I have an HTC Inspire running Cyanogenmod 10.1. Woke up this morning and powered up the phone. Stuck at the boot logo. The volume buttons don't work. I'm pretty sure if I clear the Dalvic cache, I'll be ok. Is there any way to do this, or flash a ROM through USB? Or is there another way to get the phone into recovery mode without using the volume keys?
If your volume buttons aren't fully working, I'm almost absolutely sure you can't. Then again, use a nail to push the volume down as far as you can. See if that works because I've had to do that before
Sent from my Inspire 4G using xda app-developers app
Download ROM manager or goomanager. There are options to boot into recovery on there.
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 02:29 AM ---------- Previous post was at 02:26 AM ----------
Or use adb
Adb reboot recovery;bootloader
Sent from my Inspire 4G using xda app-developers app
The pin idea didn't work. And how can I download rommanager or goomanager if I'm stuck at the boot logo?
Sent from my M470BSA using Tapatalk HD
I also said use adb
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
Pull out the darn battery. Leave out for a minute. Hold down power and volume down..let go of power button while keeping volume down pressed. Let go at boot logo. Try that. Or just try and use your adb. Sounds like using adb is your only option.
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 10:40 AM ---------- Previous post was at 10:38 AM ----------
Give a shoyt out to glevitan. He can help
Sent from my Inspire 4G using xda app-developers app
What he means is you can still send adb commands from the boot animation. Use that to get to recovery, and hopefully you have a touch recovery installed that doesn't require your volume buttons :fingers-crossed:
chrisb906 said:
I also said use adb
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
Pull out the darn battery. Leave out for a minute. Hold down power and volume down..let go of power button while keeping volume down pressed. Let go at boot logo. Try that. Or just try and use your adb. Sounds like using adb is your only option.
Sent from my Inspire 4G using xda app-developers app
Thanks
---------- Post added at 10:40 AM ---------- Previous post was at 10:38 AM ----------
Give a shoyt out to glevitan. He can help
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
Sent from my Inspire 4G using xda app-developers app
chrisb906 said:
I also said use adb
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
Pull out the darn battery. Leave out for a minute. Hold down power and volume down..let go of power button while keeping volume down pressed. Let go at boot logo. Try that. Or just try and use your adb. Sounds like using adb is your only option.
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 10:40 AM ---------- Previous post was at 10:38 AM ----------
Give a shoyt out to glevitan. He can help
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
That is not a good idea. Then I get hundreds of PM and actually the forum is to be used....
---------- Post added at 02:31 PM ---------- Previous post was at 02:29 PM ----------
Shadoevox said:
The pin idea didn't work. And how can I download rommanager or goomanager if I'm stuck at the boot logo?
Sent from my M470BSA using Tapatalk HD
Click to expand...
Click to collapse
Turn off the device completely, then plug it to the pc and try typing adb reboot recovery or reboot bootloader (thou it is useless to use the bootloader if your volume rocker is not working)
Thanks all. I didn't have touch recovery, so I opened her up. Found out why the volume rocker didn't work. The circuit tape under the battery was ripped. Must have got caught on the battery somehow. Needless to say, the traces to the sim card were also torn. So she is dead!
Sent from my M470BSA using Tapatalk HD
glevitan said:
That is not a good idea. Then I get hundreds of PM and actually the forum is to be used....
---------- Post added at 02:31 PM ---------- Previous post was at 02:29 PM ----------
Turn off the device completely, then plug it to the pc and try typing adb reboot recovery or reboot bootloader (thou it is useless to use the bootloader if your volume rocker is not working)
Click to expand...
Click to collapse
i was refering to asking you inside the thread, not a p.m...sorry glevitan
Related
i was connected the skyrocket to the pc and the debugging mode don't appear!!!!
You will have to unplug your device. Go into settings>applications>development and click USB Debugging.
I try it and nothing and installed the drives kies etc. I dont know why i cant
Sent from my SAMSUNG-SGH-I727 using XDA App
what are exactly are you trying to do with debugging on.....that requires you to plug up to a PC. are you rooting? or what?
Root
Sent from my SAMSUNG-SGH-I727 using XDA App
lesther312 said:
I try it and nothing and installed the drives kies etc. I dont know why i cant
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Hi,
Maybe because you installed the latest version of Kies.
