I'm getting problems doing CID to SuperCID :/
/dev/block/mmcblk0p4: cannot open for read: Permission denied
HelP?
@Kakolnolf
You need root
Sent from my K2_CL using Tapatalk
---------- Post added at 07:46 PM ---------- Previous post was at 07:45 PM ----------
In terminal emulator or pc via adb shell you need to type and enter: su
This will give you root access. From this point you can accomplish your goal.
Sent from my K2_CL using Tapatalk
An example...
Sent from my K2_CL using Tapatalk
Related
When i search for an app on the market it always shows screenshots unable to load. What to do help ?
Sent from my GT-I9003 using XDA App
Use an older version of the Market. It will solve the problem!
Use the 2.xx.x version..It is really very reliable!
---------- Post added at 11:10 PM ---------- Previous post was at 11:05 PM ----------
Use an older version of the Market. It will solve the problem!
Use the 2.xx.x version..It is really very reliable!
How to install that market
Sent from my GT-I9003 using XDA App
use any root explorer to replace the vending.apk in system/app
I am trying to root my HTC Inspire 4G 2.3.5, i am on Windows Vista. Whenever i go to run the hack ace by Admin an error message like this pops up in the command prompt....
" file "sc" is missing or corrupt.
Your PC Windows ENV is damaged and should be repaired.
At least one default system file is missing, corrupt
or the Windows PC env has been otherwise compromised.
The Hack Kit quits before damage is done to your phone.
Retry with a different PC or try a 32-bit Ubuntu Linux LiveCD."
Is there something i can do or download to prevent this? or will i just have to use a different PC??
i have ran the Ubuntu and when i try it on there the same message appears in the terminal(command prompt).
PLEASE HELP
Hey liam.... try the advanced ace hack kit irc... #aahkSupport ... i tryed to do some digging into your issue and think they will get you up and running
Sent from my Nexus 7 using Tapatalk 2
Is your phone in debugging mode and fast boot off??
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 05:57 PM ---------- Previous post was at 05:56 PM ----------
Also what firmware is currently on your inspire?
Sent from my Inspire 4G using xda app-developers app
irc?
DJLamontagneIII said:
Hey liam.... try the advanced ace hack kit irc... #aahkSupport ... i tryed to do some digging into your issue and think they will get you up and running
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
i dont know how to get to the aahk irc, i typed it in the search all forums bar and ended up in some chat and i typed my problem and had no replies or anything.
phone
playerjunglejosh said:
Is your phone in debugging mode and fast boot off??
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 05:57 PM ---------- Previous post was at 05:56 PM ----------
Also what firmware is currently on your inspire?
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
my phone is on debugging mode and the fast boot is off, and firmware is 2.3.5 and im aware that i must downgrade to 2.3.3 but i get that error message before i can even get the rooting menu in command prompt.
If you could uninstall all antivirus programs and disable all firewalls...then re-download the AAHK....that could be the problem....
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 06:57 AM ---------- Previous post was at 06:55 AM ----------
Also press ctrl alt delete and stop as many programs that are running in the background...just don't stop the required programs like windows explorer and such as that
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 07:04 AM ---------- Previous post was at 06:57 AM ----------
Also did you install the drivers provided by the AAHK?
Sent from my Inspire 4G using xda app-developers app
Sent from my Galaxy Nexus using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1701862
Sent from my DROID2 GLOBAL using xda app-developers app
This is an easier way and I used this to get root on mine.
http://handytechie.blogspot.com/2012/09/root-droid-2-global-234-45629.html?m=1
Sent from my DROID2 GLOBAL using xda app-developers app
Already rooted using method above but thanks anyway
Sent from my Galaxy Nexus using xda app-developers app
shaneg79 said:
This is an easier way and I used this to get root on mine.
http://handytechie.blogspot.com/2012/09/root-droid-2-global-234-45629.html?m=1
Sent from my DROID2 GLOBAL using xda app-developers app
Click to expand...
