This guide is for downgrading /Unbrick /Flash Stock Firmware Nokia 5.1 plus to Android Pie or Oreo.
This is STRICTLY for Global Nokia 5.1 plus variant NOT for Chinese variant Nokia X5. If you want to downgrade Chinese variant then follow this guide by hikari_calyx
Guide For Chinese Variant (X5).
What you need ::
1.MTK- Smart Phone Flashing tool which can be downloaded here. (v5.1804) Download
2.Android platform tools and ADB and fastboot drivers . Download
3. MTK Port drivers , For windows only. Download
4.FIRMWARE -
Oreo - PDA-1100-0-00WW-B01_unpacked.7z from . Download
Pie - PDA-214A-0-00WW-B01.full.zip from here . Download
STEP 1 : Backup your important files from internal storage and remove all google accounts from your phone to prevent FRP lock.
STEP 2 : Install all drivers and files mentioned above and extract your desired Firmware .
STEP 3 : Create a full backup using SP Flash tool (must do).
Open Smart Phone Flash Tool, choose the Download Agent file and Scatter File from the unpacked firmware.
DO NOT USE DOWNLOAD AGENT FROM THE FLASH TOOL ITSELF, USE ONLY THE ONE PROVIDED IN THE FIRMWARE.
Should look like this-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TROUBLESHOOTING.
If you get this error
Then go to options and disable "Check LIB DA Match".
Click to expand...
Click to collapse
Then move to "Readback" and tap on add and choose you location where you want save you backup after that you double click on the created readback section and you will see this :
Use any text editor to open the scatter file from extracted firmware , and find "userdata". You'll need the start address of userdata as the length of the full backup.
And change the length from the address you found under "userdata" in scatter file like this and tap ok.
Click on "Readback" and the connect you phone in flashing mode with both volume button pressed and release upon the readback process starts ( you can see it in the lower progress bar).
STEP 4 : Upon completion of the readback process , close SP Flash tool and unplug you phone and trigger it to fastboot mode and change your Active partition to "a" by this command.
Open cmd to use this command.
Code:
fastboot --set-active=a
After this process completes , power off you phone .
STEP 5 : Flashing your firmware.
Open SP Flash Tool and check that DA and Scatter is loaded from your extracted Firmware.
Choose "DOWNLOAD ONLY" mode , not any other or you will loose important partitions.
Then click on download and connect your phone in flashing mode by both volume button pressed and release upon the download process starts ( you can see it in the lower progress bar).
After its finished, it will show "Download OK" popup.
Now just close SP Flash tool , unplug you phone and reboot.
Enjoy your downgraded/ Unbricked Nokia 5.1+.
Special thanks to :
hikari_calyx for Firmware and solving all the errors.
Someone , Someone and Someone for testing this guide.
Hit Thanks if it worked for you.
Tested, guide works perfectly. Also, the given Android version in this guide is 9 (February SP) for those who want to know.
For some reason, the wifi doesn’t work for me, it just falls off and connects again (how to fix it?
Pelmewek said:
For some reason, the wifi doesn’t work for me, it just falls off and connects again (how to fix it?
Click to expand...
Click to collapse
Check your imei and baseband...is it there???
Readback not processing
Cant compltete the readback prccess what should i do?
xdriv3r said:
Cant compltete the readback prccess what should i do?
Click to expand...
Click to collapse
Which version of SP flash tool are you using ??
bx2_nero said:
Which version of SP flash tool are you using ??
Click to expand...
Click to collapse
I used the latest version. I'm going to try again with the recommended version. Thank you .
xdriv3r said:
I used the latest version. I'm going to try again with the recommended version. Thank you .
Click to expand...
Click to collapse
Use Sp flash tool version 5.1804 or 5.1824.
Read the instructions carefully ..
How to backup using sp flashtool?
How to backup using sp flashtool?
bx2_nero said:
Use Sp flash tool version 5.1804 or 5.1824.
Read the instructions carefully ..
Click to expand...
Click to collapse
xdriv3r said:
How to backup using sp flashtool?
Click to expand...
Click to collapse
You must backup your personal data and remove Google account before starting.
The readback process is the backup process in SP flash tool.
