touch response cm10.2 after call - Samsung Galaxy Ace Plus S7500

guys I HV been facin this issue from many cm version..presently I am on 10.2.vickygcoolest ROM...
actually after completing call I cannot click cancel... I mean it fails to response ...the call keeps going on...it takes number of tries. 7-8 times to cancel call from our side..
also can proximity sensor be disabled..??

trendchanger said:
guys I HV been facin this issue from many cm version..presently I am on 10.2.vickygcoolest ROM...
actually after completing call I cannot click cancel... I mean it fails to response ...the call keeps going on...it takes number of tries. 7-8 times to cancel call from our side..
also can proximity sensor be disabled..??
Click to expand...
Click to collapse
lol..even i was goin to ask the same in the forum:silly: happens with me too in cm 10.0

Androidoo said:
lol..even i was goin to ask the same in the forum:silly: happens with me too in cm 10.0
Click to expand...
Click to collapse
you both can try use catlog and take logcats then see if there is any issiues with prox related things

Related

Continuos vibration..draining battery

I am using Dutty's 6.1 hybrid Rom. But a major problem is with the vibration. I have selected Vibrate and ring and then the phone vibrates continiously with the ringtone. When it was with the Stock rom the phone didn't vibrate constantly. This is eating a lots of battery ...Pls pls find some way to STOP this.
BTW- Pls don't say that i have to select vibrate then ring option.
When you have it set to vibrate and ring please look at and post the contents of the following registry key:
HKCU\ControlPanel\Sounds\RingTone0
list all values and data
thx
Also make sure you understand the expected behavior:
Vibrate AND ring will mean it will play the ringtone and vibrate all through the ring tone.
Vibrate THEN ring will mean it will vibrate once for a few seconds then play the ringtone.
Which one have you selected and explain what you think it is doing that is not normal....
I think he may be talking about its a constant vibrate rather than a pulsing vibrate, mine does the same thing. I'll get those values here in a minute.
My kaiser sometimes won't stop vibrating after receiving an email(not on sms).
This started to happen after installing no thrills. When i press the power button until the dialog to shutdown appears, and press no the vibrations stop. The only real annoyance is when there is an email in the middle of the night.
ithehappy said:
I am using Dutty's 6.1 hybrid Rom. But a major problem is with the vibration. I have selected Vibrate and ring and then the phone vibrates continiously with the ringtone. When it was with the Stock rom the phone didn't vibrate constantly. This is eating a lots of battery ...Pls pls find some way to STOP this.
BTW- Pls don't say that i have to select vibrate then ring option.
Click to expand...
Click to collapse
Hi,
Maybe this can help:
check reg: HCU - ControlPanel - sounds - RingTone0 - Script
a = activate
V = Vibrate
P = play sound
w= wait
r= repeat
maybe you have something like: avr
You should have something like: av2pw2r
This way you tell the device to activate, then vibrate, then play ringtone, then wait for 2 seconds, the repeat the instruction...
cheers
liquidfork said:
I think he may be talking about its a constant vibrate rather than a pulsing vibrate, mine does the same thing. I'll get those values here in a minute.
Click to expand...
Click to collapse
Well let me tell you something...If you can figure out what is causing it and make it an option, I think HTC will get a whole new fan base of twenty something women!!!
I can see the ad now.... "Hey Ladies, HTC Tilt, not only looks good, but feels great in your pocket!!!!!"
ryncppr said:
Well let me tell you something...If you can figure out what is causing it and make it an option, I think HTC will get a whole new fan base of twenty something women!!!
I can see the ad now.... "Hey Ladies, HTC Tilt, not only looks good, but feels great in your pocket!!!!!"
Click to expand...
Click to collapse
LOL
My script shows av0pw3r.
defp said:
My kaiser sometimes won't stop vibrating after receiving an email(not on sms).
This started to happen after installing no thrills. When i press the power button until the dialog to shutdown appears, and press no the vibrations stop. The only real annoyance is when there is an email in the middle of the night.
Click to expand...
Click to collapse
I get this too, but it doesn't happen with every email. I find just hitting the start button stops it, but if I'm not near the phone, it's really annoying and drains the battery.
I'm using Dutty's 19209 rom. Any ideas?
liquidfork said:
LOL
My script shows av0pw3r.
Click to expand...
Click to collapse
That means:
Vibrate(v) continuously(0) and play ringtone(p) for 3 seconds (w3) then repeat(r).
If you don't want continuous vibration, use something like:
av3pw3r
Vibrate(v) 3 seconds (3) and play ringtone(p) for 5 seconds (w5) then repeat(r).
