Database Info

[GUIDE] Rooting ALCATEL OT-918 (v2.3.6)

Hello everybody,
This is just a small guide I made for rooting ALCATEL OT-918 (Maybe also 918D or M) devices on which SuperOneClick fails. Most of the files are not by me so all credit goes to the original author...
Tutorial:
01) Unzip usb_driver.zip and install the drivers. (phone shall not be off an plugged in, thx dbask)
02) Copy the file Superuser-3.0.7-efghi-signed.zip to the root of your SD card.
03) Make sure your battery is fully charged and turn off your phone.
04) Head to the directory SP_Flash_Tool_v2.1134.00 and start FlashTool.exe.
05) Make sure the menu Options->USB Mode is checked.
06) Use attached scatter file creator to make scatter. (or use Android_2.3.6_MT6573_Android_scatter_918.txt)
Warnings/Errors like this can be safely ignored:
Code:
[Warning Hint] Get BMT block count fail, default BMT block count is used!
Code:
[Hint] Bootloader files are lost when automatically loading by scatter file.
Code:
Please make sure you want to go through anyway.
Code:
DSP_BL is unchecked, which may result in a boot failure
07) Check the entry with name "RECOVERY" and double click it.
08) Select the recovery.img file and again make sure ONLY one entry is checked.
09) Click the Download button and plugin your phone with the USB cable.
* Wait some time (untill the recovery file is loaded to your phone) *
10) Unplug your phone and press the volume up and power button at once
11) Select "Flash Zip from SDCard" and choose the Superuser-3.0.7-efghi-signed.zip
12) Confirm the update and reboot your phone. Everything should be done, phone is rooted!
Actual tutorial made by others. I only try to make it a bit more clear.
Screenshots:
FlashTool:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
File selection:
Root verification:
ALCATEL Scatter Retriever v0.1
Just to make this thread a little development related: I coded a tool that should be able to automatically create scatter files for your (ALCATEL) device. It is only tested on my own device but it should work for other (ALCATEL) devices too (Sources can be posted if needed).
Screenshot:
Last words
The tools and files used to make this tutorial are not created by me. The FlashTool is made by MediaTek (the company that makes the ALCATEL devices), the recovery.img is made by somebody at 592zn, the USB Drivers are made by MediaTek/Alcatel (unsure).
I wish you all a very plesant day,
Mr. eXoDia

Original ROM for Alcatel OT-918
Is it possible that I get the original ROM for Alcatel OT 918? Please upload for me or give me the link

This is a backup from my system.img and boot.img: http://mediafire.com/?c0hxpmustzrcav2
Sent from my ALCATEL ONE TOUCH 918 using xda app-developers app

Missing nandroid.md5
Tried to restore using the images and it says missing...nandroid.md5...can u please help me with that file.It is a small file.
Otherwise thanks alot.

ok,
file should be attached

Is there something I am missing?
Thanks for your prompt replies..
I am very grateful...It was successful in restoring but it doesn't boot...it shows the logo then goes to a blank screen.
By the way I have Alcatel OT-918(without D/M/N) running Android 2.3.6.
Is there something that I should do before of after the restore?
I have tried with wiping the cache/data/dalvik cache before restore & after .
I give it alot of time but it doesn't seem to boot.
Is it possible that you give me the data and cache files too.Please......that is if it is possible..
Thanks alot

kippsoft said:
Thanks for your prompt replies..
I am very grateful...It was successful in restoring but it doesn't boot...it shows the logo then goes to a blank screen.
By the way I have Alcatel OT-918(without D/M/N) running Android 2.3.6.
Is there something that I should do before of after the restore?
I have tried with wiping the cache/data/dalvik cache before restore & after .
I give it alot of time but it doesn't seem to boot.
Is it possible that you give me the data and cache files too.Please......that is if it is possible..
Thanks alot
Click to expand...
Click to collapse
download the One Touch Upgrade software from here: http://www.alcatelonetouch.com/ph/products/andorid_smartphones/ot-918.html to reinstall your OS
to root, use this:
http://forum.xda-developers.com/showpost.php?p=27178532&postcount=16

Device is upto date and exits
I did that and it says there is no other later version than the one already install on your device and it exits.
Is there anything else I can do?
Thanks

@kippsoft: Sorry, but I cannot give my data and cache... it contains private stuff such as contacts, emails, password and all stuff like that... nothing more to do I guess