I have the rogers version of the skyrocket and I can't get it to work with the latest version. Don't know why but many people have the same problem.
i found an older version that works well. the file version is Kies_2.0.3.11082_152_2
here's the link.
http://downloadcenter.samsung.com/conte.../Kies_2.0.3.11082_152_4.exe
lesther312 said:
Root
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
when you turn debugging on, and leave the setting screen and go back in does it still say that you have it on.
if so then it is ON.
what are you using to Root?
Skyrocket easy root
Sent from my SAMSUNG-SGH-I727 using XDA App
Are you on 2.3.5? Because east root will nt work on 2.3.6
---------- Post added at 10:20 PM ---------- Previous post was at 10:19 PM ----------
Delete kies reboot your pc, and install the version the person above posted
---------- Post added at 10:21 PM ---------- Previous post was at 10:20 PM ----------
Are you sure it does not recognize your phone? Or is easy root just not working?
I remove samsung kies and installed the old veraion and work fine for me
Sent from my SAMSUNG-SGH-I727 using XDA App
My son came to me this morning and said his phone wouldnt boot stuck at the google boot screen with the unlocked lock......u put a custom rom on there about a couple months ago and everything has been stable untill now can anyone point me in the right direction please
Update - now for some reason odin is not being recognized
Sent from my Nexus S 4G using xda premium
---------- Post added at 03:28 PM ---------- Previous post was at 03:27 PM ----------
That blank reply was to ask if you can get into recovery
Sent from my Nexus S 4G using xda premium
Maybe try to pull the battery then go into recovery.
Sent from my Nexus S 4G using Tapatalk 2
pandaman21 said:
Maybe try to pull the battery then go into recovery.
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
This. Then I would do a full wipe, and reflash Rom, or flash a different one altogether...
Sent from my Nexus S 4G using Tapatalk 2
I am trying to root my HTC Inspire 4G 2.3.5, i am on Windows Vista. Whenever i go to run the hack ace by Admin an error message like this pops up in the command prompt....
" file "sc" is missing or corrupt.
Your PC Windows ENV is damaged and should be repaired.
At least one default system file is missing, corrupt
or the Windows PC env has been otherwise compromised.
The Hack Kit quits before damage is done to your phone.
Retry with a different PC or try a 32-bit Ubuntu Linux LiveCD."
Is there something i can do or download to prevent this? or will i just have to use a different PC??
i have ran the Ubuntu and when i try it on there the same message appears in the terminal(command prompt).
PLEASE HELP
Hey liam.... try the advanced ace hack kit irc... #aahkSupport ... i tryed to do some digging into your issue and think they will get you up and running
Sent from my Nexus 7 using Tapatalk 2
Is your phone in debugging mode and fast boot off??
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 05:57 PM ---------- Previous post was at 05:56 PM ----------
Also what firmware is currently on your inspire?
Sent from my Inspire 4G using xda app-developers app
irc?
DJLamontagneIII said:
Hey liam.... try the advanced ace hack kit irc... #aahkSupport ... i tryed to do some digging into your issue and think they will get you up and running
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
i dont know how to get to the aahk irc, i typed it in the search all forums bar and ended up in some chat and i typed my problem and had no replies or anything.
phone
playerjunglejosh said:
Is your phone in debugging mode and fast boot off??
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 05:57 PM ---------- Previous post was at 05:56 PM ----------
Also what firmware is currently on your inspire?
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
my phone is on debugging mode and the fast boot is off, and firmware is 2.3.5 and im aware that i must downgrade to 2.3.3 but i get that error message before i can even get the rooting menu in command prompt.
If you could uninstall all antivirus programs and disable all firewalls...then re-download the AAHK....that could be the problem....
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 06:57 AM ---------- Previous post was at 06:55 AM ----------
Also press ctrl alt delete and stop as many programs that are running in the background...just don't stop the required programs like windows explorer and such as that
Sent from my Inspire 4G using xda app-developers app
---------- Post added at 07:04 AM ---------- Previous post was at 06:57 AM ----------
Also did you install the drivers provided by the AAHK?
