Database Info

[Q] how to flash revert samsung galaxy s to stock rom

i bricked my samsung galaxy s froyo.jpkb1
i got a jig and its in download mode, now, what do i flash it with?
please help

search xda or samsung for your stock rom and flash it

but ive been trying to do tat for a loonng time...can u find it for me??

fazemahn said:
i bricked my samsung galaxy s froyo.jpkb1
i got a jig and its in download mode, now, what do i flash it with?
please help
Click to expand...
Click to collapse
Here it is.
http://forum.xda-developers.com/showthread.php?t=1004647

but der is no jpkb1 for froyo...will a xxkb1 work??

fazemahn said:
but ive been trying to do tat for a loonng time...can u find it for me??
Click to expand...
Click to collapse
check this vid
http://www.youtube.com/watch?v=pKS6zEkIydM

but i am downloading xxkb1... can i flas it onto my device??
mines actually a jpkb1

Stock Firmware
Here's a download of the latest Stock XWJW1 Firmware, with Odin included to flash the three files to your mobile with the xx512.pit file. Mind you, you may need to check [x] Repartition in Odin and make sure you put the right file in the right field for flashing.
Put your phone in Download-mode by Pressing and Holding Power+VOL.Down+Home, let go of the Power-key as the phone boots, but keep pressing Vol.Down+Home. Attach your phone, and flash away.
Link:
rapidshare.com/#!download|909tl2|3995540760|3file_PDA_I9000XWJW1_CSC_OXXJV9_MODEM_I9000XXJVT_ROOTED_stock_.zip

[Q] flashing Galaxy S4.. PLEASE HELPP

hello,
i rooted my galaxy s4 and ever since that, i keep getting the error "system UI has stopped".. so after doing a lot of research i found that only way to fix this is by flashing stock rom. so i need to flash UCUEMK2 into my SGH-I337 AT&T phone via odin. im not sure if i should include a PIT file along with the AP file? what should i do?
i dont want to brick this phone again, so someone please help me..
i would really appreciate your help. thank you!

luckyd8 said:
hello,
i rooted my galaxy s4 and ever since that, i keep getting the error "system UI has stopped".. so after doing a lot of research i found that only way to fix this is by flashing stock rom. so i need to flash UCUEMK2 into my SGH-I337 AT&T phone via odin. im not sure if i should include a PIT file along with the AP file? what should i do?
i dont want to brick this phone again, so someone please help me..
i would really appreciate your help. thank you!
Click to expand...
Click to collapse
if you download your stock rom from sammobile or samsungupdates, it will include only the necessary files. if it includes a .pit, use it, otherwise dont. (usually there isnt one)

Kobro said:
if you download your stock rom from sammobile or samsungupdates, it will include only the necessary files. if it includes a .pit, use it, otherwise dont. (usually there isnt one)
Click to expand...
Click to collapse
Sammobile and other sites only have the 4.2.2 version, my phone has the ver 4.3 which i prefer.. So i should include the PIT file? And what are the chances or bricking this phone? Because im just after getting it fixed from a hard brick.. Thank you for your reply

luckyd8 said:
Sammobile and other sites only have the 4.2.2 version, my phone has the ver 4.3 which i prefer.. So i should include the PIT file? And what are the chances or bricking this phone? Because im just after getting it fixed from a hard brick.. Thank you for your reply
Click to expand...
Click to collapse
how did you update to 4.3? if its a custom rom, you can just flash 4.2.2 again, then install the rom. if its by ota or kies, install 4.2.2 and update the same way again.

Kobro said:
how did you update to 4.3? if its a custom rom, you can just flash 4.2.2 again, then install the rom. if its by ota or kies, install 4.2.2 and update the same way again.
Click to expand...
Click to collapse
I dont think its a custom rom.. After i bricked my old motherboard i bought this new one from ebay.. It had 4.3 pre installed from OTA update i think.. Then i rooted the phone and kept getting the "system ui" error, then i unrooted the phone and hard reset it, didnt fix the problem. So im trying to flash UCUEMK2 which my phone already has.. 4.2.2 has many bugs and i cant send apps to memory card in 4.2.2 thats why im trying to get 4.3.. Thanks

luckyd8 said:
I dont think its a custom rom.. After i bricked my old motherboard i bought this new one from ebay.. It had 4.3 pre installed from OTA update i think.. Then i rooted the phone and kept getting the "system ui" error, then i unrooted the phone and hard reset it, didnt fix the problem. So im trying to flash UCUEMK2 which my phone already has.. 4.2.2 has many bugs and i cant send apps to memory card in 4.2.2 thats why im trying to get 4.3.. Thanks
Click to expand...
Click to collapse
so what i would do if i were in your place is download the 4.2.2. and then upgrate via ot or cutom rom. ill also try finding a 4.3 stock rom for you.
EDIT:
couldnt find 4.3 stock rom, youll have to do one of the above steps

