Related
Hi guys, I find this quite annoying and wish there is a mod for this. I don't know about other HTC Touch Pro owners but i find my fone quite sensitive.........it's "EASILY" turned on by a single "SHORT" press of the power button.
I didn't even hold it for 1 second, if i suddenly press or tap on it really quick, for not even a second, it turns on.
In case ppl don't understand and tell me that maybe my fone was on in the first place but just have the backlight off, and with a single tap on the power button, the backlight goes back on again. I knew that already. But what the problem really is, is that it's totally off, and when i tap the power on button, it turns on, i.e it vibrates and shows the welcome screen and all that other startup animation.
Is there a way to increase the delay of the finger-press on the power button? Coz it's so annoying that it gets turned on when i don't want it to, especially since this fone's weakness is that it hogs battery even though i've already applied tons of tweaks etc to lower the performance and increase battery life......
Oh and i have another problem, i find the signal kinda weak, is there a program or tweak to increase the signal?? Coz on my old phone Sony Ericsson W950i, the signal is great and I never have bad signal problems with it. But using HTC Touch Pro, i have this problem. This only happens when i'm at Uni, but it's not like they have bad reception or signal blockers there like how schools or colleges have. Just that when i'm inside buildings and there're tons of other buildings around, i can't send the txt coz of bad signals and it's bloody annoying, but using my W950i works fine.....
also I noticed that when i type a txt message using the hardware keyboard, it seems to fail to send most of the time, but only when i'm in UNI. But if i switch to the software keyboard, the one that you use ur fingers or stylus, then when i send the message it often works compare to using hardware keyboard.......any ideas?
Problem No 1: Try Touch Lock Pro
Problem No 2: Try to burn the newest RadioROM.
thx but i'm not trying to lock my phone, so i don't think TouchLock Pro is what i need.......
My Raphael turns also on after pressing the power button for a little few moment. With touchlock Pro you can prevent that you mistake your Raphael. I hope you can understand what I write in my "own" english
Ok so i've got it installed now and went through all the settings but couldn't find anything that can delay the power-on button press, I still have this problem. The app is a screen-lock app, there aren't any options regarding to power-on delays.......
plz tell me what settings etc to use.
I've never said that you can fix your problem with TouchLock Pro. With this you prevent to use your Raphael when you press your power button accidentally.
ya but that's only useful when my fone is on and it locks the phone but i'm trying to prevent my fone from turning on in the first place if i accidentally press the power on button for not even 1 second, because then it will turn on and i don't want that.
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
wow yay finally someone else other than me also report having the same problem, boy am i glad to know that i'm not the only one having this problem, i thought it was just something wrong with my fone and not all HTC Touch Pros....
i can't believe there aren't any results on Google, no forum discussions or solutions to this whatsoever. Also, nobody seemed to report this problem or come up with a solution on XDA as well as other forums i use like PPCgeekz or WMusers etc.........which is odd considering how this problem is quite annoying, that if u suddenly power on the fone by accident, it can drain battery life and god knows HTC Touch Pro has a crap battery life.............
I think that htc has done a bad job testing the powerbutton on the tp2.
There are some other things like weith, thikness and batterylife that could be improved but the powerbutton issue is realy a BIG bug.
Why they didn't make a slidebutton or a timeout between push and activation?
A dobble tap on the powerbutton could also be a solution.
The next rom shoold have a improvement about this button.
People, please react on the powerbutten problem so someone can fix this.
Thanx
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
Leaving the Touch Pro (Raphael) for some minutes without battery will stop the clock. So, when you put back on the battery and power up the device, the clock will display the wrong time. The time when you remove the battery.
This is hardware related.
Can produced different symptoms though.
Facts Behind the Power Button
If take a look at the inside of the powerbutton, there are 2 points making contact when you press the button. If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "QuickShutdown" message.
But, if water/alchohol/liquid gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
As a result, despite the fact that you hit hibernate/sleep/suspend on the hardware power button = yes, the screen fades to black. But IT IS STILL ON. That explains the battery being drained.
Solution:
Open the phone hardware. Clean the power button connector manually.