well then....seems as if i have passed on my little problem to you fine people. i've been complain of this for months now. I have hunted dutty down for many hours to fix this but no luck. from what i can tell the issue has to do with sound.
if you notice it only happens when the phone is promoted to play sound...phone call....text...or email. Sometimes (depending on the radio) if you let it sit for a few seconds (we're talking 40 seconds or so) you'll notice the last half secants of the sound will play, then the vibration will stop. Other times or most of the time, the last bit of the sound does not play, so the phone continues to vibrate.
to tell the truth i've been way to lazy to find out what it is that stops he last bit of sound from playing, but trust me when i tell youz...thats the issue.
my quick fix is to FORCE it to play sound. How? just hit the red phone button. That little beep it makes is all you need. once you hit the end button the vibrating is done. it hasn't happen too many times with the newer builds...but it still happens. its a bug i just accepted.
rzanology said:
well then....seems as if i have passed on my little problem to you fine people. i've been complain of this for months now. I have hunted dutty down for many hours to fix this but no luck. from what i can tell the issue has to do with sound.
if you notice it only happens when the phone is promoted to play sound...phone call....text...or email. Sometimes (depending on the radio) if you let it sit for a few seconds (we're talking 40 seconds or so) you'll notice the last half secants of the sound will play, then the vibration will stop. Other times or most of the time, the last bit of the sound does not play, so the phone continues to vibrate.
to tell the truth i've been way to lazy to find out what it is that stops he last bit of sound from playing, but trust me when i tell youz...thats the issue.
my quick fix is to FORCE it to play sound. How? just hit the red phone button. That little beep it makes is all you need. once you hit the end button the vibrating is done. it hasn't happen too many times with the newer builds...but it still happens. its a bug i just accepted.
Click to expand...
Click to collapse
Thank goodness I'm not alone! I've been having this problem on & off for the last 3 months!. And yes your right rzanology its almost like the phone turns off before the end of the alert which trips it out....
dont worry. i wish this bull sht on all of you! and i am confident you will all run into it sometime
but really...it has been alot better with the new builds. im about to call up att and tell them my phone keeps freezing and its affecting business lol...see if they will send me a brand new one.
rzanology said:
dont worry. i wish this bull sht on all of you! and i am confident you will all run into it sometime
but really...it has been alot better with the new builds. im about to call up att and tell them my phone keeps freezing and its affecting business lol...see if they will send me a brand new one.
Click to expand...
Click to collapse
You sure you GF didn't purposely sabotage you device...buzzzzzzz, ohh baby! ;Dirty_Old_Man_Smiley)
this bug can be remove by the rom builder. so i am requesting mr.dutty to solve this problem. hope you understood what we are saying. we just need pulse vibration rather than the constant vibration like the original htc rom.
Thanks.
Solved
ithehappy said:
this bug can be remove by the rom builder. so i am requesting mr.dutty to solve this problem. hope you understood what we are saying. we just need pulse vibration rather than the constant vibration like the original htc rom.
Thanks.
Click to expand...
Click to collapse
Hi,
Did the solution proposed in post #10 work?
Rafael K said:
Hi,
Did the solution proposed in post #10 work?
Click to expand...
Click to collapse
Sorry buddy i don't want to go to reg editor for a simple thing.
Simple straight answer - much to ask for?
ithehappy said:
Sorry buddy i don't want to go to reg editor for a simple thing.
Click to expand...
Click to collapse
If you haven't applied the reg hack, the question clearly was not directed to you. So let me put that again: Can someone who applied the reg hack in post #10 and is not trying to play the smart### confirm to me if it works on his/her device?
In the meantime: I have tried and put av1pw3r (meaning, according to post #10, that the vibration would last 1 second). I sofreset immediately after and confirmed that the hack sticked.
But got the continuous vibration at least once after that. I'm on Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 with the cube.
I have learnt from experience that I could make the vibration stop if I started a call...
I had this problem when I flashed a ROM and kept the older radio to see how it would work. When I updated the radio it went away. Try changing radios it might work for you.
redmercury said:
I had this problem when I flashed a ROM and kept the older radio to see how it would work. When I updated the radio it went away. Try changing radios it might work for you.
Click to expand...
Click to collapse
Hm, nice idea, will try it out

