Hi, my phone is hard bricked. I dont know why but phone is completly dead. It douesnt react on power button or vol + - and power buton etc. Only if I connect it into the PC I will get QHSUSB_BULK driver installing and after that care suite emergency connectivity is installed. Can you help me with unbricking? I have another one running OK. I have bricked by flashing I think.
The story
1. phone is telling me something about no boot / bootloader / partitions
2. I download "dload" folder with "update.app" to the SD card and start flashing - OK (B189 I think)
3. trying to testing and after that I use wipe/factory reset
4. reboot
5. unplug battery
6. plug battery in
7. next day phone is completly dead
I will apriciate any help. Thank you
I also try a others battery but there is no charging led light. Phone doesnt react on any button. Can you help me please?
Wow, this is a tough one. I'm pretty good with restoring phones and this has me baffled. I don't understand how you managed to do this. Fill me in on what you were doing at the time you bricked the device.
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
---------- Post added at 10:41 AM ---------- Previous post was at 09:53 AM ----------
Hold together:*Power Button + Volume Up Button*for several seconds. And tell me if that does anything to the device (must be decently charged to work)
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
TechGuyAnthony said:
Wow, this is a tough one. I'm pretty good with restoring phones and this has me baffled. I don't understand how you managed to do this. Fill me in on what you were doing at the time you bricked the device.
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
---------- Post added at 10:41 AM ---------- Previous post was at 09:53 AM ----------
Hold together:*Power Button + Volume Up Button*for several seconds. And tell me if that does anything to the device (must be decently charged to work)
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
Click to expand...
Click to collapse
Nothing. I pplug in into the charger 5V 2.1A for 4 hours, after that try another charger with another USB cable. But there is no notification (LED or information on LCD) about charging. Phone is completly dead. It doesnt react on any button or any combination (try to hold for 1 minute every combination). But if I plug in into the PC that I see care suite emergency connectivity
Ya. I've had a phone like this before. There was nothing I could to revive it. Start considering replacements... [emoji13]
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
Thank you for your support. On the second phone which I repair by firmware upgrade is no IMEI in system. How can I recover IMEI on this phone?
bajlek said:
Thank you for your support. On the second phone which I repair by firmware upgrade is no IMEI in system. How can I recover IMEI on this phone?
Click to expand...
Click to collapse
Re-flash by dload and everything is now fine
How do you solved? My phone won't start.
msm8210 files needed
I have the same problem...
Does anyone could provide the unbrick files for Y530-U00 to use with QFIL ??
We need
MPRG8210.HEX
8210_msimage.mbn
rawprogram0.xml
patch0.xml
Click to expand...
Click to collapse
Thank you!
Did u find a solution?
---------- Post added at 05:55 PM ---------- Previous post was at 05:54 PM ----------
I need some files if someone wants to extract that files for me
bajlek said:
It doesnt react on any button or any combination
Click to expand...
Click to collapse
So that means, that the preloader is bricked. Because if it would react on any button (Volume Up, Volume Down, Power), then it would normally react. For those buttons are being handled by the preloader partition file. If you either flashed the preloader from a wrong ROM (Like I did one time on Wiko Lenny 3), then no button will react. Those buttons are being handled by their ID's (I think, not sure). Preloader handles the Button ID if it is pressed. If yes, preloader will detect the clicked button and handle the action (for example: Clicking the power button when Display is off → Makes the Display to go on).
If the preloader is bricked, then either you need a new phone or reflash the preloader.
Huawei Y530 Bricked too
So heres what happened:
Phone didnt boot and showed a recovery, boot image verify failed.
-i copied original firmware for this model (i used right one) to sdcard and updated from it.
When the update was finishing the phone was stuck.
-I tryed to turn on the phone but i cant.
Plugged it into PC, reflashed but still its dead.
Anyone, help please
Related
Hi,
This is my first post. Been reading posts for awhile to make sure I'm doing the most I can on my own for my Galaxy S3 and my TF300 but I think I finally hit the wall.