@ mr.expdia: I am very very grateful
I am very gratefull for all that you have one to me.Your time spend and assistance is highly appreciated.
Thanks alot.
But said those images were for Alcatel OT-918?Please confirm that?
I thought those were images before you used your phone...it is okay.
And do you have any working custom rom for 2.3.6? Most of the available are for 2.3.5.
Though my problem is not solved...I have learn alot and that is exactly what I wanted when I joined xda.
Thanks to all.:good:

They are captured while rooting my phone, so yes. And I do not have a custom rom, I think you need to wait for one to be created.
Greetings

kippsoft said:
I did that and it says there is no other later version than the one already install on your device and it exits.
Is there anything else I can do?
Thanks
Click to expand...
Click to collapse
i used this twice and installed the same version OS and was successful both times.

bricked
i have briked my phone after wipe data ... boot to blackscreen.... i know how fix but my internet sucks ....
there a another way to fix..
and also two months ago i maked a nandroid backup... im tryng to restore ...but boot to blackscreen again.
sorry for the english

@lelolenda
Can you open the backup and tell me the images that are there...

@kippsoft
boot...data...system

@lelolenda
cache and dalvik cache missing...
Which make do you have...?
Do you have the scatter file for your phone..?

kippsoft said:
cache and dalvik cache missing...
Which make do you have...?
Do you have the scatter file for your phone..?
Click to expand...
Click to collapse
i dont have dalvik cache and cache!!! but a cache backup a have in another PC broken.
and yes i have scatter file for my phone.

oldsap said:
i used this twice and installed the same version OS and was successful both times.
Click to expand...
Click to collapse
Same problem was with me too. But my phone was in warranty so I got it to service center and now it will be replaced with a new one. Hey XDA Guys is there anyway we can prevent this thing? Even I did wipe all data and the phone just booted till screen where Android image comes and then restart.

HellRocker™ said:
Same problem was with me too. But my phone was in warranty so I got it to service center and now it will be replaced with a new one. Hey XDA Guys is there anyway we can prevent this thing? Even I did wipe all data and the phone just booted till screen where Android image comes and then restart.
Click to expand...
Click to collapse
Just use One Touch for alcatel users to fix it. It takes much time anyway.

reachwei said:
Just use One Touch for alcatel users to fix it. It takes much time anyway.
Click to expand...
Click to collapse
Thanks for suggestion buddy. now i know it already. nandroid backup would also work

[Guide] Android Star B92M CWM + 2.5G DATA + ROOT

First of all, all props goes to the OP of this thread. This is merely a step-by-step detailed guide on the process since there were a lot of members complaining that the steps were unclear.
- Download the following and extract all the files:
MT6577 USB VCOM drivers (link: http://www.mediafire.com/?2sf30pboet4qvov)
SP Flash Tool v3.1224.01.rar (link: http://www.mediafire.com/?h68v8yhhtci8h0e)
CWM-ROOT-B92M.zip (link: http://www.mediafire.com/?8o2yx9ssz1abwon)
2.5gb-data-perm-root.zip (link: http://www.mediafire.com/?4wg5f6rgat8qdrt)
- Install the MT6577 USB VCOM drivers drivers
- Inside the 2.5gb-data-perm-root folder make sure the files have the following names (CASE SENSITIVE!):
recovery.img
EBR1.img
boot.img
logo.img
MBR.img
preloader.img
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Turn off your phone and unplugg the USB cable
- Start SP Flash Tool
- Under options in the menubar check "USB mode"
- Under File in the menubar click on "Open scatter-loading file" and select MT6577_Android_scatter_emmc.txt from the CWM-ROOT-B92M folder
- Double click the following rows inside SP Flash Tool:
PRELOADER and select preloader.img (from 2.5gb-data-perm-root folder)
MBR and select MBR.img (from 2.5gb-data-perm-root folder)
EBR1 and select EBR1.img (from 2.5gb-data-perm-root folder)
BOOTIMG and selet boot.img (from 2.5gb-data-perm-root folder)
RECOVERY and select recovery.img (from 2.5gb-data-perm-root folder)
LOGO and select logo.img (from 2.5gb-data-perm-root folder)
You should have the following then:
- Click on "Download" inside SP Flash Tool
- Take out the battery of the phone
- Put the battery in
- Connect USB cable with your computer
- The bar at the bottom of SP Flash tool should go to 100% a few time and present you with a green circle when done
- Done flashing, hit volume up + power to start up CWM and make a backup
I hope this detailed guide helps everyone out
~Whookid
Disclaimer: Messing around with your phone can be fun but can also cause damage to your phone. I am in no way responsible for anything that you do. I am merely sharing what I managed to do.