Possible solution to Dialer bug/high current draw/low battery performance.. whatever

Hello, i was reading the android forums of one of the chacha problems.
In comment nÂș300 someone found a possible solution !!!
Could anyone understand how could we try that modification ?!
I can confirm that setting gsm.proximity.enable=false in the build.prob before flashing DOES work!!! AWESOME NEWS!!!
Click to expand...
Click to collapse
I have no permissions to post the link !
Thank you
That disables the proximity sensor.. It doesn't sound that safe, as you could end up ending the call with your ear for example.
Alex C. said:
That disables the proximity sensor.. It doesn't sound that safe, as you could end up ending the call with your ear for example.
Click to expand...
Click to collapse
I think this is useful to evaluate if disabling the proximity sensor changes anything in the battery life !!!
If this works then we must find a way to bypass this !!
I think we could change a config file in \system with this, rooted !
I only don't know which file ...
Meh, don't know man. I'm using a custom ROM without any dialer issues.
Anyway, the file you are looking for is build.prop under /system/.
Alex C. said:
Meh, don't know man. I'm using a custom ROM without any dialer issues.
Anyway, the file you are looking for is build.prop under /system/.
Click to expand...
Click to collapse
I don't understand how could be possible that there are some people that have 3 days of moderate use !!
It's difficult to me exceed the 24hours mark !!!
i dont think its possible either to have 3days with moderate use.... i can barely reach 1 day... but i think its somewhat moderate/hard usage...but again... its a max
musash1 said:
i dont think its possible either to have 3days with moderate use.... i can barely reach 1 day... but i think its somewhat moderate/hard usage...but again... its a max
Click to expand...
Click to collapse
Please read this:
http://forum.xda-developers.com/showpost.php?p=16905065&postcount=40
Yep, disabling the proximity sensor from build.prop does the trick, but I have to manually turn off screen every time I make or receive a call. That has to be a dialer app issue which is calling for sensors even though there is no need for them. Is there a workaround for that? I just need to turn my screen off automatically when making/receiving a call.
can anyone help me to disable the proximity sensor in a completely stock device - not rooted ?

