Hello everybody
I can hardly speak English. Help please. My Nexus5 16gb not included. I installed «GoogleUSBdrive». Unlocked bootloader. Established CMW. Did all wipe. And set Cataclysm [AOSP/Stock]. Phone not included, was a black screen and the words Google. Very long. I got scared and decided to install a stock firmware 4.2.2 via "flash-all.bat" box to start the installation process but it stopped on a 4-speed with the inscription <Whiting for divece>. The phone will not turn on. When connected to a computer is a device "QHSUS_BULK". Сould not find driver
please help meeee
Have u installed Google SDK? Or at least download naked USB driver and browse to it when Windows asked? U should install everything that you'll need first before do anything else
Sent from my Nexus 5 using Tapatalk
What comes up when you type fastboot devices (assuming you have drivers. Since you unlocked BL) into your command prompt?
Sent from my Nexus 5 using Tapatalk
This happened on my n7. It wasn't the same scenario. But it did not want to turn on at all. Iv read about N5 users doing this as well.
1. Plug phone into wall charger and hold power button down for 15 seconds.
2. Unplug phone.
3. Hold Volume up+Volume down+Power button for a couple of seconds till it boots back to the bootloader.
It may not do this at the first try so you might have to keep on holding just the Power button for a while and then doing step 3 again.
Sent from my Nexus 5 using xda app-developers app
---------- Post added at 07:53 AM ---------- Previous post was at 07:51 AM ----------
Hope that works. Such a young device
Sent from my Nexus 5 using xda app-developers app
Did he write firmware 4.2.2??? And installing and first booting of any new rom takes a little bit of time.. So passion is the key to success here..
Sent from my Nexus 5 via XDA Premium HD
You should flash 4.4.2 stock hammerhead img
Sent from my Nexus 5 using Tapatalk
whozilla said:
3. Hold Volume up+Volume down+Power button for a couple of seconds till it boots back to the bootloader.
Click to expand...
Click to collapse
Volume up is not necessary
---------- Post added at 07:53 AM ---------- Previous post was at 07:52 AM ----------
O4upov said:
Hello everybody
I can hardly speak English. Help please. My Nexus5 16gb not included. I installed «GoogleUSBdrive». Unlocked bootloader. Established CMW. Did all wipe. And set Cataclysm [AOSP/Stock]. Phone not included, was a black screen and the words Google. Very long. I got scared and decided to install a stock firmware 4.2.2 via "flash-all.bat" box to start the installation process but it stopped on a 4-speed with the inscription <Whiting for divece>. The phone will not turn on. When connected to a computer is a device "QHSUS_BULK". Сould not find driver
Click to expand...
Click to collapse
i hope you did not flash 4.2.2 mako
When you first install a ROM it takes a while for the first bootup and then it will show "android is upgrading"
whozilla said:
This happened on my n7. It wasn't the same scenario. But it did not want to turn on at all. Iv read about N5 users doing this as well.
1. Plug phone into wall charger and hold power button down for 15 seconds.
2. Unplug phone.
3. Hold Volume up+Volume down+Power button for a couple of seconds till it boots back to the bootloader.
It may not do this at the first try so you might have to keep on holding just the Power button for a while and then doing step 3 again.
Sent from my Nexus 5 using xda app-developers app
---------- Post added at 07:53 AM ---------- Previous post was at 07:51 AM ----------
Hope that works. Such a young device
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
not included
Heh?
Sent from my Nexus 5 using xda app-developers app
I installed a "qhsusb_bulk" driver from "qhsusb_dload" my device is determined "qualcomm hs-usb qdloader 900"
install new Rom...
mellevdlinde said:
Try this http://forum.xda-developers.com/showthread.php?t=2513937
[TOOL] 12/11/13 One Click Factory Restore KOT49H 4.4.2 (dead or alive)
Sent from my Nexus 5 (Tapatalk)
Click to expand...