Red triangle
Hi, i cant get to the recovery mode...
I press Power und volume up but there is just the Android with a red triangle.
Can you help?

What ROM can you use with this ?

Some of the files are named a little bit differently, but overall pretty much straightforward steps thanks to the guide above.

first thanks for the guide!!!
but u should add this to make root working
http://forum.xda-developers.com/showpost.php?p=33990331&postcount=75

I did not have to do that. I simply added a Google account, started the Google Play Store and it told me there was an update for "superuser".
Did the update, rebooted and done!
Sent from my B92 using Tapatalk 2

Whookid said:
I did not have to do that. I simply added a Google account, started the Google Play Store and it told me there was an update for "superuser".
Did the update, rebooted and done!
Sent from my B92 using Tapatalk 2
Click to expand...
Click to collapse
maybe it was not there cause i did not the wipe data/factory... xD
but now when i do it its there

bonecrusher2010 said:
Hi, i cant get to the recovery mode...
I press Power und volume up but there is just the Android with a red triangle.
Can you help?
Click to expand...
Click to collapse
Did the flashing went ok (Green circle at the end?)
********er said:
What ROM can you use with this ?
Click to expand...
Click to collapse
Any ROM that you can find that is compatible with the Star B92M.
steelburn said:
Some of the files are named a little bit differently, but overall pretty much straightforward steps thanks to the guide above.
Click to expand...
Click to collapse
Yeah, to avoid confusion I made everyone rename the files according to the first post.
android_xcuj28 said:
maybe it was not there cause i did not the wipe data/factory... xD
but now when i do it its there
Click to expand...
Click to collapse
Ok good to know, thanks for the input

Broken touch screen Star B92m
i broke the touch screen of B92m
Where can i find new one and how can i change it?

andys312 said:
i broke the touch screen of B92m
Where can i find new one and how can i change it?
Click to expand...
Click to collapse
Your best option is to contact the seller and ask him for more information about this.

After flashing with 2.5GB ROM, I have issue with my camera: it detects 80MB partition as the SDcard partition.
Anyone know how to change this? Or.. which file should I look for to change the camera save location?

Make sure you have an external sd-card inserted in the phone. It should automatically be mounted to /sdcard/ where you should have enough space to store your camera photos.
Sent from my B92 using Tapatalk 2

What charger are you using and how fast/slw will it charge a empty battery?
Mine takes for ever (8hrs from 0%), the charger fastcardnet send me, but also a standard usb charger i got.

I'm just using the default micro USB chargers I have laying around. I never charge via a computer (USB) though.
Sent from my B92 using Tapatalk 2

@Whookid
Yes worked!

Hi,
I have followed this guide but I didn't get root access.
I also wiped data and did the factory reset but there is no superuser...
What do I have to do now?
And I have another question: What do I need to do to go to the Internet by connecting to my Laptop (in it's function as a Wifi-hotspot) and using his wired-internet-connection? I only got it by Ad-Hoc but it seems that this doesn't work anyway...
Thx,
bvb09kingz

bvb09kingz said:
Hi,
I have followed this guide but I didn't get root access.
I also wiped data and did the factory reset but there is no superuser...
What do I have to do now?
And I have another question: What do I need to do to go to the Internet by connecting to my Laptop (in it's function as a Wifi-hotspot) and using his wired-internet-connection? I only got it by Ad-Hoc but it seems that this doesn't work anyway...
Thx,
bvb09kingz
Click to expand...
Click to collapse
Try flashing again and Superuser should be working. Once flashed I suggest you start the play store and you'll see that there is an update available.
About the Wi-fi: that's something computer related so don't know for sure about that one. I just Googled and came across this website:
http://www.connectify.me
Sent from my B92 using Tapatalk 2

steelburn said:
After flashing with 2.5GB ROM, I have issue with my camera: it detects 80MB partition as the SDcard partition.
Anyone know how to change this? Or.. which file should I look for to change the camera save location?
Click to expand...
Click to collapse
I have the same problem, how did you fix it?
I had a 2.5 GB space on my Internal SD Card before I do this root, now it is 83 MB, I could try a factory reset but I still need the rooting so I will run into this problem again.