Android 10 firmware not available
bx2_nero said:
Pie-PDA-214A-0-00WW-B01.full.zip from here https://androidfilehost.com/?fid=1899786940962585502 (recommended if you are downgrading to root and install Androdi 10).
Click to expand...
Click to collapse
Alas, no mirror found:
mll2 said:
Alas, no mirror found:
Click to expand...
Click to collapse
https://tpedutw-my.sharepoint.com/:...dFks--5G6V4vYBGTwLw1BsthbtIuJqMUN3tQ?e=wOfytH
Try from here
Make sure you download the file mentioned.
PDA_214A_0_00WW_B01_full
bx2_nero said:
https://tpedutw-my.sharepoint.com/:...dFks--5G6V4vYBGTwLw1BsthbtIuJqMUN3tQ?e=wOfytH
Try from here
Make sure you download the file mentioned.
PDA_214A_0_00WW_B01_full
Click to expand...
Click to collapse
Thank you!
I tried downgrading from Android 10 Internal Beta and cannot skip the update screen on reboot. How to fix this?
xdriv3r said:
I tried downgrading from Android 10 Internal Beta and cannot skip the update screen on reboot. How to fix this?
Click to expand...
Click to collapse
Did you follow step 1 - remove Google account to prevent FRP Lock.
Try hard resetting, reset from recovery.
bx2_nero said:
Did you follow step 1 - remove Google account to prevent FRP Lock.
Try hard resetting, reset from recovery.
Click to expand...
Click to collapse
It's just one compulsary update. Around September 2019 sp. I'm good now. I thought I had hardbricked the device when I changed primary partition to b and got stuck in bootloop unable to go into recovery. Then I used volume down + power and usb to directly get into fastboot.
xdriv3r said:
It's just one compulsary update. Around September 2019 sp. I'm good now. I thought I had hardbricked the device when I changed primary partition to b and got stuck in bootloop unable to go into recovery. Then I used volume down + power and usb to directly get into fastboot.
Click to expand...
Click to collapse
Why did you changed your primary partition to B.
bx2_nero said:
Why did you changed your primary partition to B.
Click to expand...
Click to collapse
I'm noob.
xdriv3r said:
I'm noob.
Click to expand...
Click to collapse
Your phone is fine right now?
bx2_nero said:
Your phone is fine right now?
Click to expand...
Click to collapse
Yeah now on feb sp with mtksu and suboot.
Related
Huawei Honor Holly Facebook Page
Huawei Honor Holly Facebook Group
If You Failed Then Try Second Method Click Here To See
Things You Need :
Rooted Huawei Honor Holly (Also Known as Honor 3C lite)
CWM Recovery For Huawei Honor Holly ------ DataFileHost | MediaFire | 4Shared
Mobileuncle MTK Tools ------Google Playstore Link (Should be installed on your device)
Procedure:
Copy Downloaded File in Your SD Card
After copying the file, make sure the microSD drive is mounted in the phone, and then start MobileUncle Tools in root mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Important: I'm Not Responsible For Any Loss When you arrived at the MobileUncle Tools menu, select the 'Recovery Update' option.
You should be able to see the recovery .img file you have copied to the root of your microSD drive, and you should tap that one.
- You will be asked whether you really want to flash that file into your phone, and you should say 'OK'.
- The flashing process will run, and then you will be asked whether to boot into recovery mode. Because you surely wants to see if the patching process succeeded or not, say OK and then your phone will reboot automatically into recovery mode.
- If the patching process succeeded, you will now be able to see CWM recovery tool screen after the phone finish rebooting. If not, you will see the stock recovery screen.
waqas1412 said:
Things You Need :
Rooted Huawei Honor Holly (Also Known as Honor 3C lite)
CWM Recovery For Huawei Honor Holly ------ Click Here To Download
Mobileuncle MTK Tools ------Google Playstore Link (Should be installed on your device)
Procedure:
Copy Downloaded File in Your SD Card
After copying the file, make sure the microSD drive is mounted in the phone, and then start MobileUncle Tools in root mode.
Important: I'm Not Responsible For Any Loss When you arrived at the MobileUncle Tools menu, select the 'Recovery Update' option.
You should be able to see the recovery .img file you have copied to the root of your microSD drive, and you should tap that one.
