Database Info

[q] please help...!!! Firmware error

i wasnt thinking and starting to flash kj6 and kc1 on my wife phone...and she already had kj6...i was using odin...and it just stopped and didnt finish...so i took it out now on her phone it says...firmware upgrade encountered an issue...please select recovery mode in and try again......what do i do...it doesnt have cwm...so how do i get in recovery....and fix this...??????????please help...she soooooo mad at me...thanks in advance...
edit...at first it wasnt reconizing my phone...now i got it to...but it says samsung usb- composite device... but when i plug in to keis...it wont reconize it...and in odin...is just stuck on "set-up connection...what can i do...?

phordych05 said:
i wasnt thinking and starting to flash kj6 and kc1 on my wife phone...and she already had kj6...i was using odin...and it just stopped and didnt finish...so i took it out now on her phone it says...firmware upgrade encountered an issue...please select recovery mode in and try again......what do i do...it doesnt have cwm...so how do i get in recovery....and fix this...??????????please help...she soooooo mad at me...thanks in advance...
Click to expand...
Click to collapse
Power it down. Hold the Volume Up, Volume Down, and Power keys down. Don't let them go. When the phone shows the Galaxy S screen, then you see that screen get a little bit brighter, only let go of the Power key. Hold Volume Up & Volume Down until you see the recovery screen.
I think all you really need to do is get it back into download mode and either reflash KJ6 with ODIN or use one of the one-click ROMs by bhundven.
---------- Post added 8th January 2012 at 12:04 AM ---------- Previous post was 7th January 2012 at 11:47 PM ----------
phordych05 said:
edit...at first it wasnt reconizing my phone...how i got it to know its my phone but when i plug in to keis...it wont...and odin...is just stuck on "set-up connection...what can i do...?
Click to expand...
Click to collapse
Does it recognize your phone now? If so, what is on the screen of the phone?

stephen_w said:
Power it down. Hold the Volume Up, Volume Down, and Power keys down. Don't let them go. When the phone shows the Galaxy S screen, then you see that screen get a little bit brighter, only let go of the Power key. Hold Volume Up & Volume Down until you see the recovery screen.
I think all you really need to do is get it back into download mode and either reflash KJ6 with ODIN or use one of the one-click ROMs by bhundven.
---------- Post added 8th January 2012 at 12:04 AM ---------- Previous post was 7th January 2012 at 11:47 PM ----------
Does it recognize your phone now? If so, what is on the screen of the phone?
Click to expand...
Click to collapse
when i hold the 2 volume buttons down then power...it wont start up...it just shows a pic of a phone then a triangle with a "! " in it...then a computer...and says...firmware upgrade encountered a issue. please select recovery mode in kies and try again...but i cant get in recovery mode...????????????????????H...E...L...P....!!!!!!
IT WONT RECONIZE it as a phone...so im screwed aint i...it says samsung usb composite device...

Uninstall Odin. Uninstall kies. follow my guide
http://forum.xda-developers.com/showthread.php?t=1422824
Odin is unstable
Sent from my SGH-T959V using XDA App

i think...its bricked...
stephen_w said:
Power it down. Hold the Volume Up, Volume Down, and Power keys down. Don't let them go. When the phone shows the Galaxy S screen, then you see that screen get a little bit brighter, only let go of the Power key. Hold Volume Up & Volume Down until you see the recovery screen.
I think all you really need to do is get it back into download mode and either reflash KJ6 with ODIN or use one of the one-click ROMs by bhundven.
---------- Post added 8th January 2012 at 12:04 AM ---------- Previous post was 7th January 2012 at 11:47 PM ----------
Does it recognize your phone now? If so, what is on the screen of the phone?
Click to expand...
Click to collapse
when i hold the 2 volume buttons down then power...it wont start up...it just shows a pic of a phone then a triangle with a "! " in it...then a computer...and says...firmware upgrade encountered a issue. please select recovery mode in kies and try again...but i cant get in recovery mode...????????????????????H...E...L...P....!!!!!!