Click to collapse
my phone won't turn on. instructions need to go to fastboot
What else can be varianty.Ustanovili driver and device defined as android bootloader interface but the command line after the query device blank line
mellevdlinde said:
If this doesn't work I can't help you
Click to expand...
Click to collapse
yeees, please help me. please tell me your skype or facebook
Related
Hi all, my problem was caused by trying to do downgrade.el phone went off and never start the system, now takes 8 minutes on and three minutes after vibrating then stays on the white screen with green htc logo there takes hours and never enters the system, try enter bootloader mode takes 8 minutes pawer pressing vol down and I can not move when you turn that says factory reset because it freezes, somebody help me:crying
aiyoros02 said:
Hi all, my problem was caused by trying to do downgrade.el phone went off and never start the system, now takes 8 minutes on and three minutes after vibrating then stays on the white screen with green htc logo there takes hours and never enters the system, try enter bootloader mode takes 8 minutes pawer pressing vol down and I can not move when you turn that says factory reset because it freezes, somebody help me:crying
Click to expand...
Click to collapse
What exactly did you do when trying to downgrade?
bananagranola said:
What exactly did you do when trying to downgrade?
Click to expand...
Click to collapse
trailed off and did not turn
aiyoros02 said:
trailed off and did not turn
Click to expand...
Click to collapse
1. I have no idea what that means.
2. Did you follow a guide? Did you use AAHK? Did you try to use a RUU? Downgrade fro mwhat to what? Specifically, step by step, what did you do?
Alternate method
aiyoros02 said:
Hi all, my problem was caused by trying to do downgrade.el phone went off and never start the system, now takes 8 minutes on and three minutes after vibrating then stays on the white screen with green htc logo there takes hours and never enters the system, try enter bootloader mode takes 8 minutes pawer pressing vol down and I can not move when you turn that says factory reset because it freezes, somebody help me:crying
Click to expand...
Click to collapse
Did you use this method?
http://theunlockr.com/2012/03/28/how-to-root-the-htc-inspire-4g-advanced-ace-hack-kit-method/
bananagranola said:
1. I have no idea what that means.
2. Did you follow a guide? Did you use AAHK? Did you try to use a RUU? Downgrade fro mwhat to what? Specifically, step by step, what did you do?
Click to expand...
Click to collapse
try to downgrade with this method and it didn't work PD98IMG
uss..p8triot said:
Did you use this method?
http://theunlockr.com/2012/03/28/how-to-root-the-htc-inspire-4g-advanced-ace-hack-kit-method/
Click to expand...
Click to collapse
and try that method but return again and maybe work but explain hangs on the white screen and if I use bootloader mode hangs and will not let me select any option
aiyoros02 said:
and try that method but return again and maybe work but explain hangs on the white screen and if I use bootloader mode hangs and will not let me select any option
Click to expand...
Click to collapse
It probably has something to do with the loss of power in the middle of your process. Was this the method you used originally?
uss..p8triot said:
It probably has something to do with the loss of power in the middle of your process. Was this the method you used originally?
Click to expand...
Click to collapse
if and when I returned to light takes 8 minutes to get started and then 3 on vibrate and then hangs on the white panatlla never start
aiyoros02 said:
if and when I returned to light takes 8 minutes to get started and then 3 on vibrate and then hangs on the white panatlla never start
Click to expand...
Click to collapse
I don't know what you've tried so far, but give this a whirl...
Push and hold the "Volume Down (-) button">press the power button. Hopefully you'll boot into the Recovery Menu. If you get it, press the volume down button and when you get to the "Recovery" option his the power button.
Your bootloader has been downgraded to a froyo version and you have a gingerbread shipped phone. Your phone is incompatible with this hboot. You need to use the hack kit to flash a correct version of hboot. Or do it manually if can't get hack kit to recognise your device when it passes the main white HTC screen.