Sent from my Inspire 4G using xda app-developers app
I got a notification this morning on my Droid Maxx for the OTA update that just came out. I told it to install this afternoon. After doing so, my phone rebooted, showed the progress of the update, and then about half way through showed me a form of the Android logo that said "failed" underneath. Ever since that, I cannot get my phone to fully boot. I tried clearing the cache from the recovery mode menu but that had no effect. I also cannot get the phone to boot into safe mode. My phone was not rooted so I'm not exactly sure why there was an issue with the update. Just wandering if anybody has any suggestions on what to do at this point? Worst case scenario I'm assuming I can restore to factory defaults but I would really like to avoid that if possible. Thanks in advance for the help!
Sounds like you should be able to FXZ and retain data to stock then take the update again.
Sent from my XT1080 using xda app-developers app
How do I perform FXZ?
bc760 said:
Sounds like you should be able to FXZ and retain data to stock then take the update again.
Sent from my XT1080 using xda app-developers app
Click to expand...
Click to collapse
Thank you for the suggestion! I'm pretty much a noob at this. Are there any good tutorials you would suggest that demonstrate how to do what you suggested? I found the following site: sbf.droid-developers. org/obake/list.php (had to put spaces in it in order to post it) I began downloading the second file in the list which I'm assuming is the correct one. I've gathered that you have to edit an XML file in package. But I'm not really sure what to edit and I'm not sure about how to get it to my phone. Do I use the Motorola Device Manager or the Android development tools?
You actually do not have to edit them you can use the xt1080 and copy them over. That's what I had thought also but you don't have to edit them.
Sent from my XT1080 using xda app-developers app
---------- Post added at 06:25 PM ---------- Previous post was at 06:25 PM ----------
Use the house of moto guide and the main guide that shows you how to set up
Sent from my XT1080 using xda app-developers app
---------- Post added at 06:26 PM ---------- Previous post was at 06:25 PM ----------
http://forum.xda-developers.com/showthread.php?t=2450702
Sent from my XT1080 using xda app-developers app
If you are trying to not lose you user data, i would remove the line
<step operation="erase" partition="userdata" />
from the .xml file before you try to apply with RSD
bc760 said:
You actually do not have to edit them you can use the xt1080 and copy them over. That's what I had thought also but you don't have to edit them.
Sent from my XT1080 using xda app-developers app
---------- Post added at 06:25 PM ---------- Previous post was at 06:25 PM ----------
Use the house of moto guide and the main guide that shows you how to set up
Sent from my XT1080 using xda app-developers app
---------- Post added at 06:26 PM ---------- Previous post was at 06:25 PM ----------
http://forum.xda-developers.com/showthread.php?t=2450702
Sent from my XT1080 using xda app-developers app
Click to expand...
Click to collapse
You don't have to remove any lines if you are using what is already zipped up, once you run house of moto it gives you the option to keep data.
Sent from my XT1080 using xda app-developers app
Will running the factory reset option on the Nexus S speed it up or will it not help? (it takes about 30 seconds to open gallery and 10s to open the phone app)...incredibly slow.
I would root it etc but i cant seem to get it to work, this is my thread where i describe my failure :
http://forum.xda-developers.com/nexus-s/help/q-t2484027
(there is one last recommendation in there that I hadnt noticed which I will try tonight).
give a try to pdanet. It will solve your problem. Otherwise i will tell you something more...
Sent from my Nexus S using XDA Premium 4 mobile app
---------- Post added at 04:30 PM ---------- Previous post was at 04:27 PM ----------
Is it android 1.0 driver in device manager when you put your phone into bootloader?
Sent from my Nexus S using XDA Premium 4 mobile app
Faizi Ch said:
give a try to pdanet. It will solve your problem. Otherwise i will tell you something more...
Sent from my Nexus S using XDA Premium 4 mobile app
---------- Post added at 04:30 PM ---------- Previous post was at 04:27 PM ----------
Is it android 1.0 driver in device manager when you put your phone into bootloader?
Sent from my Nexus S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It didnt work. I have 2 threads going to I will just compile all the info in this thread:
http://forum.xda-developers.com/nexus-s/help/q-t2484027
Tell me is it android 1.0 driver in device manager?
Sent from my Nexus S using XDA Premium 4 mobile app