- You will be asked whether you really want to flash that file into your phone, and you should say 'OK'.
- The flashing process will run, and then you will be asked whether to boot into recovery mode. Because you surely wants to see if the patching process succeeded or not, say OK and then your phone will reboot automatically into recovery mode.
- If the patching process succeeded, you will now be able to see CWM recovery tool screen after the phone finish rebooting. If not, you will see the stock recovery screen.
Click to expand...
Click to collapse
Mobileuncle, doesn't see the Image file on the SD card root !!! is there anything else that i need check for it to be able to recognize the attached image file ?
bayazeed said:
Mobileuncle, doesn't see the Image file on the SD card root !!! is there anything else that i need check for it to be able to recognize the attached image file ?
Click to expand...
Click to collapse
Copy file in your phone memory then try again
Tried every thing; both "sdcard0" and "sdcard1" ; i only get remote images.!!!!
Ok I'll see
Sent from my Hol-U19 using XDA Free mobile app
bayazeed said:
Tried every thing; both "sdcard0" and "sdcard1" ; i only get remote images.!!!!
Click to expand...
Click to collapse
Download New File
Link is Updated
waqas1412 said:
Download New File
Link is Updated
Click to expand...
Click to collapse
Try Now
Thanks bro; now the image file appears; but the patch failed... ............ Any Ideas?
bayazeed said:
Thanks bro; now the image file appears; but the patch failed... ............ Any Ideas?
Click to expand...
Click to collapse
is your phone rooted ?
Did You Open Mobile Uncle Tool with Root Permission ?
Link Has Been Updated
waqas1412 said:
is your phone rooted ?
Did You Open Mobile Uncle Tool with Root Permission ?
Click to expand...
Click to collapse
Yes, my mobile is rooted, and Mobile Uncle runs with rooted permissions; i also always install busy box after rooting; so that's installed as well.
bayazeed said:
Yes, my mobile is rooted, and Mobile Uncle runs with rooted permissions; i also always install busy box after rooting; so that's installed as well.
Click to expand...
Click to collapse
What Error Do You Face ?
waqas1412 said:
What Error Do You Face ?
Click to expand...
Click to collapse
using the updated file; all went well; Mobile uncle detected the image and performed the recovery upgrade; but on reboot; it reboted to stock recovery .... any ideas
bayazeed said:
using the updated file; all went well; Mobile uncle detected the image and performed the recovery upgrade; but on reboot; it reboted to stock recovery .... any ideas
Click to expand...
Click to collapse
Try Again
Are 40 trials enough ?
Someone posted here that CWM recovery is in Korean. Pl fix it.
The images in the original post; suggests that the attached recovery image is in English... problem is, i can't get it to work ,to start with
Have You Rooted Your Mobile ?
YES, as i mentioned before, my mobile is already rooted !!! still, flash is not successful.
bayazeed said:
YES, as i mentioned before, my mobile is already rooted !!! still, flash is not successful.
Click to expand...
Click to collapse
Use This Method Click Here To See
]Hi, Guys, looking for update to Eui Marshmallow 5.8 17s, but unable to do so because of custom rom, root, unlocked bootloader & also don,t want all that hassle to go back to stock rom, recovery etc, just want regular twrp flash, then here we go,
Requrements:
1. Eui 5.8 17s Stock Rom
Link: http://forum.le.com/in/eui_detail.html?euiid=208#
2. Twrp 3.0 & above ( Considering u unlocked bootloader, Rooted, Twrp Installed)
Link: http://bit.ly/2dhyzSQ
3. updater-script
Link: http://bit.ly/2crl1hs
Good practice: Always Backup ur Full Rom in Twrp
Preparing Zip:
1. Now Double click on Downloaded zip & open it, Do not extract
2. Go META-INF/com/google/android
3. Add downloaded Updater-script with winzip option at left top corner, it will replace ur existing script file.
4. Copy Zip file to internal storage
Thats it, ready for flash
Twrp Flashing:
1. boot into recovery using system update menu
2. Wipe everything except internal storage ( or u can also wipe that too)
i kept it because of all data, so it doesnt matter or also u can upgrade on existing rom without wiping anything,
no matter what it will work
3. flash zip, be patient, its big rom, it will take time
4. After Finish, wipe cache / dalvik, reboot, Twrp will show No os installed, ignore it & reboot
5. After reboot, may be or may be not u will find Orange Status, that ur bootloader is unlocked, device canot be trusted, Dont scare, it will reboot.