Here's the si
Got a TF300T, unlocked it fine (using SDK and command line through all this) rooted to CWM with fastboot,that didn't work right so I flashed to TWRP, put on paranoid android that didn't take so decided to put back to stock to start fresh. Put it back to stock, unrooted. Looks like I used the wrong version firmware (some keys on my board weren't mapped right, press comma, get semi colon). So I checked and found the newer version firmware, was in the process of loading using command line, accidentally pressed enter while loading so it looks like it was doubling up and looks like it froze so I stopped it by holding on and Vol Down now it won't turn back on.
Now I know that's probably what's causing my problem. But now I get nothign on the screen, I've tried using the tips I've heard on here: reset hole, holding On and Vol Up to get into apx mode etc but nothing is working.
I've searched on the forums but I haven't found anything for my particular problem but maybe I'm not asking the right questions.
I'd really appreciate any help, spent too much on this to give up.
Thanks
Mine transformer tf300 can be turned on, but then it get's stuck on the bootscreen with the text bootloader unlocked. I can't turn it off normally, holding vol - & power button does nothing. To turn it of I need to let the battery run out or press the vol + button & reset hole.
I found a tutorial on youtube how to unbrick it ( I am not able to add the link because I am new).
The tutorials uses apx mode. Here is where my problems start. When I press the vol + button and connect my tablet to my laptop it does enter apx mode and it is shown in the device manager.
But I need to force install the driver acording to the tutorial but I don't know what driver I need to install. I've tried the drivers from the asus website and the driverd for adb. but nothing.
Can anyone tell me which driver I have to install? Because getting in to apx mode is the only way I can get any responce from my tablet. When connected I see apx device connected in the device manager, but nothing in my computer where my disks and removable disks show up.
"poorbil" i have the same issiue you have with the tf300.in my situation i succsesfully installed the APX drivers but i can't find a guide how to use it.maybe we can help eachother.here is my yahoo idky2006_18
Please send me the youtube link and i will send you the link with the drivers for APX.if you have teamviewer i can assist you if dont know how to do it.
Sorry for my bad english.
Sent from my GT-I9100 using xda premium
---------- Post added at 05:18 PM ---------- Previous post was at 05:05 PM ----------
oky2006_18
Sent from my GT-I9100 using xda premium
vio_87 said:
"poorbil" i have the same issiue you have with the tf300.in my situation i succsesfully installed the APX drivers but i can't find a guide how to use it.maybe we can help eachother.here is my yahoo idky2006_18
Please send me the youtube link and i will send you the link with the drivers for APX.if you have teamviewer i can assist you if dont know how to do it.
Sorry for my bad english.
Sent from my GT-I9100 using xda premium
---------- Post added at 05:18 PM ---------- Previous post was at 05:05 PM ----------
oky2006_18
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Like a Sir
Hello everybody
I can hardly speak English. Help please. My Nexus5 16gb not included. I installed «GoogleUSBdrive». Unlocked bootloader. Established CMW. Did all wipe. And set Cataclysm [AOSP/Stock]. Phone not included, was a black screen and the words Google. Very long. I got scared and decided to install a stock firmware 4.2.2 via "flash-all.bat" box to start the installation process but it stopped on a 4-speed with the inscription <Whiting for divece>. The phone will not turn on. When connected to a computer is a device "QHSUS_BULK". Сould not find driver
please help meeee
Have u installed Google SDK? Or at least download naked USB driver and browse to it when Windows asked? U should install everything that you'll need first before do anything else
Sent from my Nexus 5 using Tapatalk
What comes up when you type fastboot devices (assuming you have drivers. Since you unlocked BL) into your command prompt?
Sent from my Nexus 5 using Tapatalk
This happened on my n7. It wasn't the same scenario. But it did not want to turn on at all. Iv read about N5 users doing this as well.
1. Plug phone into wall charger and hold power button down for 15 seconds.
2. Unplug phone.
3. Hold Volume up+Volume down+Power button for a couple of seconds till it boots back to the bootloader.
It may not do this at the first try so you might have to keep on holding just the Power button for a while and then doing step 3 again.