phordych05 said:
when i hold the 2 volume buttons down then power...it wont start up...it just shows a pic of a phone then a triangle with a "! " in it...then a computer...and says...firmware upgrade encountered a issue. please select recovery mode in kies and try again...but i cant get in recovery mode...????????????????????H...E...L...P....!!!!!!
Click to expand...
Click to collapse
This looks like another download mode screen.
See my post above
Sent from my SGH-T959V using XDA App

Bassmanjames said:
Uninstall Odin. Uninstall kies. follow my guide
http://forum.xda-developers.com/showthread.php?t=1422824
Odin is unstable
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
edit...sry...link just popped up...

phordych05 said:
when i hold the 2 volume buttons down then power...it wont start up...it just shows a pic of a phone then a triangle with a "! " in it...then a computer...and says...firmware upgrade encountered a issue. please select recovery mode in kies and try again...but i cant get in recovery mode...????????????????????H...E...L...P....!!!!!!
Click to expand...
Click to collapse
No, the phone!triangle is another screen for "download mode".
You are in download mode.
You must have the cable connected to the pc and phone, then start your phone to this mode. Don't plug in the cable after the phone is already in this mode, or it won't detect it (sometimes...).
Follow Bassmanjames's guide that uses my heimdall one-click. Promise

bhundven said:
No, the phone!triangle is another screen for "download mode".
You are in download mode.
You must have the cable connected to the pc and phone, then start your phone to this mode. Don't plug in the cable after the phone is already in this mode, or it won't detect it (sometimes...).
Follow Bassmanjames's guide that uses my heimdall one-click. Promise
Click to expand...
Click to collapse
no...its a different triangle...im NOT in download mode...nor can i get it in download mode...its a tiny triangle with an !! in the middle with a pic of a phone on one side and a pic of a computer on the other...i know all about download mode and recovery which it wont go into...IM SCREWED...AINT I...??? AND I CANT DO BASSMANS HEIMDALL cause i cant get the phone in download mode...??????????????????

phordych05 said:
no...its a different triangle...im NOT in download mode...nor can i get it in download mode...its a tiny triangle with an !! in the middle with a pic of a phone on one side and a pic of a computer on the other...i know all about download mode and recovery which it wont go into...IM SCREWED...AINT I...??? AND I CANT DO BASSMANS HEIMDALL cause i cant get the phone in download mode...??????????????????
Click to expand...
Click to collapse
if your phone was "hard bricked" you wouldn't see anything on the screen. Your phone would act dead.
Your phone is soft-bricked. I know what you are seeing on your screen.
Trust me. Open the back of your phone. Pull the battery. Count to 10. Plug the battery back in. Put the battery cover back on. Plug the usb cable into your computer. Hold vol+ and vol- and plug the usb cable into your phone. Keep holding vol+ and vol- till you either see the triangle or dl mode. Either way, Heimdall should detect it as being connected. If not, you need to make sure the odin drivers are truely uninstalled and the heimdall driver is installed correctly. I don't use windows, so you'll need to find help elsewhere on that.

phordych05 said:
no...its a different triangle...im NOT in download mode...nor can i get it in download mode...its a tiny triangle with an !! in the middle with a pic of a phone on one side and a pic of a computer on the other...i know all about download mode and recovery which it wont go into...IM SCREWED...AINT I...??? AND I CANT DO BASSMANS HEIMDALL cause i cant get the phone in download mode...??????????????????
Click to expand...
Click to collapse
+1 this is download mode
Sent from my SGH-T959V using XDA App

phordych05 said:
edit...sry...link just popped up...
Click to expand...
Click to collapse
My guide it's too new to be in the Bible yet and the OP of the Bible no longer owns this device so he is slow to update it. You are more than welcome to submit a link to him so he can add it at his leisure
Sent from my SGH-T959V using XDA App