Sent from my Inspire 4G using xda premium
Gizmoe said:
Your bootloader has been downgraded to a froyo version and you have a gingerbread shipped phone. Your phone is incompatible with this hboot. You need to use the hack kit to flash a correct version of hboot. Or do it manually if can't get hack kit to recognise your device when it passes the main white HTC screen.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Downgraded using Ace Hack Kit and currently at HBOOT-0.85..0024 with S-off, is this still incompatible?
uss..p8triot said:
I don't know what you've tried so far, but give this a whirl...
Push and hold the "Volume Down (-) button">press the power button. Hopefully you'll boot into the Recovery Menu. If you get it, press the volume down button and when you get to the "Recovery" option his the power button.
Click to expand...
Click to collapse
if I go to the recovery screen but does not allow me to press down or up there hangs
aiyoros02 said:
if I go to the recovery screen but does not allow me to press down or up there hangs
Click to expand...
Click to collapse
Disregard previous....
I was able to get it to load. bananagranola was able to help me upgrade my kernel to 3.XX using this link http://forum.xda-developers.com/showthread.php?t=1810461
and all is well in the world now!
yes, but freezes there and does not move
uss..p8triot said:
Do you get the screen where you have the option of BOOTLOADER/RECOVERY etc.?
Click to expand...
Click to collapse
Try removing the battery and then go through the previous steps. Your phone is just in the weeds.
ok keep trying, I say step tomorrow
uss..p8triot said:
Try removing the battery and then go through the previous steps. Your phone is just in the weeds.
Click to expand...
Click to collapse
@uss..p8triot. Your hboot is the correct gb version.
Sent from my Inspire 4G using xda premium
---------- Post added at 09:27 PM ---------- Previous post was at 09:24 PM ----------
aiyoros02 said:
ok keep trying, I say step tomorrow
Click to expand...
Click to collapse
My post earlier was intended for you. You have a bad hboot.
Sent from my Inspire 4G using xda premium
---------- Post added at 09:30 PM ---------- Previous post was at 09:27 PM ----------
You won't be able to use hboot. You have to let it try to boot and just hang on whatever screen it does. From there your phone is recognizeable via adb or hackkit. Both can be used to flash hboot. With adb use the fastboot commands.
Sent from my Inspire 4G using xda premium
Gizmoe said:
@uss..p8triot. Your hboot is the correct gb version.
Sent from my Inspire 4G using xda premium
---------- Post added at 09:27 PM ---------- Previous post was at 09:24 PM ----------
My post earlier was intended for you. You have a bad hboot.
Sent from my Inspire 4G using xda premium
---------- Post added at 09:30 PM ---------- Previous post was at 09:27 PM ----------
You won't be able to use hboot. You have to let it try to boot and just hang on whatever screen it does. From there your phone is recognizeable via adb or hackkit. Both can be used to flash hboot. With adb use the fastboot commands.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
can show me the link to your previous post?
aiyoros02 said:
Hi all, my problem was caused by trying to do downgrade.el phone went off and never start the system, now takes 8 minutes on and three minutes after vibrating then stays on the white screen with green htc logo there takes hours and never enters the system, try enter bootloader mode takes 8 minutes pawer pressing vol down and I can not move when you turn that says factory reset because it freezes, somebody help me:crying
Click to expand...
Click to collapse
That is symptom of a messed bootloader. How were you trying to downgrade? if you flashed a froyo hboot or RUU and your device was shipped with GB then you need to fix the bootloader. You are warned about this.
Hi,
This is my first post. Been reading posts for awhile to make sure I'm doing the most I can on my own for my Galaxy S3 and my TF300 but I think I finally hit the wall.
Here's the si
Got a TF300T, unlocked it fine (using SDK and command line through all this) rooted to CWM with fastboot,that didn't work right so I flashed to TWRP, put on paranoid android that didn't take so decided to put back to stock to start fresh. Put it back to stock, unrooted. Looks like I used the wrong version firmware (some keys on my board weren't mapped right, press comma, get semi colon). So I checked and found the newer version firmware, was in the process of loading using command line, accidentally pressed enter while loading so it looks like it was doubling up and looks like it froze so I stopped it by holding on and Vol Down now it won't turn back on.
