tab 3 Lite VE (3G) (SM-T116 ))
After searching for over a month on how to root/install twrp all i cound find were instructions for the SM-T110/1...
if thread already exists pls notify
N.B I TAKE NO CREDIT FOR THIS RECOVERY IN ANYWAY
I am writting to help fellow SM-T116 owners... Since ive been searching for a long time.... I believe there isnt a guide to root this Tab yet.
- N.B MAKE SURE you device's code name is goyave or goyave3g
1. Download the twrp recovery here
- download the recovery in .tar format...
- you will upgrade to v3 manually.
2. Download Odin v3.10.* here
-> copy them to a place you know on ur pc such as Desktop
3. Boot your Tab 3 lite to download mode by: pressing "power + home + vol down"
-> believing all your drivers are installed correctly
3.1 open Odin*.exe ,
3.2 connect your tab and press volume up...
-> at this stage Odin should recognise your device
on the ID:COM section like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. UNTICK AUTO REBOOT or you wont be able to enter recovery
5. Tap pn AP and go to the recovery you downloaded.
select it
6. Press on Start to begin the flashing process
-> After Odin flashes the recovery it will tell you PASS!
7
7.1. Preas and hold POWER + VOLUME DOWN
7.2. when the screen goes black change and hold HOME + VOLUME UP
Now you will enter TWRP... stage 1 done.
rooting on post #2:good:
Now TWRP is functional... Time to root.
1. Download Chainfire's SuperSu flashable zip here
-> and thanking is not a crime.
2. Reboot to recovery...
ALLOW TWRP TO MODIFY THE SYSTEM PARTITION
3.1. Select install
3.2. navigate to your supersu zip
/sdcard/* or /extsdcard/*
-> when you are at the folder where your zip is it will be on the dialog on the right.
4.1. select it
4.2. swipe to confirm
4.3. select wipe cache/dalvik and reboot...
Now you have a Custom Recovery and you are rooted... Doors open.
Becarefull to not to open the wrong doors
THE PEOPLE WHO MADE THIS POSSIBLE
CREDIT GOES TO:
BIG THANKS TO TeamWin - TWRP FOR THE AWESOME RECOVERY AND
CHAINFIRE for the awesome supersu
SAMSUNG FOR Odin and Demostration Image
THATS IT...!!!!!!!!!!!!!!!!!!!!!!!!!!
will upload deodexed and zipalign rom soon.
Very nice !
:laugh::laugh::laugh:
This works for 116NY too xD
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
I am new with Android. Please, can you describe step by step process
peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
Which part fails bro cause a more detailed procedure is a video right
diana-TF said:
I am new with Android. Please, can you describe step by step process
Click to expand...
Click to collapse
Ill add numbering then...
I wrote every step 1 by 1.
U r probably comfused cause there aren't any numbering as to what to do first.
hi...Replies to Android 4.4.4؟؟؟؟؟
h.azara said:
hi...Replies to Android 4.4.4؟؟؟؟؟
Click to expand...
Click to collapse
Whatsup
Can you please post a link for custom rom
Ponie123 said:
Can you please post a link for custom rom
Click to expand...
Click to collapse
Custom Rom like??
nhlalukoG said:
Custom Rom like??
Click to expand...
Click to collapse
Like CYANOGEN or Pac man
Lol they r built bro...
N i guess no one has built it...
peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
i will help you,
1: install kingoroot on your pc
2:Enable USB debugging
3:connect your phone to pc wait for processing
4:when 99% your phone automatically restarted, do not put off the usb cable when it complete
5:hope your phone will b e rooted
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Adebayo0437 said:
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Click to expand...
Click to collapse
Hahaha not possible... the update.zip need to be signed by Samsung specifically...
Unless you get a modified stock recovery which needs to be flashed via Odin...
Ok
Rushaan n said:
Ok
Click to expand...
Click to collapse
Does it have "oem unlock" on developer settings??
nhlalukoG said:
Does it have "oem unlock" on developer settings??
Click to expand...
Click to collapse
Deleted
Aj's Galaxy C5 (SM-C5000) ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on the latest C5000ZHU1API2firmware (January 2017 Security Patch)
Deodexed
Extremely Debloated
100% De-Knox
Zip-aligned
Rooted with SuperSU v2.79 SR3 Systemless
Added Busybox v1.24
Added latest Sqlite (useful for titantium backup)
Full PlayStore support
Removed all Chinese crap
Added lNIT.D Support
Added SU.D Support
ROM ===>[C5000] Aj's Galaxy C5 ROM v1.0.zip
TWRP ===> C5000_TWRP_ODIN_FILES.zip
Chinese SVoice Addon ===> SVoice_Chinese_Cantonese_Addon.zip
Chinese GoogleTTS Addon ===> GoogleTTS_Addon.zip
FLASH THE LASTEST FIRMWARE FROM SAMMOBILE/UPDATO BEFORE INSTALLING THIS ROM.