Disassembling Instructions:http://www.pdacenter.ru/razborka/htc-touch-pro/
Power Button Connector: http://kudryashovda.ru/content/ne-rabotaet-knopka-vklyucheniya-na-htc-diamond
off / on / off on
i heart everyone talking about the sleep of death and to be honest, i havent really experienced this, but i definatley do have an intermitent power on and off button problem on my touch pro 2.
i read on some other forum that it could possibly be the slider that is casuing the problem. but to be honest, the button its self feels fine and looks fineand when i does work it works a treat. i havent had any water damage done to it what so ever. so im not sure , i am new too all this self help mobile stuff. so please excuse my ignorance. Ive doen the usual hard reset, button works for a few hours then calls it a day. soft rest, was working up until this week. i cant get ot to boot up again, while fiddling with the batter and a power lead. but the power button is so intermitent its driving me nuts. id be so grateful if anyone could shine any form of light on this. thanks in advance
Well first of all thanks to REMICS team for this great ROM .. clearly the best so far
Link:- http://forum.xda-developers.com/showthread.php?t=1695175
Leaving the known issues there is only one problem that is getting to my nerve and that is when my phone UI stops working
I can't even unlock the phone as the lock screen doesn't appear. The only option i have is to reboot by long pressing the power key.
No one seem to have reported this bug yet so I am guessing its just with my phone or has anyone faced this problem yet?? If yes than
any help would be deeply appreciated because i don't want to change this ROM.
alphasahil said:
Well first of all thanks to REMICS team for this great ROM .. clearly the best so far
Link:- http://forum.xda-developers.com/showthread.php?t=1695175
Leaving the known issues there is only one problem that is getting to my nerve and that is when my phone UI stops working
I can't even unlock the phone as the lock screen doesn't appear. The only option i have is to reboot by long pressing the power key.
No one seem to have reported this bug yet so I am guessing its just with my phone or has anyone faced this problem yet?? If yes than
any help would be deeply appreciated because i don't want to change this ROM.
Click to expand...
Click to collapse
I am also using RemICS. I am not sure if what i am experiencing is the same, but nevertheless here are the details. Sometimes when I try to unlock the screen doesn respond. Just stays black. I usually press the power button and the screen becomes active again. Next time, just try pressing the power button and see if the screen responds. Just a check.
Yes exactly the screen remains black but the problem is that it doesn't appear even after pressing the power key or any soft key... As i Said i have to reboot the phone...
help with samsung galaxy tablet 2 power button !
*Hi guys*I'm finally making the move and have bought a Samsung galaxy tablet 2 for my bmw e46 dash but have found a problem and wondered if any of you guys have a work around for it ?As you know the power button is on the edge of the tablet externally so once it's installed behind the dash you can't push it to either lock the screen or take it out of sleep mode and also it doesn't matter have a proximity to sensor built in etc*Any idea how I can press this power button while it's behind the dash either by the touchscreen using an app or another way that anybody can think of cause I'm stuck ??*So help ppl**
I've read some people use an app called TASKER to set it so that when they crank the car (giving the tablet power thru the charger) the screen comes on and stays on till its turned off. maybe check more into that?
use a custom rom with volume key waking up option.
Athhar said:
use a custom rom with volume key waking up option.
Click to expand...
Click to collapse
If he won't have access to his power button after mounting the tablet in the dash, he probably won't have access to the volume buttons either.
here is a thread from another site where a guy put a nexus 7 into the dash of his vette http://ls1tech.com/forums/stereo-electronics/1584175-c6-android-tablet-stereo-dash-install.html
If your'e thinking about doing a hardware mod , Try AdamOutler (XDA TV) He does some pretty cool stuff and may offer some solid advice. Knows his stuff thats for sure.
XDA unboxing /tutorial Adam Outler style
Guess you could move the power button onto the dash itself if the device is getting built into it as a permanent fixture ? Not that id have a clue how to do that lol.
Not making any mod to the tab: You may mount a solenoid, http://www.solenoidcity.com/solenoid/solenoidcatalog.htm on the dash to actuate the switch. Will require some mechanical / electrical skill to accomplish the job..
fixed?
did you ever find a solution.. I have the same car and the same issue
Thanks!
Thing is you can easily get apps from store to
1.lock screen
2.turn off tab
3.toggle volume
But real problem comes with turning on tab...