Sent from my Nexus 5 using xda app-developers app
---------- Post added at 07:53 AM ---------- Previous post was at 07:51 AM ----------
Hope that works. Such a young device
Sent from my Nexus 5 using xda app-developers app
Did he write firmware 4.2.2??? And installing and first booting of any new rom takes a little bit of time.. So passion is the key to success here..
Sent from my Nexus 5 via XDA Premium HD
You should flash 4.4.2 stock hammerhead img
Sent from my Nexus 5 using Tapatalk
whozilla said:
3. Hold Volume up+Volume down+Power button for a couple of seconds till it boots back to the bootloader.
Click to expand...
Click to collapse
Volume up is not necessary
---------- Post added at 07:53 AM ---------- Previous post was at 07:52 AM ----------
O4upov said:
Hello everybody
I can hardly speak English. Help please. My Nexus5 16gb not included. I installed «GoogleUSBdrive». Unlocked bootloader. Established CMW. Did all wipe. And set Cataclysm [AOSP/Stock]. Phone not included, was a black screen and the words Google. Very long. I got scared and decided to install a stock firmware 4.2.2 via "flash-all.bat" box to start the installation process but it stopped on a 4-speed with the inscription <Whiting for divece>. The phone will not turn on. When connected to a computer is a device "QHSUS_BULK". Сould not find driver
Click to expand...
Click to collapse
i hope you did not flash 4.2.2 mako
When you first install a ROM it takes a while for the first bootup and then it will show "android is upgrading"
whozilla said:
This happened on my n7. It wasn't the same scenario. But it did not want to turn on at all. Iv read about N5 users doing this as well.
1. Plug phone into wall charger and hold power button down for 15 seconds.
2. Unplug phone.
3. Hold Volume up+Volume down+Power button for a couple of seconds till it boots back to the bootloader.
It may not do this at the first try so you might have to keep on holding just the Power button for a while and then doing step 3 again.
Sent from my Nexus 5 using xda app-developers app
---------- Post added at 07:53 AM ---------- Previous post was at 07:51 AM ----------
Hope that works. Such a young device
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
not included
Heh?
Sent from my Nexus 5 using xda app-developers app
I installed a "qhsusb_bulk" driver from "qhsusb_dload" my device is determined "qualcomm hs-usb qdloader 900"
install new Rom...
mellevdlinde said:
Try this http://forum.xda-developers.com/showthread.php?t=2513937
[TOOL] 12/11/13 One Click Factory Restore KOT49H 4.4.2 (dead or alive)
Sent from my Nexus 5 (Tapatalk)
Click to expand...
Click to collapse
my phone won't turn on. instructions need to go to fastboot
What else can be varianty.Ustanovili driver and device defined as android bootloader interface but the command line after the query device blank line
mellevdlinde said:
If this doesn't work I can't help you
Click to expand...
Click to collapse
yeees, please help me. please tell me your skype or facebook
I was trying to flash BlissPop. It didn't flash. So, I decided to flash fastboot image of CM11s 44.
I issued this command :
Code:
fastboot flash modem NON-HLOS.bin
fastboot reboot-bootloader
fastboot flash sbl1 sbl1.mbn
fastboot reboot-bootloader
The flash sbl1 command gave an error.
I rebooted bootloader. The phone turned off, but it never turned on.
I don't know how could it brick my phone, because I've done it a few times without any error.
My battery was on 65% when I was doing all this. So, I don't suspect battery has died.
But, I'm charging the phone anyway. There is no lead, but the power bank shows that battery is taking charge.
When I connect the phone to PC, it shows no signs of any device connected. Device manager doesn't show any thing/any refresh.
I've tried to push the power button for about a minute for 5 times, as 1+1 site says.
I've tried vol up + power and vol down + power buttons. It doesn't boot it.
I've no access to fastboot, recovery, OS, anything.
Please, suggest me solutions.