Amjadov said:
I have the same problem, how did you fix it?
I had a 2.5 GB space on my Internal SD Card before I do this root, now it is 83 MB, I could try a factory reset but I still need the rooting so I will run into this problem again.
Click to expand...
Click to collapse
read this... i also got the same problem
http://forum.xda-developers.com/showpost.php?p=33990331&postcount=75

android_xcuj28 said:
read this... i also got the same problem
http://forum.xda-developers.com/showpost.php?p=33990331&postcount=75
Click to expand...
Click to collapse
When I first did the root I did not the su.zip step so I booted my phone and it informed me that my internal SD card is damaged amd asked me if I wanted to format it, I clicked yes and then it became 83 MB, I did the root again and flashed su.zip too, I also tried to format the internal SD card but it is still 83 MB.
I think I need to reformat with specifying the new size, how can I do that?

[GUIDE] How to Downgrade / Unbrick /Flash Stock Firmware Nokia 5.1 Plus.

This guide is for downgrading /Unbrick /Flash Stock Firmware Nokia 5.1 plus to Android Pie or Oreo.
This is STRICTLY for Global Nokia 5.1 plus variant NOT for Chinese variant Nokia X5. If you want to downgrade Chinese variant then follow this guide by hikari_calyx
Guide For Chinese Variant (X5).
What you need ::
1.MTK- Smart Phone Flashing tool which can be downloaded here. (v5.1804) Download
2.Android platform tools and ADB and fastboot drivers . Download
3. MTK Port drivers , For windows only. Download
4.FIRMWARE -
Oreo - PDA-1100-0-00WW-B01_unpacked.7z from . Download
Pie - PDA-214A-0-00WW-B01.full.zip from here . Download
STEP 1 : Backup your important files from internal storage and remove all google accounts from your phone to prevent FRP lock.
STEP 2 : Install all drivers and files mentioned above and extract your desired Firmware .
STEP 3 : Create a full backup using SP Flash tool (must do).
Open Smart Phone Flash Tool, choose the Download Agent file and Scatter File from the unpacked firmware.
DO NOT USE DOWNLOAD AGENT FROM THE FLASH TOOL ITSELF, USE ONLY THE ONE PROVIDED IN THE FIRMWARE.
Should look like this-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TROUBLESHOOTING.
If you get this error
Then go to options and disable "Check LIB DA Match".
Click to expand...
Click to collapse
Then move to "Readback" and tap on add and choose you location where you want save you backup after that you double click on the created readback section and you will see this :
Use any text editor to open the scatter file from extracted firmware , and find "userdata". You'll need the start address of userdata as the length of the full backup.
And change the length from the address you found under "userdata" in scatter file like this and tap ok.
Click on "Readback" and the connect you phone in flashing mode with both volume button pressed and release upon the readback process starts ( you can see it in the lower progress bar).
STEP 4 : Upon completion of the readback process , close SP Flash tool and unplug you phone and trigger it to fastboot mode and change your Active partition to "a" by this command.
Open cmd to use this command.
Code:
fastboot --set-active=a
After this process completes , power off you phone .
STEP 5 : Flashing your firmware.
Open SP Flash Tool and check that DA and Scatter is loaded from your extracted Firmware.
Choose "DOWNLOAD ONLY" mode , not any other or you will loose important partitions.
Then click on download and connect your phone in flashing mode by both volume button pressed and release upon the download process starts ( you can see it in the lower progress bar).
After its finished, it will show "Download OK" popup.
Now just close SP Flash tool , unplug you phone and reboot.
Enjoy your downgraded/ Unbricked Nokia 5.1+.
Special thanks to :
hikari_calyx for Firmware and solving all the errors.
Someone , Someone and Someone for testing this guide.
Hit Thanks if it worked for you.

Tested, guide works perfectly. Also, the given Android version in this guide is 9 (February SP) for those who want to know.

For some reason, the wifi doesn’t work for me, it just falls off and connects again (how to fix it?

Pelmewek said:
For some reason, the wifi doesn’t work for me, it just falls off and connects again (how to fix it?
Click to expand...
Click to collapse
Check your imei and baseband...is it there???