Bassmanjames said:
My guide it's too new to be in the Bible yet and the OP of the Bible no longer owns this device so he is slow to update it. You are more than welcome to submit a link to him so he can add it at his leisure
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
o.k...so...i dont know what just happened...but i was doing baseman heimdall way and while i was waiting for the oneclick jar file to download i was looking at the heimdall program and i clicked on the utilities tab and clicked on "detect device" and it found my device so i was happy. so for some reason i decided to click on the next option to the right which is " close PC screen"...i clicked on close and then all of a sudden my phone just rebooted itself and now its seems totally fine, lmfao! does anyone know what happened? is it because i thought it froze and pulled it out while it was still downloading in odin? and why did clicking "close pc screen" make my phone reboot? im gonna unplug and check out my phone to make sure everything is good with it. Ill get back to you guys soon. Thanks for all the quick responses to my problem, I was super skitzed about it! I really appreciate you guys thanks for your time... ;-)

phordych05 said:
o.k...so...i dont know what just happened...but i was doing baseman heimdall way and while i was waiting for the oneclick jar file to download i was looking at the heimdall program and i clicked on the utilities tab and clicked on "detect device" and it found my device so i was happy. so for some reason i decided to click on the next option to the right which is " close PC screen"...i clicked on close and then all of a sudden my phone just rebooted itself and now its seems totally fine, lmfao! does anyone know what happened? is it because i thought it froze and pulled it out while it was still downloading in odin? and why did clicking "close pc screen" make my phone reboot? im gonna unplug and check out my phone to make sure everything is good with it. Ill get back to you guys soon. Thanks for all the quick responses to my problem, I was super skitzed about it! I really appreciate you guys thanks for your time... ;-)
Click to expand...
Click to collapse
interesting. Will have to look into that. Glad to be helpful. Hope your wife is happy too
Sent from my SGH-T959V using XDA App

Disater strikes

I tryed to load AOKP rom from this thread in the devlopement section [ROM][29.APR.2012][3G]AOKP (Android Open Kang Project) *OFFICIAL* [v2.1] Milestone 5!Thread. Any way I ended up in the recovery loop that they talked about. I figured no problem just flash my CMW backup. Well recovery dosent see any files to recover. Great. I hook up to my computer to fix by ADB but my computer will not reconize my TF101. Tryed to do the power button + vol up but once again computer fails to see the TF101. I have verified with anorther TF101 that my computer will see it. Have also tried multible cables with same results. So it appears my beloved TF101 has a bad connector although it does still charge. Anyway is there any other way to get out of this recovery loop. I am out of my warrenty period to have the connector fixed.

Does the computer see the tf101 in APX mode?

Well if you can Cold-Boot adb over network may save you. otherwise you need working usb
---------- Post added at 08:53 PM ---------- Previous post was at 08:39 PM ----------
APX mode use NvFlash?

can you explain how to do this.

At reboot hold volume - and power button , when white text appears in left upper corner let go of the buttons and wait for it too cold boot

Boot looping on the Eee Pad Screen

Hey guys,
So I looked tried to charge my tablet one day, and it decided to boot loop to the Eee pad screen and continue to do that. I tried to enter recovery and it then tried to restore a backup that I had, it said there was some kind of error and CWM wouldn't work after that. I tried doing a cold reboot but nothing worked. Also I tried EasyFlash and I don't think I did that right either. I was on CM 10 before this happened with Rogue Recovery. What are the steps that I need to take in order to get my tablet up and running again.
PS: I know that there are threads about bootlooping but none of them helped much.

I would love some help...:crying:

Try easy flasher again, it will work.. what problems you faced when u used easy flash?
Sent from my Transformer using xda app-developers app

udupa82 said:
Try easy flasher again, it will work.. what problems you faced when u used easy flash?
Sent from my Transformer using xda app-developers app
Click to expand...
Click to collapse
It seems like I can't get it into apx mode properly. I installed the drivers and when I plug it in it shows nvidia... under USB universal in device manager. Not sure what I am doing wrong.
Sent from my MB865 using Tapatalk