Click to collapse
how is that easier?
that had been posted by zyy757back in April
, and was only use before we had magic md5
Sent from my XT862 using xda premium
---------- Post added at 08:51 PM ---------- Previous post was at 08:46 PM ----------
link1.Use RSD to flash offical 608 sbf(dont worry about downgrade,it will unbrick after the next step)
2.Use RSD to flash this repacked 629 sbf(it will flash 629 BL=2 signed boot,recovery,cdt)
3.reboot to recovery,wipe data&cache(Not required if you have important data in it,but if you stuck at bootanimation loop then you have to wipe it)
4.use superoneclick to grant root access(or any zergrush script)
5.install otarootkeeper(can be found in play store,it's free),backup su,then unroot
6.reboot to recovery,reapply 629 OTA update.zip,reboot.(thanks silver6054 for the ota zip link)
7.open otarootkeeper,restore su
Click to expand...
Click to collapse
magic takes about 10mins, and you don't have to temp brick it
---------- Post added at 08:58 PM ---------- Previous post was at 08:51 PM ----------
and it's only a 50mb file
Its easier than making a cd and go through all those steps. I rooted in about 20 min
Sent from my DROID2 GLOBAL using xda app-developers app
Framaroot
Here
Just download the app called Framarot
pick the first option gimli and install superuser
after that just reboot and ready you must have rooted your droid 2 : )
Framaroot work perfectly!
I made root in 3 seconds!
I got a notification this morning on my Droid Maxx for the OTA update that just came out. I told it to install this afternoon. After doing so, my phone rebooted, showed the progress of the update, and then about half way through showed me a form of the Android logo that said "failed" underneath. Ever since that, I cannot get my phone to fully boot. I tried clearing the cache from the recovery mode menu but that had no effect. I also cannot get the phone to boot into safe mode. My phone was not rooted so I'm not exactly sure why there was an issue with the update. Just wandering if anybody has any suggestions on what to do at this point? Worst case scenario I'm assuming I can restore to factory defaults but I would really like to avoid that if possible. Thanks in advance for the help!
Sounds like you should be able to FXZ and retain data to stock then take the update again.
Sent from my XT1080 using xda app-developers app
How do I perform FXZ?
bc760 said:
Sounds like you should be able to FXZ and retain data to stock then take the update again.
Sent from my XT1080 using xda app-developers app
Click to expand...
Click to collapse
Thank you for the suggestion! I'm pretty much a noob at this. Are there any good tutorials you would suggest that demonstrate how to do what you suggested? I found the following site: sbf.droid-developers. org/obake/list.php (had to put spaces in it in order to post it) I began downloading the second file in the list which I'm assuming is the correct one. I've gathered that you have to edit an XML file in package. But I'm not really sure what to edit and I'm not sure about how to get it to my phone. Do I use the Motorola Device Manager or the Android development tools?
You actually do not have to edit them you can use the xt1080 and copy them over. That's what I had thought also but you don't have to edit them.
Sent from my XT1080 using xda app-developers app
---------- Post added at 06:25 PM ---------- Previous post was at 06:25 PM ----------
Use the house of moto guide and the main guide that shows you how to set up
Sent from my XT1080 using xda app-developers app
---------- Post added at 06:26 PM ---------- Previous post was at 06:25 PM ----------
http://forum.xda-developers.com/showthread.php?t=2450702
Sent from my XT1080 using xda app-developers app
If you are trying to not lose you user data, i would remove the line
<step operation="erase" partition="userdata" />
from the .xml file before you try to apply with RSD
bc760 said:
You actually do not have to edit them you can use the xt1080 and copy them over. That's what I had thought also but you don't have to edit them.
Sent from my XT1080 using xda app-developers app
---------- Post added at 06:25 PM ---------- Previous post was at 06:25 PM ----------
Use the house of moto guide and the main guide that shows you how to set up
Sent from my XT1080 using xda app-developers app
---------- Post added at 06:26 PM ---------- Previous post was at 06:25 PM ----------
http://forum.xda-developers.com/showthread.php?t=2450702
Sent from my XT1080 using xda app-developers app
Click to expand...