Readback not processing
Cant compltete the readback prccess what should i do?

xdriv3r said:
Cant compltete the readback prccess what should i do?
Click to expand...
Click to collapse
Which version of SP flash tool are you using ??

bx2_nero said:
Which version of SP flash tool are you using ??
Click to expand...
Click to collapse
I used the latest version. I'm going to try again with the recommended version. Thank you .

xdriv3r said:
I used the latest version. I'm going to try again with the recommended version. Thank you .
Click to expand...
Click to collapse
Use Sp flash tool version 5.1804 or 5.1824.
Read the instructions carefully ..

How to backup using sp flashtool?
How to backup using sp flashtool?
bx2_nero said:
Use Sp flash tool version 5.1804 or 5.1824.
Read the instructions carefully ..
Click to expand...
Click to collapse

xdriv3r said:
How to backup using sp flashtool?
Click to expand...
Click to collapse
You must backup your personal data and remove Google account before starting.
The readback process is the backup process in SP flash tool.

Android 10 firmware not available
bx2_nero said:
Pie-PDA-214A-0-00WW-B01.full.zip from here https://androidfilehost.com/?fid=1899786940962585502 (recommended if you are downgrading to root and install Androdi 10).
Click to expand...
Click to collapse
Alas, no mirror found:

mll2 said:
Alas, no mirror found:
Click to expand...
Click to collapse
https://tpedutw-my.sharepoint.com/:...dFks--5G6V4vYBGTwLw1BsthbtIuJqMUN3tQ?e=wOfytH
Try from here
Make sure you download the file mentioned.
PDA_214A_0_00WW_B01_full

bx2_nero said:
https://tpedutw-my.sharepoint.com/:...dFks--5G6V4vYBGTwLw1BsthbtIuJqMUN3tQ?e=wOfytH
Try from here
Make sure you download the file mentioned.
PDA_214A_0_00WW_B01_full
Click to expand...
Click to collapse
Thank you!

I tried downgrading from Android 10 Internal Beta and cannot skip the update screen on reboot. How to fix this?

xdriv3r said:
I tried downgrading from Android 10 Internal Beta and cannot skip the update screen on reboot. How to fix this?
Click to expand...
Click to collapse
Did you follow step 1 - remove Google account to prevent FRP Lock.
Try hard resetting, reset from recovery.

bx2_nero said:
Did you follow step 1 - remove Google account to prevent FRP Lock.
Try hard resetting, reset from recovery.
Click to expand...
Click to collapse
It's just one compulsary update. Around September 2019 sp. I'm good now. I thought I had hardbricked the device when I changed primary partition to b and got stuck in bootloop unable to go into recovery. Then I used volume down + power and usb to directly get into fastboot.

xdriv3r said:
It's just one compulsary update. Around September 2019 sp. I'm good now. I thought I had hardbricked the device when I changed primary partition to b and got stuck in bootloop unable to go into recovery. Then I used volume down + power and usb to directly get into fastboot.
Click to expand...
Click to collapse
Why did you changed your primary partition to B.

bx2_nero said:
Why did you changed your primary partition to B.
Click to expand...
Click to collapse
I'm noob.

xdriv3r said:
I'm noob.
Click to expand...
Click to collapse
Your phone is fine right now?

bx2_nero said:
Your phone is fine right now?
Click to expand...
Click to collapse
Yeah now on feb sp with mtksu and suboot.

Error after update firmware

no one has encountered such an error when updating to firmware
L79031_ROW_SECURE_USER_Q00114.1a_Q_ROW_12.0.332_ST_210202_qpst.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How did you get the update? Did you install it yourself from the rescue application. Or did you upload with q file

I uploaded with QPST_2.7.496.zip

LeshaRB said:
I uploaded with QPST_2.7.496.zip
View attachment 5236277View attachment 5236279View attachment 5236281View attachment 5236283View attachment 5236285
Click to expand...
Click to collapse
go to edl mood by holding volume up and volume down button when restarting phone
now use flat build instead of meta build

mrgreapes said:
go to edl mood by holding volume up and volume down button when restarting phone
now use flat build instead of meta build
Click to expand...
Click to collapse
Can you help?
What I must choose in RawProgramm & Patch??
I have such rawprogramm
"rawprogram_unsparse0.xml"
"rawprogram_unsparse0_retain_userdata.xml"
"rawprogram1.xml"
"rawprogram2.xml"
"rawprogram3.xml"
"rawprogram4.xml"
"rawprogram5.xml"
And patch
"patch0.xml"
"patch1.xml"
"patch2.xml"
"patch3.xml"
"patch4.xml"
"patch5.xml"

mrgreapes said:
go to edl mood by holding volume up and volume down button when restarting phone
now use flat build instead of meta build
Click to expand...
Click to collapse
II tried to reflash to FlatMode and again the CrashDump error
May be problem in - Erase all before download?