Kobro said:
so what i would do if i were in your place is download the 4.2.2. and then upgrate via ot or cutom rom. ill also try finding a 4.3 stock rom for you.
Click to expand...
Click to collapse
I actually already have the PA file for the 4.3 already downloaded to my laptop but the tutorial i used told me to download the PIT file as well, and the comments that tutorial received werent good, and the other tutorials ive seen never used a pit files.. Thats y im confused.. It would be easy to flash 4.2.2 but the problem is i live in Ireland and we didnt get the 4.3 update here yet and i cant use OTA as its locked to AT&T.. Its very confusing i know.. But thank you so much for helping me

luckyd8 said:
I actually already have the PA file for the 4.3 already downloaded to my laptop but the tutorial i used told me to download the PIT file as well, and the comments that tutorial received werent good, and the other tutorials ive seen never used a pit files.. Thats y im confused.. It would be easy to flash 4.2.2 but the problem is i live in Ireland and we didnt get the 4.3 update here yet and i cant use OTA as its locked to AT&T.. Its very confusing i know.. But thank you so much for helping me
Click to expand...
Click to collapse
well, you can try without the .pit, if it dosent work do it again with, its simple. if you brick it, then use the 4..2.2 to uynbrick then try the other method, so no matter what its not a biggie.

Kobro said:
well, you can try without the .pit, if it dosent work do it again with, its simple. if you brick it, then use the 4..2.2 to uynbrick then try the other method, so no matter what its not a biggie.
Click to expand...
Click to collapse
But what if it hard brick my phone again i hard bricked it before trying to flash something using TWRP .. Then i had to spend €100 on a new motherboard ..

luckyd8 said:
But what if it hard brick my phone again i hard bricked it before trying to flash something using TWRP .. Then i had to spend €100 on a new motherboard ..
Click to expand...
Click to collapse
so try without the pit file, if you brick flash tthe 4.2.2 to unbrick.
what do you mean, you actually had to replace a physical piece because of a brick??? never heard of that happening before

Kobro said:
so try without the pit file, if you brick flash tthe 4.2.2 to unbrick.
what do you mean, you actually had to replace a physical piece because of a brick??? never heard of that happening before
Click to expand...
Click to collapse
Yeah if u hard brick it, the phone doesnt do anything.. Not even charge or flash a light.. Its just completely dead.. You could get it unbricked if ur living in USA or UK and few other countries using JTag method but in ireland they dont have the tools to do it, not even the samsung repair shop, so i had to buy a new motherboard.. Thats why im very scared to do this..

luckyd8 said:
Yeah if u hard brick it, the phone doesnt do anything.. Not even charge or flash a light.. Its just completely dead.. You could get it unbricked if ur living in USA or UK and few other countries using JTag method but in ireland they dont have the tools to do it, not even the samsung repair shop, so i had to buy a new motherboard.. Thats why im very scared to do this..
Click to expand...
Click to collapse
you can also get a usb jig off ebay for about $5, just plug it into the port and it boots into odin mode.

Kobro said:
you can also get a usb jig off ebay for about $5, just plug it into the port and it boots into odin mode.
Click to expand...
Click to collapse
You also have to buy a riff box which is about €140

please help!!!

Hi guys, i have the sm-n9005 32gb but in kies emergency backup firmware that appear sm-n900. any one has solution to get it back like normal?? Thanks all

Download the latest firmware from SamMobile, then flash via Odin

haitichtran said:
Hi guys, i have the sm-n9005 32gb but in kies emergency backup firmware that appear sm-n900. any one has solution to get it back like normal?? Thanks all
Click to expand...
Click to collapse
Did you try to flash firmware with Odin and it didn't complete for some reason? I am asking because I was in your situation when I first bought my Note 3 a while ago.
If this is the reason then it may be the Samsung drivers that are missing from your PC. Some drivers are present and the phone was detected but not all drivers needed were installed, hence the flashing process couldn't complete/failed. Try installing the drivers again, even if you think you have done so already (not just the ones that Windows auto installs when you connect your phone), then try to flash the firmware again. Hopefully the procedure will complete this time. It worked for me. Fingers crossed

This_Guyse said:
Download the latest firmware from SamMobile, then flash via Odin
Click to expand...
Click to collapse
yes correct.