Though you can turn on tab from sleep via some apps called smartawake and others(believe of there are lot of them on play)
By these apps you can turn on tab using proximity sensor(it will work),vibrations
But for instance when your tab gets off you have to press power button.
That can be done by pressing in physically or a hardware hack(you got to open up your tab and do stuff with your power buttons.like providing external switch to it etc)
Droidlover123 said:
Thing is you can easily get apps from store to
1.lock screen
2.turn off tab
3.toggle volume
But real problem comes with turning on tab...
Though you can turn on tab from sleep via some apps called smartawake and others(believe of there are lot of them on play)
By these apps you can turn on tab using proximity sensor(it will work),vibrations
But for instance when your tab gets off you have to press power button.
That can be done by pressing in physically or a hardware hack(you got to open up your tab and do stuff with your power buttons.like providing external switch to it etc)
Click to expand...
Click to collapse
Hey guys I am having a similar problem with my galaxy tab install in the car. I come out in the morning and the tablet is dead. I am currently charging it via usb but was planning on putting a power inverter in the glove box for faster charging (maybe?) What I would really like to do is to be able to extend the power button leads to an external button that I can mount in the dash. Anyone done this before or have any suggestions?
Someone recommended Tap Tap App (lock and unlock the screen with a double tap on the proximity sensor) around here. I've tried it and it works.
ketut.kumajaya said:
Someone recommended Tap Tap App (lock and unlock the screen with a double tap on the proximity sensor) around here. I've tried it and it works.
Click to expand...
Click to collapse
Yea that would work for turning the screen on and off, but im talking about if the tablet dies completely. It will be getting charge when I turn the car back on but I wouldn't be able to turn the tablet back on itself because I can't get to the power button.
bots444 said:
Yea that would work for turning the screen on and off, but im talking about if the tablet dies completely. It will be getting charge when I turn the car back on but I wouldn't be able to turn the tablet back on itself because I can't get to the power button.
Click to expand...
Click to collapse
Your Tab will boot into charge mode. Maybe you can change the init script logic: if boot into charge mode, wait a minute, and then reboot into normal mode.
ketut.kumajaya said:
Your Tab will boot into charge mode. Maybe you can change the init script logic: if boot into charge mode, wait a minute, and then reboot into normal mode.
Click to expand...
Click to collapse
Now that would be awesome. I am a total noob with stuff like that. How would you even go about something like that?
bots444 said:
Now that would be awesome. I am a total noob with stuff like that. How would you even go about something like that?
Click to expand...
Click to collapse
There are some changes that can be made to the kernel to boot the os when powering the tablet. I had this behavior on my lgp500 as a bug on cm builds. To keep the display on you can check keep display on during charging.
Sent from my GT-P3110 using xda app-developers app
bots444 said:
Now that would be awesome. I am a total noob with stuff like that. How would you even go about something like that?
Click to expand...
Click to collapse
I'll try. But now I am so tired, back from my real work duty. A short break after driving my car for about 3 hours, 1 hour from home 3.49AM here
Just to over simplify the first thing that came too my mind was a knob with an off set round plug on the other side...turn the knob you push the button..
Sent from my GT-P3110 using xda app-developers app
ketut.kumajaya said:
Someone recommended Tap Tap App (lock and unlock the screen with a double tap on the proximity sensor) around here. I've tried it and it works.
Click to expand...
Click to collapse
we can use below command to start the device when power plug is on.............:laugh:
fastboot oem off-mode-charge 0
Hi,
Sometimes, my power button will not put the phone to sleep... Other times, it works perfectly...
It is not a hardware problem, as when this happens, I can ALWAYS hold it and see the shutdown/reboot menu. Then, after dismissing the menu, I can ALWAYS put the phone to sleep using the button. It's like if the key was ignored when that happens.
By the way, double tapping the status bar works all the time to put the device to sleep.
I think it is a software problem.
Unfortunately, I cannot always make it happen, as my button works probably 90% of the time...
Anybody got this ?
not had this issue with the phone. might be faulty hardware
harrys1991 said:
not had this issue with the phone. might be faulty hardware
Click to expand...
Click to collapse
I don't think it's a hardware problem, because it alwas work to open the screen.
I was able to catch a logcat and I opened a jira for it :
https://jira.cyanogenmod.org/browse/BACON-1344
Hope somebody can find what is the problem.