LeshaRB said:
Can you help?
What I must choose in RawProgramm & Patch??
I have such rawprogramm
"rawprogram_unsparse0.xml"
"rawprogram_unsparse0_retain_userdata.xml"
"rawprogram1.xml"
"rawprogram2.xml"
"rawprogram3.xml"
"rawprogram4.xml"
"rawprogram5.xml"
And patch
View attachment 5237811
"patch0.xml"
"patch1.xml"
"patch2.xml"
"patch3.xml"
"patch4.xml"
"patch5.xml"
Click to expand...
Click to collapse
chose
rawprogram_unsparse0
then 1 2 3 4 5
select the patch files from 0 to 5

mrgreapes said:
chose
rawprogram_unsparse0
then 1 2 3 4 5
select the patch files from 0 to 5
Click to expand...
Click to collapse
do not chose both rawprogram_unparse0 files

LeshaRB said:
II tried to reflash to FlatMode and again the CrashDump error
May be problem in - Erase all before download?
View attachment 5237833
Click to expand...
Click to collapse
settings are ok

LeshaRB said:
II tried to reflash to FlatMode and again the CrashDump error
May be problem in - Erase all before download?
View attachment 5237833
Click to expand...
Click to collapse
if still in crash dump mood then switch your mobile into edl mode go to tools in qfil tool click on file manager select persist partition erase it then click on load and chose the persist partition from your rom folder also delete "modem" partition and load NON_HLos.bin from your rom files folder and then turn on your phone

mrgreapes said:
if still in crash dump mood then switch your mobile into edl mode go to tools in qfil tool click on file manager select persist partition erase it then click on load and chose the persist partition from your rom folder also delete "modem" partition and load NON_HLos.bin from your rom files folder and then turn on your phone
Click to expand...
Click to collapse
in this case you are gonna lose your imei then you have to restore it using qcn file

i have found a solution for those who have lost imei after flashing or for those who want to change imei
here is the link to qcn file Enjoy i have removed my imei from it you can add yours by using this tool : https://mega.nz/file/LixWmY5T#ki4MXHtf0XKNovI7Iz3DQ8o2inrIPc3aTDgrwE_WpcI
QCN : https://mega.nz/file/yypwHQLC#96sIs97z_nkOSyn8U7U-1bRikrk1ipBDt2HFcXb1sLY
use the below guide to restore imei and everything you have lost : https://forum.xda-developers.com/t/guide-backup-edit-and-restore-qcn-fixing-lost-imei.4101611/

mrgreapes said:
i have found a solution for those who have lost imei after flashing or for those who want to change imei
here is the link to qcn file Enjoy i have removed my imei from it you can add yours by using this tool : https://mega.nz/file/LixWmY5T#ki4MXHtf0XKNovI7Iz3DQ8o2inrIPc3aTDgrwE_WpcI
QCN : https://mega.nz/file/yypwHQLC#96sIs97z_nkOSyn8U7U-1bRikrk1ipBDt2HFcXb1sLY
use the below guide to restore imei and everything you have lost : https://forum.xda-developers.com/t/guide-backup-edit-and-restore-qcn-fixing-lost-imei.4101611/
Click to expand...
Click to collapse
just add your imei using this above mentioned software then dial
*#*#33284#*#*
you will see a menu
click on qmi test
you will see a port with the name of 901D or 91D in qfil tool then just go to tools backup and restore qcn enable multi sim option and restore the qcn file i have provided after this your fingerprint + y triggers are gonna stops working but everything else is going go work fine do at you own risk

mrgreapes said:
do not chose both rawprogram_unparse0 files
Click to expand...
Click to collapse
Hello, I had the same problem and I did the same explanation on my phone, but it was stopped on the black screen. It does not work and does not respond to the computer. Is there a solution??