Did you flash the firmware updates before you flashed bliss? There is a toolkit out there, linked in bliss thread, on how to unbrick. I'll see if I can't find it.
Sent from my A0001 using Tapatalk
---------- Post added at 11:49 PM ---------- Previous post was at 11:45 PM ----------
http://forum.xda-developers.com/showthread.php?p=58230647
First look at this perhaps. If not there is a toolkit out there to flash back to stock. Should be able to communicate w the phone if it can turn on at all.
Sent from my A0001 using Tapatalk
http://forum.xda-developers.com/showthread.php?p=58230647
First look at this perhaps. If not there is a toolkit out there to flash back to stock. Should be able to communicate w the phone if it can turn on at all.
Click to expand...
Click to collapse
Thanks. I looked at it.
But, as you said I can't do anything till the phone turns on even once.
BTW, I highly suspect battery drain, because I was in TWRP for long to take backup, flashing MultiROM, etc. TWRP is known to not allow charging, as reported by some people.
Can you tell me whether flashing sbl1 could have bricked it or not? It didn't fail to flash in past and it never caused problem.
I had flashed CM12 firmware update before flashing BlissPop. Could reflashing CM11s fastboot image over it cause problem. I think it should not, because fastboot image replace all things. What's your opinion?
Had the same problem. Try first leave it charging for 12 hours after that plug it in. Then get into fastboot this is not easy. Just hold vol up and power together for atv least 5 Sec.
Sent from my A0001 using XDA Free mobile app
I guess its possible. But I would do what falastine said. Charge it for some time. With a soft brick it may not show anything on the screen but could actually be on. So be patient trying to get the toolkit to find the phone. I've heard in another thread someone's phone did in fact connect but nothing was on the screen
Sent from my A0001 using Tapatalk
any progress on this? i think the exact same thing happened to me. was trying to flash back to CM11s using fastboot, but it died. now i dont get anything at all. no response to the chrager, or the computer or anything.
ive tried holding the power button, holding the vol keys with the pwr button, but no avail.
let me know if you figured it out!
Falastine said:
Had the same problem. Try first leave it charging for 12 hours after that plug it in. Then get into fastboot this is not easy. Just hold vol up and power together for atv least 5 Sec.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I left the phone in charge for 24 hours using original charger and wire.
Tried long presses for multiple times - nothing happens.
Tried vol up/ vol down combinations with power button for long nothing happens.
I am now waiting for 12 hours and then will plug it again, as some thread said.
In between I'm trying to download a tool from here : http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
I hope it detects my phone.
hassan3216 said:
any progress on this? i think the exact same thing happened to me. was trying to flash back to CM11s using fastboot, but it died. now i dont get anything at all. no response to the chrager, or the computer or anything.
ive tried holding the power button, holding the vol keys with the pwr button, but no avail.
let me know if you figured it out!
Click to expand...
Click to collapse
There is no progress.
It appears that we are in same situation.
I highly suspect dead battery, instead of dead phone. Anyway, I'll post updates.
Please, share if anything works for you.
I had the same problem and had to restore the phone with this tool:
https://forums.oneplus.net/threads/...ol-restore-stock-cm11s-fix-bricks-etc.237827/
I had many problems with the drivers and i had tot install the qualcom drivers http://sciencespaces.com/search/Qualcomm+HS-USB+Android+DIAG+9018/
The topic said that there is an issue with the modem and you have tot flash it manually but i don't have problems so far.
michaeldepotter said:
I had the same problem and had to restore the phone with this tool:
https://forums.oneplus.net/threads/...ol-restore-stock-cm11s-fix-bricks-etc.237827/
I had many problems with the drivers and i had tot install the qualcom drivers http://sciencespaces.com/search/Qualcomm+HS-USB+Android+DIAG+9018/
The topic said that there is an issue with the modem and you have tot flash it manually but i don't have problems so far.
Click to expand...
Click to collapse
@michaeldepotter
Thanks for writing here.
I'm following the thread mentioned by you.