MUST FOLLOW INSTRUCTIONS HERE
0. ALWAYS BACKUP(esp EFS)
1. Download the C5 ROM and copy to SD card.
__ Download Samsung SM-C5000 TWRP Files and extract it (EXTRACT ONLY THE TWRP zip once nothing else)
2. Install CROM Service APK (inside the TWRP zip) to unlock crom lock in download mode.(note there is 2 version of the crom.apk if one doesnt work install the other)
3. Disable locks ( disable all FINGERPRINT LOCKs, and OEM lock ). OEM unlock found in developer options, tap build number 7 times to unlock
4. Reboot into download mode. (Make sure CROM Service is unlocked and FRP lock is off.)
5. Using Odin (Inside TWRP zip) Click AP and Select "C5000-TWRP-TEST.tar" from the extracted files
--after flashing the device will reboot itself
6. Turn off device and Reboot into TWRP custom recovery. (by pressing power, home, and volume up button)
7. In TWRP go to WIPE-> select System,Data, Cache, Dalvik ART and wipe them (DO NOT WIPE SD CARD, or internal storage)
8. In TWRP go to INSTALL-> and select the C5 rom and install it
9 . Reboot and wait 7-10 minutes for first boot. (don't panic, only the first boot takes that long, because the ROM is deodexed.)
BUG FREE, LAG FREE, AND PLENTY OF RAM
FOR XPOSED FRAMEWORK GO HERE ==> (PS OUR DEVICE IS ARM) https://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Credits: @ASSAYYED|@Chainfire|@sammobile|XDA Community
TWRP CREDITS: [url]http://bbs.gfan.com/[/URL] and @havork - here
reserved
C5
updated TWRP for our beloved C5
link is here
https://mega.nz/#!CsYyVTha
Decrypt Key is here
!lIguQge6GsGiRFoQexihrYgHHR1SFmavkyUuFpmzL4E
C5
After install found awesome no any bug and lag free but plz required email app which u have DE bloat if possible.
Thank you bro
Thanks Jonathan,
Installed fine, had an issue with "Checking connection screen" on first boot, took forever. Solution was to eject sim card and try again.
But wifi wont connect, can't turn it on. I had this issue with one other ROM.
Any idea?
By the way, thanks for crediting me
havork said:
Thanks Jonathan,
Installed fine, had an issue with "Checking connection screen" on first boot, took forever. Solution was to eject sim card and try again.
But wifi wont connect, can't turn it on. I had this issue with one other ROM.
Any idea?
By the way, thanks for crediting me
Click to expand...
Click to collapse
here is a bug after flash of ur rom i dont have root as some app like Dr.fone and GT recovery said ur device is not rooted but for other apps like titanium backup grant su permission strange problem please help
khalidkls said:
here is a bug...
Click to expand...
Click to collapse
Why quote me? :silly:
havork said:
Why quote me? :silly:
Click to expand...
Click to collapse
Dear Due to dev instruct ur rooting method
jonathanmohamed said:
reserved
Click to expand...
Click to collapse
Dear are you porting UX rom (C9 Pro) for our C5 as i see u have ported some roms for S5 also
I wonder Is this rom support Turkish language and Are there any error(mistakes,bug,lag).Are there any photo(screenshot) for this rom.
Hi everyone, I want to flash this new rom on my C5000 , can anybody tell me which android version is it,, and any screenshots ?? and what's is new in it from the official rom?
do you need to be rooted before this? or can i just flash the file via odin?
i also don't have wifi?
how to install TWRP, as per your instruction TWRP is not installing..
umair_hashmi said:
how to install TWRP, as per your instruction TWRP is not installing..
Click to expand...
Click to collapse
Hey Umair, First of all you have to downgrade your bootloader to C5000ZHU1API2 .. ANd then do the rest of the process. It will work
---------- Post added at 12:50 PM ---------- Previous post was at 12:46 PM ----------
kbajwawt said:
i also don't have wifi?
Click to expand...
Click to collapse
Install the same Bootloader and CSC from the firmware "C5000ZHU1API2" ..
jonathanmohamed said:
0. ALWAYS BACKUP(esp EFS)[/COLOR]
Click to expand...