Click to collapse
You don't have to remove any lines if you are using what is already zipped up, once you run house of moto it gives you the option to keep data.
Sent from my XT1080 using xda app-developers app
I have an HTC Inspire running Cyanogenmod 10.1. Woke up this morning and powered up the phone. Stuck at the boot logo. The volume buttons don't work. I'm pretty sure if I clear the Dalvic cache, I'll be ok. Is there any way to do this, or flash a ROM through USB? Or is there another way to get the phone into recovery mode without using the volume keys?
If your volume buttons aren't fully working, I'm almost absolutely sure you can't. Then again, use a nail to push the volume down as far as you can. See if that works because I've had to do that before
Sent from my Inspire 4G using xda app-developers app
Download ROM manager or goomanager. There are options to boot into recovery on there.
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 02:29 AM ---------- Previous post was at 02:26 AM ----------
Or use adb
Adb reboot recovery;bootloader
Sent from my Inspire 4G using xda app-developers app
The pin idea didn't work. And how can I download rommanager or goomanager if I'm stuck at the boot logo?
Sent from my M470BSA using Tapatalk HD
I also said use adb
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
Pull out the darn battery. Leave out for a minute. Hold down power and volume down..let go of power button while keeping volume down pressed. Let go at boot logo. Try that. Or just try and use your adb. Sounds like using adb is your only option.
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 10:40 AM ---------- Previous post was at 10:38 AM ----------
Give a shoyt out to glevitan. He can help
Sent from my Inspire 4G using xda app-developers app
What he means is you can still send adb commands from the boot animation. Use that to get to recovery, and hopefully you have a touch recovery installed that doesn't require your volume buttons :fingers-crossed:
chrisb906 said:
I also said use adb
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
Pull out the darn battery. Leave out for a minute. Hold down power and volume down..let go of power button while keeping volume down pressed. Let go at boot logo. Try that. Or just try and use your adb. Sounds like using adb is your only option.
Sent from my Inspire 4G using xda app-developers app
Thanks
---------- Post added at 10:40 AM ---------- Previous post was at 10:38 AM ----------
Give a shoyt out to glevitan. He can help
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
Sent from my Inspire 4G using xda app-developers app
chrisb906 said:
I also said use adb
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
Pull out the darn battery. Leave out for a minute. Hold down power and volume down..let go of power button while keeping volume down pressed. Let go at boot logo. Try that. Or just try and use your adb. Sounds like using adb is your only option.
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 10:40 AM ---------- Previous post was at 10:38 AM ----------
Give a shoyt out to glevitan. He can help
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
That is not a good idea. Then I get hundreds of PM and actually the forum is to be used....
---------- Post added at 02:31 PM ---------- Previous post was at 02:29 PM ----------
Shadoevox said:
The pin idea didn't work. And how can I download rommanager or goomanager if I'm stuck at the boot logo?
Sent from my M470BSA using Tapatalk HD
Click to expand...
Click to collapse
Turn off the device completely, then plug it to the pc and try typing adb reboot recovery or reboot bootloader (thou it is useless to use the bootloader if your volume rocker is not working)
Thanks all. I didn't have touch recovery, so I opened her up. Found out why the volume rocker didn't work. The circuit tape under the battery was ripped. Must have got caught on the battery somehow. Needless to say, the traces to the sim card were also torn. So she is dead!
Sent from my M470BSA using Tapatalk HD
glevitan said:
That is not a good idea. Then I get hundreds of PM and actually the forum is to be used....
---------- Post added at 02:31 PM ---------- Previous post was at 02:29 PM ----------
Turn off the device completely, then plug it to the pc and try typing adb reboot recovery or reboot bootloader (thou it is useless to use the bootloader if your volume rocker is not working)
Click to expand...
Click to collapse
i was refering to asking you inside the thread, not a p.m...sorry glevitan