My jira was merged :
https://jira.cyanogenmod.org/browse/BACON-837
Anybody else have this problem ?
My volume and power button's both are not working as of yesterday . They worked fine after 38R update , but started to have this issue for no reason .
Luckily I had the double Tap to wake up selected and so am able to access the phone.
I too get something similar but it's to wake up the screen for me that works 1/2 the time. Also double taping to wake up is pretty bad since 38R.
Cholerabob said:
I too get something similar but it's to wake up the screen for me that works 1/2 the time. Also double taping to wake up is pretty bad since 38R.
Click to expand...
Click to collapse
I have the exact same problem my self. It is extremely annoying! I can't find a way to fix that. I tried numerous different roms with no luck. Unfortunately i can't find anyone else in the internet having the same issue. It seems it is just you and me at the moment. The only work around is using dt2w which always works but the problem with dt2w many times unlocks the phone without wanting to.
I hope some experienced people here have a look on this problem!!
Please vote on jira.cyanogenmod.org to get some attention to this issue.
dcoulombe said:
Please vote on jira.cyanogenmod.org to get some attention to this issue.
Click to expand...
Click to collapse
Already did. Let's hope they will try ti fix it.
me too
dima22 said:
I have the exact same problem my self. It is extremely annoying! I can't find a way to fix that. I tried numerous different roms with no luck. Unfortunately i can't find anyone else in the internet having the same issue. It seems it is just you and me at the moment. The only work around is using dt2w which always works but the problem with dt2w many times unlocks the phone without wanting to.
I hope some experienced people here have a look on this problem!!
Click to expand...
Click to collapse
let me know how you could resolve the issue my screen is not getting on while outgoing call is active, power button doesn't wake the screen most of the times
I have the same problem, sometimes work sometimes not. I am using cm12, and before that i used cataclyzm mode with same problem.
Button worked fine on kit kat.
What should we do?
Has anyone found a solution to this problem ?
It's rather strange
Everything worked normally on CM11S, it also works for some time after a reboot and power on does work , just power off doesnt :/
MAy be I have a solution
nerellav said:
let me know how you could resolve the issue my screen is not getting on while outgoing call is active, power button doesn't wake the screen most of the times
Click to expand...
Click to collapse
Go to Settings-Display- Go down and u will find an option Prevent Acciental wake up- Just uncheck it.
Hopefully ur problem will be solved
so today i had fixed my s4 from this rebooting problem.
i was using the phone like everyday then the phone turned off by it self.
when i remove the battery and put it again the phone starts by it self going to a boot loop.
so i went to the samsung center, they told me its a software problem and it need to be flashed by a "j-tag" (software device) and they dont have it.
so i was confused
i have figured out that i cant go to recovery and i can go to the download mode for few seconds BUT! without pressing the power key!
the service center ignored me and refused to fix it.
so my last hope is to fix it by my self, so i did this!
You Have Two Options!!!
1- Hit the phone with the ground softly several times (stupid but fixed my problem)
2- Go to the power button by removing the screws under the phone back cover and release the button (by your self or anyone can handle this) :fingers-crossed:
:victory:
Had the same issue few days back...fixed it bu opening the body and putting back in place
arindam_mitra1985 said:
Had the same issue few days back...fixed it bu opening the body and putting back in place
Click to expand...
Click to collapse
I remember having the same issue, just opened recovery and did a factory reset..
Ternedo said:
I remember having the same issue, just opened recovery and did a factory reset..
Click to expand...
Click to collapse
How can it be the same if he wasnt able to enter recovery.....
For me there was some issue with the power button getting pressed automatically. ..opening body loosened it..n fixed.. i also had another issue with sview black screen blinking..issue with the Magnetometer. .loosening the L1 screw fixed that. .may b tge button got magnetised somehow. .
i too had the same problem. i found it to be a defective power button as when i just pressed the volume and menu buttons i could get into recovery or download menu correspondingly without additionally clicking the power button.
Hi. I faced this issue as well and the best part it, the button isnt stuck. I've tried pressing and releasing it multiple times, dismantled and check if the button is stuck etc. However, the issue persist, and the exact same symptom which is; able to only go to download mode for a few seconds.
Need some advices here! Thanks!