Touch not responds after a long press...check reply #5

P3100(stock rom) Touch not responds after a long press(noticed in games).
Especially in game:Monster Shooter: Lost Levels,sometimes in gta(while driving).
When i long press a button in game after sometime screen do not responds and i have to wait for few seconds...
Pls tell me if anyone have this problem too and any solutions???
Maybe just processor lag? Is the game otherwise smooth? Are you using a screen protector?
Else games are super smooth.no lags at all.yes i am using protector
Can you long-press something else and see if it works normally?
MultipleMonomials said:
Can you long-press something else and see if it works normally?
Click to expand...
Click to collapse
no buddy there is problem...
Try this out:
go to settings.long press any option say display or sounds...
Then it will automatically release the touch(approx 10-15 sec) and screen will not respond to touch for approx 2sec......
Droidlover123 said:
no buddy there is problem...
Try this out:
go to settings.long press any option say dock or software...
Then it will automatically release the touch(approx 10-15 sec) and screen will not respond to touch for approx 2sec......
Click to expand...
Click to collapse
there's no option like that on settings
Rotundjere said:
there's no option like that on settings
Click to expand...
Click to collapse
bro try long pressing any option in settings like display....
Droidlover123 said:
bro try long pressing any option in settings like display....
Click to expand...
Click to collapse
I tried long pressing the software button in the settings and nothing happened. I don't have the same issue. Tried with the galaxy tab 2 10.1 5110. Full stock (not even rooted yet)
This sounds like what my Motorola Photon would do. The fix for the Photon is here.
http://forum.xda-developers.com/showthread.php?t=1469904
It's a rain drop detection "feature". I don' know if this can be ported or not.
frogman74 said:
This sounds like what my Motorola Photon would do. The fix for the Photon is here.
http://forum.xda-developers.com/showthread.php?t=1469904
It's a rain drop detection "feature". I don' know if this can be ported or not.
Click to expand...
Click to collapse
buddy so this mean that rain drop detection feature is inbuilt **** by samsung in my tab???
Droidlover123 said:
bro try long pressing any option in settings like display....
Click to expand...
Click to collapse
mine works fine, seems your device not working properly
Rotundjere said:
mine works fine, seems your device not working properly
Click to expand...
Click to collapse
i too think so...
Pls tell me Did you installed that 64 mb update via ota?

Screen brightness flashes hard!

help!!, I love my S8+, I have 1 problem, when I open the screen it flashes the brightness hard then goes back to the level I chose, please watch the video, it happens exactly as the screen is opened, the bright flash is less than a second but its annoying, tell me if there's a fix.
Try turning off the auto brightness and video enhancer options and let us know if it still persists
they're both turned off
Try turning the AOD off and see if it does the same thing
oh my god the flash stopped once I turned off AOD, but I need AOD on, I hope they fix this, where can I send this issue to Samsung?
pinkbecca said:
oh my god the flash stopped once I turned off AOD, but I need AOD on, I hope they fix this, where can I send this issue to Samsung?
Click to expand...
Click to collapse
Try to update the AOD version u have first
Chuck 3310 said:
Try to update the AOD version u have first
Click to expand...
Click to collapse
its the latest version
who can I contact from Samsung to report this bug for them to fix?
anyone knows who I can report this bug to?
pinkbecca said:
anyone knows who I can report this bug to?
Click to expand...
Click to collapse
in every Samsung app press on the 3 Dots and click "contact us" there you can report your bug....

Question Microphone not working well

I use the Xiaomi 13 as a second device and today I call somebody. He told me that he can't understand what I sayin, it sounds like a old radio with bad signal.
The phone is just on the desk, nobody touch it and few hours ago I talk normally without any issue.
Any idea?
dd0bb said:
I use the Xiaomi 13 as a second device and today I call somebody. He told me that he can't understand what I sayin, it sounds like a old radio with bad signal.
The phone is just on the desk, nobody touch it and few hours ago I talk normally without any issue.
Any idea?
Click to expand...
Click to collapse
Sounds more like a sporadic operator problem, not the phone itself
Naw, I try it with offline voice recorder, it's the same as when I call one
DaReDeViL said:
Sounds more like a sporadic operator problem, not the phone itself
Click to expand...
Click to collapse
dd0bb said:
Naw, I try it with offline voice recorder, it's the same as when I call one
Click to expand...
Click to collapse
Oops. That leaves no margin to other theories. Check the holes of all the mics and try also a reboot.
Try to record your voice near every mic as they can't all be faulty or dirty. Also remove the case if there's one
Edit: you can access a tests menu which includes a test for top and main mic by tapping multiple times on the kernel version in the system information page
DaReDeViL said:
Edit: you can access a tests menu which includes a test for top and main mic by tapping multiple times on the kernel version
Click to expand...
Click to collapse
This fix my problem!
Really cringe and I have no idea why but with testing the main and top mic in test menu anything works again.
Thank you

Categories

Resources