Now I know that's probably what's causing my problem. But now I get nothign on the screen, I've tried using the tips I've heard on here: reset hole, holding On and Vol Up to get into apx mode etc but nothing is working.
I've searched on the forums but I haven't found anything for my particular problem but maybe I'm not asking the right questions.
I'd really appreciate any help, spent too much on this to give up.
Thanks
Mine transformer tf300 can be turned on, but then it get's stuck on the bootscreen with the text bootloader unlocked. I can't turn it off normally, holding vol - & power button does nothing. To turn it of I need to let the battery run out or press the vol + button & reset hole.
I found a tutorial on youtube how to unbrick it ( I am not able to add the link because I am new).
The tutorials uses apx mode. Here is where my problems start. When I press the vol + button and connect my tablet to my laptop it does enter apx mode and it is shown in the device manager.
But I need to force install the driver acording to the tutorial but I don't know what driver I need to install. I've tried the drivers from the asus website and the driverd for adb. but nothing.
Can anyone tell me which driver I have to install? Because getting in to apx mode is the only way I can get any responce from my tablet. When connected I see apx device connected in the device manager, but nothing in my computer where my disks and removable disks show up.
"poorbil" i have the same issiue you have with the tf300.in my situation i succsesfully installed the APX drivers but i can't find a guide how to use it.maybe we can help eachother.here is my yahoo idky2006_18
Please send me the youtube link and i will send you the link with the drivers for APX.if you have teamviewer i can assist you if dont know how to do it.
Sorry for my bad english.
Sent from my GT-I9100 using xda premium
---------- Post added at 05:18 PM ---------- Previous post was at 05:05 PM ----------
oky2006_18
Sent from my GT-I9100 using xda premium
vio_87 said:
"poorbil" i have the same issiue you have with the tf300.in my situation i succsesfully installed the APX drivers but i can't find a guide how to use it.maybe we can help eachother.here is my yahoo idky2006_18
Please send me the youtube link and i will send you the link with the drivers for APX.if you have teamviewer i can assist you if dont know how to do it.
Sorry for my bad english.
Sent from my GT-I9100 using xda premium
---------- Post added at 05:18 PM ---------- Previous post was at 05:05 PM ----------
oky2006_18
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Like a Sir
Hi
I've a O1 with CM10 (Rashed build 7) and I try to change the DPI with LCD Density Modder for install a HDPI theme. When I try to reboot, the phone stucks on CM logo and the ADB on my computer doesn't work, so i'm unable to enter to recovery. Is my phone bricked? Is there any other solution that is not use KDZ to flash the phone with the system ROM?
Thanks.
xsam123 said:
Hi
I've a O1 with CM10 (Rashed build 7) and I try to change the DPI with LCD Density Modder for install a HDPI theme. When I try to reboot, the phone stucks on CM logo and the ADB on my computer doesn't work, so i'm unable to enter to recovery. Is my phone bricked? Is there any other solution that is not use KDZ to flash the phone with the system ROM?
Thanks.
Click to expand...
Click to collapse
did u flashed a custom recovery like clockworkmode ? enter recovery via long press power+home+vol up and do a factory reset
grigtm said:
did u flashed a custom recovery like clockworkmode ? enter recovery via long press power+home+vol up and do a factory reset
Click to expand...
Click to collapse
Thanks, it works. I was tried to use the keys, but I used Power+VolDown+Home.LOL, my mistake.
Help I Bricked My Phone I Have A LG Optimus T And After Using CM9 I Tried Flashing CM10 Failed Booting So I Used KDZ To Go Back To Stock And Failed So I Panicked And Removed The Battery It Won't Boot Up No Lights No Recovery No LG Logo Nothing Computer Won't Recognize The Phone Please Help Me
Sent from my SAMSUNG-SGH-T769 using xda premium
put back battery and long press power
---------- Post added at 08:11 PM ---------- Previous post was at 08:06 PM ----------
put back battery and long press power+vol up+home to go into recovery, conect also charger cable, maybe your battery is dead
Well I've Tired That No Response
Samsung Has A Jig
Motorola Has A Factory Cable
LG Has? Anything Similar??