Click to collapse
how to make a backup if I need a TWRP to do it, but for now I have only stock recovery mode?..
jonathanmohamed said:
3. Disable locks ( disable all FINGERPRINT LOCKs, and OEM lock ). OEM unlock found in developer options, tap build number 7 times to unlock
)
Click to expand...
Click to collapse
Did I get it tight - I will disable it in CROM app (after installing CROM_Service.apk) opened?
jonathanmohamed said:
4. Reboot into download mode. (Make sure CROM Service is unlocked and FRP lock is off.)
)
Click to expand...
Click to collapse
it should be shown somewhere there??
jonathanmohamed said:
4. Reboot into download mode. (Make sure CROM Service is unlocked and FRP lock is off.)
Click to expand...
Click to collapse
what buttons to press to get there?
---------- Post added at 09:17 PM ---------- Previous post was at 09:12 PM ----------
khalidkls said:
updated TWRP for our beloved C5
link is here
Click to expand...
Click to collapse
what TWRP shoud I instal:
1) C5000-TWRP-TEST.tar (15,9 MB (16*762*880 bytes))
or
2) twrp-3.0.3-0-20170303-c5lte.img (15,3 MB (16*095*232 bytes))
?
Cannot open TWRP mode
Hi guys. I am using Baseband version of C5000ZCU1AQC1.
I have already disabled FRP and CROM. And I flashed TWRP using Odin(success) But right now when I follow key sequence and try to boot into TWRP...
It brings me into Recovery.
I cannot access the TWRP.
What is wrong?
At this point should I wipe cache partition & data and then try updating the custom ROM using sdcard? Because if I try to click 'update from sdcard' it shows me that it is not possible.
Also. How to backup everything without TWRP??? This is so confusing. Since I don't have the same firmware version should I just not risk it? Please tell me.
If it's not possible in anyway I would break this phone in two if not.
oz0nex4 said:
Hi guys. I am using Baseband version of C5000ZCU1AQC1.
I have already disabled FRP and CROM. And I flashed TWRP using Odin(success) But right now when I follow key sequence and try to boot into TWRP...
It brings me into Recovery.
I cannot access the TWRP.
What is wrong?
At this point should I wipe cache partition & data and then try updating the custom ROM using sdcard? Because if I try to click 'update from sdcard' it shows me that it is not possible.
Also. How to backup everything without TWRP??? This is so confusing. Since I don't have the same firmware version should I just not risk it? Please tell me.
If it's not possible in anyway I would break this phone in two if not.
Click to expand...
Click to collapse
just flash older Boot loader through ODIN TWRP will work
After flash wifi not work
This guide is for downgrading /Unbrick /Flash Stock Firmware Nokia 5.1 plus to Android Pie or Oreo.
This is STRICTLY for Global Nokia 5.1 plus variant NOT for Chinese variant Nokia X5. If you want to downgrade Chinese variant then follow this guide by hikari_calyx
Guide For Chinese Variant (X5).
What you need ::
1.MTK- Smart Phone Flashing tool which can be downloaded here. (v5.1804) Download
2.Android platform tools and ADB and fastboot drivers . Download
3. MTK Port drivers , For windows only. Download
4.FIRMWARE -
Oreo - PDA-1100-0-00WW-B01_unpacked.7z from . Download
Pie - PDA-214A-0-00WW-B01.full.zip from here . Download
STEP 1 : Backup your important files from internal storage and remove all google accounts from your phone to prevent FRP lock.
STEP 2 : Install all drivers and files mentioned above and extract your desired Firmware .
STEP 3 : Create a full backup using SP Flash tool (must do).
Open Smart Phone Flash Tool, choose the Download Agent file and Scatter File from the unpacked firmware.
DO NOT USE DOWNLOAD AGENT FROM THE FLASH TOOL ITSELF, USE ONLY THE ONE PROVIDED IN THE FIRMWARE.
Should look like this-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TROUBLESHOOTING.
If you get this error
Then go to options and disable "Check LIB DA Match".
Click to expand...
Click to collapse
Then move to "Readback" and tap on add and choose you location where you want save you backup after that you double click on the created readback section and you will see this :
Use any text editor to open the scatter file from extracted firmware , and find "userdata". You'll need the start address of userdata as the length of the full backup.
And change the length from the address you found under "userdata" in scatter file like this and tap ok.
Click on "Readback" and the connect you phone in flashing mode with both volume button pressed and release upon the readback process starts ( you can see it in the lower progress bar).
STEP 4 : Upon completion of the readback process , close SP Flash tool and unplug you phone and trigger it to fastboot mode and change your Active partition to "a" by this command.