6. If booting takes lot of time then switch off device by keep pressing power button for 10sec
7. reboot again rom will start optimizing apps
& There u go UR in EUI 5.8 17S Marshmallow
-----------------------------------------------------------------------------------------------------------------------------------------------------
Recommendation: Better Do clean install with all wipes
-----------------------------------------------------------------------------------------------------------------------------------------------------
Thanks
For any queries, pls comment,
Happy to help u Always...
i have done the eui 5.8/MM update from lollipop version in le1s eco..the lockscreen notification is not working anymore for me..also saved wifi do not auto connect when in range...anybody facing this ? then MM update for le eco has bugs..any fix??
avishek83 said:
i have done the eui 5.8/MM update from lollipop version in le1s eco..the lockscreen notification is not working anymore for me..also saved wifi do not auto connect when in range...anybody facing this ? then MM update for le eco has bugs..any fix??
Click to expand...
Click to collapse
There are no known such bugs as u mentioned
Reset & ur good to go
My recommendation was clean install
transistor_101 said:
There are no known such bugs as u mentioned
Reset & ur good to go
My recommendation was clean install
Click to expand...
Click to collapse
Ive done the update through stock recovery...not twrp method..what do u mean by reset..?
avishek83 said:
Ive done the update through stock recovery...not twrp method..what do u mean by reset..?
Click to expand...
Click to collapse
Factory restore, even leforum recommend to do so after update, back up data n restore.
It didn't worked for me
hello there i tried the method step by step but it didn't worked for me . even i can't flash the file . I got this error while flashing "Error executing updater binary in zip"
help me
mkmks211 said:
hello there i tried the method step by step but it didn't worked for me . even i can't flash the file . I got this error while flashing "Error executing updater binary in zip"
help me
Click to expand...
Click to collapse
Are u sure that u replaced updater-script properly.
Better extraxt full rom n replace script file, zip it again n then try flashing
Hope this will work
Let me try
okay let me try this
---------- Post added at 11:41 AM ---------- Previous post was at 11:06 AM ----------
thanks man it worked for me . you made my day , keep doing :good:
can anyone give me stock recovery for marshmallow update..or lollipop if they didnt uodate the recovery
Ztsanga said:
can anyone give me stock recovery for marshmallow update..or lollipop if they didnt uodate the recovery
Click to expand...
Click to collapse
Why you need stock recovery? when u can flash right from twrp, using given script for both chinese & indian 17s Rom
transistor_101 said:
Why you need stock recovery? when u can flash right from twrp, using given script for both chinese & indian 17s Rom
Click to expand...
Click to collapse
because im selling my phone and i need to put everthing as it is
how to change the update script as .zip file is not opening
plz help
mr.shadow said:
how to change the update script as .zip file is not opening
plz help
Click to expand...
Click to collapse
U need to open rom zip file, not script file as zip, double click on zip file it will open, then replace updater script,better use second method for replacing script file.
Bricked!
Hi guys, I tried updated to 17s witout updating TWRP, now it appears that I have bricked my x500. I can't boot into recovery, and my computer isn't detecting my phone, I just get a red charge light. I've looked through the thread about scatter files and so on but can't get my head aound how to use the SP tool, its not working for me anyway. Can anyone link an easy to follow step by step guide or help? It looks like there is a solution but I can't figure it out. Any help would be really, really appreciated!!:
oodles1916 said:
Hi guys, I tried updated to 17s witout updating TWRP, now it appears that I have bricked my x500. I can't boot into recovery, and my computer isn't detecting my phone, I just get a red charge light. I've looked through the thread about scatter files and so on but can't get my head aound how to use the SP tool, its not working for me anyway. Can anyone link an easy to follow step by step guide or help? It looks like there is a solution but I can't figure it out. Any help would be really, really appreciated!!:
Click to expand...