Any Unbrick Tool/Device By Or For LG Phones?
Sent from my SAMSUNG-SGH-T769 using xda premium
my O1 has a problem with power button, if I don't press hard it abouth maybe 3-5 seconds it wont start, so....
Well When I Connect It To Charge Nothing Happens No Charging Symbol Or No Lights, Nothing
Sent from my SAMSUNG-SGH-T769 using xda premium
ok, my phone does same if switched off , w8 abouth 5 minutes, unplug, remove battery and press power abouth 5-10 sec, put back batt and plug charger and try again
I'm At School Now Had A Delayed Start Due To Snow I Will Try When I Get Home And I Will Post My Results Later Today Around 5:30 Or 6 PM Central Time Zone USA
Sent from my SAMSUNG-SGH-T769 using xda premium
xsam123 said:
Thanks, it works. I was tried to use the keys, but I used Power+VolDown+Home.LOL, my mistake.
Click to expand...
Click to collapse
but for recovery its vol down only
Didn't Work... Thanks Tho
Sent from my SAMSUNG-SGH-T769 using xda premium
Jserrano56 said:
Didn't Work... Thanks Tho
Sent from my SAMSUNG-SGH-T769 using xda premium
Click to expand...
Click to collapse
You shouldn't have used kdz.. you could easy recover by flashing a new rom.
Now that you might have bricked it.. try home + vol down then power.. hold these buttons for few seconds.. see if it works.
If not.. hold Vol Up and Power and see if it enters emergency mode.. if it does.. you can use kdz again but carefull.... Have complete knowledge of using kdz.
None Of Those Worked But Thanks For The Help.
Sent from my SAMSUNG-SGH-T769 using xda premium
Here.
Didn't Work
Sent from my SAMSUNG-SGH-T769 using xda premium
Its a hard brick then.. you have no other option other than LG service centre.
kdz
what is kdz???
http://forum.xda-developers.com/showthread.php?t=1184056
Yeah But I'll Think About It Cuz JTAG Is $40 At mobiletechvideos.com and I have a Samsung Galaxy S Blaze 4G I Don't Know If It's Worth It?
Sent from my SAMSUNG-SGH-T769 using xda premium
Hi friends,
My phone is not booting in fastboot and its not evenshowin device manager. and it is not even turning on Please Help me guys.
Check USB micro jecket
Sent from my V70 using XDA Free mobile app
What happens when you try "hold + volume up button"? When you plug the device into the computer, does it read?
Sent from my SHIELD Tablet using XDA Free mobile app
Thejimmynguyen said:
What happens when you try "hold + volume up button"? When you plug the device into the computer, does it read?
Sent from my SHIELD Tablet using XDA Free mobile app
Click to expand...
Click to collapse
My Phone is not responding. My Phone is in Hardbrick mod. how do i unbrick my phone
You tryed to push and hold all buttons at the same time for many seconds? Sometimes it can work again. But you dont gave us many information what you did that it got bricked and what you tryed to unbrick it
Julsen1985 said:
You tryed to push and hold all buttons at the same time for many seconds? Sometimes it can work again. But you dont gave us many information what you did that it got bricked and what you tryed to unbrick it
Click to expand...
Click to collapse
i think i messed up with Fastboot of My Honor6 H60-L04. i think Fastboot got erased.
Symptoms:No chargning symbol, No vibration and it not detecting in My PC :crying::crying::crying::crying:
Sorrym then I do not have a clue when nothing happens when u connect the phone with your pc
It is worth one more try if you haven't, to get into fast boot mode from a power off state.
Press and hold volumn down, plug in USB cable, until it turns on.