Open cmd to use this command.
Code:
fastboot --set-active=a
After this process completes , power off you phone .
STEP 5 : Flashing your firmware.
Open SP Flash Tool and check that DA and Scatter is loaded from your extracted Firmware.
Choose "DOWNLOAD ONLY" mode , not any other or you will loose important partitions.
Then click on download and connect your phone in flashing mode by both volume button pressed and release upon the download process starts ( you can see it in the lower progress bar).
After its finished, it will show "Download OK" popup.
Now just close SP Flash tool , unplug you phone and reboot.
Enjoy your downgraded/ Unbricked Nokia 5.1+.
Special thanks to :
hikari_calyx for Firmware and solving all the errors.
Someone , Someone and Someone for testing this guide.
Hit Thanks if it worked for you.
Tested, guide works perfectly. Also, the given Android version in this guide is 9 (February SP) for those who want to know.
For some reason, the wifi doesn’t work for me, it just falls off and connects again (how to fix it?
Pelmewek said:
For some reason, the wifi doesn’t work for me, it just falls off and connects again (how to fix it?
Click to expand...
Click to collapse
Check your imei and baseband...is it there???
Readback not processing
Cant compltete the readback prccess what should i do?
xdriv3r said:
Cant compltete the readback prccess what should i do?
Click to expand...
Click to collapse
Which version of SP flash tool are you using ??
bx2_nero said:
Which version of SP flash tool are you using ??
Click to expand...
Click to collapse
I used the latest version. I'm going to try again with the recommended version. Thank you .
xdriv3r said:
I used the latest version. I'm going to try again with the recommended version. Thank you .
Click to expand...
Click to collapse
Use Sp flash tool version 5.1804 or 5.1824.
Read the instructions carefully ..
How to backup using sp flashtool?
How to backup using sp flashtool?
bx2_nero said:
Use Sp flash tool version 5.1804 or 5.1824.
Read the instructions carefully ..
Click to expand...
Click to collapse
xdriv3r said:
How to backup using sp flashtool?
Click to expand...
Click to collapse
You must backup your personal data and remove Google account before starting.
The readback process is the backup process in SP flash tool.
Android 10 firmware not available
bx2_nero said:
Pie-PDA-214A-0-00WW-B01.full.zip from here https://androidfilehost.com/?fid=1899786940962585502 (recommended if you are downgrading to root and install Androdi 10).
Click to expand...
Click to collapse
Alas, no mirror found:
mll2 said:
Alas, no mirror found:
Click to expand...
Click to collapse
https://tpedutw-my.sharepoint.com/:...dFks--5G6V4vYBGTwLw1BsthbtIuJqMUN3tQ?e=wOfytH
Try from here
Make sure you download the file mentioned.
PDA_214A_0_00WW_B01_full
bx2_nero said:
https://tpedutw-my.sharepoint.com/:...dFks--5G6V4vYBGTwLw1BsthbtIuJqMUN3tQ?e=wOfytH
Try from here
Make sure you download the file mentioned.
PDA_214A_0_00WW_B01_full
Click to expand...
Click to collapse
Thank you!
I tried downgrading from Android 10 Internal Beta and cannot skip the update screen on reboot. How to fix this?
xdriv3r said:
I tried downgrading from Android 10 Internal Beta and cannot skip the update screen on reboot. How to fix this?
Click to expand...
Click to collapse
Did you follow step 1 - remove Google account to prevent FRP Lock.
Try hard resetting, reset from recovery.
bx2_nero said:
Did you follow step 1 - remove Google account to prevent FRP Lock.
Try hard resetting, reset from recovery.
Click to expand...
Click to collapse
It's just one compulsary update. Around September 2019 sp. I'm good now. I thought I had hardbricked the device when I changed primary partition to b and got stuck in bootloop unable to go into recovery. Then I used volume down + power and usb to directly get into fastboot.
xdriv3r said:
It's just one compulsary update. Around September 2019 sp. I'm good now. I thought I had hardbricked the device when I changed primary partition to b and got stuck in bootloop unable to go into recovery. Then I used volume down + power and usb to directly get into fastboot.
Click to expand...
Click to collapse
Why did you changed your primary partition to B.
bx2_nero said:
Why did you changed your primary partition to B.
Click to expand...
Click to collapse
I'm noob.
xdriv3r said:
I'm noob.
Click to expand...
Click to collapse
Your phone is fine right now?
bx2_nero said:
Your phone is fine right now?
Click to expand...
Click to collapse
Yeah now on feb sp with mtksu and suboot.