HELP....Odin failed during stock firmware flash

please help me, im no noob but im new to samsung devices......I have S6 G920F and had it rooted and custom rom installed ([ROM] [1 May] [AOD9 Base] [G920F] StockMOD6 ~~CleanSlate~~ [v1-02]) now i plan on swapping this device for an HTC M9 and want to return to stock so theres no problem for them doing system update etc....... i got this firmware G920FXXU1AOCY_G920FEVR1AOC1_G920FXXU1AOCW_HOME.tar.md5 and flashed through Odin........which then fails right at the end.......screen is stuck in download mode and when i try to flash through odin again my pc says the device isnt recognised and odin wont connect to it........HELP ME PLEASE

bigpeet666 said:
please help me, im no noob but im new to samsung devices......I have S6 G920F and had it rooted and custom rom installed ([ROM] [1 May] [AOD9 Base] [G920F] StockMOD6 ~~CleanSlate~~ [v1-02]) now i plan on swapping this device for an HTC M9 and want to return to stock so theres no problem for them doing system update etc....... i got this firmware G920FXXU1AOCY_G920FEVR1AOC1_G920FXXU1AOCW_HOME.tar.md5 and flashed through Odin........which then fails right at the end.......screen is stuck in download mode and when i try to flash through odin again my pc says the device isnt recognised and odin wont connect to it........HELP ME PLEASE
Click to expand...
Click to collapse
This has happened to a few people I think they restarted thier pc's and tried again.

I have the same issue.
Help us

rafaelpinaf said:
I have the same issue.
Help us
Click to expand...
Click to collapse
Hi try this Odin

Mr Troop said:
Hi try this Odin
Click to expand...
Click to collapse
I tried with this Odin but didn´t work.
I have the same problem. I tried some firmwares but none work. I really don´t know what to do.

mrhizzo said:
I tried with this Odin but didn´t work.
I have the same problem. I tried some firmwares but none work. I really don´t know what to do.
Click to expand...
Click to collapse
Ok have you tried older build of Odin 3.09
also you might need the pit file to redo the partitions

s6 screen opposite
Please help me my s6 screen working opposite after I unrooted it for example if is select apps it will open phone which is on the opposite side

bigpeet666 said:
please help me, im no noob but im new to samsung devices......I have S6 G920F and had it rooted and custom rom installed ([ROM] [1 May] [AOD9 Base] [G920F] StockMOD6 ~~CleanSlate~~ [v1-02]) now i plan on swapping this device for an HTC M9 and want to return to stock so theres no problem for them doing system update etc....... i got this firmware G920FXXU1AOCY_G920FEVR1AOC1_G920FXXU1AOCW_HOME.tar.md5 and flashed through Odin........which then fails right at the end.......screen is stuck in download mode and when i try to flash through odin again my pc says the device isnt recognised and odin wont connect to it........HELP ME PLEASE
Click to expand...
Click to collapse
read this thread it will fix it for you
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736

Simply use Samsung KIES to restore stock rom .... easiest way to do it
This will remove everything in your phone (make backup first if need)

Winb33 said:
Simply use Samsung KIES to restore stock rom .... easiest way to do it
This will remove everything in your phone (make backup first if need)
Click to expand...
Click to collapse
Smart switch --> new KIES

Turned out I used wrong firmware, managed to hard reboot by holding power button then reflashed correct firmware......then I took the phone back and swapped it for HTC M9

sorry for late reply, I did a hard reboot by holding power button and restarted odin....then flashed the correct file

johanbiff said:
Smart switch --> new KIES
Click to expand...
Click to collapse
i have the same problem, both kies and smartwatch failed to restore stock rom and my device is not listed as a device that needss emergency recovery.

[HELP] Can I safely install stock rom from sammobile?

Hey guys,
I have a rooted J700F with
Knox Warranty Void : 1
can i safely install the stock rom with the use of odin from sammobile?
or is my device gonna brick?
Guys please tell me as this is literally my last phone(if i brick it)(then ill have to use a landline) as i have bricked many phones. and my dad is telling me that he s not gonna give me any more money for all this rooting crap.

stock rom flashing
Yes u can safely flash the stock rom via odin.....if u dont know the process then u can tell me...i ll explain it to u....and if u want i can give u the link of the stock rom......

Thanks for your reply i do know the process (i guess) but i'd like if you explain it to me once again as i don't wanna take any risk!
Thanks in advance!!
I am running J700F on the indian stock rom

First u have to download the stock rom from sammobile.com.....then u have to put the phone into dowload mode.....then connect the phone via usb cable to the pc......u ll get a message that the phone has been added.....then click the ap button on odin and browse to the folder where u have kept the stock rom......that should be the md5 cheksum file.....then wait for some time.....then press the start button....u ll see that nand write will start......congratulations. ....u have finished the process and u are back to the stock rom....i have already done this process for 15 times.....when my phone got stuck into the boot logo.....its a very easy process.... ok.....best of luck....

after flashing will it still show
Knox Warranty Void :1??

Yes....the knox will not work anymore....

Dont use sammobile there is an easier way. Search xda for extracting roms from samsung kies or smartswitch

LoganVye said:
Dont use sammobile there is an easier way. Search xda for extracting roms from samsung kies or smartswitch
Click to expand...
Click to collapse
It's bever work in Bangladesh. I was tired. It wants #recovery code so...