Click to collapse
https://mega.nz/#!od5GELQC!G5Oekg9UU_GwAABPyBcDdD78wFIGsILZKGUsnY3hu_A, download this file, extract it, download sp flash tool latest from their site, open it, select scatter file from extracted zip file,select download only mode,click on download then connect ur device with usb cable, downloading will start n ur in action again...?
transistor_101 said:
https://mega.nz/#!od5GELQC!G5Oekg9UU_GwAABPyBcDdD78wFIGsILZKGUsnY3hu_A, download this file, extract it, download sp flash tool latest from their site, open it, select scatter file from extracted zip file,select download only mode,click on download then connect ur device with usb cable, downloading will start n ur in action again...?
Click to expand...
Click to collapse
Thank you for your reply! Unfortunately, my computer is not detecting my phone when its plugged in, is there any solution to this? Thanks again for your assistance...
download mtk drivers n install it, & for sp flash to work, device needs to be in switched off n disconnected from pc, u need to connect device after u hit download button.
transistor_101 said:
https://mega.nz/#!od5GELQC!G5Oekg9UU_GwAABPyBcDdD78wFIGsILZKGUsnY3hu_A, download this file, extract it, download sp flash tool latest from their site, open it, select scatter file from extracted zip file,select download only mode,click on download then connect ur device with usb cable, downloading will start n ur in action again...?
Click to expand...
Click to collapse
I've followed your instructions, nothings seems to be happening, I'm seeeing this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What do you think I'm doing wrong?
Cant view attached image, but problem seems to similiar to this one,
http://www.the247tech.com/tutorial/how-to-unbrick-letv-x500-red-light-problem/
transistor_101 said:
Cant view attached image, but problem seems to similiar to this one,
http://www.the247tech.com/tutorial/how-to-unbrick-letv-x500-red-light-problem/
Click to expand...
Click to collapse
Sorry, heres a link to the photo: http://imgur.com/gallery/wvlS6
Yeah, I tried that on a Win 7 laptop, the phone still isn't detected, I think I'll have to pop the battery, going to have to get a heatgun tomorrow!
This is the Xiaomi PocoPhone F1's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
I want to specify that this tool can't bypass Xiaomi Bootloader Unlock procedure but all others function are working
Whoa... It's here already... Gonna make life easier for a lot of people like me ^_^
Thanks for the efforts ? Much Love.
Nice thing
mauronofrio said:
this is the xiaomi pocophone f1's tool all in one discussion thread more info and download go to the original thread
tool all in one
advanced options
functions
install drivers
unlock bootloader
lock bootloader (use carefully)
flash twrp recovery
flash stock recovery
flash stock factory image
install apks
uninstall apks
take a screenshot
flash partitions
erase all data (this function can decrypt the phone)
reboot phone
update the tool to latest version
update adb and fastboot to latest version
set adb and fastboot priviliges in system wide
install zip directly from pc (required twrp on phone)(these functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect twrp on my phone)
flash fastboot rom
delete downloaded files
adb file manager
device list
if you want you can send a request to add a new device here:
new device request form
device list
download
original thread
donate link
if you want to support the project please consider making a donation, thanks.
Click to expand...
Click to collapse
thank you very much it was much awaited tool .
bravo2526 said:
thank you very much it was much awaited tool .
Click to expand...
Click to collapse
Please don't quote the OP.
Sent from my POCO F1 using XDA Labs
Good tool. Please do make provision to select multiple apps at a time under 'install apk' option. Otherwise it is difficult to select a single app, then waiting it to install and then selecting the next app then waiting and so on...
mauronofrio said:
I want to specify that this tool can't bypass Xiaomi Bootloader Unlock procedure but all others function are working
Click to expand...
Click to collapse
EDL too?
itsmuhammedmuneer said:
Good tool. Please do make provision to select multiple apps at a time under 'install apk' option. Otherwise it is difficult to select a single app, then waiting it to install and then selecting the next app then waiting and so on...
Click to expand...
Click to collapse
Good idea, i will do it
mauronofrio said:
Good idea, i will do it
Click to expand...
Click to collapse
Happy to hear that
Boot to edl working?
Puneeth 676797 said:
Boot to edl working?
Click to expand...
Click to collapse
I have not tested it
How to root using this tool? I select root after flashing the recovery but it just flashes the recovery and boots into it. What's the next step?
jperkovic said:
How to root using this tool? I select root after flashing the recovery but it just flashes the recovery and boots into it. What's the next step?