Xiaomi Redmi Note 7 pro nv data is corrupted

Hello all,
my phone is redmi note 7 pro - violet_china_images_V11.0.5
I restored by mistak the wrong file R.qcn by QPST Flash Tool
when I restarted the phone I got an error nv data is corrupted and still hangs on black screen with this error.
I tryed to inistall the china and india offical recovery rom in the FastBoot Mod but the problem is still
Does anyone have any ideas how I can solve this problem?
Thanks for all.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

kinghacker02 said:
Hello all,
my phone is redmi note 7 pro - violet_china_images_V11.0.5
I restored by mistak the wrong file R.qcn by QPST Flash Tool
when I restarted the phone I got an error nv data is corrupted and still hangs on black screen with this error.
I tryed to inistall the china and india offical recovery rom in the FastBoot Mod but the problem is still
Does anyone have any ideas how I can solve this problem?
Thanks for all.
Click to expand...
Click to collapse
The image is broken.

kinghacker02 said:
Hello all,
my phone is redmi note 7 pro - violet_china_images_V11.0.5
I restored by mistak the wrong file R.qcn by QPST Flash Tool
when I restarted the phone I got an error nv data is corrupted and still hangs on black screen with this error.
I tryed to inistall the china and india offical recovery rom in the FastBoot Mod but the problem is still
Does anyone have any ideas how I can solve this problem?
Thanks for all.
Click to expand...
Click to collapse
Flash the proper QCN file.

kinghacker02 said:
Hello all,
my phone is redmi note 7 pro - violet_china_images_V11.0.5
I restored by mistak the wrong file R.qcn by QPST Flash Tool
when I restarted the phone I got an error nv data is corrupted and still hangs on black screen with this error.
I tryed to inistall the china and india offical recovery rom in the FastBoot Mod but the problem is still
Does anyone have any ideas how I can solve this problem?
Thanks for all.
Click to expand...
Click to collapse
This is the Indian varient OCN File.

Kenora_I said:
This is the Indian varient OCN File.
Click to expand...
Click to collapse
how to QCN File Proper Flash error show
plzzzz Help

THAT WAS A TWRP BACKUP!

Restore it dont flash it...

proper restore QCN File but still hangs on black screen and power off

Then reflash the OS after it

Kenora_I said:
Then reflash the OS after it
Click to expand...
Click to collapse
Same problum sir
Kenora_I said:
Then reflash the OS after it
Click to expand...
Click to collapse

tyler200298 said:
mine solution can revive phone but at the end pf process u still have a corrupted imei but maybe we can modify efs1.emmc.win and efs2.emmc.win to restore modemst1 e modemst2 (through hex editor maybe). Or root again with magisk or changing device to DIAG mode and flash with qpst (but with this i had no luck).
what do u need:
twrp image for xiaomi (find it here )
minimal adb and fastboot archive (here )
EFS backup from a working redmi note 8 (download from here)
1) first of all we have to put phone in fastboot mode pressing POWER button and VOLUME DOWN till phone restarts and show mi-rabbit
2) put downloaded twrp image in same folder with adb and rename it twrp.img
3) connect phone to PC through USB and navigate to folder "minimal adb and fastboot", here double click on cmd-here.exe or press shift + right click mouse and click on open powershell here or open command prompt here.
4) digit fastboot flash recovery twrp.img
5) press POWER BUTTON and VOLUME UP till u see redmi logo then left power button and still hold volume up
6) now u are on twrp recovery, PC now recognize phone like mass storage and u have to copy and paste EFS folder decompressed (without subfolders) on "TWRP" folder inside phone
7) on twrp click on "RESTORE" tab and choice "EFS" folder then swipe to restore
Wait till phone restart and configure it
Click to expand...
Click to collapse
Find an EFS backup.

phone is done but iemi unknown baseband version unknown

kinghacker02 said:
phone is done but iemi unknown baseband version unknown
Click to expand...
Click to collapse
I can repair it

Kenora_I said:
The image is broken.
Click to expand...
Click to collapse
Flash this efs file and your problem will be solved

Shahbaz9806150 said:
Flash this efs file and your problem will be solved
Click to expand...
Click to collapse
password please

saifisolutions said:
password please
Click to expand...
Click to collapse
password