Hi.
I have had this problem for four times after trying to flash to a custom ROM, and now my tablet is perfectly functionable.
If you used EasyFlasher to get a custom ROM and now it's bootlooping OR if you tried to root your device and its bootlooping OR if you do not know what you have to do, then check the ways below:
====================
W1:
Power up the device. When it starts bootlooping, hold both Power + Volume DOWN buttons until it will say that you should press volume up or it will enter RCK mod. When that will appear, do nothing. Just let it enter RCK mod and it should wprk. If not, then do W2.
W2:
Look under your TF101 and see if the S/N starts with B60 or under or B90. Start EasyFlasher and select the FIRST button at launch if it is B60 or under or the second if you have B90. In the EasyFlasher's folder you will see a folder with a name like "update" or "puthere". Now go to Asus' TF101 page, to downloads (Link coming soon, until then try to find it) and select the latest (first you find) firmware.Do NOT use a custom rom or you will hard brick it! Download it to the folder I said above. DO NOT EXTRACT IT. Now, make sure your tablet is at least 50% charged so it can successfully flash the stock rom. Then, connect it to your PC and press the Power + Volume UP buttons on your tablet for like 10 seconds. There must be now a NVIDIA driver in your Device Manager. Go back to EasyFlasher and press "Flash/Unbrick/Root". If anything pops up, check carefully what it says. It will probably say to be sure it is in APX mode and if you want to cpntinue. Press yes or OK. A CMD box will appear, exxtracting the firmware you put in that folder. Let the PC and the tablet do it's work. Do not use the tablet while this happens or it may really becolme unusable forever. After it extracts, another CMD box will pop up, flashing the stock fw. If EasyFlasher will say something like "system.bin - 0kb" then the update will fail and your tablet will get HARD BRICKED. In this case, PM me and I will help you. Okay. Now, your TF101's screen should turn on and say "!!!UPDATE SUCCESSFULL!!!" for like three times, and all the CMD windows from your PC should dissapear. The EasyFlasher should now stop installing the fw. Hold your tablet's power button for 5-10 seconds and release. You should now be able to start your device without bootloops. If there still are bootloops, then, do the W1.
====================
I have had alot of experience in bricked tablets, and those ways should wor. For more infos or TeamViewer help, PM me.
I hope I helped,
Kevin.
Sent from my Transformer TF101 using xda app-developers app
---------- Post added at 04:23 PM ---------- Previous post was at 04:19 PM ----------
kindacrazyazn said:
It seems like I can't get it into apx mode properly. I installed the drivers and when I plug it in it shows nvidia... under USB universal in device manager. Not sure what I am doing wrong.
Sent from my MB865 using Tapatalk
Click to expand...
Click to collapse
When it says to make sure that you are in APX mode, just hold Power + Vol UP buttons for 10 seconds then press ok. The drivers you have must show up as a NVIDIA driver in Device Manager when you hold that buttons. Do what I said in the previous post, it helped me four times lol.
Sent from my Transformer TF101 using xda app-developers app

[Q] [Q need urgent help Please] My Phone is Not Booting in fastboot

Hi friends,
My phone is not booting in fastboot and its not evenshowin device manager. and it is not even turning on Please Help me guys.

Check USB micro jecket
Sent from my V70 using XDA Free mobile app

What happens when you try "hold + volume up button"? When you plug the device into the computer, does it read?
Sent from my SHIELD Tablet using XDA Free mobile app

Thejimmynguyen said:
What happens when you try "hold + volume up button"? When you plug the device into the computer, does it read?
Sent from my SHIELD Tablet using XDA Free mobile app
Click to expand...
Click to collapse
My Phone is not responding. My Phone is in Hardbrick mod. how do i unbrick my phone

You tryed to push and hold all buttons at the same time for many seconds? Sometimes it can work again. But you dont gave us many information what you did that it got bricked and what you tryed to unbrick it

Julsen1985 said:
You tryed to push and hold all buttons at the same time for many seconds? Sometimes it can work again. But you dont gave us many information what you did that it got bricked and what you tryed to unbrick it
Click to expand...
Click to collapse
i think i messed up with Fastboot of My Honor6 H60-L04. i think Fastboot got erased.
Symptoms:No chargning symbol, No vibration and it not detecting in My PC :crying::crying::crying::crying:

Sorrym then I do not have a clue when nothing happens when u connect the phone with your pc

It is worth one more try if you haven't, to get into fast boot mode from a power off state.
Press and hold volumn down, plug in USB cable, until it turns on.
---------- Post added at 05:23 PM ---------- Previous post was at 05:19 PM ----------
Did you fastboot erase bootloader and reboot without first refresh another bootloader first?