Click to expand...
Click to collapse
Have you choose the magisk version? Can you see when you are in TWRP the device is recognized in adb mode?
itsmuhammedmuneer said:
Happy to hear that
Click to expand...
Click to collapse
Updated the tool with a new Apk Installer that support multiple apk install at the same time
mauronofrio said:
Updated the tool with a new Apk Installer that support multiple apk install at the same time
Click to expand...
Click to collapse
Wow...!!! Thanks for hearing. I wil test and report.:good:
mauronofrio said:
Updated the tool with a new Apk Installer that support multiple apk install at the same time
Click to expand...
Click to collapse
I was busy for a while and I tested it.
Cannot install apks as bulk (30+ apks) by selecting all. I tried to install 68 apks at time, failed, again tried half of it, failed.
No issues with 20-25 apks.
Please do have a note of it and try to fix it.
itsmuhammedmuneer said:
I was busy for a while and I tested it.
Cannot install apks as bulk (30+ apks) by selecting all. I tried for install 68 apks at time, failed, tried half of it, failed.
No issues with 20-25 apks.
Please do have a note of it and try to fix it.
Click to expand...
Click to collapse
Oh god, i tried with 10-15 apks, i will try with more of them, can you tell me which problem gived you?
mauronofrio said:
Oh god, i tried with 10-15 apks, i will try with more of them, can you tell me which problem gived you?
Click to expand...
Click to collapse
No response after selecting the apks. Usually a command window should open, but not in this case. Installing is shown only for a fraction of second and then it disappears and back to "Install selected Apks".
mauronofrio said:
Oh god, i tried with 10-15 apks, i will try with more of them, can you tell me which problem gived you?
Click to expand...
Click to collapse
No issues with 25+ apks. Try with 50+apks.
When I install the .332 global rom, when I start the device, I receive a message that says: the hardware is incompatible with the current system. Someone with a similar problem?
Same problem but once i managed to start 332 rom. Don't know how. Sadly after restart it came back to incompatible hardware. Only roms that works on mine phone are 091 global and chinese.
Derba7 said:
Same problem but once i managed to start 332 rom. Don't know how. Sadly after restart it came back to incompatible hardware. Only roms that works on mine phone are 091 global and chinese.
Click to expand...
Click to collapse
Same to me, only 91 global Works to me and chinese :$ sadly
What is your version of legion ?
DioSilva said:
What is your version of legion ?
Click to expand...
Click to collapse
16G + 512GB
Derba7 said:
16G + 512GB
Click to expand...
Click to collapse
Iam with a Variant 12gb and 128gb
I think we are just missing some steps to make it work because i was able to run 322 once before restarting.
Derba7 said:
I think we are just missing some steps to make it work because i was able to run 322 once before restarting.
Click to expand...
Click to collapse
Yes i guess, i search top much place, and nothing, i try to unlock bootloader and nothing.
also i try recover by lenovoAssistence
I unlocked bootloader via fastboot but it didn't help
Derba7 said:
I unlocked bootloader via fastboot but it didn't help
Click to expand...
Click to collapse
me too :S
Derba7 said:
I unlocked bootloader via fastboot but it didn't help
Click to expand...