But, the problem is that I don't know how to get the phone in Qualacom mode.
I don't whether my phone is on or off. So, I've tried to connect it with PC and pressing key mentioned in the thread. It didn't work.
If you could share your experience with me, it will be kind of you.
I've windows 8.1 64 bit.
I'm at work now but in a couple of hours i can give you more info how i did it
Sent from my A0001 using XDA Free mobile app
michaeldepotter said:
I'm at work now but in a couple of hours i can give you more info how i did it
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
@michaeldepotter,
Sure, no problem.
I'll be eagerly waiting.
mahastat said:
@michaeldepotter
Thanks for writing here.
I'm following the thread mentioned by you.
But, the problem is that I don't know how to get the phone in Qualacom mode.
I don't whether my phone is on or off. So, I've tried to connect it with PC and pressing key mentioned in the thread. It didn't work.
If you could share your experience with me, it will be kind of you.
I've windows 8.1 64 bit.
Click to expand...
Click to collapse
open your device manager in your pc and use volume up and power button while connected to pc to get into qualcom mode.most probably it would be detected as android fastboot interface just click on it and update the driver to qualcom usb serial interface then use http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851 this tool to recover
wilbur2brooks said:
open your device manager in your pc and use volume up and power button while connected to pc to get into qualcom mode.most probably it would be detected as android fastboot interface just click on it and update the driver to qualcom usb serial interface then use http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851 this tool to recover
Click to expand...
Click to collapse
@wilbur2brooks
Thanks for writing.
I could understand that once my phone is detected as even unknown device, I can install drivers and try to recover through the tool you mentioned.
But, the problem is that my phone is not recognized as anything. The Device Manager shows no reaction when I connect the phone to computer.
I have disabled driver signature on my Windows 8.1 64 bit. I've Qualacom drivers installed. Rebooted computer in disabled signature mode.
I've connected my device through official cable and I've tried the key combination mentioned.
My other devices show up when connected to PC, but 1+1 doesn't.
Any other thing which I could try.
I had left my phone in charging for 24 hours, but it doesn't wake it up.
Any suggestion is appreciated.
mahastat said:
@michaeldepotter
Thanks for writing here.
I'm following the thread mentioned by you.
But, the problem is that I don't know how to get the phone in Qualacom mode.
I don't whether my phone is on or off. So, I've tried to connect it with PC and pressing key mentioned in the thread. It didn't work.
If you could share your experience with me, it will be kind of you.
I have windows 8.1 64 bit.
Click to expand...
Click to collapse
So this is how i did it.
1. install the drivers from OPO (located in the .zip file from this tool https://forums.oneplus.net/threads/t...ks-etc.237827/ )
2. Open your device manager (Start - right click on computer - properties - devices manager)
3. Press on power + vol up for like 10 sec until you see a device showing up (called QHSUSB_BULK)
4. Download the qualcomdriver ( https://www.dropbox.com/s/vgujdut93m341qm/Qualcomm 2012.rar?dl=0 ). Right click on this devices and click on "Update Driver Software" -> "Browse my computer for driver software" -> locate the Qualcomm 2012\fre\Windows7 8 or vista folder depending on your setup. Update the driver.
5. Now the OPO tool should recognize your device. I turn off all my network connections so the usb device can't find other drivers. (in case windows overwrite the driver).
---------- Post added at 07:29 PM ---------- Previous post was at 07:07 PM ----------
Have you tried another PC?
Sent from my A0001 using XDA Free mobile app
michaeldepotter said:
So this is how i did it.
1. install the drivers from OPO (located in the .zip file from this tool https://forums.oneplus.net/threads/t...ks-etc.237827/ )
2. Open your device manager (Start - right click on computer - properties - devices manager)
3. Press on power + vol up for like 10 sec until you see a device showing up (called QHSUSB_BULK)
4. Download the qualcomdriver ( https://www.dropbox.com/s/vgujdut93m341qm/Qualcomm 2012.rar?dl=0 ). Right click on this devices and click on "Update Driver Software" -> "Browse my computer for driver software" -> locate the Qualcomm 2012\fre\Windows7 8 or vista folder depending on your setup. Update the driver.