Huawei Y530-U00 hard bricked

Hi, my phone is hard bricked. I dont know why but phone is completly dead. It douesnt react on power button or vol + - and power buton etc. Only if I connect it into the PC I will get QHSUSB_BULK driver installing and after that care suite emergency connectivity is installed. Can you help me with unbricking? I have another one running OK. I have bricked by flashing I think.
The story
1. phone is telling me something about no boot / bootloader / partitions
2. I download "dload" folder with "update.app" to the SD card and start flashing - OK (B189 I think)
3. trying to testing and after that I use wipe/factory reset
4. reboot
5. unplug battery
6. plug battery in
7. next day phone is completly dead
I will apriciate any help. Thank you

I also try a others battery but there is no charging led light. Phone doesnt react on any button. Can you help me please?

Wow, this is a tough one. I'm pretty good with restoring phones and this has me baffled. I don't understand how you managed to do this. Fill me in on what you were doing at the time you bricked the device.
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
---------- Post added at 10:41 AM ---------- Previous post was at 09:53 AM ----------
Hold together:*Power Button + Volume Up Button*for several seconds. And tell me if that does anything to the device (must be decently charged to work)
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app

TechGuyAnthony said:
Wow, this is a tough one. I'm pretty good with restoring phones and this has me baffled. I don't understand how you managed to do this. Fill me in on what you were doing at the time you bricked the device.
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
---------- Post added at 10:41 AM ---------- Previous post was at 09:53 AM ----------
Hold together:*Power Button + Volume Up Button*for several seconds. And tell me if that does anything to the device (must be decently charged to work)
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
Click to expand...
Click to collapse
Nothing. I pplug in into the charger 5V 2.1A for 4 hours, after that try another charger with another USB cable. But there is no notification (LED or information on LCD) about charging. Phone is completly dead. It doesnt react on any button or any combination (try to hold for 1 minute every combination). But if I plug in into the PC that I see care suite emergency connectivity

Ya. I've had a phone like this before. There was nothing I could to revive it. Start considering replacements... [emoji13]
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app

Thank you for your support. On the second phone which I repair by firmware upgrade is no IMEI in system. How can I recover IMEI on this phone?

bajlek said:
Thank you for your support. On the second phone which I repair by firmware upgrade is no IMEI in system. How can I recover IMEI on this phone?
Click to expand...
Click to collapse
Re-flash by dload and everything is now fine

How do you solved? My phone won't start.

msm8210 files needed
I have the same problem...
Does anyone could provide the unbrick files for Y530-U00 to use with QFIL ??
We need
MPRG8210.HEX
8210_msimage.mbn
rawprogram0.xml
patch0.xml
Click to expand...
Click to collapse
Thank you!

Did u find a solution?
---------- Post added at 05:55 PM ---------- Previous post was at 05:54 PM ----------
I need some files if someone wants to extract that files for me

bajlek said:
It doesnt react on any button or any combination
Click to expand...
Click to collapse
So that means, that the preloader is bricked. Because if it would react on any button (Volume Up, Volume Down, Power), then it would normally react. For those buttons are being handled by the preloader partition file. If you either flashed the preloader from a wrong ROM (Like I did one time on Wiko Lenny 3), then no button will react. Those buttons are being handled by their ID's (I think, not sure). Preloader handles the Button ID if it is pressed. If yes, preloader will detect the clicked button and handle the action (for example: Clicking the power button when Display is off → Makes the Display to go on).
If the preloader is bricked, then either you need a new phone or reflash the preloader.

Huawei Y530 Bricked too
So heres what happened:
Phone didnt boot and showed a recovery, boot image verify failed.
-i copied original firmware for this model (i used right one) to sdcard and updated from it.
When the update was finishing the phone was stuck.
-I tryed to turn on the phone but i cant.
Plugged it into PC, reflashed but still its dead.
Anyone, help please