---------- Post added at 05:23 PM ---------- Previous post was at 05:19 PM ----------
Did you fastboot erase bootloader and reboot without first refresh another bootloader first?
Hi, my phone is hard bricked. I dont know why but phone is completly dead. It douesnt react on power button or vol + - and power buton etc. Only if I connect it into the PC I will get QHSUSB_BULK driver installing and after that care suite emergency connectivity is installed. Can you help me with unbricking? I have another one running OK. I have bricked by flashing I think.
The story
1. phone is telling me something about no boot / bootloader / partitions
2. I download "dload" folder with "update.app" to the SD card and start flashing - OK (B189 I think)
3. trying to testing and after that I use wipe/factory reset
4. reboot
5. unplug battery
6. plug battery in
7. next day phone is completly dead
I will apriciate any help. Thank you
I also try a others battery but there is no charging led light. Phone doesnt react on any button. Can you help me please?
Wow, this is a tough one. I'm pretty good with restoring phones and this has me baffled. I don't understand how you managed to do this. Fill me in on what you were doing at the time you bricked the device.
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
---------- Post added at 10:41 AM ---------- Previous post was at 09:53 AM ----------
Hold together:*Power Button + Volume Up Button*for several seconds. And tell me if that does anything to the device (must be decently charged to work)
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
TechGuyAnthony said:
Wow, this is a tough one. I'm pretty good with restoring phones and this has me baffled. I don't understand how you managed to do this. Fill me in on what you were doing at the time you bricked the device.
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
---------- Post added at 10:41 AM ---------- Previous post was at 09:53 AM ----------
Hold together:*Power Button + Volume Up Button*for several seconds. And tell me if that does anything to the device (must be decently charged to work)
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
Click to expand...
Click to collapse
Nothing. I pplug in into the charger 5V 2.1A for 4 hours, after that try another charger with another USB cable. But there is no notification (LED or information on LCD) about charging. Phone is completly dead. It doesnt react on any button or any combination (try to hold for 1 minute every combination). But if I plug in into the PC that I see care suite emergency connectivity
Ya. I've had a phone like this before. There was nothing I could to revive it. Start considering replacements... [emoji13]
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
Thank you for your support. On the second phone which I repair by firmware upgrade is no IMEI in system. How can I recover IMEI on this phone?
bajlek said:
Thank you for your support. On the second phone which I repair by firmware upgrade is no IMEI in system. How can I recover IMEI on this phone?
Click to expand...
Click to collapse
Re-flash by dload and everything is now fine
How do you solved? My phone won't start.
msm8210 files needed
I have the same problem...
Does anyone could provide the unbrick files for Y530-U00 to use with QFIL ??
We need
MPRG8210.HEX
8210_msimage.mbn
rawprogram0.xml
patch0.xml
Click to expand...
Click to collapse
Thank you!
Did u find a solution?
---------- Post added at 05:55 PM ---------- Previous post was at 05:54 PM ----------
I need some files if someone wants to extract that files for me
bajlek said:
It doesnt react on any button or any combination
Click to expand...
Click to collapse
So that means, that the preloader is bricked. Because if it would react on any button (Volume Up, Volume Down, Power), then it would normally react. For those buttons are being handled by the preloader partition file. If you either flashed the preloader from a wrong ROM (Like I did one time on Wiko Lenny 3), then no button will react. Those buttons are being handled by their ID's (I think, not sure). Preloader handles the Button ID if it is pressed. If yes, preloader will detect the clicked button and handle the action (for example: Clicking the power button when Display is off → Makes the Display to go on).
If the preloader is bricked, then either you need a new phone or reflash the preloader.
Huawei Y530 Bricked too
So heres what happened:
Phone didnt boot and showed a recovery, boot image verify failed.
-i copied original firmware for this model (i used right one) to sdcard and updated from it.
When the update was finishing the phone was stuck.
-I tryed to turn on the phone but i cant.
Plugged it into PC, reflashed but still its dead.
Anyone, help please