5. Now the OPO tool should recognize your device. I turn off all my network connections so the usb device can't find other drivers. (in case windows overwrite the driver).
---------- Post added at 07:29 PM ---------- Previous post was at 07:07 PM ----------
Have you tried another PC?Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
The hard part is that I could not get the phone detected by PC as anything.
I followed the same key combination which you mentioned. It doesn't help.
Can you tell me if battery is totally depleted, will it be possible for phone to be detected?
I've tried to charge my phone with various chargers and power banks. The battery stays cold, the charger stays cold, power bank blinks and get depleted, but phone is not vibrating even on long press.
I've tried on virtual PC, a XP machine. And on other real XP PC.
Thanks for your help.
If you have some more suggestions based on information given by me, kindly post it again.
mahastat said:
@wilbur2brooks
Thanks for writing.
I could understand that once my phone is detected as even unknown device, I can install drivers and try to recover through the tool you mentioned.
But, the problem is that my phone is not recognized as anything. The Device Manager shows no reaction when I connect the phone to computer.
I have disabled driver signature on my Windows 8.1 64 bit. I've Qualacom drivers installed. Rebooted computer in disabled signature mode.
I've connected my device through official cable and I've tried the key combination mentioned.
My other devices show up when connected to PC, but 1+1 doesn't.
Any other thing which I could try.
I had left my phone in charging for 24 hours, but it doesn't wake it up.
Any suggestion is appreciated.
Click to expand...
Click to collapse
Even if your battery is depleted it should get detected in your machine when u press volume up and power while its connected to your pc.hold it for a minute this combination should show something also keep your pc volume up to hear any port connect discconect sounds.If this doesnt happen then your hardware is dead no other option but try to give it to opo for service.
So, nothing ever comes on the screen? Does the phone vibrate if you hold the power button for 20 seconds? If so, this might be of help, if it sounds like it's bricked: http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
wilbur2brooks said:
Even if your battery is depleted it should get detected in your machine when u press volume up and power while its connected to your pc.hold it for a minute this combination should show something also keep your pc volume up to hear any port connect discconect sounds.If this doesnt happen then your hardware is dead no other option but try to give it to opo for service.
Click to expand...
Click to collapse
I've PC volume UP, device manager in front and phone connect. Key combination brings nothing.
So, I think I'll take it to OPO Service Center now.
Thanks for helping me.
netbuzz said:
So, nothing ever comes on the screen? Does the phone vibrate if you hold the power button for 20 seconds? If so, this might be of help, if it sounds like it's bricked: http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
Nothing comes on screen, no vibrations. It's bricked.
Going to OPO Service Center.
Thanks for looking after my problem.
I appreciate all who took part in this thread to help me. Thanks.
Moderators may close this thread now.
Hi friends,
My phone is not booting in fastboot and its not evenshowin device manager. and it is not even turning on Please Help me guys.
Check USB micro jecket
Sent from my V70 using XDA Free mobile app
What happens when you try "hold + volume up button"? When you plug the device into the computer, does it read?
Sent from my SHIELD Tablet using XDA Free mobile app
Thejimmynguyen said:
What happens when you try "hold + volume up button"? When you plug the device into the computer, does it read?
Sent from my SHIELD Tablet using XDA Free mobile app
Click to expand...
Click to collapse
My Phone is not responding. My Phone is in Hardbrick mod. how do i unbrick my phone
You tryed to push and hold all buttons at the same time for many seconds? Sometimes it can work again. But you dont gave us many information what you did that it got bricked and what you tryed to unbrick it
Julsen1985 said:
You tryed to push and hold all buttons at the same time for many seconds? Sometimes it can work again. But you dont gave us many information what you did that it got bricked and what you tryed to unbrick it
Click to expand...
Click to collapse
i think i messed up with Fastboot of My Honor6 H60-L04. i think Fastboot got erased.