Click to collapse
if u got something, tell us please <3
i know how to install 332 you have to carefully follow my steps
First Of fall Before flashing you need to make a backup of
Persist
And
Modem Partition
For That
follow this tutorial
Once Done
Follow the next Instructions
This Is The FireHorse Configuration you need
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now In Meta Build Select 332 content.xml
and flash
After Flash you will boot into Crash Dump Mode
Keep your phone connected with pc and hold power button as soon as you hear the sound of disconectivity hold both volume up and down button
you will boot into edl again
in Qfil Flat Build Go to tools select Partition Manager
in Partition Manager
Find Persist
Right Click on persist and Click On Manage Partition And Click On Erase First Then Click On Load Image And Load The Persist File You Backed Up before flashing
And Do The Same For modem Partition and Load your modem partition which you backed up before flashing when done simply restart your phone by holding power button and wola 332 is successfully installed
here is the screen shoots
make sure to make backup if you did not make any backup then you will lose your imei and some sensors might stop working
best of luck
if you did not make backup then restore persist.img from your rom folder
and for modem partition restore NON-HLOS.bin from your rom folder
if anything goes wrong let me know i will help you
mrgreapes said:
i know how to install 332 you have to carefully follow my steps
First Of fall Before flashing you need to make a backup of
Persist
And
Modem Partition
For That
follow this tutorial
Once Done
Follow the next Instructions
This Is The FireHorse Configuration you need
View attachment 5261385
Now In Meta Build Select 332 content.xml
and flash
After Flash you will boot into Crash Dump Mode
Keep your phone connected with pc and hold power button as soon as you hear the sound of disconectivity hold both volume up and down button
you will boot into edl again
in Qfil Flat Build Go to tools select Partition Manager
in Partition Manager
Find Persist
View attachment 5261405
Right Click on persist and Click On Manage Partition And Click On Erase First Then Click On Load Image And Load The Persist File You Backed Up before flashing
And Do The Same For modem Partition and Load your modem partition which you backed up before flashing when done simply restart your phone by holding power button and wola 332 is successfully installed
here is the screen shoots
View attachment 5261417
View attachment 5261419
make sure to make backup if you did not make any backup then you will lose your imei and some sensors might stop working
best of luck
if you did not make backup then restore persist.img from your rom folder
and for modem partition restore NON-HLOS.bin from your rom folder
if anything goes wrong let me know i will help you
Click to expand...
Click to collapse
Interesting How did u get that method way?
because i have used it more than 7 times to install different roms
mrgreapes said:
i know how to install 332 you have to carefully follow my steps
First Of fall Before flashing you need to make a backup of
Persist
And
Modem Partition
For That
follow this tutorial
Once Done
Follow the next Instructions
This Is The FireHorse Configuration you need
View attachment 5261385
Now In Meta Build Select 332 content.xml
and flash
After Flash you will boot into Crash Dump Mode
Keep your phone connected with pc and hold power button as soon as you hear the sound of disconectivity hold both volume up and down button
you will boot into edl again
in Qfil Flat Build Go to tools select Partition Manager
in Partition Manager
Find Persist
View attachment 5261405
Right Click on persist and Click On Manage Partition And Click On Erase First Then Click On Load Image And Load The Persist File You Backed Up before flashing
And Do The Same For modem Partition and Load your modem partition which you backed up before flashing when done simply restart your phone by holding power button and wola 332 is successfully installed
here is the screen shoots
View attachment 5261417
View attachment 5261419
make sure to make backup if you did not make any backup then you will lose your imei and some sensors might stop working
best of luck
if you did not make backup then restore persist.img from your rom folder
and for modem partition restore NON-HLOS.bin from your rom folder
if anything goes wrong let me know i will help you
Click to expand...
Click to collapse
hi guys , how did you do the backup of the persist and the modem ? i mean i tried with the tutorial but i need the emmc file for the firehose or i dont know what file i have to use , when i use the tutorial file i have the " download fail" error by the qfil
kh_daisuke said:
hi guys , how did you do the backup of the persist and the modem ? i mean i tried with the tutorial but i need the emmc file for the firehose or i dont know what file i have to use , when i use the tutorial file i have the " download fail" error by the qfil
Click to expand...
Click to collapse
you have to use the downloaded firmware files to go into file manager
i could it ! but i have the camera problem , how can i fix it ?
kh_daisuke said:
i could it ! but i have the camera problem , how can i fix it ?
Click to expand...
Click to collapse
i did , i had to re calibrate in the development option , now everything is working ( less the fingerprint) but with the chinese rom i lost one of the sims , now both are working
kh_daisuke said:
i could it ! but i have the camera problem , how can i fix it ?
Click to expand...
Click to collapse
have you recovered you persist and modem [email protected]
-----------------------------------------------------------------------
Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on each approximataley 15-20 seconds.