Symptoms:No chargning symbol, No vibration and it not detecting in My PC :crying::crying::crying::crying:
Sorrym then I do not have a clue when nothing happens when u connect the phone with your pc
It is worth one more try if you haven't, to get into fast boot mode from a power off state.
Press and hold volumn down, plug in USB cable, until it turns on.
---------- Post added at 05:23 PM ---------- Previous post was at 05:19 PM ----------
Did you fastboot erase bootloader and reboot without first refresh another bootloader first?
I deleted the launcher that came with the phone to save space because I had nova launcher installed, it is a mtk phone and I dont have recovery. It was acting up this morning so I did a factory reset, stupid Chinese mtk people decided not to put a setup on this thing so I am not signed into my google account, my sim is not activated and spflashtools cant see my phone i cant use mtkdroidtools as i use linux. PLEASE HELP
Your phone can turn on or not
It turns on but stays at the boot screen as the launcher has been deleted
did you enabled usb debugging if so you can use a pc to solve this problem
and i do not get what no usb debug sim not working means
ndemon said:
I deleted the launcher that came with the phone to save space because I had nova launcher installed, it is a mtk phone and I dont have recovery. It was acting up this morning so I did a factory reset, stupid Chinese mtk people decided not to put a setup on this thing so I am not signed into my google account, my sim is not activated and spflashtools cant see my phone i cant use mtkdroidtools as i use linux. PLEASE HELP
Click to expand...
Click to collapse
If you can go into recovery you can use USB Debugging. Then go to recovery. Plug your phone into the computer and get the stock launcher. Now do
Code:
adb root
adb push launcher.apk /System/App
Now reboot. Make sure that you have root and that you have the right launcher file (the one you got with the phone)
He has no recovery by the way
Fastboot? Bootlader? Anything?
Yes you can use fastboot and your pc android debugging bridge to push any launcher apk to your system.
But for that you have to setupbyoue adb and fastboot driver on your pc
---------- Post added at 02:30 PM ---------- Previous post was at 02:29 PM ----------
Can you tell me which device you have
droid_god said:
Yes you can use fastboot and your pc android debugging bridge to push any launcher apk to your system.
But for that you have to setupbyoue adb and fastboot driver on your pc
---------- Post added at 02:30 PM ---------- Previous post was at 02:29 PM ----------
Can you tell me which device you have
Click to expand...
Click to collapse
I have this http://www.amazon.com/ZGPAX-Android-1-54inch-Multi-point-Bluetooth/dp/B00OPO984G it runs android 4.4.2 and there’s no recovery and I have no idea how to get into fastboot, ADB wont even see the device.
EDIT: And I use linux, so I wont have to set up drivers because the linux kernel includes them.
Did that watvh have a volume hard keys on it or not
i can do any thing except damaging your device. GOD DOES NOT DO THAT
droid_god said:
Did that watvh have a volume hard keys on it or not
i can do any thing except damaging your device. GOD DOES NOT DO THAT
Click to expand...
Click to collapse
It has a volume up key, a power key and a soft home button, menu button and back button. But no volume down.
Just power off and press both hard keys and see what happens
i can do any thing except damaging your device. GOD DOES NOT DO THAT
droid_god said:
Just power off and press both hard keys and see what happens
i can do any thing except damaging your device. GOD DOES NOT DO THAT
Click to expand...
Click to collapse
It starts booting and then gets stuck, as always
I cant even see notifications
The device is having a sence that an sd card is inserted and oops it reboots.
This is happening with every sd card
i can do any thing except damaging your device. GOD DOES NOT DO THAT
Lmfao sucks for u xD
Hmm than its a hardware problem can nly be reapired
i can do any thing except damaging your device. GOD DOES NOT DO THAT
droid_god said:
Hmm than its a hardware problem can nly be reapired
i can do any thing except damaging your device. GOD DOES NOT DO THAT
Click to expand...
Click to collapse
It isn't a hardware problem as I explained in the first post.