----------------
Must have tools:
----------------
1.libusb-win & mtk-bypass:
12.52 MB file on MEGA
mega.nz
2.spflash tool (v5 or the latest on no problem)
SP Flash Tool v5.1924 - Download SmartPhone Flash Tool
SP flash tool download - SP Flash Tool v5.1924 is the latest version that can flash Stock ROM, Custom recovery for your MTK based android phone. SPFLASH tool comes as free-ware.
spflashtool.com
3.mediatek driver:
MediaTek_USB_Drivers.exe | by Droidwin for Misc. Software & Hardware Resources
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
4.Install MediaTek USB VCOM Drivers (If required)
5.stock firmware redmi 6A:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
or
Download Redmi 6A (cactus) V11.0.9.0.PCBMIXM MIUI 11 Stable Full Rom | XiaomiROM.com
The Stable update V11.0.9.0.PCBMIXM has been officially released for Redmi 6A (codename is cactus). Before updating, please make sure you have …
xiaomirom.com
download and extract, from tgz file u will produce another comppressed file, just extract it once again.
6.auth file
Sp flashtool authentication file!
HIT THE THANKS BUTTON Newer MTK (mediatek) devices usually request for an AUTHENTICATION CERTIFICATE TO FLASH.. here am sharing the file i have.. i have used it on two different phones.. makes me think it can work even on most devices out there...
forum.xda-developers.com
------------------
How to:
------------------
zero step:
----------
dissembler the back case of your phone. Disconnect the battery connector from motherboard. (if you have any difficulty to open the back case, just see it in youtube)
1st step:
-----------
open up spflash tool as Administrator and prepare it beforehand (later on in third step you must quickly switch the app in order to flash the device successfully).
Make sure to fill out the three inputs in download section tab:
-DA (download agent) if it already filled, then just leave it. if not, you must refer it to DA agent files inside your spflash tool folder. You could download seprately DA file from internet.
-fill up scatter file from stock firmware Rom.
Important ! Dont move or change the scatter file position in firmware folder! It must be inside the firmware folder!
-auth file ( point it out to the auth file)
-now just leave this app open, head onto 2nd step below!
2nd step:
------------
run: libusb win32.exe:
Tick on Install a Device Filter and Tap Next
-install libusb
-select install a device filter
-Press Volume Up (or down in another model)
-Insert the USB cable
-Now you can see the device’s COM Port in the LibUSB window, Click Install.
Click OK (tips: quickly click the device when it appeared!).
if u failed, just repeat the 2nd step again!
3rd step:
---------
-Run MTKbypassv4.exe
-Press Volume Up (other device use vol down thoug)
-Insert the USB cable into pc
-press bypass button in app
-make sure all ok/done (green color text)
-now quickly go to spflash app, click download button
eventually spflash will execute flashing the device, wait till it finish (download ok!)!
now try to connect the battery connector and boot it up
Voila, your hardbrick phone has come to life once again!
IMPORTANT!:
here in 3rd step, you would have BROM error (This error clearly means that the Flash Tool has issues finding the COM port on which your device is connected.) if u didnt quick enough to switch to spflash app and click downlod button. If this happen, just resume the 3rd step.
Hi please password to file mtkbypass... Thanks Man
esemokay said:
Hi please password to file mtkbypass... Thanks Man
Click to expand...
Click to collapse
use this:
Tajil said:
use this:
Click to expand...
Click to collapse
use this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have done these steps but it's showing error after flashing in SP flashtool. Please find a solution..
Hariz_mhd said:
View attachment 5878861View attachment 5878863I have done these steps but it's showing error after flashing in SP flashtool. Please find a solution..
Click to expand...
Click to collapse
that error have several indications,
one of them is your emmc nearly damage or have been damage. So, u must change u r emmc.
Try this first:
in your spflash, go to option, in tab general uncheck "storage life cycle check"
After flashing, I'm stuck at mi boot logo. Anyone encounter before?
Pinage said:
After flashing, I'm stuck at mi boot logo. Anyone encounter before?
Click to expand...
Click to collapse
have u tried this version ?
cactus_global_images_V11.0.9.0.PCBMIXM_20200916.0000.00_9.0_global_c0a9fb7059
Pinage said:
After flashing, I'm stuck at mi boot logo. Anyone encounter before?
Click to expand...
Click to collapse
have u tried this version ?
cactus_global_images_V11.0.9.0.PCBMIXM_20200916.0000.00_9.0_global_c0a9fb7059
is this will work on redmi note 7?